| 1. |
- Field, Dawn, et al.
(författare)
-
The minimum information about a genome sequence (MIGS) specification.
- 2008
-
Ingår i: Nature biotechnology. - : Springer Science and Business Media LLC. - 1546-1696 .- 1087-0156. ; 26:5, s. 541-7
-
Tidskriftsartikel (refereegranskat)abstract
- With the quantity of genomic data increasing at an exponential rate, it is imperative that these data be captured electronically, in a standard format. Standardization activities must proceed within the auspices of open-access and international working bodies. To tackle the issues surrounding the development of better descriptions of genomic investigations, we have formed the Genomic Standards Consortium (GSC). Here, we introduce the minimum information about a genome sequence (MIGS) specification with the intent of promoting participation in its development and discussing the resources that will be required to develop improved mechanisms of metadata capture and exchange. As part of its wider goals, the GSC also supports improving the 'transparency' of the information contained in existing genomic databases.
|
|
| 2. |
|
|
| 3. |
- Lynch, Sean R., et al.
(författare)
-
A comparison of physical properties, screening procedures and a human efficacy trial for predicting the bioavailability of commercial elemental iron powders used for food fortification
- 2007
-
Ingår i: INTERNATIONAL JOURNAL FOR VITAMIN AND NUTRITION RESEARCH. - : Hogrefe Publishing Group. - 0300-9831 .- 1664-2821. ; 77:2, s. 107-124
-
Tidskriftsartikel (refereegranskat)abstract
- Elemental iron powders are widely used to fortify staple foods. Experimental evidence indicates that there is considerable variation in the bioavailability of different products. For some powders, it may be too low to permit a significant impact on iron status. This study was designed to evaluate possible approaches to screening commercial iron powders for predicted bioavailability, to identify products that have the potential to improve iron status, and to ascertain whether bioavailability is related to the method of manufacture. Nine commercial iron powders were allocated to one of five types based on the production process; carbonyl, electrolytic, hydrogen-reduced (H-reduced), carbon monoxide-reduced (CO-reduced), and other reduced. Structure by scanning electron microscopy and physical properties (pycnometric and apparent density, particle size distribution, Fisher subsieve size, and surface area) were determined on all samples. Selected samples (one or more of each type depending on the cost of the assay) were then subjected to five screening procedures that have previously been advocated for predicting bioavailability in humans - dissolution rate in 0.1 mol/L HCl, dialyzability and Caco-2 cell iron uptake, both after simulated in vitro gastrointestinal digestion, relative bioavailability (RBV) with respect to ferrous sulfate by the AOAC rat hemoglobin repletion method, and plasma iron tolerance tests in human volunteers. The results for particle size distribution, surface area, Fisher subsieve size, dissolution rate in 0.1 mol/L HCl, and RBV in rats were significantly correlated and consistent for powders of the same type. However, values for different powder types were significantly different. There was no correlation between either dialyzability or Caco-2 cell uptake and the predicted bioavailability estimates based on the physical properties, dissolution rates, RBV in rats, or human efficacy data. Although human plasma iron tolerance tests were in general agreement with the other measures of predicted bioavailability, they did not provide information that would have improved the precision of bioavailability estimates based on physical properties, dissolution in HCl and/or RBV in rats. Our observations indicate that the dissolution rate in 0.1 mol/L HCl under standardized conditions is highly predictive of potential bioavailability and that it would be the most practical approach to developing a reliable and sensitive screening procedure for predicting and monitoring the bioavailability of commercial elemental iron powder products. Some, but not all, of the carbonyl and electrolytic iron powders had the highest predicted bioavailability values. The predicted bioavailability for the reduced iron products was lower and variable, with the lowest values being recorded for the carbon monoxide and other reduced iron products. Two powder types were selected for a human efficacy trial, electrolytic (because it is the iron powder type recommended by WHO) and hydrogen-reduced (because of its widespread use). Electrolytic/A131 and H-reduced/AC-325 had relative efficacies compared with ferrous sulfate monohydrate of 77% and 49%, respectively, based on the change in body iron stores in Thai women with low iron stores, who received an additional 12 mg iron per day, six days per week for 35 weeks in wheat-based snacks. We conclude that there is significant variability in the bioavailability of the commercial iron powders that we evaluated (those used for food fortification at the time that our studies were initiated), and that bioavailability is related in part to production method. The bioavailability of some carbonyl and electrolytic iron powders may be adequate for effective food fortification. The reduced iron powders that we tested are unlikely to have an adequate impact on iron nutrition at the fortification levels currently employed, although preliminary analysis of a new H-reduced product indicates that it may be possible to improve the bioavailability of individual powders of this type of product. We did find significant differences among products in both the electrolytic and carbonyl categories. Therefore, all products should be screened rigorously.
|
|
| 4. |
- Moschos, Sterghios Athanasios, et al.
(författare)
-
Lung delivery studies using siRNA conjugated to TAT(48-60) and penetratin reveal peptide induced reduction in gene expression and induction of innate immunity
- 2007
-
Ingår i: Bioconjugate Chemistry. - : American Chemical Society (ACS). - 1520-4812 .- 1043-1802. ; 18:5, s. 1450-1459
-
Tidskriftsartikel (refereegranskat)abstract
- The therapeutic application of siRNA shows promise as an alternative approach to small-molecule inhibitors for the treatment of human disease. However, the major obstacle to its use has been the difficulty in delivering these large anionic molecules in vivo. In this study, we have investigated whether siRNA-mediated knockdown of p38 MAP kinase mRNA in mouse lung is influenced by conjugation to the nonviral delivery vector cholesterol and the cell penetrating peptides (CPP) TAT(48-60) and penetratin. Initial studies in the mouse fibroblast L929 cell line showed that siRNA conjugated to cholesterol, TAT(48-60), and penetratin, but not siRNA alone, achieved a limited reduction of p38 MAP kinase mRNA expression. Intratracheal administration of siRNA resulted in localization within macrophages and scattered epithelial cells and produced a 30-45% knockdown of p38 MAP kinase mRNA at 6 h. As with increasing doses of siRNA, conjugation to cholesterol improved upon the duration but not the magnitude of mRNA knockdown, while penetratin and TAT(48-60) had no effect. Importantly, administration of the penetratin or TAT(48-60) peptides alone caused significant reduction in p38 MAP kinase mRNA expression, while the penetratin-siRNA conjugate activated the innate immune response. Overall, these studies suggest that conjugation to cholesterol may extend but not increase siRNA-mediated p38 MAP kinase mRNA knockdown in the lung. Furthermore, the use of CPP may be limited due to as yet uncharacterized effects upon gene expression and a potential for immune activation.
|
|
| 5. |
- Bossi, Alessandra, et al.
(författare)
-
Patterned gallium surfaces as molecular mirrors
- 2007
-
Ingår i: Biosensors & bioelectronics. - : Elsevier. - 0956-5663 .- 1873-4235. ; 23:2, s. 290-294
-
Tidskriftsartikel (refereegranskat)abstract
- An entirely new means of printing molecular information on a planar film, involving casting nanoscale impressions of the template protein molecules in molten gallium, is presented here for the first time. The metallic imprints not only replicate the shape and size of the proteins used as template. They also show specific binding for the template species. Such a simple approach to the creation of antibody-like properties in metallic mirrors can lead to applications in separations, microfluidic devices, and the development of new optical and electronic sensors, and will be of interest to chemists, materials scientists, analytical specialists, and electronic engineers.
|
|
| 6. |
- Cardeña, Etzel, et al.
(författare)
-
Dissociative disorders
- 2007
-
Ingår i: Adult psychopathology and diagnosis. - 9780471745846 - 0471745847 ; Fifth edition, s. 473-503
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)
|
|
| 7. |
|
|
| 8. |
- Kyprianou, Dimitris, et al.
(författare)
-
New reactive polymer for protein immobilisation on sensor surfaces
- 2009
-
Ingår i: Biosensors & bioelectronics. - : Elsevier Science B.V., Amsterdam.. - 0956-5663 .- 1873-4235. ; 24:5, s. 1365-1371
-
Tidskriftsartikel (refereegranskat)abstract
- Immobilisation of biorecognition elements on transducer surfaces is a key step in the development of biosensors. The immobilisation needs to be fast, cheap and most importantly should not affect the biorecognition activity of the immobilised receptor. A novel protocol for the covalent immobilisation of biomolecules containing primary amines using an inexpensive and simple polymer is presented. This tridimensional (3D) network leads to a random immobilisation of antibodies on the polymer and ensures the availability of a high percentage of antibody binding sites. The reactivity of the polymer is based on the reaction between primary amines and thioacetal groups included in the polymer network. These functional groups (thioacetal) do not need any further activation in order to react with proteins, making it attractive for sensor fabrication. The novel polymer also contains thiol derivative groups (disulphide groups or thioethers) that promote self-assembling on a metal transducer surface. For demonstration purposes the polymer was immobilised on Au Biacore chips. The resulting polymer layer was characterised using contact angle meter, atomic force microscopy (AFM) and ellipsometry. A general protocol suitable for the immobilisation of bovine serum albumin (BSA), enzymes and antibodies such as polyclonal anti-microcystin-LR antibody and monoclonal anti-prostate specific antigen (anti-PSA) antibody was then optimised. The affinity characteristics of developed immunosensors were investigated in reaction with microcystin-LR, and PSA. The calculated detection limit for analytes depended on the properties of antibodies. The detection limit for microcystin-LR was 10 ng mL(-1) and for PSA 0.01 ng mL(-1). The non-specific binding of analytes to synthesised polymers was very low. The polymer-coated chips were stored for up to 2 months without any noticeable deterioration in their ability to react with proteins. These findings make this new polymer very promising for the development of low-cost, easy to prepare and sensitive biosensors. (C) 2008 Elsevier B.V. All rights reserved.
|
|
| 9. |
- Northen, Trent R, et al.
(författare)
-
High surface area of porous silicon drives desorption of intact molecules.
- 2007
-
Ingår i: Journal of the American Society for Mass Spectrometry. - : American Chemical Society (ACS). - 1044-0305 .- 1879-1123. ; 18:11, s. 1945-9
-
Tidskriftsartikel (refereegranskat)abstract
- The surface structure of porous silicon used in desorption/ionization on porous silicon (DIOS) mass analysis is known to play a primary role in the desorption/ionization (D/I) process. In this study, mass spectrometry and scanning electron microscopy (SEM) are used to examine the correlation between intact ion generation with surface ablation and surface morphology. The DIOS process is found to be highly laser energy dependent and correlates directly with the appearance of surface ions (Si(n)(+) and OSiH(+)). A threshold laser energy for DIOS is observed (10 mJ/cm(2)), which supports that DIOS is driven by surface restructuring and is not a strictly thermal process. In addition, three DIOS regimes are observed that correspond to surface restructuring and melting. These results suggest that higher surface area silicon substrates may enhance DIOS performance. A recent example that fits into this mechanism is the surface of silicon nanowires, which has a high surface energy and concomitantly requires lower laser energy for analyte desorption.
|
|
| 10. |
|
|
