| 1. |
- Costa, Diogo Ribeiro, et al.
(författare)
-
Coated UN microspheres embedded in UO2 matrix as an innovative advanced technology fuel: Early progress
- 2021
-
Ingår i: TopFuel 2021 Light Water Reactor Fuel Performance Conference, Santander, Spain, October 24-28, 2021..
-
Konferensbidrag (refereegranskat)abstract
- Uranium nitride (UN)-uranium dioxide (UO2) composites have been proposed as an innovative advanced technology fuel (ATF) option for light water reactors (LWRs). However, the interdiffusion of oxygen and nitrogen during fabrication result in the formation of α-U2N3. A way to avoid this interaction is to coat the UN with a material that is impermeable to oxygen and nitrogen, has a high melting point, high thermal conductivity, and reasonable low neutron cross-section. Among many candidates,refractory metals may be the first option. In this study, we present an early progressresult of fabricating an innovative ATF concept: coated UN microspheres embedded in UO2 matrix. To do so, the following steps are performed: 1) diffusion couple experiments of UN-X-UO2 (X=W, Mo, Ta, Nb, V) to evaluate the interactions between the coating candidates (X) and the fuels; 2) selection of the most promising candidates; 3) use a surrogate material (ZrN microspheres) to develop processes to coat the microspheres with nanopowders: dry and wet methods; 4) coating the UN microspheres with a selected method; 5) finally, sinter a coated UN-UO2 composite using spark plasma sintering (SPS), and compare the results with an uncoated UNUO2 composite sintered at the same SPS conditions (1500 °C, 80 MPa, 3 min,vacuum). The diffusion couple results indicate W and Mo as the most promising candidates, with the wet method showing the smoothest surface. So, dense (~95 %TD) W/UN-UO2 and Mo/UN-UO2 were sintered and the preliminary results show that the tungsten coating was not efficient due to poor adhesion. Conversely, the Mo coating (~15 µm) was efficient against the α-U2N3 formation. Therefore, this early progress indicates the possibility of fabricating an innovative ATF concept using a low cost and potentially applicable coating method.
|
|
| 2. |
- Costa, Diogo Ribeiro, et al.
(författare)
-
Coated ZrN sphere-UO2 composites as surrogates for UN-UO2 accident tolerant fuels
- 2022
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 567, s. 153845-
-
Tidskriftsartikel (refereegranskat)abstract
- Uranium nitride (UN) spheres embedded in uranium dioxide (UO2) matrix is considered an innovative accident tolerant fuel (ATF). However, the interaction between UN and UO2 restricts the applicability of such composite in light water reactors. A possibility to limit this interaction is to separate the two materials with a diffusion barrier that has a high melting point, high thermal conductivity, and reasonably low neutron cross-section. Recent density functional theory calculations and experimental results on interface interactions in UN-X-UO2 systems (X = V, Nb, Ta, Cr, Mo, W) concluded that Mo and W are promising coating candidates. In this work, we develop and study different methods of coating ZrN spheres, used as a surrogate material for UN spheres: first, using Mo or W nanopowders (wet and binder); and second, using chemical vapour deposition (CVD) of W. ZrN-UO2 composites containing 15 wt% of coated ZrN spheres were consolidated by spark plasma sintering (1773 K, 80 MPa) and characterised by SEM/FIB-EDS and EBSD. The results show dense Mo and W layers without interaction with UO2. Wet and binder Mo methods provided coating layers of about 20 µm and 65 µm, respectively, while the binder and CVD of W methods layers of about 12 µm and 3 µm, respectively.
|
|
| 3. |
- Costa, Diogo Ribeiro
(författare)
-
Encapsulated additive nuclear fuels as an innovative accident tolerant fuel concept : fabrication, characterisation and oxidation resistance
- 2023
-
Ingår i: Journal of Nuclear Materials. - 0022-3115 .- 1873-4820.
-
Tidskriftsartikel (refereegranskat)abstract
- UN-UO2 composites are considered an accident tolerant fuel (ATF) option for light water reactors (LWRs). However, the interactions between UN and UO2 and the low oxidation resistance of UN limit the application of such ATF composite concept in LWRs. A potential alternative to overcome these issues is encapsulating the UN fuel before sintering. Based on our recent studies, molybdenum and tungsten are selected to encapsulate UN spheres. In this article, different coating techniques, such as powder coating, chemical vapour deposition (CVD), and physical vapour deposition (PVD), were developed and applied to encapsulate surrogates and UN spheres. Encapsulated UN-UO2 pellets fabricated by the spark plasma sintering (SPS) method (1773 K, 80 MPa) were characterised by complementary techniques and evaluated against their oxidation resistance in air up to 973 K. The results show inert, dense, and non-uniform Mo and W layers of about 28 μm and 32 μm, respectively, obtained by the powder coating method. PVD provided uniform and dense layers of Mo and W of approximately 1.0 μm and 4.0 μm, respectively, but with cracks at the interface with the surrogate spheres. PVD-Mo onto UN spheres shows a dense and well-adhered layer of about 0.5 μm but with W contamination from the previous coating. The PVD-W and CVD-W results and the oxidation experiments will be in the final version of this manuscript.
|
|
| 4. |
|
|
| 5. |
- Costa, Diogo Ribeiro, et al.
(författare)
-
Oxidation of UN/U 2 N 3 -UO 2 composites: an evaluation of UO 2 as an oxidation barrier for the nitride phases
- 2021
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 544
-
Tidskriftsartikel (refereegranskat)abstract
- Composite fuels such as UN-UO2 are being considered to address the lower oxidation resistance of the UN fuel from a safety perspective for use in light water reactors, whilst improving the in-reactor behaviour of the more ubiquitous UO2 fuel. An innovative UN-UO2 accident tolerant fuel has recently been fabricated and studied: UN microspheres embedded in UO2 matrix. In the present study, detailed oxidative thermogravimetric investigations (TGA/DSC) of high-density UN/U2N3-UO2 composite fuels (91-97 %TD), as well as post oxidised microstructures obtained by SEM, are reported and analysed. Triplicate TGA measurements of each specimen were carried out at 5 K/min up to 973 K in a synthetic air atmosphere to assess their oxidation kinetics. The mass variation due to the oxidation reactions (%), the oxidation onset temperatures (OOTs), and the maximum reaction temperatures (MRTs) are also presented and discussed. The results show that all composites have similar post oxidised microstructures with mostly intergranular cracking and spalling. The oxidation resistance of the pellet with initially 10 wt% of UN microspheres is surprisingly better than the UO2 reference. Moreover, there is no significant difference in the OOT (~557 K) and MRT (~615 K) when 30 wt% or 50 wt% of embedded UN microspheres are used. Therefore, the findings in this article demonstrate that the UO2 matrix acts as a barrier to improve the oxidation resistance of the nitride phases at the beginning of life conditions.
|
|
| 6. |
- Costa, Diogo Ribeiro, et al.
(författare)
-
UN microspheres embedded in UO2 matrix: An innovative accident tolerant fuel
- 2020
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 540
-
Tidskriftsartikel (refereegranskat)abstract
- Uranium nitride (UN)-uranium dioxide (UO2) composite fuels are being considered as an accident tolerant fuel (ATF) option for light water reactors. However, the complexity related to the chemical interactions between UN and UO(2 )during sintering is still an open problem. Moreover, there is a lack of knowledge regarding the influence of the sintering parameters on the amount and morphology of the alpha-U2N3 phase formed. In this study, a detailed investigation of the interaction between UN and UO2 is provided and a formation mechanism for the resulting alpha-U2N3 phase is proposed. Coupled with these analyses, an innovative ATF concept was investigated: UN microspheres and UO2,13 powder were mixed and subsequently sintered by spark plasma sintering. Different temperatures, pressures, times and cooling rates were evaluated. The pellets were characterised by complementary techniques, including XRD, DSC, and SEM-EDS/WDS/EBSD. The UN and UO2 interaction is driven by O diffusion into the UN phase and N diffusion in the opposite direction, forming a long-range solid solution in the UO2 matrix, that can be described as UO2-xNx. The cooling process decreases the N solubility in UO2-xNx, causing then N redistribution and precipitation as alpha-U2N3 phase along and inside the UO2 grains. This precipitation mechanism occurs at temperatures between 1273 K and 973 K on cooling, following specific crystallographic grain orientation patterns. (C) 2020 The Authors. Published by Elsevier B.V.
|
|
| 7. |
- Dehlin, Fredrik, 1994-, et al.
(författare)
-
Activation analysis of the lead coolant in SUNRISE-LFR
- 2023
-
Ingår i: Nuclear Engineering and Design. - : Elsevier BV. - 0029-5493 .- 1872-759X. ; 414
-
Tidskriftsartikel (refereegranskat)abstract
- A lumped, zero-dimensional, mass transport model is combined with a depletion matrix solver to study the influence of coolant circulation on radionuclide build-up in a small lead-cooled fast reactor. It is shown that the addition of coolant circulation results in a lower activity for a minority of studied nuclides, and it is thus recommended to consider stagnant coolant when licensing a reactor. Activation analysis of three different lead qualities potentially used in SUNRISE-LFR is performed, and the result shows that a low silver content is desirable to simplify maintenance and decommissioning.
|
|
| 8. |
- Dehlin, Fredrik, 1994-, et al.
(författare)
-
An analytic approach to the design of passively safe lead-cooled reactors
- 2022
-
Ingår i: Annals of Nuclear Energy. - : Elsevier BV. - 0306-4549 .- 1873-2100. ; 169, s. 108971-108971
-
Tidskriftsartikel (refereegranskat)abstract
- A methodology to assist the design of liquid metal reactors, passively cooled by natural circulation duringoff-normal conditions, is derived from first principle physics. Based on this methodology, a preliminarydesign of a small LFR is accomplished and presented with accompanying neutronic and reactor dynamiccharacterizations. The benefit of using this methodology for reactor design compared to other availablemethods is discussed.
|
|
| 9. |
|
|
| 10. |
- Ekberg, Christian, 1967, et al.
(författare)
-
Fuel fabrication and reprocessing issues: the ASGARD project
- 2020
-
Ingår i: EPJ NUCLEAR SCIENCES & TECHNOLOGIES. - : EDP Sciences. - 2491-9292. ; 6
-
Forskningsöversikt (refereegranskat)abstract
- The ASGARD project (2012-2016) was designed to tackle the challenge the multi-dimensional questions dealing with the recyclability of novel nuclear fuels. These dimensions are: the scientific achievements, investigating how to increase the industrial applicability of the fabrication of these novel fuels, the bridging of the often separate physics and chemical communities in connection with nuclear fuel cycles and finally to create an ambitious education and training platform. This will be offered to younger scientists and will include a broadening of their experience by international exchange with relevant facilities. At the end of the project 27 papers in peer reviewed journals were published and it is expected that the real number will be the double. The training and integration success was evidenced by the fruitful implementation of the Travel Fund as well as the unique schools, e.g. practical and theoretical handling of plutonium.
|
|
