| 11. |
- Ayeni, O. R., et al.
(författare)
-
Clinical and Radiographic Criteria Define "Acceptable" Surgical Correction of Hip Femoroacetabular Impingement Syndrome as Well as Postoperative Complications: An International Modified Delphi Study
- 2023
-
Ingår i: Arthroscopy-the Journal of Arthroscopic and Related Surgery. - : Elsevier BV. - 0749-8063. ; 39:5, s. 1198-1210
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives: To develop recommendations for clinical and radiographic criteria to help define the "acceptable" surgical correction of femoroacetabular impingement syndrome (FAIS) and identify/define complications postoperatively. Methods: A 3-phase modified Delphi study was conducted involving a case-based survey; a Likert/multiple choice-based survey concerning radiographic and physical examination characteristics to help define FAIS correction, as well as the prevalence and definition of potential postoperative complications; and 2 consensus meetings. Results: Of the 75 experts invited, 54 completed the Phase I survey, 50 completed the Phase II survey (72% and 67% response rate), and 50 participated in the Phase III consensus meetings. For both typical and atypical (complex) cases, there was consensus that fluoroscopy with multiple views and dynamic hip assessment should be used intraoperatively (96% and 100%, respectively). For typical FAIS cases, the Expert Panel agreed that Dunn lateral and anteroposterior radiographs were the most important radiographs to evaluate the hip postoperatively (88%, consensus). When asked about evaluating the correction of cam impingement postoperatively, 87% voted that they use subjective evaluation of the "sphericity" of the femoral head. In the case of focal and global pincer-type FAIS, there was consensus that the reduction or elimination of the crossover sign (84%) and lateral center-edge angle (91%) were important to inform the extent of the FAIS correction. There was consensus for recommending further investigation at 6 months postoperatively if hip pain had increased/plateaued (92% agreed); that additional investigation and treatment should occur between 6 and 12 months (90% agreed); and that a reoperation may be recommended at 12 months or later following this investigation period (89% agreed). Conclusions: This consensus project identified the importance of using fluoroscopy and dynamic hip assessment intraoperatively; Dunn lateral and anteroposterior view radiographs postoperatively; evaluating the "sphericity" of the femoral head for cam-type correction and the use of dynamic hip assessment; reducing/eliminating the crossover sign for focal pincertype FAIS; evaluating the lateral center-edge angle for global pincer-type FAIS; and avoiding overcorrection of pincer-type FAIS. In cases in which postoperative hip pain increased/plateaued, further investigation and treatment is warranted between 6 and 12 months, and a reoperation may be recommended at a minimum of 12 months depending on the cause of the hip pain. Clinical Relevance: Hip arthroscopy surgeons have yet to reach a firm agreement on what constitutes an "acceptable" or "good" surgery radiographically and how they can achieve desired clinical outcomes. Although this was a comprehensive effort, more study is needed to determine therapeutic thresholds that can be universally applied.
|
|
| 12. |
-
The Seventeenth Data Release of the Sloan Digital Sky Surveys : Complete Release of MaNGA, MaStar, and APOGEE-2 Data
- 2022
-
Ingår i: Astrophysical Journal Supplement Series. - : Institute of Physics (IOP). - 0067-0049 .- 1538-4365. ; 259:2
-
Tidskriftsartikel (refereegranskat)abstract
- This paper documents the seventeenth data release (DR17) from the Sloan Digital Sky Surveys; the fifth and final release from the fourth phase (SDSS-IV). DR17 contains the complete release of the Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) survey, which reached its goal of surveying over 10,000 nearby galaxies. The complete release of the MaNGA Stellar Library accompanies this data, providing observations of almost 30,000 stars through the MaNGA instrument during bright time. DR17 also contains the complete release of the Apache Point Observatory Galactic Evolution Experiment 2 survey that publicly releases infrared spectra of over 650,000 stars. The main sample from the Extended Baryon Oscillation Spectroscopic Survey (eBOSS), as well as the subsurvey Time Domain Spectroscopic Survey data were fully released in DR16. New single-fiber optical spectroscopy released in DR17 is from the SPectroscipic IDentification of ERosita Survey subsurvey and the eBOSS-RM program. Along with the primary data sets, DR17 includes 25 new or updated value-added catalogs. This paper concludes the release of SDSS-IV survey data. SDSS continues into its fifth phase with observations already underway for the Milky Way Mapper, Local Volume Mapper, and Black Hole Mapper surveys.
|
|
| 13. |
|
|
| 14. |
- Sonderby, Ida E., et al.
(författare)
-
Dose response of the 16p11.2 distal copy number variant on intracranial volume and basal ganglia
- 2020
-
Ingår i: Molecular Psychiatry. - : Nature Publishing Group. - 1359-4184 .- 1476-5578. ; 25:3, s. 584-602
-
Tidskriftsartikel (refereegranskat)abstract
- Carriers of large recurrent copy number variants (CNVs) have a higher risk of developing neurodevelopmental disorders. The 16p11.2 distal CNV predisposes carriers to e.g., autism spectrum disorder and schizophrenia. We compared subcortical brain volumes of 12 16p11.2 distal deletion and 12 duplication carriers to 6882 non-carriers from the large-scale brain Magnetic Resonance Imaging collaboration, ENIGMA-CNV. After stringent CNV calling procedures, and standardized FreeSurfer image analysis, we found negative dose-response associations with copy number on intracranial volume and on regional caudate, pallidum and putamen volumes (β = −0.71 to −1.37; P < 0.0005). In an independent sample, consistent results were obtained, with significant effects in the pallidum (β = −0.95, P = 0.0042). The two data sets combined showed significant negative dose-response for the accumbens, caudate, pallidum, putamen and ICV (P = 0.0032, 8.9 × 10−6, 1.7 × 10−9, 3.5 × 10−12 and 1.0 × 10−4, respectively). Full scale IQ was lower in both deletion and duplication carriers compared to non-carriers. This is the first brain MRI study of the impact of the 16p11.2 distal CNV, and we demonstrate a specific effect on subcortical brain structures, suggesting a neuropathological pattern underlying the neurodevelopmental syndromes.
|
|
| 15. |
|
|
| 16. |
|
|
| 17. |
- Corsetti, M., et al.
(författare)
-
Chronic constipation in adults: Contemporary perspectives and clinical challenges. 2: Conservative, behavioural, medical and surgical treatment
- 2021
-
Ingår i: Neurogastroenterology and Motility. - : Wiley. - 1350-1925 .- 1365-2982.
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Chronic constipation is a prevalent disorder that affects quality of life of patients and consumes resources in healthcare systems worldwide. In clinical practice, it is still considered a challenge as clinicians frequently are unsure as to which treatments to use and when. Over a decade ago, a Neurogastroenterology and Motility journal supplement devoted to the investigation and management of constipation was published (Neurogastroenterol Motil 2009;21(Suppl 2):1). In October 2018, the 3rd London Masterclass, entitled "Contemporary management of constipation" was held. The faculty members of this symposium were invited to write two reviews to present a collective synthesis of talks presented and discussions held during this meeting. The first review addresses epidemiology, diagnosis, clinical associations, pathophysiology, and investigation. Purpose: The present is the second of these reviews, providing contemporary perspectives and clinical challenges regarding behavioral, conservative, medical, and surgical treatments for patients presenting with constipation. It includes a management algorithm to guide clinical practice.
|
|
| 18. |
- Thompson, PM, et al.
(författare)
-
ENIGMA and global neuroscience: A decade of large-scale studies of the brain in health and disease across more than 40 countries
- 2020
-
Ingår i: Translational psychiatry. - : Springer Science and Business Media LLC. - 2158-3188. ; 10:1, s. 100-
-
Tidskriftsartikel (refereegranskat)abstract
- This review summarizes the last decade of work by the ENIGMA (Enhancing NeuroImaging Genetics through Meta Analysis) Consortium, a global alliance of over 1400 scientists across 43 countries, studying the human brain in health and disease. Building on large-scale genetic studies that discovered the first robustly replicated genetic loci associated with brain metrics, ENIGMA has diversified into over 50 working groups (WGs), pooling worldwide data and expertise to answer fundamental questions in neuroscience, psychiatry, neurology, and genetics. Most ENIGMA WGs focus on specific psychiatric and neurological conditions, other WGs study normal variation due to sex and gender differences, or development and aging; still other WGs develop methodological pipelines and tools to facilitate harmonized analyses of “big data” (i.e., genetic and epigenetic data, multimodal MRI, and electroencephalography data). These international efforts have yielded the largest neuroimaging studies to date in schizophrenia, bipolar disorder, major depressive disorder, post-traumatic stress disorder, substance use disorders, obsessive-compulsive disorder, attention-deficit/hyperactivity disorder, autism spectrum disorders, epilepsy, and 22q11.2 deletion syndrome. More recent ENIGMA WGs have formed to study anxiety disorders, suicidal thoughts and behavior, sleep and insomnia, eating disorders, irritability, brain injury, antisocial personality and conduct disorder, and dissociative identity disorder. Here, we summarize the first decade of ENIGMA’s activities and ongoing projects, and describe the successes and challenges encountered along the way. We highlight the advantages of collaborative large-scale coordinated data analyses for testing reproducibility and robustness of findings, offering the opportunity to identify brain systems involved in clinical syndromes across diverse samples and associated genetic, environmental, demographic, cognitive, and psychosocial factors.
|
|
| 19. |
- Scott, S. M., et al.
(författare)
-
Chronic constipation in adults: Contemporary perspectives and clinical challenges. 1: Epidemiology, diagnosis, clinical associations, pathophysiology and investigation
- 2021
-
Ingår i: Neurogastroenterology and Motility. - : Wiley. - 1350-1925 .- 1365-2982. ; 33:6
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND Chronic constipation is a prevalent disorder that affects patients' quality of life and consumes resources in healthcare systems worldwide. In clinical practice, it is still considered a challenge as clinicians frequently are unsure as to which treatments to use and when. Over a decade ago, a Neurogastroenterology & Motility journal supplement devoted to the investigation and management of constipation was published (2009; 21 (Suppl.2)). This included seven articles, disseminating all themes covered during a preceding 2-day meeting held in London, entitled "Current perspectives in chronic constipation: a scientific and clinical symposium." In October 2018, the 3rd London Masterclass, entitled "Contemporary management of constipation" was held, again over 2 days. All faculty members were invited to author two new review articles, which represent a collective synthesis of talks presented and discussions held during this meeting. PURPOSE This article represents the first of these reviews, addressing epidemiology, diagnosis, clinical associations, pathophysiology, and investigation. Clearly, not all aspects of the condition can be covered in adequate detail; hence, there is a focus on particular "hot topics" and themes that are of contemporary interest. The second review addresses management of chronic constipation, covering behavioral, conservative, medical, and surgical therapies.
|
|
| 20. |
- Backes, Claudia, et al.
(författare)
-
Production and processing of graphene and related materials
- 2020
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
