| 1. |
- Gedefaw, Desta Antenehe, 1971, et al.
(författare)
-
Conjugated polymers with polar side chains in bulk heterojunction solar cell devices
- 2014
-
Ingår i: Polymer International. - : Wiley. - 1097-0126 .- 0959-8103. ; 63:1, s. 22-30
-
Tidskriftsartikel (refereegranskat)abstract
- Two polymers with polar side chains, namely poly[2,7-(9,9-dioctylfluorene)-alt-5,5-(5',8'-di-2-thienyl-(2',3'-bis(3''-(2-(2-methoxyethoxy)ethoxy)phenyl)quinoxaline))] (P1) and poly[2,7-(9,9-bis(2-(2-methoxyethoxy)ethyl)fluorene)-alt-5,5-(5',8'-di-2-thienyl-(2',3'-bis(3''-(2-(2-methoxyethoxy)-ethoxy)phenyl)quinoxaline))] (P2), were synthesized for solar cell application. A series of bulk heterojunction solar cells were systematically fabricated and characterized by varying the electron-acceptor materials, processing solvents and thickness of the active layer. The results show that P1, with a higher molecular weight and good film-forming properties, performed better. The best device showed an open circuit voltage of 0.87 V, a short circuit current of 6.81 mA cm(-2) and a power conversion efficiency of 2.74% with 1:4 polymer:[6,6]-phenyl-C71-butyric acid methyl ester (PCBM[70]) mixture using o-dichlorobenzene (o-DCB) as processing solvent. P2 on the other hand showed a poorer performance with chlorobenzene as processing solvent, but a much improved performance was obtained using o-DCB instead. Thus, an open circuit voltage of 0.80 V, short circuit current of 6.21 mA cm(-2) and an overall power conversion efficiency of 2.22% were recorded for a polymer:PCBM[70] mixing ratio of 1:4. This is presumably due to the improvement of the morphology of the active layer using o-DCB as processing solvent. (c) 2013 Society of Chemical Industry
|
|
| 2. |
- Gedefaw, Desta Antenehe, 1971, et al.
(författare)
-
Random polyfluorene co-polymers designed for a better optical absorption coverage of the visible region of the electromagnetic spectrum
- 2014
-
Ingår i: Bulletin of the Chemical Society of Ethiopia. - : African Journals Online (AJOL). - 1726-801X .- 1011-3924. ; 28:1, s. 121-130
-
Tidskriftsartikel (refereegranskat)abstract
- Two alternating polyfluorenes (APFO15-F8BT and APFO3-F8BT) with full absorption of the visible region of the electromagnetic radiation were designed and synthesized for bulk-heterojunction solar cell devices. The optical and electrochemical properties of the two polymers were studied. The two polymers exhibited strong absorption in the visible region with no significant valley over the visible region extending up to 650 nm. Deep HOMO and ideally situated LUMO energy levels were the characteristics of the two polymers as revealed from the square wave voltammogram study: desired properties for extracting high open circuit voltage and for a facile charge transfer to the acceptor component in devices to take place, respectively. Photovoltaic devices were fabricated by blending the two polymers with PCBM[70] and up to similar to 2% power conversion efficiency were obtained.
|
|
| 3. |
- Ma, Zaifei, et al.
(författare)
-
A Facile Method to Enhance Photovoltaic Performance of Benzodithiophene-Isoindigo Polymers by Inserting Bithiophene Spacer
- 2014
-
Ingår i: Advanced Energy Materials. - : Wiley. - 1614-6840 .- 1614-6832. ; 4:6, s. Art. no. 1301455-
-
Tidskriftsartikel (refereegranskat)abstract
- This study describes the synthesis and characterization of four polymers based on benzo[1,2-b:4,5-b']dithiophene (BDT) and isoindigo with zero, one, two, and three thiophene spacer groups. Results have demonstrated that the use of bithiophene as a spacer unit improves the geometry of the polymer chain, making it planar, and hence, potentially enhanced π- π stacking occurs. Due to favorable interaction of the polymer chains, enhanced absorption coefficient, and optimal morphology, PBDT-BTI, which possesses bithiophene as a spacer, revealed high current and fill factor leading to a power conversion efficiency of 7.3% in devices, making this polymer the best performing isoindigo-based material in polymer solar cells (PSCs). Also, PBDT-BTI could still maintain efficiency of over 6% with the active layer thickness of 270 nm, making it a potential candidate for a material in printed PSCs. These results demonstrate that the use of thiophene spacers in D-A polymers could be an important design strategy to produce high-performance PSCs.
|
|
| 4. |
- Wang, Ergang, 1981, et al.
(författare)
-
Small Band Gap Polymers Synthesized via a Modified Nitration of 4,7-Dibromo-2,1,3-benzothiadiazole
- 2010
-
Ingår i: Organic Letters. - : American Chemical Society (ACS). - 1523-7052 .- 1523-7060. ; 12:20, s. 4470-4473
-
Tidskriftsartikel (refereegranskat)abstract
- The nitration of 4,7-dibromo-2,1,3-benzothiadiazole was modified by using CF3SO3H and HNO3 as the nitrating agent, and the related yield was improved greatly. On the basis of this improvement, two new small band gap polymers, P1TPQ and P3TPQ, were developed. Bulk heterojunction solar cells based on P3TPO and [6,6]-phenyl-C-71-butyric acid methyl ester exhibit interesting results with a power conversion efficiency of 21% and photoresponse up to 1.1 mu m
|
|
| 5. |
- Zhou, Yi, et al.
(författare)
-
Black Polymers in Bulk-Heterojunction Solar Cells
- 2010
-
Ingår i: IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS. - : Institute of Electrical and Electronics Engineers (IEEE). - 1077-260X .- 1558-4542. ; 16:6, s. 1565-1572
-
Tidskriftsartikel (refereegranskat)abstract
- The active materials in polymer solar cells have a decisive role on the performance of the cells. Polymers with extended absorption, i.e., black polymers with absorption covering the whole visible region are desired in order to capture the important parts of the solar irradiation. Different ways of achieving black active materials are discussed and two new alternating polyfluorene (APFO) copolymers with broad absorption, APFO-Black 1 and APFO-Black 2, using two different design strategies are described. The UV-Vis absorption spectra of the polymers extend to approximately 850 nm, and the polymers were used as donors and [6,6]-phenyl-C-61-butyric acid methyl ester (PCBM)[60] or PCBM[70] as acceptors in solar cell devices in various mixing ratios. The best combinations yielded an overall power conversion efficiency of 1.2% for APFO-Black 1 and 1.5% for APFO-Black 2.
|
|
