| 1. |
- Marto, João Pedro, et al.
(författare)
-
Safety and Outcome of Revascularization Treatment in Patients With Acute Ischemic Stroke and COVID-19: The Global COVID-19 Stroke Registry.
- 2023
-
Ingår i: Neurology. - 1526-632X. ; 100:7
-
Tidskriftsartikel (refereegranskat)abstract
- COVID-19-related inflammation, endothelial dysfunction, and coagulopathy may increase the bleeding risk and lower the efficacy of revascularization treatments in patients with acute ischemic stroke (AIS). We aimed to evaluate the safety and outcomes of revascularization treatments in patients with AIS and COVID-19.This was a retrospective multicenter cohort study of consecutive patients with AIS receiving intravenous thrombolysis (IVT) and/or endovascular treatment (EVT) between March 2020 and June 2021 tested for severe acute respiratory syndrome coronavirus 2 infection. With a doubly robust model combining propensity score weighting and multivariate regression, we studied the association of COVID-19 with intracranial bleeding complications and clinical outcomes. Subgroup analyses were performed according to treatment groups (IVT-only and EVT).Of a total of 15,128 included patients from 105 centers, 853 (5.6%) were diagnosed with COVID-19; of those, 5,848 (38.7%) patients received IVT-only and 9,280 (61.3%) EVT (with or without IVT). Patients with COVID-19 had a higher rate of symptomatic intracerebral hemorrhage (SICH) (adjusted OR 1.53; 95% CI 1.16-2.01), symptomatic subarachnoid hemorrhage (SSAH) (OR 1.80; 95% CI 1.20-2.69), SICH and/or SSAH combined (OR 1.56; 95% CI 1.23-1.99), 24-hour mortality (OR 2.47; 95% CI 1.58-3.86), and 3-month mortality (OR 1.88; 95% CI 1.52-2.33). Patients with COVID-19 also had an unfavorable shift in the distribution of the modified Rankin score at 3 months (OR 1.42; 95% CI 1.26-1.60).Patients with AIS and COVID-19 showed higher rates of intracranial bleeding complications and worse clinical outcomes after revascularization treatments than contemporaneous non-COVID-19 patients receiving treatment. Current available data do not allow direct conclusions to be drawn on the effectiveness of revascularization treatments in patients with COVID-19 or to establish different treatment recommendations in this subgroup of patients with ischemic stroke. Our findings can be taken into consideration for treatment decisions, patient monitoring, and establishing prognosis.The study was registered under ClinicalTrials.gov identifier NCT04895462.
|
|
| 2. |
- Jansen, Willemijn J, et al.
(författare)
-
Prevalence Estimates of Amyloid Abnormality Across the Alzheimer Disease Clinical Spectrum.
- 2022
-
Ingår i: JAMA neurology. - : American Medical Association (AMA). - 2168-6157 .- 2168-6149. ; 79:3, s. 228-243
-
Tidskriftsartikel (refereegranskat)abstract
- One characteristic histopathological event in Alzheimer disease (AD) is cerebral amyloid aggregation, which can be detected by biomarkers in cerebrospinal fluid (CSF) and on positron emission tomography (PET) scans. Prevalence estimates of amyloid pathology are important for health care planning and clinical trial design.To estimate the prevalence of amyloid abnormality in persons with normal cognition, subjective cognitive decline, mild cognitive impairment, or clinical AD dementia and to examine the potential implications of cutoff methods, biomarker modality (CSF or PET), age, sex, APOE genotype, educational level, geographical region, and dementia severity for these estimates.This cross-sectional, individual-participant pooled study included participants from 85 Amyloid Biomarker Study cohorts. Data collection was performed from January 1, 2013, to December 31, 2020. Participants had normal cognition, subjective cognitive decline, mild cognitive impairment, or clinical AD dementia. Normal cognition and subjective cognitive decline were defined by normal scores on cognitive tests, with the presence of cognitive complaints defining subjective cognitive decline. Mild cognitive impairment and clinical AD dementia were diagnosed according to published criteria.Alzheimer disease biomarkers detected on PET or in CSF.Amyloid measurements were dichotomized as normal or abnormal using cohort-provided cutoffs for CSF or PET or by visual reading for PET. Adjusted data-driven cutoffs for abnormal amyloid were calculated using gaussian mixture modeling. Prevalence of amyloid abnormality was estimated according to age, sex, cognitive status, biomarker modality, APOE carrier status, educational level, geographical location, and dementia severity using generalized estimating equations.Among the 19097 participants (mean [SD] age, 69.1 [9.8] years; 10148 women [53.1%]) included, 10139 (53.1%) underwent an amyloid PET scan and 8958 (46.9%) had an amyloid CSF measurement. Using cohort-provided cutoffs, amyloid abnormality prevalences were similar to 2015 estimates for individuals without dementia and were similar across PET- and CSF-based estimates (24%; 95% CI, 21%-28%) in participants with normal cognition, 27% (95% CI, 21%-33%) in participants with subjective cognitive decline, and 51% (95% CI, 46%-56%) in participants with mild cognitive impairment, whereas for clinical AD dementia the estimates were higher for PET than CSF (87% vs 79%; mean difference, 8%; 95% CI, 0%-16%; P=.04). Gaussian mixture modeling-based cutoffs for amyloid measures on PET scans were similar to cohort-provided cutoffs and were not adjusted. Adjusted CSF cutoffs resulted in a 10% higher amyloid abnormality prevalence than PET-based estimates in persons with normal cognition (mean difference, 9%; 95% CI, 3%-15%; P=.004), subjective cognitive decline (9%; 95% CI, 3%-15%; P=.005), and mild cognitive impairment (10%; 95% CI, 3%-17%; P=.004), whereas the estimates were comparable in persons with clinical AD dementia (mean difference, 4%; 95% CI, -2% to 9%; P=.18).This study found that CSF-based estimates using adjusted data-driven cutoffs were up to 10% higher than PET-based estimates in people without dementia, whereas the results were similar among people with dementia. This finding suggests that preclinical and prodromal AD may be more prevalent than previously estimated, which has important implications for clinical trial recruitment strategies and health care planning policies.
|
|
| 3. |
- de Simone, Giovanni, et al.
(författare)
-
Hypertension in children and adolescents. : A consensus document from ESC Council on Hypertension, European Association of Preventive Cardiology, European Association of Cardiovascular Imaging, Association of Cardiovascular Nursing & Allied Professions, ESC Council for Cardiology Practice and Association for European Paediatric and Congenital Cardiology
- 2022
-
Ingår i: European heart journal. - : Oxford University Press (OUP). - 1522-9645 .- 0195-668X. ; 43:35, s. 3290-3301
-
Tidskriftsartikel (refereegranskat)abstract
- Definition and management of arterial hypertension in children and adolescents are uncertain, due to different positions of current guidelines. The European Society of Cardiology task-force, constituted by Associations and Councils with interest in arterial hypertension, has reviewed current literature and evidence, to produce a Consensus Document focused on aspects of hypertension in the age range of 6-16 years, including definition, methods of measurement of blood pressure, clinical evaluation, assessment of hypertension-mediated target organ damage, evaluation of possible vascular, renal and hormonal causes, assessment and management of concomitant risk factors with specific attention for obesity, and anti-hypertensive strategies, especially focused on life-style modifications. The Consensus Panel also suggests aspects that should be studied with high priority, including generation of multi-ethnic sex, age and height specific European normative tables, implementation of randomized clinical trials on different diagnostic and therapeutic aspects, and long-term cohort studies to link with adult cardiovascular risk. Finally, suggestions for the successful implementation of the contents of the present Consensus document are also given.
|
|
| 4. |
- Gargani, Luna, et al.
(författare)
-
Detecting the vulnerable carotid plaque : The Carotid Artery Multimodality imaging Prognostic study design
- 2022
-
Ingår i: Journal of Cardiovascular Medicine. - 1558-2027. ; 23:7, s. 466-473
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundCarotid artery disease is highly prevalent and a main cause of ischemic stroke and vascular dementia. There is a paucity of information on predictors of serious vascular events. Besides percentage diameter stenosis, international guidelines also recommend the evaluation of qualitative characteristics of carotid artery disease as a guide to treatment, but with no agreement on which qualitative features to assess. This inadequate knowledge leads to a poor ability to identify patients at risk, dispersion of medical resources, and unproven use of expensive and resource-consuming techniques, such as magnetic resonance imaging, positron emission tomography, and computed tomography.ObjectivesThe Carotid Artery Multimodality imaging Prognostic (CAMP) study will: prospectively determine the best predictors of silent and overt ischemic stroke and vascular dementia in patients with asymptomatic subcritical carotid artery disease by identifying the noninvasive diagnostic features of the 'vulnerable carotid plaque'; assess whether 'smart' use of low-cost diagnostic methods such as ultrasound-based evaluations may yield at least the same level of prospective information as more expensive techniques.Study designWe will compare the prognostic/predictive value of all proposed techniques with regard to silent or clinically manifest ischemic stroke and vascular dementia. The study will include ≥300 patients with asymptomatic, unilateral, intermediate degree (40-60% diameter) common or internal carotid artery stenosis detected at carotid ultrasound, with a 2-year follow-up. The study design has been registered on Clinicaltrial.gov on December 17, 2020 (ID number NCT04679727).
|
|
| 5. |
- Artini, Cristina, et al.
(författare)
-
Roadmap on thermoelectricity
- 2023
-
Ingår i: Nanotechnology. - : IOP Publishing Ltd. - 0957-4484 .- 1361-6528. ; 34:29
-
Tidskriftsartikel (refereegranskat)abstract
- The increasing energy demand and the ever more pressing need for clean technologies of energy conversion pose one of the most urgent and complicated issues of our age. Thermoelectricity, namely the direct conversion of waste heat into electricity, is a promising technique based on a long-standing physical phenomenon, which still has not fully developed its potential, mainly due to the low efficiency of the process. In order to improve the thermoelectric performance, a huge effort is being made by physicists, materials scientists and engineers, with the primary aims of better understanding the fundamental issues ruling the improvement of the thermoelectric figure of merit, and finally building the most efficient thermoelectric devices. In this Roadmap an overview is given about the most recent experimental and computational results obtained within the Italian research community on the optimization of composition and morphology of some thermoelectric materials, as well as on the design of thermoelectric and hybrid thermoelectric/photovoltaic devices.
|
|
| 6. |
- Backes, Claudia, et al.
(författare)
-
Production and processing of graphene and related materials
- 2020
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
| 7. |
- Dainotti, Maria Giovanna, et al.
(författare)
-
On the Evolution of the Hubble Constant with the SNe Ia Pantheon Sample and Baryon Acoustic Oscillations : A Feasibility Study for GRB-Cosmology in 2030
- 2022
-
Ingår i: Galaxies. - : MDPI AG. - 2075-4434. ; 10:1
-
Tidskriftsartikel (refereegranskat)abstract
- The difference from 4 to 6 σ in the Hubble constant (H0 ) between the values observed with the local (Cepheids and Supernovae Ia, SNe Ia) and the high-z probes (Cosmic Microwave Background obtained by the Planck data) still challenges the astrophysics and cosmology community. Previous analysis has shown that there is an evolution in the Hubble constant that scales as f (z) = H0/(1 + z)η, where H0 is H0 (z = 0) and η is the evolutionary parameter. Here, we investigate if this evolution still holds by using the SNe Ia gathered in the Pantheon sample and the Baryon Acoustic Oscillations. We assume H0 = 70 km s−1 Mpc−1 as the local value and divide the Pantheon into three bins ordered in increasing values of redshift. Similar to our previous analysis but varying two cosmological parameters contemporaneously (H0, Ω0m in the ΛCDM model and H0, wa in the w0waCDM model), for each bin we implement a Markov-Chain Monte Carlo analysis (MCMC) obtaining the value of H0 assuming Gaussian priors to restrict the parameters spaces to values we expect from our prior knowledge of the current cosmological models and to avoid phantom Dark Energy models with w < −1. Subsequently, the values of H0 are fitted with the model f (z). Our results show that a decreasing trend with η ∼ 10−2 is still visible in this sample. The η coefficient reaches zero in 2.0 σ for the ΛCDM model up to 5.8 σ for w0waCDM model. This trend, if not due to statistical fluctuations, could be explained through a hidden astrophysical bias, such as the effect of stretch evolution, or it requires new theoretical models, a possible proposition is the modified gravity theories, f (R). This analysis is meant to further cast light on the evolution of H0 and it does not specifically focus on constraining the other parameters. This work is also a preparatory to understand how the combined probes still show an evolution of the H0 by redshift and what is the current status of simulations on GRB cosmology to obtain the uncertainties on the Ω0m comparable with the ones achieved through SNe Ia.
|
|
| 8. |
- Dainotti, Maria Giovanna, et al.
(författare)
-
Shedding new light on the Hubble constant tension through Supernovae Ia
- 2024
-
Ingår i: Proceedings of Science. ; 447
-
Konferensbidrag (refereegranskat)abstract
- The standard cosmological model, the ΓCDM model, is the most suitable description for our universe. This framework can explain the accelerated expansion phase of the universe but still is not immune to open problems when it comes to the comparison with observations. One of the most critical issues is the so-called Hubble constant (H0) tension, namely, the difference of about 5σ as an average between the value of H0estimated locally and the cosmological value measured from the Last Scattering Surface. The value of this tension changes from 4 to 6 σ according to the data used. The current analysis explores the H0tension in the Pantheon sample (PS) of SNe Ia. Through the division of the PS in 3 and 4 bins, the value of H0is estimated for each bin and all the values are fitted with a decreasing function of the redshift (z). Remarkably, H0undergoes a slow decreasing evolution with z, having an evolutionary coefficient compatible with zero up to 5.8σ. If this trend is not caused by hidden astrophysical biases or z-selection effects, then the f (R) modified theories of gravity represent a valid model for explaining such a trend.
|
|
| 9. |
- Kumar Maroju, Praveen, et al.
(författare)
-
Attosecond pulse shaping using a seeded free-electron laser
- 2020
-
Ingår i: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 578, s. 386-391
-
Tidskriftsartikel (refereegranskat)abstract
- Attosecond pulses are central to the investigation of valence- and core-electron dynamics on their natural timescales. The reproducible generation and characterization of attosecond waveforms has been demonstrated so far only through the process of high-order harmonic generation. Several methods for shaping attosecond waveforms have been proposed, including the use of metallic filters, multilayer mirrors and manipulation of the driving field. However, none of these approaches allows the flexible manipulation of the temporal characteristics of the attosecond waveforms, and they suffer from the low conversion efficiency of the high-order harmonic generation process. Free-electron lasers, by contrast, deliver femtosecond, extreme-ultraviolet and X-ray pulses with energies ranging from tens of microjoules to a few millijoules. Recent experiments have shown that they can generate subfemtosecond spikes, but with temporal characteristics that change shot-to-shot. Here we report reproducible generation of high-energy (microjoule level) attosecond waveforms using a seeded free-electron laser. We demonstrate amplitude and phase manipulation of the harmonic components of an attosecond pulse train in combination with an approach for its temporal reconstruction. The results presented here open the way to performing attosecond time-resolved experiments with free-electron lasers.
|
|
| 10. |
- Mancusi, Costantino, et al.
(författare)
-
Management of patients with combined arterial hypertension and aortic valve stenosis : a consensus document from the Council on Hypertension and Council on Valvular Heart Disease of the European Society of Cardiology, the European Association of Cardiovascular Imaging (EACVI), the European Association of Percutaneous Cardiovascular Interventions (EAPCI)
- 2021
-
Ingår i: European Heart Journal - Cardiovascular Pharmacotherapy. - : Oxford University Press. - 2055-6837 .- 2055-6845. ; 7:3, s. 242-250
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- Aortic valve stenosis (AS) is the third most common cardiovascular disease. The prevalence of both AS and arterial hypertension increases with age, and the conditions therefore often co-exist. Co-existence of AS and arterial hypertension is associated with higher global left ventricular (LV) pressure overload, more abnormal LV geometry and function, and more adverse cardiovascular outcome. Arterial hypertension may also influence grading of AS, leading to underestimation of the true AS severity. Current guidelines suggest re-assessing patients once arterial hypertension is controlled. Management of arterial hypertension in AS has historically been associated with prudence and concerns, mainly related to potential adverse consequences of drug-induced peripheral vasodilatation combined with reduced stroke volume due to the fixed LV outflow obstruction. Current evidence suggests that patients should be treated with antihypertensive drugs blocking the renin-angiotensin aldosterone system, adding further drug classes when required, to achieve similar target blood pressure values as in hypertensive patients without AS. The introduction of trans-catheter aortic valve implantation has revolutionized the management of patients with AS, but requires proper blood pressure management during and following valve replacement. The purpose of this document is to review the recent evidence and provide practical expert advice on management of hypertension in patients with AS.
|
|
