| 1. |
- Giovanni, David, et al.
(författare)
-
Ultrafast long-range spin-funneling in solution-processed Ruddlesden-Popper halide perovskites
- 2019
-
Ingår i: Nature Communications. - : NATURE PUBLISHING GROUP. - 2041-1723. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- Room-temperature spin-based electronics is the vision of spintronics. Presently, there are few suitable material systems. Herein, we reveal that solution-processed mixed-phase Ruddlesden-Popper perovskite thin-films transcend the challenges of phonon momentum-scattering that limits spin-transfer in conventional semiconductors. This highly disordered system exhibits a remarkable efficient ultrafast funneling of photoexcited spin-polarized excitons from two-dimensional (2D) to three-dimensional (3D) phases at room temperature. We attribute this efficient exciton relaxation pathway towards the lower energy states to originate from the energy transfer mediated by intermediate states. This process bypasses the omnipresent phonon momentum-scattering in typical semiconductors with stringent band dispersion, which causes the loss of spin information during thermalization. Film engineering using graded 2D/3D perovskites allows unidirectional out-of-plane spin-funneling over a thickness of similar to 600 nm. Our findings reveal an intriguing family of solution-processed perovskites with extraordinary spin-preserving energy transport properties that could reinvigorate the concepts of spin-information transfer.
|
|
| 2. |
- Muduli, Subas Kumar, et al.
(författare)
-
Evolution of hydrogen by few-layered black phosphorus under visible illumination
- 2017
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 5:47, s. 24874-24879
-
Tidskriftsartikel (refereegranskat)abstract
- Recently, a new class of two-dimensional black phosphorus (BP) with a visible direct band gap is predicted as a potential candidate for photo-catalysis applications. Here, we present the first experimental evidence of hydrogen (H-2) evolution from aqueous solution by using BP (nanosheets and nanoparticles) under visible light illumination. Our experimental results describe that liquid phase exfoliated BP nanosheets and BP nanoparticles exhibit suitable energy level alignments for electron transfer and further proton reduction reactions in the solution under visible light illumination. Density functional theory (DFT) calculations predict that the H-2 evolution activity of bilayer BP is independent of edge or center positions, which is unique in BP as compared to those of other 2D materials.
|
|
| 3. |
- Ning, Weihua, et al.
(författare)
-
Long Electron-Hole Diffusion Length in High-Quality Lead-Free Double Perovskite Films
- 2018
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 30:20
-
Tidskriftsartikel (refereegranskat)abstract
- Developing environmentally friendly perovskites has become important in solving the toxicity issue of lead-based perovskite solar cells. Here, the first double perovskite (Cs2AgBiBr6) solar cells using the planar structure are demonstrated. The prepared Cs2AgBiBr6 films are composed of high-crystal-quality grains with diameters equal to the film thickness, thus minimizing the grain boundary length and the carrier recombination. These high-quality double perovskite films show long electron-hole diffusion lengths greater than 100 nm, enabling the fabrication of planar structure double perovskite solar cells. The resulting solar cells based on planar TiO2 exhibit an average power conversion efficiency over 1%. This work represents an important step forward toward the realization of environmentally friendly solar cells and also has important implications for the applications of double perovskites in other optoelectronic devices.
|
|
| 4. |
- Qing, Jian, et al.
(författare)
-
Aligned and Graded Type-II Ruddlesden-Popper Perovskite Films for Efficient Solar Cells
- 2018
-
Ingår i: Advanced Energy Materials. - : WILEY-V C H VERLAG GMBH. - 1614-6832 .- 1614-6840. ; 8:21
-
Tidskriftsartikel (refereegranskat)abstract
- Recently, Ruddlesden-Popper perovskites (RPPs) have attracted increasing interests due to their promising stability. However, the efficiency of solar cells based on RPPs is much lower than that based on 3D perovskites, mainly attributed to their poor charge transport. Herein, a simple yet universal method for controlling the quality of RPP films by a synergistic effect of two additives in the precursor solution is presented. RPP films achieved by this method show (a) high quality with uniform morphology, enhanced crystallinity, and reduced density of sub-bandgap states, (b) vertically oriented perovskite frameworks that facilitate efficient charge transport, and (c) type-II band alignment that favors self-driven charge separation. Consequently, a hysteresis-free RPP solar cell with a power conversion efficiency exceeding 12%, which is much higher than that of the control device (1.5%), is achieved. The findings will spur new developments in the fabrication of high-quality, aligned, and graded RPP films essential for realizing efficient and stable perovskite solar cells.
|
|
| 5. |
- Qing, Jian, et al.
(författare)
-
High-Quality Ruddlesden-Popper Perovskite Films Based on In Situ Formed Organic Spacer Cations
- 2019
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 31:41
-
Tidskriftsartikel (refereegranskat)abstract
- Ruddlesden-Popper perovskites (RPPs), consisting of alternating organic spacer layers and inorganic layers, have emerged as a promising alternative to 3D perovskites for both photovoltaic and light-emitting applications. The organic spacer layers provide a wide range of new possibilities to tune the properties and even provide new functionalities for RPPs. However, the preparation of state-of-the-art RPPs requires organic ammonium halides as the starting materials, which need to be ex situ synthesized. A novel approach to prepare high-quality RPP films through in situ formation of organic spacer cations from amines is presented. Compared with control devices fabricated from organic ammonium halides, this new approach results in similar (and even better) device performance for both solar cells and light-emitting diodes. High-quality RPP films are fabricated based on different types of amines, demonstrating the universality of the approach. This approach not only represents a new pathway to fabricate efficient devices based on RPPs, but also provides an effective method to screen new organic spacers with further improved performance.
|
|
| 6. |
|
|
| 7. |
- Yang, Jie, et al.
(författare)
-
Stable, High-Sensitivity and Fast-Response Photodetectors Based on Lead-Free Cs2AgBiBr6 Double Perovskite Films
- 2019
-
Ingår i: Advanced Optical Materials. - : WILEY-V C H VERLAG GMBH. - 2162-7568 .- 2195-1071. ; 7:13
-
Tidskriftsartikel (refereegranskat)abstract
- Solution-processed metal halide perovskites (MHPs) have demonstrated great advances on achieving high-performance photodetectors. However, the intrinsic material instability and the toxicity of lead still hinder the practical applications of MHPs-based photodetectors. In this work, the first highly sensitive and fast-response lead-free perovskite photodetectors based on Cs2AgBiBr6 double perovskite films are demonstrated. A convenient solution method is developed to deposit high-quality Cs2AgBiBr6 film with large grain sizes, low trap densities, and long charge carrier lifetimes. Incorporated within a photodiode device architecture comprised of optimized hole- and electron-transporting layers, lead-free perovskite photodetectors are achieved exhibiting a high detectivity of 3.29 x 10(12) Jones, a large linear dynamic range of 193 dB, and a fast response time of approximate to 17 ns. All the key figures of merit of the devices are comparable with the reported best-performing photodetectors based on lead halide perovskites. In addition, the resulting devices exhibit excellent thermal and environmental stability. The nonencapsulated devices show negligible degradation after thermal stressing at 150 degrees C and less than 5% degradation in the photoresponsivity after storage in ambient air for approximate to 2300 h. The results demonstrate the great potential of the lead-free Cs2AgBiBr6 double perovskite in applications for environmentally friendly and high-performance photodetectors.
|
|
| 8. |
- Zhao, Xin, et al.
(författare)
-
Simultaneous enhancement in charge separation and onset potential for water oxidation in a BiVO4 photoanode by W-Ti codoping
- 2018
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 6:35, s. 16965-16974
-
Tidskriftsartikel (refereegranskat)abstract
- Efficient charge separation of photo-generated electrons and holes is critical to achieve high solar to hydrogen conversion efficiency in photoelectrochemical (PEC) water splitting. N-type doping is generally used to improve the conductivity by increasing the majority carrier density and enhance the charge separation in the photoanode. However, minority carrier transport is also very important in the process of charge separation, especially in materials that possess inadequate minority carrier mobility. Herein, we take a BiVO4 PEC water splitting cell as an example to demonstrate how to analyze the limiting factor and to formulate the corresponding solutions to improve the hole mobility. The benefits and problems caused by n-type doping (W-doping here) of BiVO4 are analyzed. Codoping with Ti further enhances the charge separation by improving the hole transport and leads to a cathodic shift of the photocurrent onset potential. A high charge separation efficiency (79% at 1.23 V-RHE) in a compact BiVO4 photoanode has been achieved without any nanostructure formation. Theoretical results show that W-Ti codoping has decreased the hole polaron hopping activation energy by 11.5% compared with mono-W doping, and this has resulted in a hole mobility increase by 29%. The calculated adsorption energy and reaction Gibbs free energies indicate that the Ti site is energetically more favorable for water splitting. Moreover, the Ti site possesses a lower overpotential in the W-Ti codoped sample compared with the mono-W doped sample. The current study indicates that in order to improve the solar energy conversion efficiency, there should be a balanced charge transport of both majority and minority charge carriers. This can be achieved by simply choosing appropriate codoping elements.
|
|
