| 1. |
- Axelsson, Patrik, et al.
(författare)
-
Bleachability of Alkaline Birch Pulps.
- 2000
-
Ingår i: Proceedings 6<sup>th</sup> European Workshop on Lignocellulosics and Pulp..
-
Konferensbidrag (refereegranskat)
|
|
| 2. |
|
|
| 3. |
- Backman, Anna, et al.
(författare)
-
Transport properties of uniaxially oriented aliphatic polyketone
- 2004
-
Ingår i: Journal of Polymer Science Part B. - : Wiley. - 0887-6266 .- 1099-0488. ; 42:6, s. 947-955
-
Tidskriftsartikel (refereegranskat)abstract
- The oxygen, carbon dioxide, and water-transport properties of a uniaxially oriented aliphatic polyketone were determined. The polyketone was drawn to 5-10 times its original length. The transport properties were related to changes in crystallinity estimated by differential scanning calorimetry and density measurements and by changes in the molecular and crystal orientation assessed by, respectively, infrared and X-ray spectroscopy. The film structures were characterized by confocal scanning laser microscopy and scanning electron microscopy. Stress-strain tests on the drawn specimens enabled the impacts of orientation on the transport and mechanical properties to be compared. A draw-induced increase in crystallinity and molecular orientation yielded permeabilities at a draw ratio of 10 that were 30-40% of the original value, and the percentage decrease was basically independent of the type of gas/vapor molecule. Also, the diffusivities of oxygen and carbon dioxide decreased by an order of magnitude. The fact that the amorphous permeability was peaking at a draw ratio of about 5 was a consequence of a peak in amorphous solubility, which was very high for oxygen and absent for water. It was suggested that the peak in solubility was mainly caused by the destruction of the polymer hydrogen-bond network during drawing and crystal reorientation. The impact of structural reorganization within the polymer and presence of surface valleys seemed to have less impact on the mechanical properties than on the transport properties. This suggested that transport data are more sensitive than mechanical data in probing material defects and changes in molecular packing and morphology.
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
- Carlmark, Anna, et al.
(författare)
-
ATRP of dendronized aliphatic macromonomers of generation one, two, and three
- 2004
-
Ingår i: Macromolecules. - : American Chemical Society (ACS). - 0024-9297 .- 1520-5835. ; 37:20, s. 7491-7496
-
Tidskriftsartikel (refereegranskat)abstract
- Atom transfer radical polymerization (ATRP) of dendritic, aliphatic macromonomers has been investigated. The macromonomers were based on acrylate functionalized 2,2-bis(methylol)propionic acid (bis-MPA) dendrons, with a flexible spacer of 10 carbons incorporated in the structure in between the polymerizable group and the dendritic wedge. Dendronized polymers of generation one, two, and three were successfully synthesized by ATRP. The polymerizations proceeded until over 80% conversion was reached, while maintaining control over polydispersity index (PDI). Plots of ln([M](0)/[M]) vs time for the polymerization of all three macromonomers showed a linear dependence, indicating that the number of propagating radicals in the reaction solution was constant throughout the reaction, when ethyl 2-bromopropionate (EBrP) was used as an initiator (i.e., radical termination was negligible). All of the resulting polymers had low PDI values and molecular weight close to the theoretical ones. The products were analyzed by H-1 and C-13 NMR spectroscopies, size exclusion chromatography (SEC), differential scanning calorimetry (DSC), and matrix-assisted laser desorption-ionization time-of-flight (MALDI-TOF).
|
|
| 9. |
- Carlmark, Anna
(författare)
-
Complex Macromolecular Architectures by Atom Transfer Radical Polymerization
- 2004
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Controlled radical polymerization has proven to be a viableroute to obtain polymers with narrow polydispersities (PDI's)and controlled molecular weights under simple reactionconditions. It also offers control over the chain-]ends of thesynthesized polymer. Atom transfer radical polymerization(ATRP) is the most studied and utilized of these techniques. Inthis study ATRP has been utilized as a tool to obtain differentcomplex macromolecular structures.In order to elaborate a system for which a multitude ofchains can polymerize in a controlled manner and in closeproximity to one another, a multifunctional initiator based onpoly(3-ethyl-3-(hydroxymethyl)oxetane was synthesized. Themacroinitiator was used to initiate ATRP of methyl acrylate(MA). The resulting dendritic-]linear copolymer hybrids hadcontrolled molecular weights and low PDI's. Essentially thesame system was used for the grafting of MA from a solidsubstrate, cellulose. A filter paper was used as cellulosesubstrate and the hydroxyl groups on the cellulose weremodified into bromo-]ester groups, known to initiate ATRP.Subsequent grafting of MA by ATRP on the cellulose made thesurface hydrophobic. The amount of polymer that was attached tothe cellulose could be tailored. In order to control that thesurface polymerization was -eliving-f and hence that thechain-]end functionality was intact, a second layer of ahydrophilic monomer, 2-hydroxyethyl methacrylate, was graftedonto the PMA- grafted cellulose. This dramatically changed thehydrophilicity of the cellulose.Dendronized polymers of generation one, two and three weresynthesized by ATRP of acrylic macromonomers based on2,2-bis(hydroxymethyl)propionic acid. In the macromonomerroute, macromonomers of each generation were polymerized byATRP. The polymerizations resulted in polymers with low PDI's.The kinetics of the reactions were investigated, and thepolymerizations followed first-order kinetics when ethyl2-bromopropionate was used as the initiator. In the-egraft-]onto-f route dendrons were divergently attached to adendronized polymer of generation one, that had been obtainedby ATRP.
|
|
| 10. |
|
|
