| 1. |
|
|
| 2. |
- Bao, Chunxiong, et al.
(författare)
-
High Performance and Stable All-Inorganic Metal Halide Perovskite-Based Photodetectors for Optical Communication Applications
- 2018
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 30:38
-
Tidskriftsartikel (refereegranskat)abstract
- Photodetectors are critical parts of an optical communication system for achieving efficient photoelectronic conversion of signals, and the response speed directly determines the bandwidth of the whole system. Metal halide perovskites, an emerging class of low-cost solution-processed semiconductors, exhibiting strong optical absorption, low trap states, and high carrier mobility, are widely investigated in photodetection applications. Herein, through optimizing the device engineering and film quality, high-performance photodetectors based on all-inorganic cesium lead halide perovskite (CsPbIxBr3-x), which simultaneously possess high sensitivity and fast response, are demonstrated. The optimized devices processed from CsPbIBr2 perovskite show a practically measured detectable limit of about 21.5 pW cm(-2) and a fast response time of 20 ns, which are both among the highest reported device performance of perovskite-based photodetectors. Moreover, the photodetectors exhibit outstanding long-term environmental stability, with negligible degradation of the photoresponse property after 2000 h under ambient conditions. In addition, the resulting perovskite photodetector is successfully integrated into an optical communication system and its applications as an optical signal receiver on transmitting text and audio signals is demonstrated. The results suggest that all-inorganic metal halide perovskite-based photodetectors have great application potential for optical communication.
|
|
| 3. |
- Xu, Weidong, et al.
(författare)
-
Precisely Controlling the Grain Sizes with an Ammonium Hypophosphite Additive for High-Performance Perovskite Solar Cells
- 2018
-
Ingår i: Advanced Functional Materials. - : WILEY-V C H VERLAG GMBH. - 1616-301X .- 1616-3028. ; 28:33
-
Tidskriftsartikel (refereegranskat)abstract
- A facile approach to precisely control the perovskite grain sizes is proposed and demonstrated for high-performance photovoltaic (PV) solar cells. With the introduction of various amounts of NH4H2PO2 (AHP) additives into the PbI2/CH3NH3I precursors, the grain scale of CH3NH3PbI3 films can be finely turned from hundreds of nanometer to micrometer scale, allowing evaluating the effects of crystalline grain boundary on trap densities, charge recombination, and PV device performance. The X-ray diffraction and X-ray photoelectron spectroscopy measurements indicate that the formation of intermediates plays a key role in assisting the perovskite crystal growth. The optimized devices show much larger open-circuit voltages (V-OC) up to 1.10 +/- 0.02 V and significantly enhance power conversion efficiencies (PCEs) of 16.5 +/- 0.7%, as compared to the control devices with PCE of 9.4 +/- 1.0% and V-OC of 1.00 +/- 0.03 V. Further investigations confirm that the boosted PV performance origins from the decreased defect densities due to enlarged grain sizes. It is also demonstrated that the approach is general and applicable to other perovskite systems, e.g., HC(NH2)(2)PbI3. The results suggest the promising application of AHP in achieving high-performance perovskite PV devices, and shed light on understanding the grain boundary effects on perovskite optoelectronics.
|
|
| 4. |
- Zhou, Ke, et al.
(författare)
-
pi-pi Stacking Distance and Phase Separation Controlled Efficiency in Stable All-Polymer Solar Cells
- 2019
-
Ingår i: Polymers. - : MDPI. - 2073-4360. ; 11:10
-
Tidskriftsartikel (refereegranskat)abstract
- The morphology of the active layer plays a crucial role in determining device performance and stability for organic solar cells. All-polymer solar cells (All-PSCs), showing robust and stable morphologies, have been proven to give better thermal stability than their fullerene counterparts. However, outstanding thermal stability is not always the case for polymer blends, and the limiting factors responsible for the poor thermal stability in some All-PSCs, and how to obtain higher efficiency without losing stability, still remain unclear. By studying the morphology of poly [2,3-bis (3-octyloxyphenyl) quinoxaline-5,8-diyl-alt-thiophene-2,5-diyl](TQ1)/poly[4,8-bis[5-(2-ethylhexyl)-2-thienyl]benzo[1,2-b:4,5-b ]dithiophene-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene-)-2-carboxylate-2-6-diyl]] (PCE10)/PNDI-T10 blend systems, we found that the rearranged molecular packing structure and phase separation were mainly responsible for the poor thermal stability in devices containing PCE10. The TQ1/PNDI-T10 devices exhibited an improved PCE with a decreased pi-pi stacking distance after thermal annealing; PCE10/PNDI-T10 devices showed a better pristine PCE, however, thermal annealing induced the increased pi-pi stacking distance and thus inferior hole conductivity, leading to a decreased PCE. Thus, a maximum PCE could be achieved in a TQ1/PCE10/PNDI-T10 (1/1/1) ternary system after thermal annealing resulting from their favorable molecular interaction and the trade-off of molecular packing structure variations between TQ1 and PCE10. This indicates that a route to efficient and thermal stable All-PSCs can be achieved in a ternary blend by using material with excellent pristine efficiency, combined with another material showing improved efficiency under thermal annealing.
|
|
| 5. |
- Li, Shu, et al.
(författare)
-
Comparative efficacy and safety of urate-lowering therapy for the treatment of hyperuricemia : a systematic review and network meta-analysis
- 2016
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 6
-
Tidskriftsartikel (refereegranskat)abstract
- The prevalence of hyperuricemia and gout has been increasing, but the comparative effectiveness and safety of different treatments remain uncertain. We aimed to compare the effectiveness and safety of different treatments for hyperuricemia using network meta-analysis methodology. We systematically reviewed fifteen randomized controlled trials (involving 7,246 patients through January 2016) that compared the effects of different urate-lowering drugs (allopurinol, benzbromarone, febuxostat, pegloticase and probenecid) on hyperuricemia. Drug efficacy and safety, as outcomes, were measured by whether the target level of serum urate acid was achieved and whether any adverse events occurred, respectively. We derived pooled effect sizes expressed as odds ratios (ORs) and 95% confidence intervals (CIs). The efficacy and safety of the drugs were ranked by cumulative ranking probabilities. Our findings show that febuxostat, benzbromarone, probenecid, pegloticase, and allopurinol were all highly effective at reducing the risk of hyperuricemia compared to placebo. Febuxostat had the best efficacy and safety compared to the other drugs. Furthermore, febuxostat 120 mg QD was more effective at achieving urate-lowering targets (OR: 0.17, 95% CI: 0.12-0.24) and safer (OR: 0.72, 95% CI: 0.56-0.91) than allopurinol.
|
|
| 6. |
- Wang, Heyong, et al.
(författare)
-
Efficient perovskite light-emitting diodes based on a solution-processed tin dioxide electron transport layer
- 2018
-
Ingår i: Journal of Materials Chemistry C. - : ROYAL SOC CHEMISTRY. - 2050-7526 .- 2050-7534. ; 6:26, s. 6996-7002
-
Tidskriftsartikel (refereegranskat)abstract
- To achieve high-performance perovskite light-emitting diodes (PeLEDs), an appropriate functional layer beneath the perovskite emissive layer is significantly important to modulate the morphology of the perovskite film and to facilitate charge injection and transport in the device. Herein, for the first time, we report efficient n-i-p structured PeLEDs using solution-processed SnO2 as an electron transport layer. Three-dimensional perovskites, such as CH(NH2)(2)PbI3 and CH3NH3PbI3, are found to be more chemically compatible with SnO2 than with commonly used ZnO. In addition, SnO2 shows good transparency, excellent morphology and suitable energy levels. These properties make SnO2 a promising candidate in both three-and low-dimensional PeLEDs, among which a high external quantum efficiency of 7.9% has been realized. Furthermore, interfacial materials that are widely used to improve the device performances of ZnO-based PeLEDs are also applied on SnO2-based PeLEDs and their effects have been systematically studied. In contrast to ZnO, SnO2 modified by these interfacial materials shows detrimental effects due to photoluminescence quenching.
|
|
| 7. |
- Wang, Jixiang, et al.
(författare)
-
Molecularly Imprinted Fluorescent Test Strip for Direct, Rapid, and Visual Dopamine Detection in Tiny Amount of Biofluid
- 2019
-
Ingår i: Small. - : John Wiley & Sons. - 1613-6810 .- 1613-6829. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- Paper-based assays for detection of physiologically important species are needed in medical theranostics owning to their superiorities in point of care testing, daily monitoring, and even visual readout by using chromogenic materials. In this work, a facile test strip is developed for visual detection of a neurotransmitter dopamine (DA) based on dual-emission fluorescent molecularly imprinted polymer nanoparticles (DE-MIPs). The DE-MIPs, featured with tailor-made DA affinity and good anti-interference, exhibit DA concentration-dependent fluorescent colors, due to the variable ratios of dual-emission fluorescence caused by DA binding and quenching. By facile coating DE-MIPs on a filter paper, the DA test strips are obtained. The resultant test strip, like the simplicity of a pH test paper, shows the potential for directly visual detection of DA levels just by dripping a tiny amount of biofluid sample on it. The test result of real serum samples demonstrates that the DA strip enables to visually and semiquantitatively detect DA within 3 min by using only 10 microL of serum samples and with a low detection limit ((100-150) x 10(-9) m) by naked eye. This work thus offers a facile and efficient strategy for rapid, visual, and on-site detection of biofluids in clinic.
|
|
| 8. |
- Xu, Weidong, et al.
(författare)
-
Iodomethane-Mediated Organometal Halide Perovskite with Record Photoluminescence Lifetime
- 2016
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 8:35, s. 23181-23189
-
Tidskriftsartikel (refereegranskat)abstract
- Organometallic lead halide perovskites are excellent light harvesters for high-efficiency photovoltaic devices. However, as the key component in these devices, a perovskite thin film with good morphology and minimal trap states is still difficult to obtain. Herein we show that by incorporating a low boiling point alkyl halide such as iodomethane (CH3I) into the precursor solution, a perovskite (CH3NH3PbI3-xClx) film with improved grain size and orientation can be easily achieved. More importantly, these films exhibit a significantly reduced amount of trap states. Record photoluminescence lifetimes of more than 4 mu s are achieved; these lifetimes are significantly longer than that of pristine CH3NH3PbI3-xClx films. Planar heterojunction solar cells incorporating these CH3I-mediated perovskites have demonstrated a dramatically increased power conversion efficiency compared to the ones using pristine CH3NH3PbI3-xClx. Photoluminescence, transient absorption, and microwave detected photoconductivity measurements all provide consistent evidence that CH3I addition increases the number of excitons generated and their diffusion length, both of which assist efficient carrier transport in the photovoltaic device. The simple incorporation of alkyl halide to enhance perovskite surface passivation introduces an important direction for future progress on high efficiency perovskite optoelectronic devices.
|
|
| 9. |
- Xu, Weidong, 1988-, et al.
(författare)
-
Rational molecular passivation for high-performance perovskite light-emitting diodes
- 2019
-
Ingår i: Nature Photonics. - : Springer Nature Publishing AG. - 1749-4885 .- 1749-4893. ; 13:6, s. 418-424
-
Tidskriftsartikel (refereegranskat)abstract
- A major efficiency limit for solution-processed perovskite optoelectronic devices, for example light-emitting diodes, is trap-mediated non-radiative losses. Defect passivation using organic molecules has been identified as an attractive approach to tackle this issue. However, implementation of this approach has been hindered by a lack of deep understanding of how the molecular structures influence the effectiveness of passivation. We show that the so far largely ignored hydrogen bonds play a critical role in affecting the passivation. By weakening the hydrogen bonding between the passivating functional moieties and the organic cation featuring in the perovskite, we significantly enhance the interaction with defect sites and minimize non-radiative recombination losses. Consequently, we achieve exceptionally high-performance near-infrared perovskite light-emitting diodes with a record external quantum efficiency of 21.6%. In addition, our passivated perovskite light-emitting diodes maintain a high external quantum efficiency of 20.1% and a wall-plug efficiency of 11.0% at a high current density of 200 mA cm−2, making them more attractive than the most efficient organic and quantum-dot light-emitting diodes at high excitations.
|
|
| 10. |
- Xu, Weidong, 1988-, et al.
(författare)
-
The progress and prospects of non-fullerene acceptors in ternary blend organic solar cells
- 2018
-
Ingår i: Materials Horizons. - : ROYAL SOC CHEMISTRY. - 2051-6347 .- 2051-6355. ; 5:2, s. 206-221
-
Forskningsöversikt (refereegranskat)abstract
- The rapid development of organic solar cells (OSCs) based on non-fullerene acceptors has attracted increasing attention during the past few years, with a record power conversion efficiency of over 13% in a binary bulk heterojunction architecture. This exciting development also enables new possibilities for ternary OSCs to further enhance their efficiency and stability. This review summarizes very recent developments of ternary OSCs, with a focus on blends involving non-fullerene acceptors. We also highlight the challenges and perspectives for further development of ternary blend organic solar cells.
|
|
