| 1. |
- Litnovsky, A., et al.
(författare)
-
Diagnostic mirrors for ITER : A material choice and the impact of erosion and deposition on their performance
- 2007
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 363, s. 1395-1402
-
Tidskriftsartikel (refereegranskat)abstract
- Metal mirrors will be implemented in about half of the ITER diagnostics. Mirrors in ITER will have to withstand radiation loads, erosion by charge-exchange neutrals, deposition of impurities, particle implantation and neutron irradiation. It is believed that the optical properties of diagnostic mirrors will be primarily influenced by erosion and deposition. A solution is needed for optimal performance of mirrors in ITER throughout the entire lifetime of the machine. A multi-machine research on diagnostic mirrors is currently underway in fusion facilities at several institutions and laboratories worldwide. Among others, dedicated investigations of ITER-candidate mirror materials are ongoing in Tore-Supra, TEXTOR, DIII-D, TCV, T-10 and JET. Laboratory studies are underway at IPP Kharkov (Ukraine), Kurchatov Institute (Russia) and the University of Basel (Switzerland). An overview of current research on diagnostic mirrors along with an outlook on future investigations is the subject of this paper.
|
|
| 2. |
- Sergienko, G., et al.
(författare)
-
Erosion of a tungsten limiter under high heat flux in TEXTOR
- 2007
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 363, s. 96-100
-
Tidskriftsartikel (refereegranskat)abstract
- Erosion characteristics of a tungsten plate heated up in TEXTOR by the plasma load have been investigated at temperatures extending to the melting point. No enhancement of atomic release exceeding physical sputtering and normal thermal sublimation for temperatures below 3700 K was observed. The liquid tungsten moved fast along the plate in the direction perpendicular to the magnetic field lines. The motion is caused by the Lorentz force due to the thermoelectron current emitted from the hot tungsten surface. The motion of liquid tungsten caused a material loss of 2.85 g during two discharges. The material redistribution due to the melt layer motion is compared with a MEMOS-1.5D simulation.
|
|
| 3. |
- Emmoth, Birger, et al.
(författare)
-
Fuel removal from bumper limiter tiles by using a pulsed excimer laser
- 2005
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 337-39:1-3, s. 639-643
-
Tidskriftsartikel (refereegranskat)abstract
- Samples of a limiter tile from the TEXTOR tokamak were investigated by scanning electron microscopy and nuclear reaction analysis both before and after laser heating. SEM images showed spheres and thin flakes covering the surface which are the areas modified by plasma particles striking under grazing angles. Due to roughness of the surface there are shadowed regions between the 'flakes'. Laser pulses did not lead to expected common ablation of the surface. Features that looked like 'melting' of thin surface layers were rather observed. The initial deuterium content in the surface layer of tiles was of the order of 10(18) D atoms per cm(2). After the laser light impact the content decreased with 60-70%; by reducing the deposited power by a factor four, the deuterium content was decreased by 40-50%. We make the interpretation that we approach a threshold of the laser detritiation method in fusion devices.
|
|
| 4. |
- Emmoth, Birger, et al.
(författare)
-
In-situ measurements of carbon and deuterium deposition using the fast reciprocating probe in TEXTOR
- 2009
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 390-91, s. 179-182
-
Tidskriftsartikel (refereegranskat)abstract
- Silicon samples were exposed in the scrape-off layer of the TEXTOR plasma using a fast reciprocating probe, with the aim of studying carbon deposition and deuterium retention during Dynamic Ergodic Divertor (DED) operation. Separate samples were exposed for 300 ms at the flat-top phase of neutral beam heated discharges. The exposure conditions were varied on a shot-to-shot basis by external magnetic perturbations generated by the DED in the m/n = 3/1, DC regime, base configuration. Nuclear Reaction Analysis (NRA) was used to characterise collector sample surfaces after their exposure. Enhanced concentrations of both carbon and deuterium (C 3-10 x 10(16) at./cm(2), D 8-60 x 10(15) at./cm(2)) were found. The D/C ratio was less than unity which indicates that most of the carbon and deuterium were co-deposited. Carbon e-folding lengths of about 2 cm were found on both toroidal sides of the probe independent of DED perturbations.
|
|
| 5. |
- Litnovsky, A., et al.
(författare)
-
Carbon deposition and fuel accumulation in a castellated limiter exposed under erosion-dominated conditions in the SOL of TEXTOR
- 2005
-
Ingår i: 32nd EPS Conference on Plasma Physics 2005, EPS 2005, Held with the 8th International Workshop on Fast Ignition of Fusion Targets. - 9781622763320 ; , s. 361-364
-
Konferensbidrag (refereegranskat)abstract
- Castellated limiter with ITER-like geometry was exposed under the erosion-dominated conditions in the SOL of TEXTOR. After the exposure, deposits were found in the gaps, with a negligible amount of deposited material that was detected on top surfaces open to the plasma. The thickest deposits are located on plasma shadowed sides of the gaps with maximum thickness up to 0.5 μm on the plasma closest locations as it was measured with SIMS diagnostic. The deposit thickness decrease exponentially with the depth of gaps with e-folding length of 1.7-2 mm as inferred from EPMA measurements. Material intermixing was found to occur in the deposited layers. Deposits are mixed Mo:C:D:O:B:H layers. Gaps contain at least (5÷10)×1016 of D fuel atoms per cm2. This corresponds roughly to 0.02÷0.04 % of total averaged D fluence impinging on the castellation.
|
|
| 6. |
- Ratynskaia, Svetlana V., et al.
(författare)
-
Capture by aerogel-characterization of mobile dust in tokamak scrape-off layer plasmas
- 2009
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 49:12
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this letter is to demonstrate the feasibility and potential of the novel in situ dust diagnostic method-capture by aerogel targets. Aerogel, a highly porous material with a density of a few tens of kg m(-3), allows capturing of dust particles present during the discharge without destroying them. The first exposures in the TEXTOR scrape-off layer plasma showed that such targets are able to capture both slow and fast particles with sizes in the range from submicrometre to similar to 100 mu m. The technique provides information on dust velocity and size distribution as well as dust flux estimates. The composition and texture of the captured dust can also be studied in detail to shed light on dust formation processes.
|
|
| 7. |
- De Temmerman, G., et al.
(författare)
-
Interactions of diamond surfaces with fusion relevant plasmas
- 2009
-
Ingår i: Physica scripta. T. - : Institute of Physics Publishing (IOPP). - 0281-1847 .- 0031-8949 .- 1402-4896. ; T138, s. 014013-
-
Tidskriftsartikel (refereegranskat)abstract
- The outstanding thermal properties of diamond and its low reactivity towards hydrogen may make it an attractive plasma-facing material for fusion and calls for a proper evaluation of its behaviour under exposure to fusion-relevant plasma conditions. Micro and nanocrystalline diamond layers, deposited on Mo and Si substrates by hot filament chemical vapour deposition (CVD), have been exposed both in tokamaks and in linear plasma devices to measure the erosion rate of diamond and study the modification of the surface properties induced by particle bombardment. Experiments in Pilot-PSI and PISCES-B have shown that the sputtering yield of diamond (both physical and chemical) was a factor of 2 lower than that of graphite. Exposure to detached plasma conditions in the DIII-D tokamak have evidenced a strong resistance of diamond against erosion under those conditions.
|
|
| 8. |
- Litnovsky, Andrey, et al.
(författare)
-
Carbon transport, deposition and fuel accumulation in castellated structures exposed in TEXTOR
- 2007
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 367, s. 1481-1486
-
Tidskriftsartikel (refereegranskat)abstract
- In order to maintain the thermo-mechanical durability of ITER it is proposed to castellate the interior surface of the first wall and divertor by splitting them into small-size cells [W. Daener et a]., Fusion Eng. Des. 61&62 (2002) 61]. A concern is the accumulation of fuel in the gaps of the castellation. In TEXTOR, molybdenum limiters were exposed in the scrape-off layer (SOL) plasma to assess fuel accumulation. The first limiter was exposed under deposition-dominated conditions. Carbon deposits were formed both on top surfaces and in the gaps. About 0.12% of the impinging D-fluence was found in the gaps. Another castellated limiter was exposed under erosion-dominated conditions. Deposited layers were found only on the plasma shadowed areas of the gaps. A significant amount of molybdenum from the limiter was found intermixed in the deposit. The gaps contained similar to 0.03% of the impinging D-fluence. Modeling was performed to simulate carbon transport into the gaps.
|
|
| 9. |
- Litnovsky, A., et al.
(författare)
-
Direct comparative test of single crystal and polycrystalline diagnostic mirrors exposed in TEXTOR in erosion conditions
- 2005
-
Ingår i: 32nd EPS Conference on Plasma Physics 2005, EPS 2005, Held with the 8th International Workshop on Fast Ignition of Fusion Targets. - 9781622763320 ; , s. 1726-1729
-
Konferensbidrag (refereegranskat)abstract
- First direct comparative test of single crystal and polycrystalline diagnostic mirror materials under erosion conditions has been made in TEXTOR. Before exposure in TEXTOR, glow discharge cleaning has efficiently restored the reflectivity of initially oxidized mirrors. After the exposure, no significant changes in total reflectivity were observed. Drastic increase of diffuse reflectivity was measured for polycrystalline molybdenum mirror, but not for the single crystal. Thus, specular reflectivity of single crystal is significantly higher than of polycrystalline one. The most affected wavelength range is 250-1000 nm, no significant changes of reflectivity was noticed in the range 1000-2000 nm. No or negligible effect of erosion on polarization characteristics of mirrors was measured.
|
|
| 10. |
- Litnovsky, A., et al.
(författare)
-
Experimental investigations of castellated monoblock structures in TEXTOR
- 2005
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 337-39:1-3, s. 917-921
-
Tidskriftsartikel (refereegranskat)abstract
- To insure the thermo-mechanical durability of ITER it is planned to manufacture the castellated armour of the divertor i.e. to split the armour into cells [W. Daener et al., Fusion Eng. Des. 61T62 (2002) 61]. This will cause an increase of the surface area and may lead to carbon deposition and tritium accumulation in the gaps in between cells. To investigate the processes of deposition and fuel accumulation in gaps, a castellated test-limiter was exposed to the SOL plasma of TEXTOR. The geometry of castellation used was the same as proposed for the vertical divertor target in ITER [W. Daener et al., Fusion Eng. Des. 61T62 (2002) 61]. After exposure the limiter was investigated with various surface diagnostic techniques. Deposited layers containing carbon, hydrogen, deuterium and boron were found both on top plasma-facing surfaces and in the gaps. The amount of deuterium in the gaps was at least 30% of that found on the top surfaces.
|
|
| 11. |
- Wienhold, P., et al.
(författare)
-
Exposure of metal mirrors in the scrape-off layer of TEXTOR
- 2005
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 337-39:03-jan, s. 1116-1120
-
Tidskriftsartikel (refereegranskat)abstract
- Large molybdenum mirrors have been exposed in the SOL of TEXTOR in order to simulate conditions relevant for ITER optical components. Distortions of the reflectivity - increase as well as decrease - are found in the erosion and deposition dominated areas, respectively. The changes are most pronounced in the near UV and level off in the IR and can partly be attributed to observed surface changes. A novel periscope system was installed and mirrors exposed in a pilot experiment to simulate the transmission of light to distant sensors in ITER.
|
|
