| 1. |
- Akram, Asif, 1978, et al.
(author)
-
AEOLIX Living Labs Operational ImpactsAssessment
- 2019
-
Reports (other academic/artistic)abstract
- This document provides the AEOLIX impact assessment of living labs at the operational level. It is based on three main impacts namely business, environment, and socio-economic impacts. The three impacts are sub-divided further into sub-categories. The report collects data from twelve living labs involved in with AEOLIX. One of the main goals of AEOLIX was to reduce the costs for various logistics activities as implemented in twelve living labs. The expected benefits in the business area are from reducing the consumption of different resources, reducing the time used for various activities, and from increasing the productivity in certain areas. The economic or business benefits came along two dimensions: (i) in terms of time and (ii) in terms of money. In terms of time, AEOLIX facilitated reducing the time spent on various activities at the companies. In terms of money, AEOLIX helped to save the costs of specific logistics activities within the living lab. For the environmental aspect an overall value of 20% was set as target value for reduction in CO2 emission using AEOLIX. Only one of all living labs reached this target value, but there was anyhow a reduction found in all living labs. AEOLIX and its functions have also helped in reducing noise pollution at some of the living labs. In some cases, there was quite a considerable reduction. For the socio-economic aspects the job creation, SME empowerment, and the improved quality of life are addressed. This study has explored the impact of AEOLIX on job creation in terms of drivers’ and operators’ jobs. Since the AEOLIX implementation is still in its initial phases, respondents were unable to estimate how many jobs (drivers and/or operators) were created in the long run. SME Empowerment was measured as the increase in SMEs’ market share and the increase in direct collaboration between SMEs and large organizations. The results were meager both with regard to the market share and the extent of collaboration. The improved quality of life is measured in the way AEOLIX puts more focus on work, the less stress at work and a positive attitude towards people using it. The results reflect that AEOLIX has greatly helped employees to put more focus on work and to reduce stress levels. Managers consider this as a positive side of the return on investment (ROI) as the business processes are improved. AEOLIX impact on various socio-economic aspects is in principle positive but as this process is very slow to emerge it takes time to observe any changes in social aspects. Acceptance and trust on AEOLIX can be captured as a majority of the evaluation managers of the living labs found the AEOLIX functions (dashboard, connectivity engine and toolkit) useful to a great extent. The willingness to continue using AEOLIX functions and their usefulness are directly related to each other. This means that the more useful a function is, the more users are willing to continue using it. The AEOLIX platform, through various services and functions, has a positive impact on society in general and on workers in particular. Although this impact cannot be evaluated financially for the first year of the AEOLIX implementation, numerous studies show that a more satisfying and less stressful job, together with a more welcoming and stimulating environment, have an important economic impact in the long-term period. Therefore, the fact that AEOLIX has a positive impact on society will also prove to be an economic benefit for the different companies.
|
|
| 2. |
- André, Hampus, 1989
(author)
-
Resource and Environmental Impacts of Resource-Efficiency Measures Applied to Electronic Products
- 2018
-
Licentiate thesis (other academic/artistic)abstract
- Natural resources such as ecosystems, land, water and metals underpin the functioning of economies and human well-being, and are becoming increasingly scarce due to growth in population and affluence. Metals are increasingly demanded for their specific properties as modern technology develops. The dependence on metals is of growing concern due to the environmental impacts related, for example, to energy use and local impacts from mining, as well as the scarcity risks posed by socio-economic, geological and geopolitical constraints. Thus, there is a clear need to use metals and other natural resources more efficiently. The vision of a circular economy has been proposed as a way to do this, for example by improving durability, reusing, repairing and recycling. Such so-called resource-efficiency (RE) measures are commonly assumed to be environmentally beneficial, although the evidence is not plentiful. It is plausible that focusing on recirculating products and materials could shift burdens to other environmental impacts or life cycle stages. It has therefore been argued that a life cycle-based approach, such as in life cycle assessment (LCA), is useful to critically assess the environmental implications of RE measures. LCA aims to quantify the environmental impacts of products over their entire life cycles - from cradle to grave - assessing a wide range of impacts such as toxicity, climate change and metal resource use. For metal resource use, however, there are a number of perspectives as to what constitutes the actual environmental problem. These perspectives are represented in a variety of life cycle impact assessment methods (LCIA) which have previously been shown to give diverging results. Electronic products are emblematic of metal resource use challenges since they deploy a broad spectrum of scarce metals. This thesis aims to provide knowledge on the potential for RE measures to reduce the environmental impacts of electronic products, by addressing the following research questions: (1) What resource-efficiency measures result in reduced potential environmental impacts and resource use – for what types of products and under what conditions? (2) How does extended use of electronic products through design for increased technical lifetime, reuse and repair affect environmental impacts, particularly metal resource use? (3) How does the application of different LCIA methods for metal resource use influence interpretations of resource-efficiency measures applied to electronic products? This thesis builds on three appended papers which are all based on comparative assessments of resource efficiency, studied as resource use and environmental impacts per function delivered, using LCA and material flow analysis. The results indicate that extended use of electronic products through increasing technical lifetimes, reusing and repairing, is generally resource-efficient. Exceptions may occur, however, if extended use is insufficient to motivate impacts from producing more durable products or spare parts. Use extension of electronic products leads to resource efficiency in two distinct ways: through the intended use extension and by increasingly steering material flows into recycling. Further resource efficiency could be realised by combining RE measures over the entire life cycles of products. With regards to metal resource use, the choice of LCIA method can influence the interpretation of the results of RE measures for electronic products. Therefore, it is advisable to use several complementary LCIA methods to minimise the risks of overlooking potentially important resources issues. Furthermore, better understanding and transparency of such issues is valuable in order to provide more comprehensive information to decision-makers.
|
|
| 3. |
- Johansson, Viktor, 1991, et al.
(author)
-
Value of wind power – Implications from specific power
- 2017
-
In: Energy. - : Elsevier BV. - 0360-5442. ; 126, s. 352-360
-
Journal article (peer-reviewed)abstract
- This paper investigates the marginal system value of increasing the penetration level of wind power, and how this value is dependent upon the specific power (the ratio of the rated power to the swept area). The marginal system value measures the economic value of increasing the wind power capacity. Green-field power system scenarios, with minimised dispatch and investment costs, are modelled for Year 2050 for four regions in Europe that have different conditions for renewable electricity generation. The results show a high marginal system value of wind turbines at low penetration levels in all four regions and for the three specific powers investigated. The cost-optimal wind power penetration levels are up to 40% in low-wind-speed regions, and up to 80% in high-wind–speed regions. The results also show that both favourable solar conditions and access to hydropower benefit the marginal system value of wind turbines. Furthermore, the profile value, which measures how valuable a wind turbine generation profile is to the electricity system, increases in line with a reduction in the specific power for wind power penetration levels of >10%. The profile value shows that the specific power becomes more important as the wind power penetration level increases. © 2017 Elsevier Ltd
|
|
| 4. |
- Pizarro, Amalia, et al.
(author)
-
What is the future potential for imports of combustible municipal waste to countries with extensive district heating networks? A case study of Denmark
- 2015
-
In: Proceedings of Sardinia 2015 Fifteenth International Waste Management and Landfill Symposium. ; 9788862650212
-
Conference paper (peer-reviewed)abstract
- In Europe, landfilling is the most widely used method for managing municipal solid waste. By contrast, the northern European waste market is characterized by high capacities from energy recovery plants, mostly incineration in cogeneration facilities. In Denmark, there is an overcapacity of incineration plants and this study aims to analyse if import of waste is beneficial during an interim period to divert landfilling or if it might be profitable to invest in overcapacity in the long-term in those countries where heat from incineration can be recovered. The energy and waste management system are described through linking of mathematical models, taking a holistic approach. In the short-term it pays off to import waste, avoiding landfilling; however, in the longer-term, benefits from waste trading will depend on the price of heat markets.
|
|
| 5. |
- Sotnikov, Artem, 1985, et al.
(author)
-
Simulations of a solar-assisted block-heating system
- 2017
-
In: ISES Solar World Congress 2017 - IEA SHC International Conference on Solar Heating and Cooling for Buildings and Industry 2017, Proceedings. - Freiburg, Germany : International Solar Energy Society.
-
Conference paper (peer-reviewed)abstract
- Two types of simulation software TRNSYS and Polysun are studied to check their suitability for solar district heating system planning. A reference case, a part of the Vallda Heberg district heating system is modelled in both tools and results are compared with available measured data and with each other. Models are successfully calibrated. TRNSYS and Polysun models have deviations in main key figures compared to the reference case less than 2% and less than 8% respectively. A sensitivity analysis of key parameters shows that the two tools give similar results.
|
|
| 6. |
- Adl-Zarrabi, Bijan, 1959, et al.
(author)
-
Sustainability Assessment of Infrastructure Elements with Integrated Energy Harvesting Technologies
- 2016
-
In: Energy and Environment. - : Wiley. - 9781119307761 ; , s. 221-234
-
Book chapter (other academic/artistic)abstract
- The possibility of integrating energy harvesting devices into the bridge/tunnel structures along Coastal Highway Route E39 has been investigated in a feasibility study by the Norwegian Public Roads Administration (NPRA). The main advantage of integrating energy conversion devices in a structural element is the reduction of costs compared to stand-alone devices. The construction could be used as a foundation, a mooring point and provide a dry environment for electrical devices. Easy access to the production site could also reduce the cost for installation, operation and maintenance. Two important challenges related to harvesting renewable energy by infrastructure elements, without concerning about the energy source, are to store it or feed the energy to the grid. In the second case, tailoring generation to demand is of critical importance. Tasks such as supply and demand management, for instance, peak hour management, what kind of storage should be used - electrical or thermal - need be solved. Furthermore, integrating energy production devices in a structure might cause negative environmental impacts and affect the life expectancy and maintenance costs of such structures. The potential environmental impacts associated with renewable technologies are the consequences for bird life or marine fauna at the fjord crossing locations, as well as noise and visual impact. Thus, a sustainability assessment should be performed in order to quantify the ecological, economical and societal impacts of the suggested alternatives.
|
|
| 7. |
- Ahlgren, Serina, et al.
(author)
-
Review of methodological choices in LCA of biorefinery systems - key issues and recommendations
- 2015
-
In: Biofuels, Bioproducts and Biorefining. - : Wiley. - 1932-1031 .- 1932-104X. ; 9:5, s. 606-619
-
Research review (peer-reviewed)abstract
- The current trend in biomass conversion technologies is toward more efficient utilization of biomass feedstock in multiproduct biorefineries. Many life-cycle assessment (LCA) studies of biorefinery systems have been performed but differ in how they use the LCA methodology. Based on a review of existing LCA standards and guidelines, this paper provides recommendations on how to handle key methodological issues when performing LCA studies of biorefinery systems. Six key issues were identified: (i) goal definition, (ii) functional unit, (iii) allocation of biorefinery outputs, (iv) allocation of biomass feedstock, (v) land use, and (vi) biogenic carbon and timing of emissions. Many of the standards and guidelines reviewed here provide only general methodological recommendations. Some make more specific methodological recommendations, but these often differ between standards. In this paper we present some clarifications (e.g. examples of research questions and suitable functional units) and methodological recommendations (e.g. on allocation).
|
|
| 8. |
- Ancona, M. A., et al.
(author)
-
Efficiency improvement on a cruise ship: Load allocation optimization
- 2018
-
In: Energy Conversion and Management. - : Elsevier BV. - 0196-8904. ; 164, s. 42-58
-
Journal article (peer-reviewed)abstract
- Last years have been characterized by a worldwide increasing attention towards the reduction of fuel consumption and carbon dioxide emissions. Several industrial fields, as well as the civil and residential sector, have introduced innovative approaches for the design and the operation of energy systems. These actions are aimed to reach higher values of energy conversion efficiency, also including an increase in the use of renewable resources. In this context, especially in the sector of cruise ships, further efforts are required to improve the energy efficiency of the employed energy systems. The aim of this paper is to propose an optimization framework based on genetic algorithms in order to maximize the energy efficiency and minimize both the fuel consumption and the thermal energy dissipation, by optimizing the load allocation of the ship energy systems. To this purpose, different strategies for the energy systems on board of an existing cruise ship are proposed and analyzed. In particular, two main engines configurations have been defined: standard (current logic of operation maintained) and hybrid configuration. For each proposed strategy – being the ship a particular and interesting application of isolated energy grid (i.e. a grid without connections with electric and fuel national grids) – an in-house-developed software has been adapted and applied to optimize the load allocation of the various energy systems. Furthermore, an economic and environmental analysis has been carried out, in order to point out the benefits – or the eventual limits – related to the proposed solutions. The considered approach is based on the concept of introducing economically and structurally suitable modifications to the current cruise energy systems configuration, in order to reach the goal of increasing the energy efficiency. The carried out analysis shows that the hybrid strategies allow to reach the best results in terms of energy (fuel consumption and heat dissipation reduction), economic and environmental points of view.
|
|
| 9. |
- Andersson, Karin, 1952, et al.
(author)
-
Shipping and the Environment - Improving Environmental Performance in Marine Transportation
- 2016
-
Book (other academic/artistic)abstract
- This book focuses on the interaction between shipping and the natural environment and how shipping can strive to become more sustainable. Readers are guided in marine environmental awareness, environmental regulations and abatement technologies to assist in decisions on strategy, policy and investments. You will get familiar with possible paths to improve environmental performance and, in the long term, to a sustainable shipping sector, based on an understanding of the sources and mechanisms of common impacts. You will also gain knowledge on emissions anddischarges from ships, prevention measures, environmental regulations, and methods and tools for environmental assessment. In addition, the book includes a chapter on thebackground to regulating pollution from ships. It is intended as a source of information for professionals connected to maritime activities as well as policy makers and interested public. It is also intended as a textbook in higher education academic programmes.
|
|
| 10. |
- Baldi, Francesco, et al.
(author)
-
The cost of innovative and sustainable future ship energy systems
- 2019
-
In: ECOS 2019 - Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. ; , s. 239-250
-
Conference paper (peer-reviewed)abstract
- The latest guidelines approved by the environmental protection committee of the international maritime organization (IMO) will require the shipping sector to reduce its greenhouse gas (GHG) emissions by 50% before 2050 and achieve a complete decarbonization by the end of the century. This will require a major change in the way ships are built and operated today. In this paper, we aim at understanding what types of ship energy systems and fuels will be preferable and what will be the costs to achieve the environmental goals set by IMO for shipping. To do this, we approach the question as an MILP problem, with increasingly stringent constraints on the total GHG emissions and with the objective of minimizing the total cost of ownership. We apply this analysis to three ship types (a containership, a tanker, and a passenger ferry) and we determine what type of choice for the ship’s energy systems will be the most optimal, for each ship type. The results show that the most cost-effective pathway towards the elimination of GHG emissions is composed of a first phase with LNG as fuel and with an increasing use of carbon capture and storage, while the full decarbonisation of the shipping sector will require switching to hydrogen as fuel. These results depend only marginally on the type of ship investigated and on the type of regulation enforced. While the costs required to achieve up to 75% GHG emission reduction are relatively similar to the baseline case (50-70% higher), moving towards a full decarbonisation will require a cost increase ranging between 280% and 340% higher than the business as usual.
|
|
