| 1. |
- Ajjan, Fátima, et al.
(författare)
-
Scalable Asymmetric Supercapacitors Based on Hybrid Organic/Biopolymer Electrodes
- 2017
-
Ingår i: ADVANCED SUSTAINABLE SYSTEMS. - : WILEY-V C H VERLAG GMBH. - 2366-7486. ; 1:8
-
Tidskriftsartikel (refereegranskat)abstract
- A trihybrid bioelectrode composed of lignin, poly(3,4-ethylenedioxythiophene) (PEDOT), and poly(aminoanthraquinone) (PAAQ) is prepared by a two-step galvanostatic electropolymerization, and characterized for supercapacitor applications. Using PEDOT/Lignin as a base layer, followed by the consecutive deposition of PAAQ, the hybrid electrode PEDOT/Lignin/PAAQ shows a high specific capacitance of 418 F g(-1) with small self-discharge. This trihybrid electrode material can be assembled into symmetric and asymmetric super-capacitors. The asymmetric supercapacitor uses PEDOT + Lignin/PAAQ as positive electrode and PEDOT/PAAQ as negative electrode, and exhibits superior electrochemical performance due to the synergistic effect of the two electrodes, which leads to a specific capacitance of 74 F g(-1). It can be reversibly cycled in the voltage range of 0-0.7 V. More than 80% capacitance is retained after 10 000 cycles. These remarkable features reveal the exciting potential of a full organic energy storage device with long cycle life.
|
|
| 2. |
- Anwar, Nargis, et al.
(författare)
-
Redox switching of polyoxometalate-doped polypyrrole films in ionic liquid media
- 2018
-
Ingår i: Electrochimica Acta. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0013-4686 .- 1873-3859. ; 265, s. 254-258
-
Tidskriftsartikel (refereegranskat)abstract
- The surface immobilization of the parent Dawson polyoxometalate (POM) as a counter-ion for the electropolymerization of polypyrrole (PPy) or as an electrode-adhered solid was utilized for voltammetric studies of the surface adhered POM in room temperature ionic liquids (RTIL). Illustrating the efficiency of intermediate stabilization, voltammetry at POM-modified electrodes in a PF6-based RTIL revealed richer redox behaviour and higher stabilization in comparison with aqueous electrolytes and with BF4-based RTIL, respectively. High stability of the POM-doped PPy towards continuous charge-discharge voltammetric redox cycles was confirmed by minor changes in film morphology observed after the cycling in RTILs. (c) 2017 Elsevier Ltd. All rights reserved.
|
|
| 3. |
- Cattelan, Mattia, et al.
(författare)
-
Anodization study of epitaxial graphene : insights on the oxygen evolution reaction of graphitic materials
- 2019
-
Ingår i: Nanotechnology. - : Institute of Physics Publishing (IOPP). - 0957-4484 .- 1361-6528. ; 30:28
-
Tidskriftsartikel (refereegranskat)abstract
- The photoemission electron microscopy and x-ray photoemission spectroscopy were utilized for the study of anodized epitaxial graphene (EG) on silicon carbide as a fundamental aspect of the oxygen evolution reaction on graphitic materials. The high-resolution analysis of surface morphology and composition quantified the material transformation during the anodization. We investigated the surface with lateral resolution amp;lt;150 nm, revealing significant transformations on the EG and the role of multilayer edges in increasing the film capacitance.
|
|
| 4. |
- Che, Canyan, et al.
(författare)
-
Conducting Polymer Electrocatalysts for Proton-Coupled Electron Transfer Reactions: Toward Organic Fuel Cells with Forest Fuels
- 2018
-
Ingår i: Advanced Sustainable Systems. - : Wiley-Blackwell. - 2366-7486. ; 317
-
Tidskriftsartikel (refereegranskat)abstract
- Lignin is one of the most abundant biopolymers, constituting 25% of plants. The pulp and paper industries extract lignin in their process and today seek new applications for this by-product. Here, it is reported that the aromatic alcohols obtained from lignin depolymerization can be used as fuel in high power density electrical power sources. This study shows that the conducting polymer poly(3,4-ethylenedioxythiophene), fabricated from abundant ele-ments via low temperature synthesis, enables efficient, direct, and reversible chemical-to-electrical energy conversion of aromatic alcohols such as lignin residues in aqueous media. A material operation principle related to the rela-tively high molecular diffusion and ionic conductivity within the conducting polymer matrix, ensuring efficient uptake of protons in the course of proton-coupled electron transfers between organic molecules is proposed.
|
|
| 5. |
- Che, Canyan, 1988-
(författare)
-
Electrochemical Reactions of Quinones at Conducting Polymer Electrodes
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Proton-coupled multielectron transfer reactions are of great abundance in Nature. In particular, two-proton-two-electron transfers in quinone/hydroquinone redox couples are behind oxidative phosphorylation (ADP-to-ATP) and photosystem II. The redox processes of neurotransmitters, as a platform for brain activity read-out, are two-proton two-electron transfers of quinones. Moreover, humic acids, which constitute a major organic fraction of soil, turf, coal, and lignin, which forms as a large-scale surplus product from forest and paper industry, contain a large quantity of polyphenols, which can undergo the exchange of two electrons per aromatic ring accompanied with transfers of two protons. This makes polyphenol-based biopolymers, such as lignin, promising green-chemistry renewable materials for electrical energy storage or generation. The application of intact or depolymerized polyphenols in electrical energy devices such as fuel cells and redox flow batteries requires appropriate electrode materials to ensure efficient proton-coupled electron transfer reactions occurring at the solid-liquid interface. Moreover, investigation of the biological quinones reaction calls for porous, soft, biocompatible materials as implantable devices to reduce the rejection reaction and pain.At common electrode materials such as platinum and carbons, quinone/hydroquinone redox processes are rather irreversible; in addition, platinum is very costly. Conducting polymers (CPs), poly(3,4-ethylenedioxythiophene) (PEDOT) in particular, offer an attractive option as metal-free electrode material for these reactions due to their molecular porosity, high electrical and ionic conductivity, solution processability, resistance to acid media, as well as high atomic abundance of their constituents.This thesis explores the possibility of utilizing CPs as electrode materials for driving various quinone redox reactions. Firstly, we studied the electrocatalytic activity and mechanism of PEDOTs for the generic hydroquinone reaction and their application in a fuel cell. Secondly, the mechanism of integrating lignosulfonate (LS) into CP matrices and optimization strategies were explored in order to boost energy storage capacity. Thirdly, we attained mechanistic understanding of the influence of ionic transport and proton management on the thermodynamics and kinetics of the electrocatalysis on CPs, thereby providing steps towards the design of quinone-based electrical energy storage devices, such as organic redox flow batteries (ORFB).
|
|
| 6. |
- Che, Canyan, 1988-, et al.
(författare)
-
Twinning Lignosulfonate with a Conducting Polymer via Counter-Ion Exchange for Large-Scale Electrical Storage
- 2019
-
Ingår i: Advanced Sustainable Systems. - : Wiley-VCH Verlag. - 2366-7486. ; 3:9
-
Tidskriftsartikel (refereegranskat)abstract
- Lignosulfonate (LS) is a large-scale surplus product of the forest and paper industries, and has primarily been utilized as a low-cost plasticizer in making concrete for the construction industry. LS is an anionic redox-active polyelectrolyte and is a promising candidate to boost the charge capacity of the positive electrode (positrode) in redox-supercapacitors. Here, the physical-chemical investigation of how this biopolymer incorporates into the conducting polymer PEDOT matrix, of the positrode, by means of counter-ion exchange is reported. Upon successful incorporation, an optimal access to redox moieties is achieved, which provides a 63% increase of the resulting stored electrical charge by reversible redox interconversion. The effects of pH, ionic strength, and concentrations, of included components, on the polymer–polymer interactions are optimized to exploit the biopolymer-associated redox currents. Further, the explored LS-conducting polymer incorporation strategy, via aqueous synthesis, is evaluated in an up-scaling effort toward large-scale electrical energy storage technology. By using an up-scaled production protocol, integration of the biopolymer within the conducting polymer matrix by counter-ion exchange is confirmed and the PEDOT-LS synthesized through optimized strategy reaches an improved charge capacity of 44.6 mAh g−1.
|
|
| 7. |
- Gryszel, Maciej, et al.
(författare)
-
Organic heterojunction photocathodes for optimized photoelectrochemical hydrogen peroxide production
- 2018
-
Ingår i: Journal of Materials Chemistry A. - : ROYAL SOC CHEMISTRY. - 2050-7488 .- 2050-7496. ; 6:48, s. 24709-24716
-
Tidskriftsartikel (refereegranskat)abstract
- Solar-to-chemical conversion of sunlight into hydrogen peroxide as a chemical fuel is an emerging carbon-free sustainable energy strategy. The process is based on the reduction of dissolved oxygen to hydrogen peroxide. Only limited amounts of photoelectrode materials have been successfully explored for photoelectrochemical production of hydrogen peroxide. Herein we detail approaches to produce robust organic semiconductor photocathodes for peroxide evolution. They are based on evaporated donor-acceptor heterojunctions between phthalocyanine and tetracarboxylic perylenediimide, respectively. These small molecules form nanocrystalline films with good operational stability and high surface area. We discuss critical parameters which allow fabrication of efficient devices. These photocathodes can support continuous generation of high concentrations of peroxide with faradaic efficiency remaining at around 70%. We find that an advantage of the evaporated heterojunctions is that they can be readily vertically stacked to produce tandem cells which produce higher voltages. This feature is desirable for fabricating two-electrode photoelectrochemical cells. Overall, the photocathodes presented here have the highest performance reported to date in terms of photocurrent for peroxide production. These results offer a viable method for peroxide photosynthesis and provide a roadmap of strategies that can be used to produce photoelectrodes with even higher efficiency and productivity.
|
|
| 8. |
- Ibupoto, Zafar, et al.
(författare)
-
MoSx@NiO Composite Nanostructures : An Advanced Nonprecious Catalyst for Hydrogen Evolution Reaction in Alkaline Media
- 2019
-
Ingår i: Advanced Functional Materials. - : John Wiley & Sons. - 1616-301X .- 1616-3028. ; 29:7
-
Tidskriftsartikel (refereegranskat)abstract
- The design of the earth‐abundant, nonprecious, efficient, and stable electrocatalysts for efficient hydrogen evolution reaction (HER) in alkaline media is a hot research topic in the field of renewable energies. A heterostructured system composed of MoSx deposited on NiO nanostructures (MoSx@NiO) as a robust catalyst for water splitting is proposed here. NiO nanosponges are applied as cocatalyst for MoS2 in alkaline media. Both NiO and MoS2@NiO composites are prepared by a hydrothermal method. The NiO nanostructures exhibit sponge‐like morphology and are completely covered by the sheet‐like MoS2. The NiO and MoS2 exhibit cubic and hexagonal phases, respectively. In the MoSx@NiO composite, the HER experiment in 1 m KOH electrolyte results in a low overpotential (406 mV) to produce 10 mA cm−2 current density. The Tafel slope for that case is 43 mV per decade, which is the lowest ever achieved for MoS2‐based electrocatalyst in alkaline media. The catalyst is highly stable for at least 13 h, with no decrease in the current density. This simple, cost‐effective, and environmentally friendly methodology can pave the way for exploitation of MoSx@NiO composite catalysts not only for water splitting, but also for other applications such as lithium ion batteries, and fuel cells.
|
|
| 9. |
- Imar, Shahzad, et al.
(författare)
-
Enhancement of Nitrite and Nitrate Electrocatalytic Reduction through the Employment of Self-Assembled Layers of Nickel- and Copper-Substituted Crown-Type Heteropolyanions
- 2015
-
Ingår i: Langmuir. - : American Chemical Society. - 0743-7463 .- 1520-5827. ; 31:8, s. 2584-2592
-
Tidskriftsartikel (refereegranskat)abstract
- Multilayer assemblies of two crown-type type heteropolyanions (HPA), [Cu20Cl(OH)(24)(H2O)(12)(P8W48O184)](25-) and Ni-4(P8W48O148)(WO2)](28-), have been immobilized onto glassy carbon electrode surfaces via the layer-by-layer (LBL) technique employing polycathion-stabilized silver nanoparticles (AgNP) as the cationic layer within the resulting thin films characterized by electrochemical and physical methods. The redox behaviors of both HPA monitored during LBL assembly with cyclic voltammetry and impedance spectroscopy revealed significant changes by immobilization. The presence of AgNPs led to the retention of film porosity and electronic conductivity, which has been shown with impedance and voltammeric studies of film permeabilities toward reversible redox probes. The resulting films have been characterized by physical methods. Finally, the electrocatalytic performance of obtained films with respect to nitrite and nitrate electrocatalytic reduction has been comparatively studied for both catalysts. Nickel atoms trapped inside HPA exhibited a higher specific activity for reduction.
|
|
| 10. |
- Imar, Shahzad, et al.
(författare)
-
Nitrate and Nitrite Electrocatalytic Reduction at Layer-by-Layer Films Composed of Dawson-type Heteropolyanions Mono-substituted with Transitional Metal Ions and Silver Nanoparticles
- 2015
-
Ingår i: Electrochimica Acta. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0013-4686 .- 1873-3859. ; 184, s. 323-330
-
Tidskriftsartikel (refereegranskat)abstract
- A series of Dawson-type heteropolyanions (HPAs) mono-substituted with transitional metal ions ((alpha 2)- [P2W17O61FeIII](8-), (alpha 2)-[P2W17O61CuII](8-) and (alpha 2)-[P2W17O61NiII](8-)) have exhibited electrocatalytic properties towards nitrate and nitrite reduction in slightly acidic media (pH 4.5). The immobilization of these HPAs into water-processable films developed via layer-by layer assembly with polymer-stabilized silver nanoparticles led to the fabrication of the electrocatalytic interfaces for both nitrate and nitrite reduction. The LBL assembly as well as the changes in the HPA properties by immobilization has been characterized by electrochemical methods. The effects of the substituent ions, outer layers and the cationic moieties utilized for the films assembly of the developed film on the performances of nitrate electrocatalysis has been elucidated. (C) 2015 Elsevier Ltd. All rights reserved.
|
|
