| 1. |
- Lindh, E. Mattias, 1986-
(författare)
-
On the operation of light-emitting electrochemical cells
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- We are in the midst of a technological revolution that permeates nearly all human activities; artificial light is one of the most visible contributors in this societal change. If more efficient, green, and versatile light sources can be developed, they might improve the life of millions of people around the world while causing minimal damage to our climate and environment. The unique operational mechanism of the light-emitting electrochemical cell (LEC) makes it an ideal fit for some unconventional and emerging uses of light, in for example medicine and security.By exploiting this operational mechanism, in which mobile ions enable electrochemical doping of a luminescent polymer, we have designed and fabricated new bilayer LEC architectures. The bilayer LEC features patterned light emission that is easily adjustable during fabrication, and that can be configured to suit new applications of light. Given the light-emitting nature of the LEC, it is somewhat surprising that the optical understanding of its operation is rather limited. To fill this knowledge gap, we investigate how the optical properties of the luminescent polymer respond to electrochemical doping. We find that the complex-refractive index spectrum in the active layer of an LEC, as a direct result of the doping, varies in both space and time. The thin-film structure of an LEC implies that computational predictions of its luminous output need to consider internal reflections and interference. Finally, we implement a doping dependent optical thin-film simulation model. It enables us to precisely replicate the experimental luminance and angle-dependent emission spectrum for a range of LECs with different thicknesses. Using the model we can also identify and quantify many of the different optical loss mechanisms in LECs, which has not previously been done. The insights that we have collected on the path towards our present model will be useful for computational determination of device parameters that are otherwise difficult to acquire.The improved understanding of the optical operation of LECs is important for the maturation of the technology, as it facilitates formulation of relevant and accurate research questions. Hopefully, our results will accelerate the development of the field, so that useful products based on this technology can become available in the not too distant future.
|
|
| 2. |
|
|
| 3. |
- Annamalai, Alagappan, et al.
(författare)
-
Influence of Sb5+ as a Double Donor on Hematite (Fe3+) Photoanodes for Surface-Enhanced Photoelectrochemical Water Oxidation
- 2018
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 10:19, s. 16467-16473
-
Tidskriftsartikel (refereegranskat)abstract
- To exploit the full potential of hematite (α-Fe2O3) as an efficient photoanode for water oxidation, the redox processes occurring at the Fe2O3/electrolyte interface need to be studied in greater detail. Ex situ doping is an excellent technique to introduce dopants onto the photoanode surface and to modify the photoanode/electrolyte interface. In this context, we selected antimony (Sb5+) as the ex situ dopant because it is an effective electron donor and reduces recombination effects and concurrently utilize the possibility to tuning the surface charge and wettability. In the presence of Sb5+ states in Sb-doped Fe2O3 photoanodes, as confirmed by X-ray photoelectron spectroscopy, we observed a 10-fold increase in carrier concentration (1.1 × 1020 vs 1.3 × 1019 cm–3) and decreased photoanode/electrolyte charge transfer resistance (∼990 vs ∼3700 Ω). Furthermore, a broad range of surface characterization techniques such as Fourier-transform infrared spectroscopy, ζ-potential, and contact angle measurements reveal that changes in the surface hydroxyl groups following the ex situ doping also have an effect on the water splitting capability. Theoretical calculations suggest that Sb5+ can activate multiple Fe3+ ions simultaneously, in addition to increasing the surface charge and enhancing the electron/hole transport properties. To a greater extent, the Sb5+- surface-doped determines the interfacial properties of electrochemical charge transfer, leading to an efficient water oxidation mechanism.
|
|
| 4. |
- Barzegar, Hamid Reza, 1977-, et al.
(författare)
-
C60/Collapsed Carbon Nanotube Hybrids : A Variant of Peapods
- 2015
-
Ingår i: Nano letters (Print). - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 15:2, s. 829-834
-
Tidskriftsartikel (refereegranskat)abstract
- We examine a variant of so-called carbon nanotube peapods by packing C60 molecules inside the open edge ducts of collapsed carbon nanotubes. C60 insertion is accomplished through a facile single-step solution-based process. Theoretical modeling is used to evaluate favorable low-energy structural configurations. Overfilling of the collapsed tubes allows infiltration of C60 over the full cross-section of the tubes and consequent partial or complete reinflation, yielding few-wall, large diameter cylindrical nanotubes packed with crystalline C60 solid cores.
|
|
| 5. |
- Barzegar, Hamid Reza, et al.
(författare)
-
Electrostatically Driven Nanoballoon Actuator
- 2016
-
Ingår i: Nano letters (Print). - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 16:11, s. 6787-6791
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate an inflatable nanoballoon actuator based on geometrical transitions between the inflated (cylindrical) and collapsed (flattened) forms of a carbon nanotube. In situ transmission electron microscopy experiments employing a nanoelectromechanical manipulator show that a collapsed carbon nanotube can be reinflated by electrically charging the nanotube, thus realizing an electrostatically driven nanoballoon actuator. We find that the tube actuator can be reliably cycled with only modest control voltages (few volts) with no apparent wear or fatigue. A complementary theoretical analysis identifies critical parameters for nanotube nanoballoon actuation.
|
|
| 6. |
- Barzegar, Hamid Reza, et al.
(författare)
-
Self-assembled PCBM nanosheets : a facile route to electronic layer-on-Layer heterostructures
- 2018
-
Ingår i: Nano letters (Print). - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 18:2, s. 1442-1447
-
Tidskriftsartikel (refereegranskat)abstract
- We report on the self-assembly of semicrystalline [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) nanosheets at the interface between a hydrophobic solvent and water, and utilize this opportunity for the realization of electronically active organic/organic molecular heterostructures. The self-assembled PCBM nanosheets can feature a lateral size of >1 cm2 and be transferred from the water surface to both hydrophobic and hydrophilic surfaces using facile transfer techniques. We employ a transferred single PCBM nanosheet as the active material in a field-effect transistor (FET) and verify semiconductor function by a measured electron mobility of 1.2 × 10–2 cm2 V–1 s–1 and an on–off ratio of ∼1 × 104. We further fabricate a planar organic/organic heterostructure with the p-type organic semiconductor poly(3-hexylthiophene-2,5-diyl) as the bottom layer and the n-type PCBM nanosheet as the top layer and demonstrate ambipolar FET operation with an electron mobility of 8.7 × 10–4 cm2 V–1 s–1 and a hole mobility of 3.1 × 10–4 cm2V–1 s–1.
|
|
| 7. |
- Barzegar, Hamid Reza, et al.
(författare)
-
Spontaneous twisting of a collapsed carbon nanotube
- 2017
-
Ingår i: Nano Reseach. - : Tsinghua University Press. - 1998-0124 .- 1998-0000. ; 10:6, s. 1942-1949
-
Tidskriftsartikel (refereegranskat)abstract
- We study the collapsing and subsequent spontaneous twisting of a carbon nanotube by in situ transmission electron microscopy (TEM). A custom-sized nanotube is first created in the microscope by selectively extracting shells from a parent multi-walled tube. The few-walled, large-diameter daughter nanotube is driven to collapse via mechanical stimulation, after which the ribbon-like collapsed tube spontaneously twists along its long axis. In situ diffraction experiments fully characterize the uncollapsed and collapsed tubes. The experimental observations and associated theoretical analysis indicate that the origin of the twisting is compressive strain.
|
|
| 8. |
- Barzegar, HamidReza, 1977-
(författare)
-
Synthesis and Characterization of Carbon Based One-Dimensional Structures : Tuning Physical and Chemical Properties
- 2015
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Carbon nanostructures have been extensively used in different applications; ranging from electronic and optoelectronic devices to energy conversion. The interest stems from the fact that covalently bonded carbon atoms can form a wide variety of structures with zero-, one- and two-dimensional configuration with different physical properties. For instance, while fullerene molecules (zero-dimensional carbon structures) realize semiconductor behavior, two-dimensional graphene shows metallic behavior with exceptional electron mobility. Moreover the possibility to even further tune these fascinating properties by means of doping, chemical modification and combining carbon based sub-classes into new hybrid structures make the carbon nanostructure even more interesting for practical application. This thesis focuses on synthesizing SWCNT and different C60 one-dimensional structures as well as tuning their properties by means of different chemical and structural modification. The purpose of the study is to have better understanding of the synthesis and modification techniques, which opens for better control over the properties of the product for desired applications.In this thesis carbon nanotubes (CNTs) are grown by chemical vapor deposition (CVD) on iron/cobalt catalyst particles. The effect of catalyst particle size on the diameter of the grown CNTs is systematically studied and in the case of SWCNTs it is shown that the chirality distribution of the grown SWCNTs can be tuned by altering the catalyst particle composition. In further experiments, incorporation of the nitrogen atoms in SWCNTs structures is examined. A correlation between experimental characterization techniques and theoretical calculation enable for precise analysis of different types of nitrogen configuration in SWCNTs structure and in particular their effect on growth termination and electronic properties of SWCNTs are studied.C60 one-dimensional structures are grown through a solution based method known as Liquid-liquid interfacial precipitation (LLIP). By controlling the crystal seed formation at the early stage of the growth the morphology and size of the grown C60 one-dimensional structures where tuned from nanorods to large diameter rods and tubes. We further introduce a facile solution-based method to photo-polymerize the as-grown C60 nanorods, and show that such a method crates a polymeric C60 shell around the nanorods. The polymeric C60 shell exhibits high stability against common hydrophobic C60 solvents, which makes the photo-polymerized nanorods ideal for further solution-based processing. This is practically shown by decoration of both as grown and photo-polymerized nanorods by palladium nanoparticles and comparison between their electrochemical activities. The electrical properties of the C60 nanorods are also examined by utilizing a field effect transistor geometry comprising different C60 nanorods.In the last part of the study a variant of CNT is synthesized in which large diameter, few-walled CNTs spontaneously transform to a collapsed ribbon shape structure, the so called collapsed carbon nanotube (CCNT). By inserting C60 molecules into the duct edges of CCNT a new hybrid structure comprising C60 molecules and CCNT is synthesized and characterized. A further C60 insertion lead to reinflation of CCNTs, which eventually form few-walled CNT completely filled with C60 molecules.
|
|
| 9. |
- Blazinic, Vanja
(författare)
-
Probing the effects of photodegradation of acceptor materials in polymer solar cells: bulk, surface, and molecular level
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Polymer solar cells (PSC) have reached record power conversion efficiencies of over 15%. The operational lifetime of PSCs, however, has to increase for their use in large area outdoor applications. In this work, a set of spectroscopic techniques (UV-vis, FTIR, NEXAFS, XPS) was used to study the impact of exposure to light and air (photo-oxidation) on the photoactive layer and its components. We focused on the electron acceptor components: the fullerene derivatives, PC60BM and PC70BM, and the polymer N2200. A comparative study of photo-oxidized PC60BM and PC70BM thin films by UV-vis and FTIR spectroscopy has shown that both materials undergo similar photochemical transformation, with the process being faster in PC60BM, due to the greater curvature of the C60 cage. Comparing experimental FTIR, XPS and NEXAFS spectra of the photo-oxidized PC60BM thin films with the calculated spectra for a large variety of photo-oxidation products, it was found that dicarbonyl and anhydride groups attach to the C60 cage during photo-oxidation. The study of photo-oxidized TQ1:PC70BM blend films by spectroscopic and J-V measurements shows that deterioration of the charge transport in PC70BM is the major contributor to the device performance degradation. Kelvin Probe measurements demonstrated that the charge transport deterioration was due to upward band bending and gap states being formed on the surface of photo-oxidized PC70BM. The TQ1:PC70BM blends films were further studied by AFM-IR in order to determine the lateral distribution of pristine components, as well as the photo-oxidation products. It was found that anhydride oxidation products of PC70BM are equally distributed over the blend film surface. The PC70BM is replaced with the polymer N2200 in the blend with TQ1. The photostability in air of the blend and its neat components was studied by UV-vis and FTIR spectroscopy. The spectra show that thermal annealing improves the photostability in air of both components.
|
|
| 10. |
- Ekeroth, Sebastian, 1988-, et al.
(författare)
-
Catalytic nanotruss structures realized by magnetic self-assembly in pulsed plasma
- 2018
-
Ingår i: Nano Letters. - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 18:5, s. 3132-3137
-
Tidskriftsartikel (refereegranskat)abstract
- Tunable nanostructures that feature a high surface area are firmly attached to a conducting substrate and can be fabricated efficiently over significant areas, which are of interest for a wide variety of applications in, for instance, energy storage and catalysis. We present a novel approach to fabricate Fe nanoparticles using a pulsed-plasma process and their subsequent guidance and self-organization into well-defined nanostructures on a substrate of choice by the use of an external magnetic field. A systematic analysis and study of the growth procedure demonstrate that nondesired nanoparticle agglomeration in the plasma phase is hindered by electrostatic repulsion, that a polydisperse nanoparticle distribution is a consequence of the magnetic collection, and that the formation of highly networked nanotruss structures is a direct result of the polydisperse nanoparticle distribution. The nanoparticles in the nanotruss are strongly connected, and their outer surfaces are covered with a 2 nm layer of iron oxide. A 10 μm thick nanotruss structure was grown on a lightweight, flexible and conducting carbon-paper substrate, which enabled the efficient production of H2 gas from water splitting at a low overpotential of 210 mV and at a current density of 10 mA/cm2.
|
|
