| 1. |
- Abate, E., et al.
(författare)
-
Combined performance tests before installation of the ATLAS Semiconductor and Transition Radiation Tracking Detectors
- 2008
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 3
-
Tidskriftsartikel (refereegranskat)abstract
- The ATLAS (A Toroidal LHC ApparatuS) Inner Detector provides charged particle tracking in the centre of the ATLAS experiment at the Large Hadron Collider (LHC). The Inner Detector consists of three subdetectors: the Pixel Detector, the Semiconductor Tracker (SCT), and the Transition Radiation Tracker (TRT). This paper summarizes the tests that were carried out at the final stage of SCT+TRT integration prior to their installation in ATLAS. The combined operation and performance of the SCT and TRT barrel and endcap detectors was investigated through a series of noise tests, and by recording the tracks of cosmic rays. This was a crucial test of hardware and software of the combined tracker detector systems. The results of noise and cross-talk tests on the SCT and TRT in their final assembled configuration, using final readout and supply hardware and software, are reported. The reconstruction and analysis of the recorded cosmic tracks allowed testing of the offline analysis chain and verification of basic tracker performance parameters, such as efficiency and spatial resolution, in combined operation before installation.
|
|
| 2. |
- Abdesselam, A., et al.
(författare)
-
Engineering for the ATLAS SemiConductor Tracker (SCT) end-cap
- 2008
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 3
-
Tidskriftsartikel (refereegranskat)abstract
- The ATLAS SemiConductor Tracker (SCT) is a silicon-strip tracking detector which forms part of the ATLAS inner detector. The SCT is designed to track charged particles produced in proton-proton collisions at the Large Hadron Collider (LHC) at CERN at an energy of 14 TeV. The tracker is made up of a central barrel and two identical end-caps. The barrel contains 2112 silicon modules, while each end-cap contains 988 modules. The overall tracking performance depends not only on the intrinsic measurement precision of the modules but also on the characteristics of the whole assembly, in particular, the stability and the total material budget. This paper describes the engineering design and construction of the SCT end-caps, which are required to support mechanically the silicon modules, supply services to them and provide a suitable environment within the inner detector. Critical engineering choices are highlighted and innovative solutions are presented - these will be of interest to other builders of large-scale tracking detectors. The SCT end-caps will be fully connected at the start of 2008. Further commissioning will continue, to be ready for proton-proton collision data in 2008.
|
|
| 3. |
- Abdesselam, A., et al.
(författare)
-
The ATLAS semiconductor tracker end-cap module
- 2007
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 575:3, s. 353-389
-
Tidskriftsartikel (refereegranskat)abstract
- The challenges for the tracking detector systems at the LHC are unprecedented in terms of the number of channels, the required read-out speed and the expected radiation levels. The ATLAS Semiconductor Tracker. (SCT) end-caps have a total of about 3 million electronics channels each reading out every 25 ns into its own on-chip 3.3 mu s buffer. The highest anticipated dose after 10 years operation is 1.4x10(14) cm(-2) in units of 1 MeV neutron equivalent (assuming the damage factors scale with the non-ionising energy loss). The forward tracker has 1976 double-sided modules, mostly of area similar to 70 cm(2), each having 2 x 768 strips read out by six ASICs per side. The requirement to achieve an average perpendicular radiation length of 1.5% X-0, while coping with up to 7 W dissipation per module (after irradiation), leads to stringent constraints on the thermal design. The additional requirement of 1500e(-) equivalent noise charge (ENC) rising to only 1800e(-) ENC after irradiation, provides stringent design constraints on both the high-density Cu/Polyimide flex read-out circuit and the ABCD3TA read-out ASICs. Finally, the accuracy of module assembly must not compromise the 16 mu m (r phi) resolution perpendicular to the strip directions or 580 mu m radial resolution coming from the 40 mrad front-back stereo angle. A total of 2210 modules were built to the tight tolerances and specifications required for the SCT. This was 234 more than the 1976 required and represents a yield of 93%. The component flow was at times tight, but the module production rate of 40-50 per week was maintained despite this. The distributed production was not found to be a major logistical problem and it allowed additional flexibility to take advantage of where the effort was available, including any spare capacity, for building the end-cap modules. The collaboration that produced the ATLAS SCT end-cap modules kept in close contact at all times so that the effects of shortages or stoppages at different sites could be rapidly resolved.
|
|
| 4. |
- Abdesselam, A., et al.
(författare)
-
The barrel modules of the ATLAS semiconductor tracker
- 2006
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 568:2, s. 642-671
-
Tidskriftsartikel (refereegranskat)abstract
- This paper describes the silicon microstrip modules in the barrel section of the SemiConductor Tracker (SCT) of the ATLAS experiment at the CERN Large Hadron Collider (LHC). The module requirements, components and assembly techniques are given, as well as first results of the module performance on the fully assembled barrels that make up the detector being installed in the ATLAS experiment.
|
|
| 5. |
- Wilson, J. A., et al.
(författare)
-
The optical links of the ATLAS SemiConductor tracker
- 2007
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 2, s. 1-28
-
Tidskriftsartikel (refereegranskat)abstract
- Optical links are used for the readout of the 4088 silicon microstrip modules that make up the SemiConductor Tracker of the ATLAS experiment at the CERN Large Hadron Collider (LHC). The optical link requirements are reviewed, with particular emphasis on the very demanding environment at the LHC. The on-detector components have to operate in high radiation levels for 10 years, with no maintenance, and there are very strict requirements on power consumption, material and space. A novel concept for the packaging of the on-detector optoelectronics has been developed to meet these requirements. The system architecture, including its redundancy features, is explained and the critical on-detector components are described. The results of the extensive Quality Assurance performed during all steps of the assembly are discussed.
|
|
| 6. |
- Lacour, S., et al.
(författare)
-
The limb-darkened Arcturus : imaging with the IOTA/IONIC interferometer
- 2008
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 485:2, s. 561-570
-
Tidskriftsartikel (refereegranskat)abstract
- Aims. We undertook an H band interferometric examination of Arcturus, a star frequently used as a spatial and spectral calibrator. Methods. Using the IOTA 3 telescope interferometer, we performed spectro-interferometric observations (R approximate to 35) of Arcturus. Atmospheric models and prescriptions were fitted to the data to derive the brightness distribution of the photosphere. Image reconstruction was performed using two software algorithms: WISARD and MIRA. Results. An achromatic power law proved to be a good model of the brightness distribution, with a limb darkening compatible with the one derived from atmospheric model simulations using our mARCS model. A Rosseland diameter of 21.05 +/- 0.21 was derived, corresponding to an effective temperature of T-eff = 4295 +/- 26 K. No companion was detected from the closure phases, with an upper limit on the brightness ratio of 8 x 10(-4) at 1 AU. The dynamic range at such distance from the photosphere was established as 1.5 x 10(-4) (1 sigma rms). An upper limit of 1.7 x 10(-3) was also derived for the level of brightness asymmetries present in the photosphere.
|
|
| 7. |
- Lindblad-Toh, Kerstin, et al.
(författare)
-
Genome sequence, comparative analysis and haplotype structure of the domestic dog.
- 2005
-
Ingår i: Nature. - : Springer Science and Business Media LLC. - 1476-4687 .- 0028-0836. ; 438:7069, s. 803-19
-
Tidskriftsartikel (refereegranskat)abstract
- Here we report a high-quality draft genome sequence of the domestic dog (Canis familiaris), together with a dense map of single nucleotide polymorphisms (SNPs) across breeds. The dog is of particular interest because it provides important evolutionary information and because existing breeds show great phenotypic diversity for morphological, physiological and behavioural traits. We use sequence comparison with the primate and rodent lineages to shed light on the structure and evolution of genomes and genes. Notably, the majority of the most highly conserved non-coding sequences in mammalian genomes are clustered near a small subset of genes with important roles in development. Analysis of SNPs reveals long-range haplotypes across the entire dog genome, and defines the nature of genetic diversity within and across breeds. The current SNP map now makes it possible for genome-wide association studies to identify genes responsible for diseases and traits, with important consequences for human and companion animal health.
|
|
| 8. |
|
|
| 9. |
- Bohsung, J, et al.
(författare)
-
IMRT treatment planning - A comparative inter-system and intor-centre planning exercise of the ESTRO QUASIMODO group
- 2005
-
Ingår i: Radiotherapy and Oncology. - : Elsevier BV. - 1879-0887 .- 0167-8140. ; 76:3, s. 354-361
-
Tidskriftsartikel (refereegranskat)abstract
- Background and purpose: The purpose of this work was a comparison of realistic IMRT plans based on the same CT-image data set and a common predefined set of dose objectives for the planning target volume and the organs at risk. This work was part of the larger European QUASIMODO IMRT verification project. Materials and methods: Eleven IMRT. plans were produced by nine different European groups, each applying a representative set of. clinically used IMRT treatment planning systems. The plans produced were to be deliverable in a clinically acceptable treatment time with the local technical equipment. All plans were characterized using a set of different quality measures such as dose-volume histograms, number of monitor units and treatment time. Results: Only one plan was able to fulfil all dose objectives strictly; six plans failed some of the objectives but were still considered to be clinically acceptable; four plans were not able to reach the objectives. Additional quality scores such as the number of monitor units and treatment time showed large variations, which mainly depend on the delivery technique. Conclusion: The presented planning study showed that with nearly all presently available IMRT planning and delivery systems comparable dose distributions could be achieved if the planning goals are clearly defined in advance.
|
|
| 10. |
- Eklof, Bo G., et al.
(författare)
-
Revised CEAP classification for chronic verrous disorders
- 2005
-
Ingår i: Phlebologie. - 0939-978X. ; 34:4, s. 220-225
-
Tidskriftsartikel (refereegranskat)abstract
- The CEAP classification for chronic venous disorders (CVD) was developed in 1994 by an international ad hoc committee of the American Venous Forum, endorsed by the Society for Vascular Surgery, and incorporated into "Reporting Standards in Venous Disease" in 1995. Today most published clinical papers use all or portions of CEAP. Rather than have it stand as a static classification system, an ad hoc committee of the American Venous Forum, working with an international liaison committee, has recommended a number of practical changes, detailed in this consensus report. These include refinement of several definitions used in describing CVD; refinement of the C classes of CEAP, addition of the descriptor n (no venous abnormality identified); elaboration of the date of classification and level of investigation; and as a simpler alternative to the full (advanced) CEAP classification, introduction of a basic CEAP version. It is important to stress that CEAP is a descriptive classification, whereas venous severity scoring and quality of life scores are instruments for longitudinal research to assess outcomes.
|
|
| 11. |
|
|
| 12. |
|
|
| 13. |
- Vouriot, Alexandre, et al.
(författare)
-
Long-term exposure to solvents impairs vigilance and postural control in serigraphy workers
- 2005
-
Ingår i: International Archives of Occupational and Environmental Health. - : Springer Science and Business Media LLC. - 0340-0131 .- 1432-1246. ; 78:6, s. 510-515
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives: To investigate the effects of solvent exposure (mainly aromatic hydrocarbons) on central regulation of vigilance and postural control, particularly in occasional difficult situations that provide sensorial conflicts. Methods: Twenty-two workers occupationally exposed to solvents for an average of approximately 6 years and 21 controls were compared by the use of a questionnaire on their state of vigilance and quality of sleep and on performance measurements of postural control under six different sensorimotor conditions. Their current median exposure levels to aromatic hydrocarbons was 80.1 mg/m3. Results: Exposed workers reported reduced alertness but not disturbance of sleep quality compared with controls. Moreover, they had the worst postural performance in all sensory conditions and demonstrated a reduced ability to resolve sensory conflict situations. The precision of stance was clearly affected by solvent exposure in contrast with energy consumption required to regulate proper balance control. Conclusions: The depressive effect of aromatic hydrocarbon exposure on cortical and subcortical structures controlling vigilance and postural stability could lead to increased risk of occupational accident, especially due to falls. The detection of central neurotoxic effects by posturographic and vigilance tests could be useful in preventive strategies. © Springer-Verlag 2005.
|
|
