| 11. |
|
|
| 12. |
- Ashjaei, Mohammad, et al.
(författare)
-
End-to-end Resource Reservations in Distributed Embedded Systems
- 2016
-
Ingår i: Proceedings - 2016 IEEE 22nd International Conference on Embedded and Real-Time Computing Systems and Applications, RTCSA 2016. ; , s. 1-11
-
Konferensbidrag (refereegranskat)abstract
- The resource reservation techniques provide effective means to lower the software complexity, ensure predictability and allow flexibility during the development and execution of complex distributed embedded systems. In this paper we propose a new end-to-end resource reservation model for distributed embedded systems. The model is comprehensive in such a way that it supports end-to-end resource reservations on distributed transactions with various activation patterns that are commonly used in industrial control systems. The model allows resource reservations on processors and real-time network protocols. We also present timing analysis for the distributed embedded systems that are developed using the proposed model. The timing analysis computes the end-to-end response times as well as delays such as data age and reaction delays. The presented analysis also supports real-time networks that can autonomously initiate transmissions. Such networks are not supported by the existing analyses. We also include a case study to show the usability of the model and end-to-end timing analysis with resource reservations.
|
|
| 13. |
- Ashjaei, Mohammad, et al.
(författare)
-
Improved Message Forwarding for Multi-Hop HaRTES Real-Time Ethernet Networks
- 2016
-
Ingår i: Journal of Signal Processing Systems. - : Springer Science and Business Media LLC. - 1939-8018 .- 1939-8115. ; 84:1, s. 47-67
-
Tidskriftsartikel (refereegranskat)abstract
- Nowadays, switched Ethernet networks are used in complex systems that encompass tens to hundreds of nodes and thousands of signals. Such scenarios require multi-switch architectures where communications frequently occur in multiple hops. In this paper we investigate techniques to allow efficient multi-hop communication using HaRTES switches. These are modified Ethernet switches that provide real-time traffic scheduling, dynamic bandwidth management and temporal isolation between real-time and non-real-time traffic. This paper addresses the problem of forwarding traffic in HaRTES networks. Two methods have been recently proposed, namely Distributed Global Scheduling (DGS) that buffers traffic between switches, and Reduced Buffering Scheme (RBS), that uses immediate forwarding. In this paper, we discuss the design and implementation of RBS within HaRTES and we carry out an experimental validation with a prototype implementation. Then, we carry out a comparison between RBS and DGS using worst-case response time analysis and simulation. The comparison clearly establishes the superiority of RBS concerning end-to-end response times. In fact, with sample message sets, we achieved reductions in end-to-end delay that were as high as 80 %.
|
|
| 14. |
- Ashjaei, Mohammad, et al.
(författare)
-
MTU Configuration for Real-Time Switched Ethernet Networks
- 2016
-
Ingår i: Journal of systems architecture. - : Elsevier BV. - 1383-7621 .- 1873-6165. ; 70, s. 15-25
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, we show that in real-time switched Ethernet networks reducing the Maximum Transmission Unit (MTU) size may cause an increase or decrease in the response time of messages. This contradicting behavior arises an optimization problem for configuring the MTU size. We formulate the optimization problem in the context of the multi-hop HaRTES architecture, which is a hard real-time Ethernet protocol. As part of the solution, we propose a search-based algorithm to achieve optimum solutions. We modify the algorithm by presenting two techniques to reduce the search space. Then, we propose a heuristic algorithm with a pseudo-polynomial time complexity based on the search-based algorithm. We perform several experiments, and we show that the proposed heuristic results in an improvement regarding messages response times, compared with configuring the MTU to the maximum or minimum values. Moreover, we show in small network configurations that the heuristic performs as good as the search-based algorithm in many cases.
|
|
| 15. |
- Ashjaei, Mohammad, 1980-
(författare)
-
Real-Time Communication over Switched Ethernet with Resource Reservation
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Due to the need for advanced computer-controlled functionality in distributed embedded systems the requirements on network communication are becoming overly intricate. This dissertation targets the requirements that are concerned with real-time guarantees, run-time adaptation, resource utilization and flexibility during the development. The Flexible Time-Triggered Switched Ethernet (FTT-SE) and Hard Real-Time Ethernet Switching (HaRTES) network architectures have emerged as two promising solutions that can cater for these requirements. However, these architectures do not support multi-hop communication as they are originally developed for single-switch networks. This dissertation presents a fundamental contribution in multi-hop real-time communication over the FTT-SE and HaRTES architectures targeting the above mentioned requirements. It proposes and evaluates various solutions for scheduling and forwarding the traffic through multiple switches in these architectures. These solutions preserve the ability of dynamic adaptation without jeopardizing real-time properties of the architectures. Moreover, the dissertation presents schedulability analyses for the timeliness verification and evaluation of the proposed solutions as well as several protocols to support run-time adaptation in the multi-hop communication. Finally, the work led to an end-to-end resource reservation framework, based on the proposed multi-hop architectures, to support flexibility during the development of the systems. The efficiency of the proposed solutions is evaluated on various case studies that are inspired from industrial systems.
|
|
| 16. |
- Ashjaei, Mohammad, 1980-, et al.
(författare)
-
Schedulability Analysis of Ethernet Audio Video Bridging Networks with Scheduled Traffic Support
- 2017
-
Ingår i: Real-time systems. - : Springer Science and Business Media LLC. - 0922-6443 .- 1573-1383. ; 53:4, s. 526-577
-
Tidskriftsartikel (refereegranskat)abstract
- The IEEE Audio Video Bridging (AVB) technology is nowadays under consideration in several automation domains, such as, automotive, avionics, and industrial communications. AVB offers several benefits, such as open specifications, the existence of multiple providers of electronic components, and the real-time support, as AVB provides bounded latency to real-time traffic classes. In addition to the above mentioned properties, in the automotive domain, comparing with the existing in-vehicle networks, AVB offers significant advantages in terms of high bandwidth, significant reduction of cabling costs, thickness and weight, while meeting the challenging EMC/EMI requirements. Recently, an improvement of the AVB protocol, called the AVB ST, was proposed in the literature, which allows for supporting scheduled traffic, i.e., a class of time-sensitive traffic that requires time-driven transmission and low latency. In this paper, we present a schedulability analysis for the real-time traffic crossing through the AVB ST network. In addition, we formally prove that, if the bandwidth in the network is allocated according to the AVB standard, the schedulability test based on response time analysis will fail for most cases even if, in reality, these cases are schedulable. In order to provide guarantees based on analysis test a bandwidth over-reservation is required. In this paper, we propose a solution to obtain a minimized bandwidth over-reservation. To the best of our knowledge, this is the first attempt to formally spot the limitation and to propose a solution for overcoming it. The proposed analysis is applied to both the AVB standard and the AVB ST. The analysis results are compared with the results of several simulative assessments, obtained using OMNeT++, on both automotive and industrial case studies. The comparison between the results of the analysis and the simulation ones shows the effectiveness of the analysis proposed in this work.
|
|
| 17. |
- Ashjaei, Mohammad, et al.
(författare)
-
SEtSim : A modular simulation tool for switched Ethernet networks
- 2016
-
Ingår i: Journal of systems architecture. - : Elsevier BV. - 1383-7621 .- 1873-6165. ; 65, s. 1-14
-
Tidskriftsartikel (refereegranskat)abstract
- Using high bandwidth network technologies in real-time applications, for example in automotive systems, is rapidly increasing. In this context, switched Ethernet-based protocols are becoming more popular due to their features such as providing a collision-free domain for transmission of messages. Moreover, switched Ethernet is a mature technology. Several protocols based on switched Ethernet have been proposed over the years, tuned for time critical applications. However, research for improving the features and performance of these protocols is still on-going. In order to evaluate the performance of early stage proposed protocols, the mathematical analysis and/or experiments are required. However, performing an experiment for complex network topologies with a large set of messages is not effortless. Therefore, using a simulation based approach for evaluating a protocol's performance and/or properties is highly useful. As a response to this we have developed a simulator, called SEtSim, for switched Ethernet networks. SEtSim is developed based on Simulink, and it currently supports different network topologies of the FIT-SE protocol as well as Ethernet AVB protocol. However, the kernel of SEtSim is designed such that it is possible to add and integrate other switched Ethernet-based protocols. In this paper, we describe the design of SEtSim and we show its scalability.
|
|
| 18. |
- Balasubramanian, S.M.N, et al.
(författare)
-
A dual shared stack for FSLM in Erika enterprise
- 2017
-
Ingår i: The 23rd IEEE International Conference on Embedded and Real-Time Computing Systems and Applications - WiP Session RTCSA'17.
-
Konferensbidrag (refereegranskat)abstract
- Recently, the flexible spin-lock model (FSLM) has been introduced, unifying spin-based and suspension-based resource sharing protocols for real-time multi-core platforms. Unlike the multiprocessor stack resource policy (MSRP), FSLM doesn’t allow tasks on a core to share a single stack, however. In this paper, we present a hypothesis claiming that for a restricted range of spin-lock priorities, FSLM requires only two stacks. We briefly describe our implementation of a dual stack for FSLM in the Erika Enterprise RTOS as instantiated on an Altera Nios II platform using 4 soft-core processors.
|
|
| 19. |
- Balasubramanian, S.M.N, et al.
(författare)
-
Incorporating implementation overheads in the analysis for the flexible spin-lock model
- 2017
-
Ingår i: IECON 2017 - 43RD ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY. - 9781538611272 ; , s. 411-8418
-
Konferensbidrag (refereegranskat)abstract
- The flexible spin-lock model (FSLM) unifies suspension-based and spin-based resource sharing protocols for partitioned fixed-priority preemptive scheduling based real-time multiprocessor platforms. Recent work has been done in defining the protocol for FSLM and providing a schedulability analysis without accounting for the implementation overheads. In this paper, we extend the analysis for FSLM with implementation overheads. Utilizing an initial implementation of FSLM in the OSEK/VDX-compliant Erika Enterprise RTOS on an Altera Nios II platform using 4 soft-core processors, we present an improved implementation. Given the design of the implementation, the overheads are characterized and incorporated in specific terms of the existing analysis. The paper also supplements the analysis with measurement results, enabling an analytical comparison of FSLM with the natively provided multiprocessor stack resource policy (MSRP), which may serve as a guideline for the choice of FSLM or MSRP for a specific application.
|
|
| 20. |
- Balasubramanian, S. M. N., et al.
(författare)
-
Practical challenges for FSLM
- 2018
-
Ingår i: Proceedings - 2018 IEEE 24th International Conference on Embedded and Real-Time Computing Systems and Applications, RTCSA 2018. - : Institute of Electrical and Electronics Engineers Inc.. - 9781538677599 ; , s. 238-239
-
Konferensbidrag (refereegranskat)abstract
- The flexible spin-lock model (FSLM) unifies suspension-based and spin-based resource access protocols for partitioned fixed-priority preemptive scheduling based real-time multi-core platforms. Recent work has been done in defining the protocol for FSLM, providing schedulability analysis, and investigating the practical consequences of the theoretical model. FSLM complies to the AUTOSAR standard for the automotive industry, and prototype implementations of FSLM in the OSEK/VDX-complaint Erika Enterprise Real-Time Operating System have been realized. In this paper, we briefly describe some practical challenges to improve efficiency and generality.
|
|
