| 1. |
- Coll, M., et al.
(författare)
-
Towards Oxide Electronics: a Roadmap
- 2019
-
Ingår i: Applied Surface Science. - : Elsevier BV. - 0169-4332 .- 1873-5584. ; 482, s. 1-93
-
Tidskriftsartikel (refereegranskat)abstract
- At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore’s law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community. Oxide science and technology has been the target of a wide four-year project, named Towards Oxide-Based Electronics (TO-BE), that has been recently running in Europe and has involved as participants several hundred scientists from 29 EU countries. In this review and perspective paper, published as a final deliverable of the TO-BE Action, the opportunities of oxides as future electronic materials for Information and Communication Technologies ICT and Energy are discussed. The paper is organized as a set of contributions, all selected and ordered as individual building blocks of a wider general scheme. After a brief preface by the editors and an introductory contribution, two sections follow. The first is mainly devoted to providing a perspective on the latest theoretical and experimental methods that are employed to investigate oxides and to produce oxide-based films, heterostructures and devices. In the second, all contributions are dedicated to different specific fields of applications of oxide thin films and heterostructures, in sectors as data storage and computing, optics and plasmonics, magnonics, energy conversion and harvesting, and power electronics.
|
|
| 2. |
- Hagfeldt, A., et al.
(författare)
-
Dye-sensitized photoelectrochemical cells
- 2018. - 3
-
Ingår i: McEvoy's Handbook of Photovoltaics: Fundamentals and Applications. - : Elsevier BV. ; , s. 503-565
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Production cost per peak watt of solar electricity produced is critical to various PV technologies and second-generation thin-film solar cells. The dye-sensitized solar cell (DSC), a molecular solar cell technology, has the potential to significantly lower production costs below previous PV technologies. DSC research groups have been established around the world. Integration into different products opens up new commercial opportunities for niche applications with large flexibilities in product shape, color, and transparency.
|
|
| 3. |
- Xu, Bo, et al.
(författare)
-
Tailor-Making Low-Cost Spiro[fluorene-9,9′-xanthene]-Based 3D Oligomers for Perovskite Solar Cells
- 2017
-
Ingår i: Chem. - : Elsevier. - 2451-9308 .- 2451-9294. ; 2:5, s. 676-687
-
Tidskriftsartikel (refereegranskat)abstract
- The power-conversion efficiencies (PCEs) of perovskite solar cells (PSCs) have increased rapidly from about 4% to 22% during the past few years. One of the major challenges for further improvement of the efficiency of PSCs is the lack of sufficiently good hole transport materials (HTMs) to efficiently scavenge the photogenerated holes and aid the transport of the holes to the counter-electrode in the PSCs. In this study, we tailor-made two low-cost spiro[fluorene-9,9′-xanthene] (SFX)-based 3D oligomers, termed X54 and X55, by using a one-pot synthesis approach for PSCs. One of the HTMs, X55, gives a much deeper HOMO level and a higher hole mobility and conductivity than the state-of-the-art HTM, Spiro-OMeTAD. PSC devices based on X55 as the HTM show a very impressive PCE of 20.8% under 100 mW·cm−2 AM1.5G solar illumination, which is much higher than the PCE of the reference devices based on Spiro-OMeTAD (18.8%) and X54 (13.6%) under the same conditions.
|
|
| 4. |
- Bi, D., et al.
(författare)
-
Facile synthesized organic hole transporting material for perovskite solar cell with efficiency of 19.8%
- 2016
-
Ingår i: Nano Energy. - : Elsevier. - 2211-2855. ; 23, s. 138-144
-
Tidskriftsartikel (refereegranskat)abstract
- The exploration of alternative molecular hole-transporting materials (HTMs) specifically for high performance perovskite solar cells (PSCs) is a relatively recent research area. Aiming for further increasing the 'efficiency-cost ratio' of PSCs, we developed a spiro[fluorene-9,9'-xanthene] based HTM (X59) via two-step synthesis from commercial precursors for perovskite solar cells (PSCs) that works as effectively as the well-known HTM-Spiro-OMeTAD-based device under the same conditions. The molecular structure was analyzed by X-ray crystallography indicating a similar packing regime as for Spiro-OMeTAD. An impressive PCE of 19.8% was achieved by using X59 as HTM in PSC, which can compete with the record PCE of 20.8% by using the state-of-the-art-HTM Spiro-OMeTAD (Tress et al., 2016) [1]. The optimized devices employing X59 as HTM exhibited minimized hysteresis, excellent reproducibility and reasonable stability under dark and dry conditions. The present finding highlights the potential of spiro-type HTM for high performance PSCs and paves the way to a much deceased fabrication cost for potential commercialization of perovskite solar panels.
|
|
| 5. |
- Freitag, Marina, et al.
(författare)
-
Supramolecular Hemicage Cobalt Mediators for Dye-Sensitized Solar Cells
- 2016
-
Ingår i: ChemPhysChem. - : Wiley. - 1439-4235 .- 1439-7641. ; 17:23, s. 3845-3852
-
Tidskriftsartikel (refereegranskat)abstract
- A new class of dye-sensitized solar cells (DSSCs) using the hemicage cobalt-based mediator [Co(ttb)](2+/3+) with the highly preorganized hexadentate ligand 5,5 '', 5 ''''-((2,4,6-triethyl benzene-1,3,5-triyl)tris(ethane-2,1-diyl))tri-2,2'-bipyridine (ttb) has been fully investigated. The performances of DSSCs sensitized with organic D-p-A dyes utilizing either [Co(ttb)](2+/3+) or the conventional [Co(bpy)(3)](2+/3+) (bpy = 2,2'-bipyridine) redox mediator are comparable under 1000 Wm(-2) AM 1.5 G illumination. However, the hemicage complexes exhibit exceptional stability under thermal and light stress. In particular, a 120-hour continuous light illumination stability test for DSSCs using [Co(ttb)](2+/3+) resulted in a 10% increase in the performance, whereas a 40% decrease in performance was found for [Co(bpy)(3)](2+/3+) electrolyte-based DSSCs under the same conditions. These results demonstrate the great promise of [Co(ttb)](2+/3+) complexes as redox mediators for efficient, cost-effective, large-scale DSSC devices.
|
|
| 6. |
- Svanström, Sebastian, et al.
(författare)
-
Toward an alternative approach for the preparation of low-temperature titanium dioxide blocking underlayers for perovskite solar cells
- 2019
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 7:17, s. 10729-10738
-
Tidskriftsartikel (refereegranskat)abstract
- The anodic electrodeposition method is investigated as an alternative technique for the preparation of a titanium oxide (TiO 2 ) blocking underlayer (UL) for perovskite solar cells (PSCs). Extremely thin Ti IV -based films are grown from aqueous acidic titanium(iii) chloride in an electrochemical cell at room temperature. This precursor layer is converted to the UL (ED-UL), in a suitable state for PSC applications, by undertaking a sintering step at 450 °C for half an hour. PSCs with the composition of the light-absorbing material FA 0.85 MA 0.10 Cs 0.05 Pb(I 0.87 Br 0.13 ) 3 (FA and MA denote the formamidinium and methylammonium cations, respectively) based on the ED-UL are compared with PSCs with the UL of a standard type prepared by the spray-pyrolysis method at 450 °C from titanium diisopropoxide bis(acetylacetonate) (SP-UL). We obtain power conversion efficiencies (PCEs) of over 20% for mesoscopic perovskite devices employing both ED-ULs and SP-ULs. Slightly higher fill factor values are observed for ED-UL-based devices. In addition, ED-ULs prepared by the same method have also been applied in planar PSCs, resulting in a PCE exceeding 17%, which is comparable to that for similar PSCs with an SP-UL. The preparation of ED-ULs with a lower sintering temperature, 150 °C, has also been examined. The efficiency of a planar PSC incorporating this underlayer was 14%. These results point out to the possibility of applying ED-ULs in flexible planar PSCs in the future.
|
|
| 7. |
- Yang, Lei, et al.
(författare)
-
Experimental and Theoretical Investigation of the Function of 4- tert -Butyl Pyridine for Interface Energy Level Adjustment in Efficient Solid-State Dye-Sensitized Solar Cells
- 2018
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society. - 1944-8244 .- 1944-8252. ; 10:14, s. 11572-11579
-
Tidskriftsartikel (refereegranskat)abstract
- 4-tert-Butylpyridine (t-BP) is commonly used in solid state dye-sensitized solar cells (ssDSSCs) to increase the photovoltaic performance. In this report, the mechanism how t-BP functions as a favorable additive is investigated comprehensively. ssDSSCs were prepared with different concentrations of t-BP, and a clear increase in efficiency was observed up to a maximum concentration and for higher concentrations the efficiency thereafter decreases. The energy level alignment in the complete devices was measured using hard X-ray photoelectron spectroscopy (HAXPES). The results show that the energy levels of titanium dioxide are shifted further away from the energy levels of spiro-OMeTAD as the t-BP concentration is increased. This explains the higher photovoltage obtained in the devices with higher t-BP concentration. In addition, the electron lifetime was measured for the devices and the electron lifetime was increased when adding t-BP, which can be explained by the recombination blocking effect at the surface of TiO2. The results from the HAXPES measurements agree with those obtained from density functional theory calculations and give an understanding of the mechanism for the improvement, which is an important step for the future development of solar cells including t-BP.
|
|
| 8. |
|
|
