| 1. |
- Krause, Maximilian, et al.
(författare)
-
Microscopic insight into the impact of the KF post-deposition treatment on optoelectronic properties of (Ag,Cu)(In,Ga)Se2 solar cells
- 2022
-
Ingår i: Progress in Photovoltaics. - : John Wiley & Sons. - 1062-7995 .- 1099-159X. ; 30:1, s. 109-115
-
Tidskriftsartikel (refereegranskat)abstract
- It is attractive to alloy Cu(In,Ga)Se2 solar-cell absorbers with Ag (ACIGSe), since they lead to similar device performances as the Ag-free absorber layers, while they can be synthesized at much lower deposition temperatures. However, a KF post-deposition treatment (PDT) of the ACIGSe absorber surface is necessary to achieve higher open-circuit voltages (Voc). The present work provides microscopic insights to the effects of this KF PDT, employing correlative scanning-electron microscope techniques on identical positions of cross-sectional specimens of the cell stacks. We found that the increase in Voc after the KF PDT can be explained by the removal of Cu-poor, Ag-poor, and Ga-rich regions near the ACIGSe/CdS interface. The KF PDT leads, when optimally doped, to a very thin K-Ag-Cu-Ga-In-Se layer between ACIGSe and CdS. If the KF dose is too large, we find that Cu-poor and K-rich regions form near the ACIGSe/CdS interface with enhanced nonradiative recombination which explains a decrease in the Voc. This effect occurs in addition to the presence of a (K,Ag,Cu)InSe2 intermediate layer, that might be responsible for limiting the short-current density of the solar cells due to a current blocking behavior.
|
|
| 2. |
- Näsström, Hampus, et al.
(författare)
-
Combinatorial inkjet printing for compositional tuning of metal-halide perovskite thin films
- 2022
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 10:9, s. 4906-4914
-
Tidskriftsartikel (refereegranskat)abstract
- To accelerate the materials discovery and development process for a sustainable technology advancement it is imperative to explore and develop combined high-throughput material synthesis and analysis workflows. In this work, we investigate a method of combinatorial inkjet-printing to tune the composition of the inorganic cesium lead mixed halide perovskite solid solution, CsPb(BrxI1-x)3. The compositional variation is achieved by simultaneous printing of different precursor inks with multiple printheads and controlled by varying the number of droplets printed by each printhead throughout the sample. The droplet placement is optimised through an algorithm that allows maximum mixing of the combined inks. The local compositional homogeneity of thin-film samples was investigated as a function of the printing resolution by micrometer-resolution X-ray fluorescence and synchrotron-based grazing-incidence wide-angle X-ray scattering. We show that a combinatorial library of ten compositions between CsPbI3 and CsPbBr2I, printed using the developed algorithm, is locally homogeneous for the optimised printing parameters. An implementation of the algorithm in the high-level programming language Python is provided for easy use in other systems.
|
|
| 3. |
- Phung, Nga, et al.
(författare)
-
Photoprotection in metal halide perovskites by ionic defect formation
- 2022
-
Ingår i: Joule. - : Elsevier BV. - 2542-4351. ; 6:9, s. 2152-2174
-
Tidskriftsartikel (refereegranskat)abstract
- Photostability is critical for long-term solar cell operation. While light-triggered defects are usually reported as evidence of material degradation, we reveal that the formation of certain defects in metal halide perovskites is crucial for protection against intense or prolonged light exposure. We identify an inherent self-regulating cycle of formation and recovery of ionic defects under light exposure that mitigates the overheating of the lattice due to hot carrier cooling, which allows exposure to several thousand suns without degrading. The excess energy instead dissipates by forming defects, which in turn alters the optoelectronic properties of the absorber, resulting in a temporary reduction of photon absorption. Defects gradually recover to restore the original optoelectronic properties of the absorber. Photoprotection is a key feature for the photostability in plants. Thus, finding a protection mechanism in metal halide perovskites similar to those in nature is encouraging for the development of long-term sustainable solar cells.
|
|
