| 1. |
- Blanken, T. C., et al.
(författare)
-
Real-time plasma state monitoring and supervisory control on TCV
- 2019
-
Ingår i: Nuclear Fusion. - : Institute of Physics (IOP). - 0029-5515 .- 1741-4326. ; 59:2
-
Tidskriftsartikel (refereegranskat)abstract
- In ITER and DEMO, various control objectives related to plasma control must be simultaneously achieved by the plasma control system (PCS), in both normal operation as well as off-normal conditions. The PCS must act on off-normal events and deviations from the target scenario, since certain sequences (chains) of events can precede disruptions. It is important that these decisions are made while maintaining a coherent prioritization between the real-time control tasks to ensure high-performance operation. In this paper, a generic architecture for task-based integrated plasma control is proposed. The architecture is characterized by the separation of state estimation, event detection, decisions and task execution among different algorithms, with standardized signal interfaces. Central to the architecture are a plasma state monitor and supervisory controller. In the plasma state monitor, discrete events in the continuous-valued plasma state arc modeled using finite state machines. This provides a high-level representation of the plasma state. The supervisory controller coordinates the execution of multiple plasma control tasks by assigning task priorities, based on the finite states of the plasma and the pulse schedule. These algorithms were implemented on the TCV digital control system and integrated with actuator resource management and existing state estimation algorithms and controllers. The plasma state monitor on TCV can track a multitude of plasma events, related to plasma current, rotating and locked neoclassical tearing modes, and position displacements. In TCV experiments on simultaneous control of plasma pressure, safety factor profile and NTMs using electron cyclotron heating (ECI I) and current drive (ECCD), the supervisory controller assigns priorities to the relevant control tasks. The tasks are then executed by feedback controllers and actuator allocation management. This work forms a significant step forward in the ongoing integration of control capabilities in experiments on TCV, in support of tokamak reactor operation.
|
|
| 2. |
- De Angeli, M., et al.
(författare)
-
Pre-plasma remobilization of ferromagnetic dust in FTU and possible interference with tokamak operations
- 2019
-
Ingår i: Nuclear Fusion. - : IOP PUBLISHING LTD. - 0029-5515 .- 1741-4326. ; 59:10
-
Tidskriftsartikel (refereegranskat)abstract
- Experimental evidence of the pre-plasma remobilization of ferromagnetic dust in FTU is presented. Thomson scattering data and IR camera observations document the occurrence of intrinsic dust remobilization prior to discharge start-up and allow for a rough calculation of the average mobilized dust density. Exposures of calibrated extrinsic non-magnetic and ferromagnetic dust to sole magnetic field discharges reveal that the magnetic moment force is the main mobilizing force, as confirmed by theoretical estimates. Pre-plasma remobilization probabilities are computed for varying dust sizes. The impact of prematurely remobilized dust on the breakdown and burn-through start-up phases is investigated together with the discharge termination induced once the plasma plateau is established.
|
|
| 3. |
- Ratynskaia, Svetlana, et al.
(författare)
-
Elastic-plastic adhesive impacts of tungsten dust with metal surfaces in plasma environments
- 2015
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 463, s. 877-880
-
Tidskriftsartikel (refereegranskat)abstract
- Dust-surface collisions impose size selectivity on the ability of dust grains to migrate in scrape-off layer and divertor plasmas and to adhere to plasma-facing components. Here, we report first experimental evidence of dust impact phenomena in plasma environments concerning low-speed collisions of tungsten dust with tungsten surfaces: re-bouncing, adhesion, sliding and rolling. The results comply with the predictions of the model of elastic-perfectly plastic adhesive spheres employed in the dust dynamics code MIGRAINe for sub- to several meters per second impacts of micrometer-range metal dust.
|
|
| 4. |
- Ratynskaia, Svetlana, et al.
(författare)
-
Interaction of adhered metallic dust with transient plasma heat loads
- 2016
-
Ingår i: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 56
-
Tidskriftsartikel (refereegranskat)abstract
- The first study of the interaction of metallic dust (tungsten, aluminum) adhered on tungsten substrates with transient plasma heat loads is presented. Experiments were carried out in the Pilot-PSI linear device with transient heat fluxes up to 550 MW m(-2) and in the DIII-D divertor tokamak. The central role of the dust-substrate contact area in heat conduction is highlighted and confirmed by heat transfer simulations. The experiments provide evidence of the occurrence of wetting-induced coagulation, a novel growth mechanism where cluster melting accompanied by droplet wetting leads to the formation of larger grains. The physical processes behind this mechanism are elucidated. The remobilization activity of the newly formed dust and the survivability of tungsten dust on hot surfaces are documented and discussed in the light of implications for ITER.
|
|
| 5. |
- Ratynskaia, Svetlana V., et al.
(författare)
-
Tungsten dust remobilization under steady-state and transient plasma conditions
- 2017
-
Ingår i: NUCLEAR MATERIALS AND ENERGY. - : Elsevier. - 2352-1791. ; 12, s. 569-574
-
Tidskriftsartikel (refereegranskat)abstract
- Remobilization is one of the most prominent unresolved fusion dust-relevant issues, strongly related to the lifetime of dust in plasma-wetted regions, the survivability of dust on hot plasma-facing surfaces and the formation of dust accumulation sites. A systematic cross-machine study has been initiated to investigate the remobilization of tungsten micron-size dust from tungsten surfaces implementing a newly developed technique based on controlled pre-adhesion by gas dynamics methods. It has been utilized in a number of devices and has provided new insights on remobilization under steady-state and transient conditions. The experiments are interpreted with contact mechanics theory and heat conduction models.
|
|
| 6. |
- Shalpegin, A., et al.
(författare)
-
Fast camera observations of injected and intrinsic dust in TEXTOR
- 2015
-
Ingår i: Plasma Physics and Controlled Fusion. - : Institute of Physics (IOP). - 0741-3335 .- 1361-6587. ; 57:12
-
Tidskriftsartikel (refereegranskat)abstract
- Stereoscopic fast camera observations of pre-characterized carbon and tungsten dust injection in TEXTOR are reported, along with the modelling of tungsten particle trajectories with MIGRAINe. Particle tracking analysis of the video data showed significant differences in dust dynamics: while carbon flakes were prone to agglomeration and explosive destruction, spherical tungsten particles followed quasi-inertial trajectories. Although this inertial nature prevented any validation of the force models used in MIGRAINe, comparisons between the experimental and simulated lifetimes provide a direct evidence of dust temperature overestimation in dust dynamics codes. Furthermore, wide-view observations of the TEXTOR interior revealed the main production mechanism of intrinsic carbon dust, as well as the location of probable dust remobilization sites.
|
|
| 7. |
- Shalpegin, A., et al.
(författare)
-
Highly resolved measurements of dust motion in the sheath boundary of magnetized plasmas
- 2015
-
Ingår i: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 55:11
-
Tidskriftsartikel (refereegranskat)abstract
- Dust trajectories have been recorded with an unprecedented, under fusion-relevant plasma conditions, spatial resolution of 9 mu m/pixel in Pilot-PSI. The optical setup allowed the use of fast cameras as a basic microscope. It is demonstrated that such a resolution is essential for the correct interpretation of experiments on several aspects of dust-surface interactions. Highly resolved tungsten dust dynamics measurements are presented from dedicated experiments on dust collisions with plasma facing components, motion in the vicinity of castellated samples and remobilization from planar samples.
|
|
| 8. |
- Tierens, W., et al.
(författare)
-
Validation of the ICRF antenna coupling code RAPLICASOL against TOPICA and experiments
- 2019
-
Ingår i: Nuclear Fusion. - : IOP PUBLISHING LTD. - 0029-5515 .- 1741-4326. ; 59:4
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper we validate the finite element code RAPLICASOL, which models radiofrequency wave propagation in edge plasmas near ICRF antennas, against calculations with the TOPICA code. We compare the output of both codes for the ASDEX Upgrade 2-strap antenna, and for a 4-strap WEST-like antenna. Although RAPLICASOL requires considerably fewer computational resources than TOPICA, we find that the predicted quantities of experimental interest (including reflection coefficients, coupling resistances, S- and Z-matrix entries, optimal matching settings, and even radiofrequency electric fields) are in good agreement provided we are careful to use the same geometry in both codes.
|
|
| 9. |
- Tolias, Panagiotis, et al.
(författare)
-
Dust remobilization in fusion plasmas under steady state conditions
- 2016
-
Ingår i: Plasma Physics and Controlled Fusion. - : Institute of Physics (IOP). - 0741-3335 .- 1361-6587. ; 58:2
-
Tidskriftsartikel (refereegranskat)abstract
- The first combined experimental and theoretical studies of dust remobilization by plasma forces are reported. The main theoretical aspects of remobilization in fusion devices under steady state conditions are analyzed. In particular, the dominant role of adhesive forces is highlighted and generic remobilization conditions-direct lift-up, sliding, rolling-are formulated. A novel experimental technique is proposed, based on controlled adhesion of dust grains on tungsten samples combined with detailed mapping of the dust deposition profile prior and post plasma exposure. Proof-of-principle experiments in the TEXTOR tokamak and the EXTRAP-T2R reversed-field pinch are presented. The versatile environment of the linear device Pilot-PSI allowed for experiments with different magnetic field topologies and varying plasma conditions that were complemented with camera observations.
|
|
| 10. |
- Tolias, Panagiotis, 1984-, et al.
(författare)
-
Experimental validation of the analytical model for tungsten dust - wall mechanical impacts incorporated in the MIGRAINe dust dynamics code
- 2017
-
Ingår i: NUCLEAR MATERIALS AND ENERGY. - : Elsevier BV. - 2352-1791. ; 12, s. 524-529
-
Tidskriftsartikel (refereegranskat)abstract
- Mechanical dust-wall collisions are unavoidable in fusion devices and their accurate modeling is essential for the understanding of dust transport. The MIGRAINe dust dynamics code features analytical models addressing all facets of dust-surface impacts, some aspects of which have not been experimentally validated thus far. Dedicated dust injection experiments have been carried out in Pilot-PSI resulting to the visualization of in-plasma tungsten dust-surface impacts with an unprecedented resolution. They allowed for a calibration of key quantities of the MIGRAINe impact model.
|
|
