| 1. |
- Stolen, Reidar, et al.
(author)
-
Solcelleteknologi og brannsikkerhet
- 2018
-
Reports (other academic/artistic)abstract
- Bruken av solcelleteknologi er i stor vekst i Norge. I denne studien er branntekniske utfordringer ved bruk av solcelleteknologi undersøkt, med hensyn på brannstart, brannspredning og brannslokking. Studien danner et kunnskapsgrunnlag for å ivareta brannsikkerheten under montering, drift og under slokkeinnsats, samt for å utforme et enhetlig og tydelig regelverk. Resultatene fra studien viser:Brannstart: Solcelleinstallasjoner inneholder mange koblingspunkt, som kan være potensielle tennkilder, og en liten mengde brennbare materialer. Dermed er det som trengs til stede for å starte en brann. Det er viktig at alle kontaktpunkter i solcelleinstallasjonen er robuste og tåler den påkjenningen de blir utsatt for gjennom sin levetid uten at det oppstår dårlig kontakt som kan føre til brann.Brannspredning: For utenpåmonterte solcellemoduler er det ofte en åpen luftspalte mellom modul og bygning. Dersom det er en brann i denne luftspalten, vil varmen kunne bli akkumulert, noe som kan føre til raskere og større brannspredning enn om bygningsoverflaten ikke hadde vært tildekket. I fullskalaforsøk med solcellemoduler montert på tak spredte brannen seg under hele arealet som var dekket av moduler, men stoppet da den nærmet seg kanten av dette arealet. Dette illustrerer viktigheten av at områder med solceller utenpå en bygning blir seksjonert for å unngå brannspredning. Eventuelt kan det benyttes mindre brennbare materialer på taket under solcellemodulene for å motvirke den økte varmepåkjenningen som solcellemodulene gir. Luftspalten mellom modul og bygning kan potensielt også gi endringer i luftstrømningen langs bygget, som igjen kan påvirke brannspredningen.Brannslokking: Brannvesenet har behov for informasjon om det er solcelleinstallasjon i bygget og hvilke deler av det elektriske anlegget som kan være spenningssatt. Under slokkeinnsats må brannvesenet ta hensyn til berøringsfare, og fare for at det kan oppstå lysbuer og andre feil som kan føre til nye antennelsespunkt. Ferskvann kan brukes som slokkemiddel, dette må spyles fra minimum 1 meters avstand med spredt stråle og minimum 5 meters avstand med samlet stråle. Solcellemoduler kan komplisere brannslokking ved at de danner en fysisk barriere mellom brannvesenet og brannen, samt fordi det må tas hensyn til plassering av spenningssatte komponenter. Når disse punktene er tatt høyde for, bør ikke utenpåmonterte solcelleinstallasjoner være et problem.Videre arbeid: For utenpåmonterte solcelleinstallasjoner, er det lite forskning på vertikal montering (på fasader), og hvordan en eventuell endret branndynamikk kan påvirke brannspredning og slokking. Videre er det i dag økende bruk av bygningsintegrerte solcelleinstallasjoner, noe som gir mange mulige nye utfordringer for brannsikkerheten og for regelverk, ettersom solcellen da er en del av bygningskroppen, samtidig som den er en elektrisk komponent. Tysk statistikk tyder på at brannrisiko for slike installasjoner kan være større enn for utenpåmonterte solcelleinstallasjoner, og dette vil det derfor være viktig å undersøke nærmere.
|
|
| 2. |
- Amundin, Mats, et al.
(author)
-
A proposal to use distributional models to analyse dolphin vocalisation
- 2017
-
In: Proceedings of the 1st International Workshop on Vocal Interactivity in-and-between Humans, Animals and Robots, VIHAR 2017. - 9782956202905 ; , s. 31-32
-
Conference paper (peer-reviewed)abstract
- This paper gives a brief introduction to the starting points of an experimental project to study dolphin communicative behaviour using distributional semantics, with methods implemented for the large scale study of human language.
|
|
| 3. |
- Chen, Zhe, et al.
(author)
-
Nano-scale characterization of white layer in broached Inconel 718
- 2017
-
In: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. - Amsterdam : Elsevier BV. - 0921-5093 .- 1873-4936. ; 684, s. 373-384
-
Journal article (peer-reviewed)abstract
- The formation mechanism of white layers during broaching and their mechanical properties are not well investigated and understood to date. In the present study, multiple advanced characterization techniques with nano-scale resolution, including transmission electron microscopy (TEM), transmission Kikuchi diffraction (TKD), atom probe tomography (APT) as well as nano-indentation, have been used to systematically examine the microstructural evolution and corresponding mechanical properties of a surface white layer formed when broaching the nickel-based superalloy Inconel 718.TEM observations showed that the broached white layer consists of nano-sized grains, mostly in the range of 20–50 nm. The crystallographic texture detected by TKD further revealed that the refined microstructure is primarily caused by strong shear deformation. Co-located Al-rich and Nb-rich fine clusters have been identified by APT, which are most likely to be γ′ and γ′′ clusters in a form of co-precipitates, where the clusters showed elongated and aligned appearance associated with the severe shearing history. The microstructural characteristics and crystallography of the broached white layer suggest that it was essentially formed by adiabatic shear localization in which the dominant metallurgical process is rotational dynamic recrystallization based on mechanically-driven subgrain rotations. The grain refinement within the white layer led to an increase of the surface nano-hardness by 14% and a reduction in elastic modulus by nearly 10% compared to that of the bulk material. This is primarily due to the greatly increased volume fraction of grain boundaries, when the grain size was reduced down to the nanoscale.
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Schötz, Susanne, et al.
(author)
-
Phonetic Characteristics of Domestic Cat Vocalisations
- 2017
-
In: Proceedings of the 1st International Workshop on Vocal Interactivity in-and-between Humans, Animals and Robots, VIHAR 2017. - 9782956202905 ; , s. 5-6
-
Conference paper (peer-reviewed)abstract
- The cat (Felis catus, Linneaus 1758) has lived around or with humans for at least 10,000 years, and is now one of the most popular pets of the world with more than 600 millionindividuals. Domestic cats have developed a more extensive, variable and complex vocal repertoire than most other members of the Carnivora, which may be explained by their social organisation, their nocturnal activity and the long period of association between mother and young. Still, we know surprisingly little about the phonetic characteristics of these sounds, and about the interaction between cats and humans.Members of the research project Melody in human–cat communication (Meowsic) investigate the prosodic characteristics of cat vocalisations as well as the communication between human and cat. The first step includes a categorisation of cat vocalisations. In the next step it will be investigated how humans perceive the vocal signals of domestic cats. This paper presents an outline of the project which has only recently started.
|
|
| 8. |
- Hosseini Bab Anari, Elham, 1982, et al.
(author)
-
Fluorine-free salts for aqueous lithium-ion and sodium-ion battery electrolytes
- 2016
-
In: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 6:88, s. 6, 85194-85201
-
Journal article (peer-reviewed)abstract
- A first generation of fluorine-free lithium and sodium salts based on the concept of pseudo-delocalized anions has been synthesized with both high purity and yield using water as the solvent in the reaction medium. The salts have been fully characterized by Raman and FT-IR spectroscopies, thermogravimetry, and X-ray crystallography to reveal both basic properties in terms of thermal stability and solubility as well as the local, mainly ion–ion interaction dictated, coordination details and by ionic conductivity and electrochemical stability window measurements as aqueous electrolytes. Together a picture is created of the salts' promise as components in electrolytes – primarily aiming at application in low voltage fluorinefree aqueous lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs).
|
|
| 9. |
-
INNOTRACK: Concluding technical report
- 2010
-
Editorial collection (peer-reviewed)abstract
- The track structure, rails, switches and crossings account for more than 50% of maintenance and renewal costs for the rail industry. To improve the competitiveness of rail transportation, the cost-efficiency of these areas needs to be addressed.This the background to INNOTRACK, an integrated research project funded by the European Commission’s 6th research framework pro- gramme. Running from September 2006 to December 2009, INN- OTRACK has developed a multitude of innovative solutions in the areas of track substructure, rails & welds, and switches & crossings. The solutions have been assessed from technical, logistics and life cycle cost point of views.This Concluding Technical Report of INNOTRACK includes an overview of the project. It further details implementable results, and clusters them into ”highlight” areas. In addition, the book acts as a ”key” to the vast amount of information from INNOTRACK: All sections refer to project reports where more information can be found.
|
|
| 10. |
- Stylidis, Kostas, 1978, et al.
(author)
-
Perceived quality framework in product generation engineering: an automotive industry example
- 2019
-
In: Design Science. - : Cambridge University Press (CUP). - 2053-4701 .- 2053-4701. ; 5
-
Journal article (peer-reviewed)abstract
- Perceived quality refers to customers’ cognitive and emotional responses to a particular design, often also associated with craftsmanship and customer satisfaction. Previous research defined a taxonomy of perceived quality and provided understanding about how engineering design decisions impact customer satisfaction. Furthermore, development of new products is frequently based on carrying over attributes of existing products, either from the same producer or from competitors. Previous research offered a new product development methodology combining variations of subsystems to carry over from existing products. This brief presents how these two lines of research combined to design the central console of the Porsche Panamera automobile and discusses the opportunities and challenges posed in the practical implementation of this research.
|
|
| 11. |
- Ribeiro, Luis, et al.
(author)
-
Industrial Agents for the Fast Deployment of Evolvable Assembly Systems
- 2015. - 1st ed.
-
In: Industrial Agents. - Amsterdam, Netherlands : Elsevier. - 9780128003411 ; , s. 301-321, s. 301-322
-
Book chapter (peer-reviewed)abstract
- The current manufacturing scenario is characterized by high market unpredictability. Agility is therefore a central challenge for modern companies that need to understand and be proactive towards their product offer in respect to “what is offered, when it is offered, where, how and by whom” (Brown & Bessant 2003).The “what” and the “when” are particularly relevant to the research in emerging paradigms as they account for variety, customization and volume; and timing, speed and seasonality (Brown & Bessant 2003).In this scenario, several design approaches and models have been proposed in the last decade to enable re-configurability and subsequently enhance the companies’ ability to adjust their offer in nature and time.From a paradigmatic point of view research has concentrated on the organizational structure of the shop-floor and the associated controls aspects. Concepts like Reconfigurable Manufacturing Systems (RMS) (Koren & Shpitalni 2010) and Fractal Factories (FF) (Montreuil 1999) support the physical construction of production systems by regulating their layout and making a few assumptions on their logical organization. On the other hand, concepts like Bionic Manufacturing Systems (BMS)(Ueda 1992), Holonic Manufacturing Systems (HMS)(Van Brussel et al. 1998), Evolvable Assembly Systems (Ribeiro et al. 2010) essentially provide the theoretical guidelines for the logical/computational organization of the system (see (Tharumarajah 1996) for a comparison between BMS, HMS and FF and (Setchi & Lagos 2004) for the rationale supporting the shift from Dedicated Lines to Flexible Manufacturing System and finally RMS).While these paradigms provide the conceptual framework and the main design guidelines their actual interpretation and implementation has led to a wider set of architectures (Monostori, Váncza & Kumara 2006; Leitão 2009; Parunak 2000; Pěchouček & Mařík 2008).These architectures align the high-level principles with the technological offer and limitations while seeking to address the re-configurability requirements of (Mehrabi, Ulsoy & Koren 2000; Rösiö & Säfsten 2013):module mobility – modules are easy and quick to move and install;“diagnosability” – it is quick to identify the sources of quality and reliability problems;“integrability” – modules are easy to integrate into the rest of the system.“convertibility” – it is easy and quick to switch between existing products and it is easy to adapt the system to future products;scalability – it is easy to enlarge and downsize the production system;“automatibility” – a dynamic level of automation is enabled;modularity – all system elements are designed to be modular;customization – the capability and flexibility of the production system is designed according to the products to be produced in the system.Instant deployment, as addressed in the present chapter directly addresses mobility, “integrability”, “convertibility”, scalability and customization. Mechatronic modularity is a prerequisite and is enforced by the proposed architecture and the considered modular design. “Diagnosability” was not specifically tackled.In this context, the chapter analyses the agent-based architecture related with the Instantly Deployable Evolvable Assembly System (IDEAS) project that is inspired by the Evolvable Assembly System (EAS) paradigm (Ribeiro et al. 2010) as a mechanism to enable fast deployment of mechatronic modules. EAS advocates the use of process-oriented modules and envisions the production system as a collection of processes and the associated interacting agents.The architecture and the related test cases are used to draw the main lessons learned in respect to technological and conceptual implications.In this context, the remainder of this text is organized as follows: section 1.1 discusses the main deployment challenges, section 1.2 details the reference architecture and associated concepts, section 1.3 presents the principal implementation decisions, section 1.4 features the main lessons learned, sections 1.5 discusses the benefits of the proposed approach and finally section 1.6 reflects on the main conclusions.
|
|
| 12. |
- Eivazihollagh, Alireza, et al.
(author)
-
On chelating surfactants : Molecular perspectives and application prospects
- 2019
-
In: Journal of Molecular Liquids. - : Elsevier BV. - 0167-7322 .- 1873-3166. ; 278, s. 688-705
-
Journal article (peer-reviewed)abstract
- Chelating agents, molecules that very strongly coordinates certain metal ions, are used industrially as well as in consumer products to minimize disturbances and increase performance of reactions and applications. The widely used sequestering agents, nitrilotriacetic acid (NTA), ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetic acid (DTPA) belong to this branch of readily water-soluble compounds. When these chemical structures also have hydrophobic parts, they are prone to adsorb at air-water interfaces and to self-assemble. Such bifunctional molecules can be called chelating surfactants and will have more extended utilization prospects than common chelating agents or ordinary ionic surfactants. The present review attempts to highlight the fundamental behavior of chelating surfactants in solution and at interfaces, and their very specific interactions with metal ions. Methods to recover chelating surfactants from metal chelates are also described. Moreover, utilization of chelating surfactants in applications for metal removal in environmental engineering and mineral processing, as well as for metal control in the fields of biology, chemistry and physics, is exemplified and discussed.
|
|
| 13. |
- Shafiq, ur Réhman, 1978-, et al.
(author)
-
Using Vibrotactile Language for Multimodal Human Animals Communication and Interaction
- 2014
-
In: Proceedings of the 2014 Workshops on Advances in Computer Entertainment Conference, ACE '14. - New York, NY, USA : Association for Computing Machinery (ACM). - 9781450333146 ; , s. 1:1-1:5
-
Conference paper (peer-reviewed)abstract
- In this work we aim to facilitate computer mediated multimodal communication and interaction between human and animal based on vibrotactile stimuli. To study and influence the behavior of animals, usually researchers use 2D/3D visual stimuli. However we use vibrotactile pattern based language which provides the opportunity to communicate and interact with animals. We have performed experiment with a vibrotactile based human-animal multimodal communication system to study the effectiveness of vibratory stimuli applied to the animal skin along with audio and visual stimuli. The preliminary results are encouraging and indicate that low-resolution tactual displays are effective in transmitting information.
|
|
| 14. |
- Nielsen, Stig Anton, 1981, et al.
(author)
-
Propositional Architecture using Induced Representation
- 2014
-
In: What’s the Matter? Materiality and Materialism at the Age of Computation. - 9789608932067 ; , s. 297-312
-
Conference paper (peer-reviewed)abstract
- The paper describes a method and an approach to using sensor data, machine-learning and pattern recognition for proposing and guiding immediate modifications to the existing built environment. The proposed method; Induced Representation, consists of a few steps which we have identified as crucial for such an approach. The steps are A: data collection from the environment, B: machine cognition, learning, prediction, and, c: proposition, visualization, and embodied representations for quick implementation. In the paper we outline the factual and theoretical basis for this approach, and we present and discuss three experiments that each deal with the steps A, B and C.
|
|
| 15. |
- Kurdve, Martin, et al.
(author)
-
Can Social Sustainability Values be Incorporated in a Product Service System for Temporary Public Building Modules?
- 2017
-
In: Procedia CIRP. - : Elsevier. - 2212-8271 .- 2212-8271. ; 64, s. 193-198
-
Journal article (peer-reviewed)abstract
- The temporary constructions industry has cost efficiency and sustainability challenges that may require new innovative business models as well as product and processes. This paperaims to discuss how social sustainability services can be included in product service system (PSS)by investigating a case where employment is offered in distributed temporary building module manufacturing in the PSS context. The case has been evaluated against PSS literature. Recent reviews and literature on inclusion of social sustainability and PSS for buildings were used. It is concluded that the current concept fits basic definitions of PSS although it is not typical. The social value of employment is difficult to evaluate and inclusion in PSS needs further research. Design practice could be used to further develop the services in the studied concept. © 2017 The Authors.
|
|
| 16. |
- Heshmati, Mohsen, 1987, et al.
(author)
-
Dependency of cohesive laws of a structural adhesive in Mode-I and Mode-II loading on moisture, freeze-thaw cycling, and their synergy
- 2017
-
In: Materials and Design. - : Elsevier BV. - 1873-4197 .- 0264-1275. ; 122, s. 433-447
-
Journal article (peer-reviewed)abstract
- In recent years, adhesive bonding has found its way to construction applications such as bridges. Given the harsh conditions that such structures are usually exposed to, it is necessary to account for environmental factors, particularly moisture and temperature, in the design phase. Cohesive zone modelling has attracted much attention in the last decade as a promising method to design adhesive joints. Despite this interest, the effects of moisture and thermal cycles on cohesive laws have not been investigated to the knowledge of the authors. In this paper, we present a method to directly measure the environmental-dependent cohesive laws of a structural adhesive loaded in pure Mode-I and Mode-II. Special consideration is given to overcome issues such as the time-consuming nature of moisture ingression and specimen dimensions, which could be problematic due to the size-limitations of conditioning equipment. The accuracy of this method was verified through simulation of the experiments using the finite element analysis. The effects of exposure to 95% relative humidity, immersion in saltwater and distilled water, and freeze-thaw cycles in the presence or absence of moisture were investigated. The results indicate the damaging effects of combined saltwater and freeze-thaw cycles which were clearly reflected on the shape of the cohesive laws.
|
|
| 17. |
- Decrop, Deborah, et al.
(author)
-
Single-step manufacturing of femtoliter microwell arrays in a novel surface energy mimicking polymer
- 2015
-
In: 18th International Conference on Solid-State Sensors, Actuators and Microsystems (IEEE TRANSDUCER 2015). - : IEEE.
-
Conference paper (peer-reviewed)abstract
- We report a novel polymer material formulation and stamp-molding technique that enable rapid single-step manufacturing of hydrophilic-in-hydrophobic microwell arrays. We developed a modified thiol-ene-epoxy polymer (mOSTE+) formulation that mimics the surface energy of its mold during polymerization. The polymer inherits the surface energy from the mold through molecular self-assembly, in which functional monomers self-assemble at the interface between the liquid prepolymer and the mold surface. Combining this novel mOSTE+ material with a stamp-molding process leads to simultaneous surface energy mimicking and micro-structuring. This method was used to manufacture microwells with hydrophilic bottom and hydrophobic sidewall, depressed in a surrounding hydrophobic surface. The microwell arrays were successfully tested for the self-assembly of 62’000 femtoliter-droplets. Such femtoliter droplet arrays are useful for, e.g., digital ELISA and single cell/molecule analysis applications.
|
|
| 18. |
- Pardon, Gaspard, 1983-
(author)
-
From Macro to Nano : Electrokinetic Transport and Surface Control
- 2014
-
Doctoral thesis (other academic/artistic)abstract
- Today, the growing and aging population, and the rise of new global threats on human health puts an increasing demand on the healthcare system and calls for preventive actions. To make existing medical treatments more efficient and widely accessible and to prevent the emergence of new threats such as drug-resistant bacteria, improved diagnostic technologies are needed. Potential solutions to address these medical challenges could come from the development of novel lab-on-chip (LoC) for point-of-care (PoC) diagnostics.At the same time, the increasing demand for sustainable energy calls for the development of novel approaches for energy conversion and storage systems (ECS), to which micro- and nanotechnologies could also contribute.This thesis has for objective to contribute to these developments and presents the results of interdisciplinary research at the crossing of three disciplines of physics and engineering: electrokinetic transport in fluids, manufacturing of micro- and nanofluidic systems, and surface control and modification. By combining knowledge from each of these disciplines, novel solutions and functionalities were developed at the macro-, micro- and nanoscale, towards applications in PoC diagnostics and ECS systems.At the macroscale, electrokinetic transport was applied to the development of a novel PoC sampler for the efficient capture of exhaled breath aerosol onto a microfluidic platform.At the microscale, several methods for polymer micromanufacturing and surface modification were developed. Using direct photolithography in off-stoichiometry thiol-ene (OSTE) polymers, a novel manufacturing method for mold-free rapid prototyping of microfluidic devices was developed. An investigation of the photolithography of OSTE polymers revealed that a novel photopatterning mechanism arises from the off-stoichiometric polymer formulation. Using photografting on OSTE surfaces, a novel surface modification method was developed for the photopatterning of the surface energy. Finally, a novel method was developed for single-step microstructuring and micropatterning of surface energy, using a molecular self-alignment process resulting in spontaneous mimicking, in the replica, of the surface energy of the mold.At the nanoscale, several solutions for the study of electrokinetic transport toward selective biofiltration and energy conversion were developed. A novel, comprehensive model was developed for electrostatic gating of the electrokinetic transport in nanofluidics. A novel method for the manufacturing of electrostatically-gated nanofluidic membranes was developed, using atomic layer deposition (ALD) in deep anodic alumina oxide (AAO) nanopores. Finally, a preliminary investigation of the nanopatterning of OSTE polymers was performed for the manufacturing of polymer nanofluidic devices.
|
|
| 19. |
|
|
| 20. |
- Jeong, Seung Hee, 1978-
(author)
-
Soft Intelligence : Liquids Matter in Compliant Microsystems
- 2016
-
Doctoral thesis (other academic/artistic)abstract
- Soft matter, here, liquids and polymers, have adaptability to a surrounding geometry. They intrinsically have advantageous characteristics from a mechanical perspective, such as flowing and wetting on surrounding surfaces, giving compliant, conformal and deformable behavior. From the behavior of soft matter for heterogeneous surfaces, compliant structures can be engineered as embedded liquid microstructures or patterned liquid microsystems for emerging compliant microsystems.Recently, skin electronics and soft robotics have been initiated as potential applications that can provide soft interfaces and interactions for a human-machine interface. To meet the design parameters, developing soft material engineering aimed at tuning material properties and smart processing techniques proper to them are to be highly encouraged. As promising candidates, Ga-based liquid alloys and silicone-based elastomers have been widely applied to proof-of-concept compliant structures.In this thesis, the liquid alloy was employed as a soft and stretchable electrical and thermal conductor (resistor), interconnect and filler in an elastomer structure. Printing-based liquid alloy patterning techniques have been developed with a batch-type, parallel processing scheme. As a simple solution, tape transfer masking was combined with a liquid alloy spraying technique, which provides robust processability. Silicone elastomers could be tunable for multi-functional building blocks by liquid or liquid-like soft solid inclusions. The liquid alloy and a polymer additive were introduced to the silicone elastomer by a simple mixing process. Heterogeneous material microstructures in elastomer networks successfully changed mechanical, thermal and surface properties.To realize a compliant microsystem, these ideas have in practice been useful in designing and fabricating soft and stretchable systems. Many different designs of the microsystems have been fabricated with the developed techniques and materials, and successfully evaluated under dynamic conditions. The compliant microsystems work as basic components to build up a whole system with soft materials and a processing technology for our emerging society.
|
|
| 21. |
- Paloranta, Jimmie, et al.
(author)
-
Interaction with a large sized augmented string instrument intended for a public setting
- 2016
-
In: Sound and Music Computing 2016. - Hamburg : Zentrum für Mikrotonale Musik und Multimediale Komposition (ZM4). - 9783000537004 ; , s. 388-395
-
Conference paper (peer-reviewed)abstract
- In this paper we present a study of the interaction with a large sized string instrument intended for a large installation in a museum, with focus on encouraging creativity,learning, and providing engaging user experiences. In the study, nine participants were video recorded while interacting with the string on their own, followed by an interview focusing on their experiences, creativity, and the functionality of the string. In line with previous research, our results highlight the importance of designing for different levels of engagement (exploration, experimentation, challenge). However, results additionally show that these levels need to consider the users age and musical background as these profoundly affect the way the user plays with and experiences the string.
|
|
| 22. |
- Ström, Henrik, 1981, et al.
(author)
-
Behaviour and stability of the two-fluid model for fine-scale simulations of bubbly flow in nuclear reactors
- 2015
-
In: International Journal of Chemical Reactor Engineering. - : Walter de Gruyter GmbH. - 1542-6580 .- 2194-5748. ; 13:4, s. 449-459
-
Journal article (peer-reviewed)abstract
- In the present work, we formulate a simplistic two-fluid model for bubbly steam-water flow existing between fuel pins in nuclear fuel assemblies. Numerical simulations are performed in periodic 2D domains of varying sizes. The appearance of a non-uniform volume fraction field in the form of meso-scales is investigated and shown to be varying with the bubble loading and the domain size, as well as with the numerical algorithm employed. These findings highlight the difficulties involved in interpreting the occurrence of instabilities in two-fluid simulations of gas-liquid flows, where physical and unphysical instabilities are prone to be confounded. The results obtained in this work therefore contribute to a rigorous foundation in on-going efforts to derive a consistent meso-scale formulation of the traditional two-fluid model for multiphase flows in nuclear reactors.
|
|
| 23. |
- Latupeirissa, Adrian Benigno, et al.
(author)
-
Sonic characteristics of robots in films
- 2019
-
In: Proceedings of the 16th Sound and Music Computing Conference. - Malaga, Spain. ; , s. 1-6
-
Conference paper (peer-reviewed)abstract
- Robots are increasingly becoming an integral part of our everyday life. Expectations on robots could be influenced by how robots are represented in science fiction films. We hypothesize that sonic interaction design for real-world robots may find inspiration from sound design of fictional robots. In this paper, we present an exploratory study focusing on sonic characteristics of robot sounds in films. We believe that findings from the current study could be of relevance for future robotic applications involving the communication of internal states through sounds, as well for sonification of expressive robot movements. Excerpts from five films were annotated and analysed using Long Time Average Spectrum (LTAS). As an overall observation, we found that robot sonic presence is highly related to the physical appearance of robots. Preliminary results show that most of the robots analysed in this study have “metallic” voice qualities, matching the material of their physical form. Characteristics of robot voices show significant differences compared to voices of human characters; fundamental frequency of robotic voices is either shifted to higher or lower values, and the voices span over a broader frequency band.
|
|
| 24. |
- Kersten, Anton, 1991, et al.
(author)
-
Inverter and Battery Drive Cycle Efficiency Comparisons of CHB and MMSP Traction Inverters for Electric Vehicles
- 2019
-
In: 2019 21st European Conference on Power Electronics and Applications, EPE 2019 ECCE Europe. ; , s. 1-12
-
Conference paper (peer-reviewed)abstract
- This paper investigates the performance of several inverter types for electric vehicles. A standard two-level and two seven-level multilevel inverters, a cascaded H-bridge (CHB) and a modular multilevel series parallel (MMSP) inverter, are considered. Based on the AC impedance spectra measured on a single battery cell, the battery pack impedances of the multilevel and two-level inverter systems are modeled. The inverter losses are modeled using the semiconductors’ datasheets. Based on the loss models, the inverter and battery efficiency during different driving cycles are assessed. In comparison to the two-level inverter system, the multilevel inverter drivetrains show an increased drivetrain efficiency, despite increased battery losses. The MMSP topology showed the best result. In comparison to the CHB topology, the battery losses were reduced by the MMSP inverter system.
|
|
| 25. |
- Wlazlak, Paraskeva, et al.
(author)
-
Original equipment manufacturer (OEM)-supplier integration to prepare for production ramp-up
- 2019
-
In: Journal of Manufacturing Technology Management. - : Emerald Group Publishing Limited. - 1741-038X .- 1758-7786. ; 30:2, s. 506-530
-
Journal article (peer-reviewed)abstract
- Purpose: Although prior research provides evidence that production ramp-up is often disrupted by supplier-related problems, it fails to discuss how the original equipment manufacturer (OEM) and various types of suppliers integrate their functions and operations to secure preparations for production ramp-up. The purpose of this paper is to investigate OEM–supplier integration in a new product development (NPD) project to prepare for production ramp-up.Design/methodology/approach: The results presented in this paper are based on a real-time, longitudinal study of a single collaborative NPD project in the mechanical engineering industry. The NPD project involves seven suppliers and it is carried out in a large Swedish company (the OEM) and fits the theory-elaborating approach of this research.Findings: This study argues that the aspect of timing in OEM–supplier integration, the OEM’s research and development (R&D) attitude toward collaboration and the OEM’s (R&D) operating procedure are challenges affecting the preparation for production ramp-up. The following three mechanisms to facilitate OEM–supplier integration in order to prepare for production ramp-up are also discussed: the mediator’s role, the OEM’s face-to-face meeting at the project level and suppliers’ formal face-to-face meetings with the OEM and internally.Originality/value: This paper elaborates on and extends prior research on production ramp-up by conducting an empirical analysis that incorporates supplier integration in NPD. It bridges the gap between the literature on production ramp-up and on supplier integration in NPD and clearly indicates that supplier integration is an important prerequisite for successful production ramp-up.
|
|
| 26. |
- Stylidis, Kostas, 1978, et al.
(author)
-
Perceived Quality Evaluation with the Use of Extended Reality
- 2019
-
In: Proceedings of the International Conference on Engineering Design, ICED. - : Cambridge University Press (CUP). - 2220-4334 .- 2220-4342. ; 1:1, s. 1993-2002
-
Conference paper (peer-reviewed)abstract
- If designers want to communicate quality aspects of the product, there is a need to bring these characteristics into the measurable space of perceived quality (PQ) attributes. To illustrate the solution for designers' dilemma of the “best design choice” in this study we applied the PQ attributes importance ranking (PQAIR) method, with the example of a bread toaster. We choose for evaluation three PQ attributes which can significantly influence visual quality of a product: Gap, Flush and Parallelism. We performed the experiment measuring subjective preferences over the toaster designs of two respondent's groups - “Designers” and “Customers.” We used sequentially: (i) web-survey (still images); (ii) desktop system; and (iii) fully immersive head-mounted display system (Virtual Reality). Consequently, we conducted a post-experiment survey regarding subjective preferences, related to the PQ communication channels that have been implemented during the study. Our results indicate advantages and drawbacks for each PQ communication method that we applied in this experiment and encourage further research in the area of products' perceived quality assessment.
|
|
| 27. |
-
Systems Perspectives on Biorefineries 2013
- 2013
-
Editorial collection (peer-reviewed)abstract
- Replacing fossil fuels with biomass for the production of energy carriers, materialsand specialty chemicals is a challenge that now confronts humanity. In whichapplications shall we use limited resources of biomass? How can biomass berefined into the products we want? What are the consequences of demanding toomuch? What is an optimal design of a biorefinery? Where should they be located?What policy instruments are required to realise the biorefineries of the future?There is not one final answer to these questions. However, different systems studiescan provide us with complementary pieces of the puzzle. These can be valuableby themselves, or be brought together into a larger and more complex picture.Systems Perspectives on Biorefineries 2013 is an updated edition of SystemsPerspectives on Biorefineries 2012 and contains twelve chapters that address differenttopics related to the immensely important issue of how the world’s biomassresources can, or should, be converted into the goods we need and desire. Thebook is still far from complete, but it is a contribution and a start...
|
|
| 28. |
- Wetterlund, Elisabeth, et al.
(author)
-
Implications of system expansion for the assessment of well-to-wheel CO2 emissions from biomass-based transportation
- 2010
-
In: International Journal of Energy Research. - : Hindawi Limited. - 0363-907X .- 1099-114X. ; 34:13, s. 1136-1154
-
Journal article (peer-reviewed)abstract
- In this paper we show the effects of expanding the system when evaluating well-to-wheel (WTW) CO2 emissions for biomass-based transportation, to include the systems surrounding the biomass conversion system. Four different cases are considered: DME via black liquor gasification (BLG), methanol via gasification of solid biomass, lignocellulosic ethanol and electricity from a biomass integrated gasification combined cycle (BIGCC) used in a battery-powered electric vehicle (BPEV). All four cases are considered with as well as without carbon capture and storage (CCS). System expansion is used consistently for all flows. The results are compared with results from a conventional WTW study that only uses system expansion for certain co-product flows. It is shown that when expanding the system, biomass-based transportation does not necessarily contribute to decreased CO2 emissions and the results from this study in general indicate considerably lower CO2 mitigation potential than do the results from the conventional study used for comparison. It is shown that of particular importance are assumptions regarding future biomass use, as by expanding the system, future competition for biomass feedstock can be taken into account by assuming an alternative biomass usage. Assumptions regarding other surrounding systems, such as the transportation and the electricity systems are also shown to be of significance. Of the four studied cases without CCS, BIGCC with the electricity used in a BPEV is the only case that consistently shows a potential for CO2 reduction when alternative use of biomass is considered. Inclusion of CCS is not a guarantee for achieving CO2 reduction, and in general the system effects are equivalent or larger than the effects of CCS. DME from BLG generally shows the highest CO2 emission reduction potential for the biofuel cases. However, neither of these options for biomass-based transportation can alone meet the needs of the transport sector. Therefore, a broader palette of solutions, including different production routes, different fuels and possibly also CCS, will be needed.
|
|
| 29. |
- Garrote Jurado, Ramon, et al.
(author)
-
Assisting engineering educators from developing countries with the design and implementation of online learning
- 2010
-
In: Joint International IGIP-SEFI Annual Conference 2010, Trnava, Slovakia, 19-22 September 2010.
-
Conference paper (peer-reviewed)abstract
- In this paper the authors report on a course that was given in Cuba in 2010. The funding for the course came from the European Union, within the ALFA III program. The project was called US0+I; Universidad, Sociedad e Innovación and its aim was to facilitate the exchange of educational methodology and pedagogy between the partner countries that made up the US0+I consortium. Within this project the University of Boras was assigned the task of giving the above mentioned course about the use of Learning Management Systems (LMS) in Higher Education. This paper describes the design and implementation of the course, with emphasis on how it was adapted to meet the needs of lecturers in a developing country. It also analyzes the results of research data that was collected during the duration of the course. The main aim of the research was to more clearly define key questions and issues in the area of cross cultural use of Information Communication Technology (ICT) as part of a larger action research project concerning ICT and cross cultural equity. The basic question that drives this research project is: What technical, social, economic and cultural differences affect the implementation of LMS in developed as compared to developing countries?
|
|
| 30. |
- Cano-Viktorsson, Carlos, 1977-
(author)
-
From Maps to Apps : Tracing the Organizational Responsiveness of an Early Multi-Modal Travel Planning Service
- 2015
-
In: The Journal of urban technology. - London : Taylor & Francis. - 1063-0732 .- 1466-1853. ; 22:4, s. 87-101
-
Journal article (peer-reviewed)abstract
- An Internet-based system for informing on multimodal travel planning (several modes of transportation) was introduced in Stockholm, Sweden in October 2000 in the form of a web page called trafiken.nu. The web page has a historical value of being one of the first attempts in Europe, and possibly the world, at providing an ICT-based travel planning service geared towards facilitating sustainable travel to the general public. The aim of this article is to investigate the historical development of trafiken.nu in order to draw lessons on how to better provide for a public information service with a potential for facilitating sustainable travel planning. Findings from the study of trafiken.nu suggest that the organizations behind the service have been slow in adapting to shifting media technology practices on how to provide for information which has affected the uptake of the service. Lessons from the case study provide a basis for arguing that organizations attempting to implement public information services would benefit from finding a means of harnessing collective intelligence in order to provide for a more customizable and responsive service to the general public.
|
|
| 31. |
- Andersson, Anders-Petter, 1969-, et al.
(author)
-
Designing empowering vocal and tangible interaction :
- 2013
-
In: The International conference on new interfaces for musical expression. - Kaejeon, Korea : Seoul National University. ; , s. 406-412
-
Conference paper (peer-reviewed)abstract
- Our voice and body are important parts of our self-experience, and our communication and relational possibilities. They gradually become more important for Interaction Design due to increased development of tangible interaction and mobile communication. In this paper we present and discuss our work with voice and tangible interaction in our ongoing research project RHYME. The goal is to improve health for families, adults and children with disabilities through use of collaborative, musical, tangible media. We build on the use of voice in Music Therapy and on a humanistic health approach. Our challenge is to design vocal and tangible interactive media that through use reduce isolation and passivity and increase empowerment for the users. We use sound recognition, generative sound synthesis, vibrations and cross-media techniques to create rhythms, melodies and harmonic chords to stimulate voice-body connections, positive emotions and structures for actions.
|
|
| 32. |
- Belitsky, Victor, 1955, et al.
(author)
-
Towards Multi-Pixel Heterodyne Terahertz Receivers
- 2011
-
In: Proceedings of the 22nd International Symposium on Space Terahertz Technology, Tucson, AZ, USA, April 26-28, 2011. ; , s. 1-3
-
Conference paper (peer-reviewed)abstract
- Terahertz multi-pixel heterodyne receivers introduce multiple challenges for their implementation, mostly due to the extremely small dimensions of all components and even smaller tolerances in terms of alignment, linear dimensions and waveguide component surface quality. In this manuscript, we present a concept of terahertz multi-pixel heterodyne receiver employing optical layout using polarization split between the LO and RF. The frontend is based on a waveguide balanced HEB mixer for the frequency band 1.6 – 2.0 THz. The balanced HEB mixer follows the layout of earlier demonstrated APEX T2 mixer. However for the mixer presented here, we implemented splitblock layout offering minimized lengths of all waveguides and thus reducing the associated RF loss. The micromachining methods employed for producing the mixer housing and the HEB mixer chip are very suitable for producing multiple structures and hence are in-line with requirements of multi-pixel receiver technology. The demonstrated relatively simple mounting of the mixer chip with self-aligning should greatly facilitate the integration of such multi-channel receiver.
|
|
| 33. |
- Bengtsson, Lars, 1963
(author)
-
Electrical Measurement Systems and Methods
- 2014
-
Book (other academic/artistic)abstract
- This book treats a wide range of aspects on electrical measurement systems and the methods used to acquire data from electronic systems. That includes sensors and sensor design, amplifiers such as differential and charge amplifiers, ADCs and DACs, digital oscilloscopes, cable theory and probes, noise and noise coupling, common and normal mode signals. This first part (chapters 1-8) doesn’t require any advanced mathematics and is aimed towards undergraduates. The second part (chapters 9-17) is on an advanced level (master level) and treats transform theory (Fourier, Laplace, z) and how to handle signals in frequency space. We cover the sampling theorem (Nyquist), resolution bandwidth, frequency spectrum distortions like aliasing and leakage and how to apply windows in a frequency spectrum. We also cover systems and signal processing in time-space, including convolution and correlation, filter theory and filter design (both analog and digital). The last chapters concern the statistical aspects on measurement systems and signals, like point and interval estimations, curve fitting and uncertainty estimations according to the GUM method.
|
|
| 34. |
- Ciccozzi, Federico, 1983-, et al.
(author)
-
Engineering the software of robotic systems
- 2017
-
In: Proceedings - 2017 IEEE/ACM 39th International Conference on Software Engineering Companion, ICSE-C 2017. - : IEEE. ; , s. 507-508
-
Conference paper (peer-reviewed)abstract
- The production of software for robotic systems is often case-specific, without fully following established engineering approaches. Systematic approaches, methods, models, and tools are pivotal for the creation of robotic systems for real-world applications and turn-key solutions. Well-defined (software) engineering approaches are considered the 'make or break' factor in the development of complex robotic systems. The shift towards well-defined engineering approaches will stimulate component supply-chains and significantly reshape the robotics marketplace. The goal of this technical briefing is to provide an overview on the state of the art and practice concerning solutions and open challenges in the engineering of software required to develop and manage robotic systems. Model-Driven Engineering (MDE) is discussed as a promising technology to raise the level of abstraction, promote reuse, facilitate integration, boost automation and promote early analysis in such a complex domain.
|
|
| 35. |
- Kersten, Anton, 1991, et al.
(author)
-
CM & Line-Dm Noise Separation for Three-Level NPC Inverter with Connected Neutral Point for Vehicle Traction Applications
- 2019
-
In: ITEC 2019 - 2019 IEEE Transportation Electrification Conference and Expo. ; June 2019, s. 1-6
-
Conference paper (peer-reviewed)abstract
- EMI standards limit the noise level for conducted disturbances on DC power cables of electric vehicles. However, designing the EMI filter requires the information about the CM and DM noise levels. Therefore, a separation of the noise is needed. This paper deals with the separation and quantification of the three-phase DM and CM noise for a three-level NPC inverter with a connected neutral point. A hardware separator, based on HF transformers was developed to separate the noise into CM and line-DM noise. The CM and line-DM noise of the NPC inverter was measured, when operating the inverter with a two-level and a three-level modulation. As expected, the CM noise is dominating, and it is shown that the three-level operation reduces the noise compared to the two-level operation by about 3 to 6 dB.
|
|
| 36. |
- Dochev, Dimitar Milkov, 1981, et al.
(author)
-
A Technology Demonstrator for 1.6–2.0 THz Waveguide HEB Receiver with a Novel Mixer Layout
- 2011
-
In: Journal of Infrared, Millimeter, and Terahertz Waves. - : Springer Science and Business Media LLC. - 1866-6892 .- 1866-6906. ; 32:4, s. 451-465
-
Journal article (peer-reviewed)abstract
- In this paper, we present our studies on a technology demonstrator for a balanced waveguide hot-electron bolometer (HEB) mixer operating in the 1.6–2.0 THz band. The design employs a novel layout for the HEB mixer combining several key technologies: all-metal THz waveguide micromachining, ultra-thin NbN film deposition and a micromachining of a silicon-on-insulator (SOI) substrate to manufacture the HEB mixer. In this paper, we present a novel mixer layout that greatly facilitates handling and mounting of the mixer chip via self-aligning as well as provides easy electrical interfacing. In our opinion, this opens up a real prospective for building multi-pixel waveguide THz receivers. Such receivers could be of interest for SOFIA, possible follow up of the Herschel HIFI, and even for ground based telescopes yet over limited periods of time with extremely dry weather (PWV less than 0.1 mm).
|
|
| 37. |
- Frid, Emma, et al.
(author)
-
Interactive sonification of a fluid dance movement : an exploratory study
- 2019
-
In: Journal on Multimodal User Interfaces. - : Springer. - 1783-7677 .- 1783-8738. ; 13:3, s. 181-189
-
Journal article (peer-reviewed)abstract
- In this paper we present three different experiments designed to explore sound properties associated with fluid movement: (1) an experiment in which participants adjusted parameters of a sonification model developed for a fluid dance movement, (2) a vocal sketching experiment in which participants sketched sounds portraying fluid versus nonfluid movements, and (3) a workshop in which participants discussed and selected fluid versus nonfluid sounds. Consistent findings from the three experiments indicated that sounds expressing fluidity generally occupy a lower register and has less high frequency content, as well as a lower bandwidth, than sounds expressing nonfluidity. The ideal sound to express fluidity is continuous, calm, slow, pitched, reminiscent of wind, water or an acoustic musical instrument. The ideal sound to express nonfluidity is harsh, non-continuous, abrupt, dissonant, conceptually associated with metal or wood, unhuman and robotic. Findings presented in this paper can be used as design guidelines for future applications in which the movement property fluidity is to be conveyed through sonification.
|
|
| 38. |
|
|
| 39. |
- Atashipour, Seyed Rasoul, et al.
(author)
-
On the Shear Buckling of Clamped Narrow Rectangular Orthotropic Plates
- 2015
-
In: Mathematical problems in engineering (Print). - : Hindawi Limited. - 1024-123X .- 1563-5147. ; 2015
-
Journal article (peer-reviewed)abstract
- This paper deals with stability analysis of clamped rectangular orthotropic thin plates subjected to uniformly distributed shear load around the edges. Due to the nature of this problem, it is impossible to present mathematically exact analytical solution for the governing differential equations. Consequently, all existing studies in the literature have been performed by means of different numerical approaches. Here, a closed-form approach is presented for simple and fast prediction of the critical buckling load of clamped narrow rectangular orthotropic thin plates. Next, a practical modification factor is proposed to extend the validity of the obtained results for a wide range of plate aspect ratios. To demonstrate the efficiency and reliability of the proposed closed-form formulas, an accurate computational code is developed based on the classical plate theory (CPT) by means of differential quadrature method (DQM) for comparison purposes. Moreover, several finite element (FE) simulations are performed via ANSYS software. It is shown that simplicity, high accuracy, and rapid prediction of the critical load for different values of the plate aspect ratio and for a wide range of effective geometric and mechanical parameters are the main advantages of the proposed closed-form formulas over other existing studies in the literature for the same problem.
|
|
| 40. |
- Kontopoulos, E., et al.
(author)
-
Deliverable 4.5: Context-aware Content Interpretation
- 2016
-
Reports (peer-reviewed)abstract
- The current deliverable summarises the work conducted within task T4.5 of WP4, presenting our proposed approaches for contextualised content interpretation, aimed at gaining insightful contextualised views on content semantics. This is achieved through the adoption of appropriate context-aware semantic models developed within the project, and via enriching the semantic descriptions with background knowledge, deriving thus higher level contextualised content interpretations that are closer to human perception and appraisal needs. More specifically, the main contributions of the deliverable are the following: A theoretical framework using physics as a metaphor to develop different models of evolving semantic content. A set of proof-of-concept models for semantic drifts due to field dynamics, introducing two methods to identify quantum-like (QL) patterns in evolving information searching behaviour, and a QL model akin to particle-wave duality for semantic content classification. Integration of two specific tools, Somoclu for drift detection and Ncpol2spda for entanglement detection. An “energetic” hypothesis accounting for contextualized evolving semantic structures over time. A proposed semantic interpretation framework, integrating (a) an ontological inference scheme based on Description Logics (DL), (b) a rule-based reasoning layer built on SPARQL Inference Notation (SPIN), (c) an uncertainty management framework based on non-monotonic logics. A novel scheme for contextualized reasoning on semantic drift, based on LRM dependencies and OWL’s punning mechanism. An implementation of SPIN rules for policy and ecosystem change management, with the adoption of LRM preconditions and impacts. Specific use case scenarios demonstrate the context under development and the efficiency of the approach. Respective open-source implementations and experimental results that validate all the above.All these contributions are tightly interlinked with the other PERICLES work packages: WP2 supplies the use cases and sample datasets for validating our proposed approaches, WP3 provides the models (LRM and Digital Ecosystem models) that form the basis for our semantic representations of content and context, WP5 provides the practical application of the technologies developed to preservation processes, while the tools and algorithms presented in this deliverable can be deployed in combination with test scenarios, which will be part of the WP6 test beds.
|
|
| 41. |
- Maronidis, A., et al.
(author)
-
PERICLES Deliverable 4.3: Content Semantics and Use Context Analysis Techniques
- 2016
-
Reports (peer-reviewed)abstract
- The current deliverable summarises the work conducted within task T4.3 of WP4, focusing on the extraction and the subsequent analysis of semantic information from digital content, which is imperative for its preservability. More specifically, the deliverable defines content semantic information from a visual and textual perspective, explains how this information can be exploited in long-term digital preservation and proposes novel approaches for extracting this information in a scalable manner. Additionally, the deliverable discusses novel techniques for retrieving and analysing the context of use of digital objects. Although this topic has not been extensively studied by existing literature, we believe use context is vital in augmenting the semantic information and maintaining the usability and preservability of the digital objects, as well as their ability to be accurately interpreted as initially intended.
|
|
| 42. |
- Augustian, Midhumol, et al.
(author)
-
EEG Analysis from Motor Imagery to Control a Forestry Crane
- 2018
-
In: Intelligent Human Systems Integration (IHSI 2018). - Cham : Springer. - 9783319738871 - 9783319738888 ; , s. 281-286
-
Conference paper (peer-reviewed)abstract
- Brain-computer interface (BCI) systems can provide people with ability to communicate and control real world systems using neural activities. Therefore, it makes sense to develop an assistive framework for command and control of a future robotic system which can assist the human robot collaboration. In this paper, we have employed electroencephalographic (EEG) signals recorded by electrodes placed over the scalp. The human-hand movement based motor imagery mentalization is used to collect brain signals over the motor cortex area. The collected µ-wave (8–13 Hz) EEG signals were analyzed with event-related desynchronization/synchronization (ERD/ERS) quantification to extract a threshold between hand grip and release movement and this information can be used to control forestry crane grasping and release functionality. The experiment was performed with four healthy persons to demonstrate the proof-of concept BCI system. From this study, it is demonstrated that the proposed method has potential to assist the manual operation of crane operators performing advanced task with heavy cognitive work load.
|
|
| 43. |
|
|
| 44. |
|
|
| 45. |
- Hansen, Kjetil Falkenberg, Docent, 1972-, et al.
(author)
-
Student involvement in sound and music computing research : Current practices at KTH and KMH
- 2019
-
In: Combined proceedings of the Nordic Sound and Music Computing Conference 2019 and the Interactive Sonification Workshop 2019. - Stockholm. ; , s. 36-42
-
Conference paper (peer-reviewed)abstract
- To engage students in and beyond course activities has been a working practice both at KTH Sound and Music Computing group and at KMH Royal College of Music since many years. This paper collects experiences of involving students in research conducted within the two institutions. We describe how students attending our courses are given the possibility to be involved in our research activities, and we argue that their involvement both contributes to develop new research and benefits the students in the short and long term. Among the assignments, activities, and tasks we offer in our education programs are pilot experiments, prototype development, public exhibitions, performing, composing, data collection, analysis challenges, and bachelor and master thesis projects that lead to academic publications.
|
|
| 46. |
- Bergman, Martin, 1985
(author)
-
Affective Surface Engineering for Product Design
- 2016
-
Licentiate thesis (other academic/artistic)abstract
- Design research, sensation and perception, hard metrology, emotional functions, semantics, surface roughness, product interaction, core values, total appearance… the list of scientific phrases never ends. Yet, what do they mean and how shall we use it when we are communicating with the industry and our end users? Is it possible to link the product experience to process parameters, put a number onto it? When you can measure spoken needs or even better, implied needs, of a product, and relate that data to the production, it is possible do create advanced products with high interaction stimuli. By joining engineering sciences (hard metrology) with design science (soft metrology) correlations between customer’s product experience (emotional functions) and surface properties (technical functions) can be established.The research briefly handles an optimization process where the framework from Kansei Engineering (KE) is used to evaluate the semantics issues primarily regarding materials and functional surfaces of products. The basic idea is that; the stakeholder’s experience shall be observed already at the phase of ideation in the product development process, which then facilitates the project (in regard to the total appearance) later on when a concept reaches the production stage. The results presented in this thesis are carried out through a number of case studies together with the industry. The main result and aim of the research is a developed robust approach that links emotional functions with technical functions, which in the next step facilitates the improvement of the total appearance of a product. Nevertheless, it should be recognized that research is not yet complete. It is an iterative process, which confirms that the loop of the method needs to be complete. The developed method is a toolbox with the fundamental tools and workshops to facilitate the correlation process mentioned above, however the packaging of the final step in the method is not yet complete. The future research outlook will focus on the “independent industry implementation” where the method is used by the industry by guidelines only, thus without researchers support.
|
|
| 47. |
- Salzer, Corinna, 1984, et al.
(author)
-
Innovation for Low-Rise Construction in the Urban Tropics: Utilization of Structural Bamboo for Cost-Efficient Housing
- 2015
-
In: 8th Conference of the International Forum on Urbanism (IFoU). - Basel, Switzerland : MDPI.
-
Conference paper (peer-reviewed)abstract
- This paper deals with a cost-efficient construction technology using load bearing bamboo for urban low-rise housing in tropical Asia-Pacific. The potential of the technology to be applied at larger scale is discussed at the example of the Philippines as pilot country for its application. The assessment of alternative construction methods such as this one is motivated by a tremendous need for more affordable, sustainable and resilient housing around the globe. The urban poor, being the most underserved group in need of housing, often cannot afford conventional building technologies offered by the formal industry. Using locally available bamboo as structural component within the introduced standardized and quality controlled construction method is an entry point to provide performing and safe housing at lower cost. The paper highlights, however, that cost-efficiency and technical performance are not the only requirements for innovations to succeed on a market, especially due to the complex challenge of urban poor housing. Through learnings from the construction of 50 houses in the Philippines and interviews with various stakeholders along the value chain of the technology, barriers and opportunities for a scale-up are retrieved. For this paper, a conflated none-exhaustive overview of the identified aspects is documented. It was found that both barriers and opportunities directly linked to this technology are closely tied to a complex local value chain which ranges from upstream supply of raw material to downstream customer acceptance. The pilot application has shown further, that participatory product development reduces the acceptance barrier significantly by directly addressing the needs of low income customers. Material and skills availability, enabling policies and approval by legal entities as well as sustainability in supply of the organic raw material play important roles too. This complex set of interlinked aspects needs to be addressed according to targets in implementation-pace, and -scale as well as its intended social value creation. While multi-stakeholder participation is required for a successful up-scaling, a facilitating social enterprise, providing knowledge and services around the technology, can guide through the up-scaling.
|
|
| 48. |
- Appelberg, Jonas, 1985-, et al.
(author)
-
Social media in the professional work of Polish, Russian and Swedish journalists
- 2014
-
In: Journal of Print and Media Technology Research. - Darmstadt : International Association of Research Organizations for the Information, Media and Graphic Arts Industrie (IARIGAI). - 2223-8905 .- 2414-6250. ; 3:2, s. 107-118
-
Journal article (peer-reviewed)abstract
- Professional journalistic culture is a complex of journalistic values, practices, norms and media products. On the one hand it tends to unification across the globe, but on the other hand these cultures varies according to cultural diversities. Technological development leads to a media convergence, increasing interactivity and plenty of opportunities for individualization of media content influence audience’s demands and consequently challenge of traditional routine of journalists’ work, affect professional practices and even undermine traditional role of a journalist in society. Social media creates new conditions for both actors: readers/viewers/listeners and for media professionals who use it as a tool for media work. Journalists in the different countries, however, use social media for professional needs not equally. This paper is discussing differences and similarities in the patterns of social media use by Polish, Russian and Swedish journalists. The research is based on a survey of 500 journalists in each country.
|
|
| 49. |
- Linnéusson, Gary, et al.
(author)
-
In Need for Better Maintenance Cost Modelling to Support the Partnership with Manufacturing
- 2016. - 1
-
In: Current Trends in Reliability, Availability, Maintainability and Safety. - Cham : Springer. - 9783319235967 - 9783319235974 ; , s. 263-282
-
Conference paper (other academic/artistic)abstract
- The problem of maintenance consequential costs has to be dealt with in manufacturing and is core of this paper. The need of sustainable partnership between manufacturing and maintenance is addressed. Stuck in a best practice thinking, applying negotiation as a method based on power statements in the service level agreement, the common best possible achievable goal is put on risk. Instead, it may enforce narrow minded sub optimized thinking even though not intended so. Unfortunately, the state of origin is not straightforward business. Present maintenance cost modelling is approached, however limits to its ability to address the dynamic complexity of production flows are acknowledged. The practical problem to deal with is units put together in production flows; in which downtime in any unit may or may not result in decreased throughput depending on its set up. In this environment accounting consequential costs is a conundrum and a way forward is suggested. One major aspect in the matter is the inevitable need of shift in mind, from perspective thinking in maintenance and manufacturing respectively towards shared perspectives, nourishing an advantageous sustainable partnership.
|
|
| 50. |
- Böhm, Annette, et al.
(author)
-
Evaluating CALM M5-based vehicle-to-vehicle communication in various road settings through field trials
- 2010
-
In: Proceedings - Conference on Local Computer Networks, LCN, (2010 12 01): 613-620. - Piscataway, N.J. : IEEE Press. - 9781424483877 ; , s. 613-620
-
Conference paper (peer-reviewed)abstract
- Future cooperative Intelligent Transport Systems (ITS) applications aimed to improve safety, efficiency and comfort on our roads put high demands on the underlying wireless communication system. To gain better understanding of the limitations of the 5.9 GHz frequency band and the set of communication protocols for medium range vehicle to vehicle (V2V) communication, a set of field trials with CALM M5 enabled prototypes has been conducted. This paper describes five different real vehicle traffic scenarios covering both urban and rural settings at varying vehicle speeds and under varying line-of-sight (LOS) conditions and discusses the connectivity (measured as Packet Reception Ratio) that could be achieved between the two test vehicles. Our measurements indicate a quite problematic LOS sensitivity that strongly influences the performance of V2V-based applications. We further discuss how the awareness of these context-based connectivity problems can be used to improve the design of possible future cooperative ITS safety applications.
|
|
