| 1. |
|
|
| 2. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 3. |
- Maimaiti, Nazhakaiti, et al.
(författare)
-
Cervical musculoskeletal disorders and their relationships with personal and work-related factors among electronic assembly workers
- 2019
-
Ingår i: Journal of Safety Research. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0022-4375 .- 1879-1247. ; 71, s. 79-85
-
Tidskriftsartikel (refereegranskat)abstract
- Introduction: Electronics assembly workers are reported to have a high prevalence of musculoskeletal disorders (MSDs). This study investigated the prevalence of cervical MSDs and the complex relationships between cervical MSDs and individual, physical, psychosocial factors among electronics assembly workers. Methods: In this cross-sectional survey, self-administered questionnaires from 700 workers in electronics manufacturing workshops were analysed. Information concerning musculoskeletal symptoms, personal and work-related factors was collected. Finally, the prevalence of cervical MSDs was computed for different subgroups, and the relationships with different factors were analyzed using logistic regression and structural equation modeling (SEM). Results: The total 12 month prevalence of cervical MSDs among the survey population was 29.4%. Variables of gender, job tenure, twisting head frequently, neck flexion/extension for long time and work required to be done quickly showed significant associations with MSDs in a multivariate logistic regression (P < 0.05). The SEM analysis showed moderate and significant correlations between postural load (gamma = 0.279), gender (gamma = 0.233) and cervical MSDs, while there were weak but significant correlations between vibration (gamma = 0.024), work stress (gamma = 0.126), job tenure (gamma = 0.024) and cervical MSDs. Both work stress and vibration affected the MSDs indirectly through postural load. Conclusions: The logistic regression results support previous general epidemiological MSD studies, and indicates that individual, physical, and psychosocial factors are related to cervical MSDs. The SEM provides a better approximation of the complexity of the relationship between risk factors and cervical MSDs. Improving awkward postures may be effective ways to control the influence of occupational stressors or vibration on MSDs. Practical Applications: The study is to improve prevention of MSDs among electronics assembly workers and promote their occupational health.
|
|
| 4. |
- Cho, Hae Sung, et al.
(författare)
-
Isotherms of individual pores by gas adsorption crystallography
- 2019
-
Ingår i: Nature Chemistry. - : Springer Science and Business Media LLC. - 1755-4330 .- 1755-4349. ; 11:6, s. 562-570
-
Tidskriftsartikel (refereegranskat)abstract
- Accurate measurements and assessments of gas adsorption isotherms are important to characterize porous materials and develop their applications. Although these isotherms provide knowledge of the overall gas uptake within a material, they do not directly give critical information concerning the adsorption behaviour of adsorbates in each individual pore, especially in porous materials in which multiple types of pore are present. Here we show how gas adsorption isotherms can be accurately decomposed into multiple sub-isotherms that correspond to each type of pore within a material. Specifically, two metal-organic frameworks, PCN-224 and ZIF-412, which contain two and three different types of pore, respectively, were used to generate isotherms of individual pores by combining gas adsorption measurements with in situ X-ray diffraction. This isotherm decomposition approach gives access to information about the gas uptake capacity, surface area and accessible pore volume of each individual pore, as well as the impact of pore geometry on the uptake and distribution of different adsorbates within the pores.
|
|
| 5. |
- Han, Ruiping, et al.
(författare)
-
Review on Heat-Utilization Processes and Heat-Exchange Equipment in Biogas Engineering
- 2016
-
Ingår i: Journal of Renewable and Sustainable Energy. - : AIP Publishing. - 1941-7012. ; 8:3
-
Tidskriftsartikel (refereegranskat)abstract
- With the increasing demand for environmental protection and renewable energy, bioenergy technology has been attracting considerable attention. Anaerobic digestion (AD) is the process to convert the low-grade biomass into bioenergy, in which both heat-recovery and -recycling should be treated carefully in order to improve the process efficiency. In this work, the heat-recovery and its utilization processes were reviewed, and different types of heat exchangers as well as their advantages in biogas engineering were surveyed. It shows that the recovery and utilization of the waste heat from biogas plants with an internal system, such as slurry effluent unit, the combined heat and power unit, the sanitation unit, and the internal recycle unit, are important for improving the AD efficiency of biogas production. For example, the recovery and recycling of waste heat from the effluent can result in a 2-3 °C temperature increase for the inlet manure slurry. For thermophilic AD, the heat recovery from effluent can save about 50% of the total heat requirement. The external heating process is more suitable for large- and medium-scale biogas plants, and the heat transfer coefficient of external heating (850-1000 W/m2 K-1) is almost two-times higher than that of the internal heating (300-400 W/m2 K-1). To utilize the waste heat in biogas plants, heat exchangers have been designed for biogas slurry. However, further improvement on the heat exchangers with anti-blockage, anti-fouling, high efficiency, and low investment is still needed. Moreover, the heat exchanger suitable for a low-temperature-difference system is specially needed in China, but the development is still in its infancy. Therefore, to tailor to the Chinese national conditions, special external heating processes should be designed and reoriented to the diversity of biomass, the climatic environmental conditions, and the renewable Chinese policies
|
|
| 6. |
- He, Minhui, et al.
(författare)
-
Recent advances in dendroclimatology in China
- 2019
-
Ingår i: Earth-Science Reviews. - : Elsevier BV. - 0012-8252 .- 1872-6828. ; 194, s. 521-535
-
Forskningsöversikt (refereegranskat)abstract
- Considerable progress has been made in dendroclimatological research in China during the period 2000-2017, including a significant increase in the spatial coverage of tree-ring chronologies developed for paleoclimatic research. New tree-ring sampling sites have been established across the Tibetan Plateau, as well as the north-eastern and sub-tropical eastern parts of China. Most of the studies use coniferous trees, although different plant functional types (e.g., broadleaf species and shrubs) have also been increasingly investigated. Tree-ring chronologies longer than 600 years, however, are mostly found on the Tibetan Plateau, with the longest one extending back to 2637 BCE (before Common Era). Most tree-ring records in the eastern parts of China are < 400 years long. Tree-ring width is the most commonly studied parameter, although stable isotope ratios and wood density data have also been obtained for specific sites. Stable oxygen isotope data frequently shares a common hydroclimate signal, whereas the climate or environmental signals remain inconsistent for the few available stable carbon isotope records. In general, tree-ring width-based temperature reconstructions originate from higher elevation sites (i.e., treeline) compared to hydroclimate reconstructions. Precipitation or drought reconstructions are mainly obtained from regions with an annual precipitation of < 800 mm. Most of the tree-ring reconstructions are based on individual site or local-scale chronologies, although a limited number of regional-scale and field reconstructions have been produced. The most prominent identified characteristics of the recent advances in dendroclimatological research for China have manifested in aspects such as an expanded network of sampling sites, improved climate reconstruction methodology, and improved uncertainty estimations in the latter. Furthermore, the traditional statistical-based tree growth climate relationships have been supplemented by monitoring and modeling approaches. Based on the progress from 2000 to 2017, and on the research potential of the country in this field, we expect additional widening of the dendroclimatological investigations in China during the coming years.
|
|
| 7. |
- Hu, Wensheng, et al.
(författare)
-
Maintainability design based on complex network
- 2017
-
Ingår i: 2017 14th International Computer Conference on Wavelet Active Media Technology and Information Processing (ICCWAMTIP). - 9781538610107 ; , s. 309-314
-
Konferensbidrag (refereegranskat)abstract
- Many faults come from the design phase. In order to improve the maintainability of the software, the design of software architecture must be adopted modular design. This paper presents a method of UML class diagram translated into a directed complex network with weight value. The relation weight coefficient matrix between classes can be calculated by Dijkstra algorithm. The clustering algorithm is implemented on the relation weight coefficient matrix. The result of clustering analysis is that the closely related classes can be clustered into a component. Finally, modular design of the software system can be realized. © 2017 IEEE.
|
|
| 8. |
|
|
| 9. |
- Kristan, Matej, et al.
(författare)
-
The Visual Object Tracking VOT2016 Challenge Results
- 2016
-
Ingår i: COMPUTER VISION - ECCV 2016 WORKSHOPS, PT II. - Cham : SPRINGER INT PUBLISHING AG. - 9783319488813 - 9783319488806 ; , s. 777-823
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2016 aims at comparing short-term single-object visual trackers that do not apply pre-learned models of object appearance. Results of 70 trackers are presented, with a large number of trackers being published at major computer vision conferences and journals in the recent years. The number of tested state-of-the-art trackers makes the VOT 2016 the largest and most challenging benchmark on short-term tracking to date. For each participating tracker, a short description is provided in the Appendix. The VOT2016 goes beyond its predecessors by (i) introducing a new semi-automatic ground truth bounding box annotation methodology and (ii) extending the evaluation system with the no-reset experiment.
|
|
| 10. |
- Malovanyy, Andriy, et al.
(författare)
-
Combination of upflow anaerobic sludge blanket (UASB) reactor and partial nitritation/anammox moving bed biofilm reactor (MBBR) for municipal wastewater treatment
- 2015
-
Ingår i: Bioresource Technology. - : Elsevier BV. - 0960-8524 .- 1873-2976. ; 180, s. 144-153
-
Tidskriftsartikel (refereegranskat)abstract
- In this study the combination of an upflow anaerobic sludge blanket (UASB) reactor and a deammonification moving bed biofilm reactor (MBBR) for mainstream wastewater treatment was tested. The competition between aerobic ammonium oxidizing bacteria (AOB) and nitrite oxidizing bacteria (NOB) was studied during a 5 months period of transition from reject water to mainstream wastewater followed by a 16 months period of mainstream wastewater treatment. The decrease of influent ammonium concentration led to a wash-out of suspended biomass which had a major contribution to nitrite production. Influence of a dissolved oxygen concentration and a transient anoxia mechanism of NOB suppression were studied. It was shown that anoxic phase duration has no effect on NOB metabolism recovery and oxygen diffusion rather than affinities of AOB and NOB to oxygen determine the rate of nitrogen conversion in a biofilm system. Anammox activity remained on the level comparable to reject water treatment systems.
|
|
