| 1. |
- Achilles, Silvio, et al.
(författare)
-
GPU-Accelerated Coupled Ptychographic Tomography
- 2022
-
Ingår i: Developments in X-Ray Tomography XIV. - : SPIE. - 0277-786X .- 1996-756X. - 9781510654686 ; 12242
-
Konferensbidrag (refereegranskat)abstract
- Scanning coherent X-ray microscopy (ptychography) has gained considerable interest during the last decade since the performance of this indirect imaging technique does not necessarily rely on the quality of the X-ray optics and, in principle, can achieve highest spatial resolution in X-ray imaging. The method can be easily extended to 3D by adding standard tomographic reconstruction schemes. However, the tomographic reconstruction is often applied in a subsequent step using a sequence of aligned ptychographic 2D projections. In this contribution, we outline current developments of a GPU-accelerated framework for direct 3D ptychography, coupling 2D ptychography and tomography. The program utilizes a custom GPU-accelerated framework for ptychography that offers three distinct ptychographic reconstruction algorithms. The tomographic reconstruction runs simultaneously and uses numerical routines of the ASTRA Toolbox. This parallel-computing approach results in a high performance increase considerably reducing the reconstruction time of 3D ptychographic datasets.
|
|
| 2. |
- Adler, Alexandre, et al.
(författare)
-
Modelling ground pickup for microwave telescopes
- 2022
-
Ingår i: Proceedings of SPIE, the International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 12190
-
Tidskriftsartikel (refereegranskat)abstract
- Microwave telescopes require an ever-increasing control of experimental systematics in their quest to measure the Cosmic Microwave Background (CMB) to exquisite levels of precision. One important systematic for ground and balloon-borne experiments is ground pickup, where beam sidelobes detect the thermal emission of the much warmer ground while the main beam is scanning the sky. This generates scan-synchronous noise in experiment timestreams, which is difficult to filter out without also deleting some of the signal from the sky. Therefore, efficient modelling of pickup can help guide the design of experiments and of analysis pipelines. In this work, we present an extension to the BEAMCONV algorithm that enables us to generate time-ordered data (TOD) from beam-convolved sky and ground maps simultaneously. We simulate ground pickup for both a ground-based experiment and a telescope attached to a stratospheric balloon. Ground templates for the balloon experiment are obtained by re-projecting satellite maps of the Earth's microwave emission.
|
|
| 3. |
- Auriacombe, Olivier, 1989, et al.
(författare)
-
Oil, water, and ice detection on road surfaces with a millimeter-wave radiometer
- 2020
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 11533
-
Konferensbidrag (refereegranskat)abstract
- Passive radiometers are well-known instruments used in the characterization of soil, sea surfaces and remote sensing of the earth atmosphere with satellites or airplanes. The instrument described in this article is a dual-polarised superheterodyne radiometer operating around 93 GHz. It is placed on a structure to measure road surface conditions (ice, water or oil) in a laboratory-controlled environment. This radiometer measures the reflected and emitted radiations from the road surface (asphalt and concrete) and the background temperature, in two orthogonal polarizations (H and V). The difference in the dielectric properties of the ice, oil and water from dry road surface allows to distinguish them efficiently. This kind of technique can be used for road surface recognition in all weather conditions and does not require presence of daylight or other sources of illumination. In this paper, calibration procedures and radiometric characterisations of the radiometer are studied in order to select the best and simpler method to operate the radiometer. It was found that calibrating the radiometer with only one blackbody target or using a table of gain and system noise temperature is sufficiently accurate over a long time to be able to distinguish dry from ice or water covered surfaces. The laboratory results are showing a high difference in the brightness temperature between road surface covered with ice, water or oil and the dry road surface. No ambiguities between those conditions exist but potential limitations could rise, for example if the road surface roughness changes during a measurement. Those promising results validate the potential of using radiometer for road safety and the automotive industry. The presented laboratory measurements are the first step towards the implementation of the instrument into a moving vehicle for alerting drivers ahead of unforeseen dangers. Downloading of the abstract is permitted for personal use only.
|
|
| 4. |
- Axelsson, Rebecca, et al.
(författare)
-
Simultaneous digital breast tomosynthesis and mechanical imaging in women recalled from screening - A preliminary analysis
- 2022
-
Ingår i: 16th International Workshop on Breast Imaging, IWBI 2022. - : SPIE. - 0277-786X .- 1996-756X. - 9781510655843 ; 12286
-
Konferensbidrag (refereegranskat)abstract
- We have developed a method for simultaneous tomosynthesis and mechanical imaging, called DBTMI. Mechanical imaging measures the stress distribution over the compressed breast surface. Malignant tissue is usually stiffer than benign, which results in higher stress on the compressed breast and enables to distinguish malignant from benign findings. By combining tomosynthesis and mechanical imaging, we could improve cancer detection accuracy by reducing the number of false positive findings. In this study we have analysed clinical DBTMI data, collected from 52 women from an ongoing pilot study at the Skåne University Hospital, Malmö, Sweden. We measured the range of the average stress over the breast surface, the range of average stress over the location of suspected lesions, and the normalized stress over the lesion location. Preliminary results show that the range of stress over the breast surface was 1.23-5.84 kPa, the range over the lesion location 2.10-10.10 kPa, and the normalized stress 1.12-2.44 over the lesion location. Overall, the local stress over malignant lesions was higher than the average stress over the entire breast surface. This is the first step investigating criteria to distinguish between malignant and benign findings based upon clinical DBTMI data.
|
|
| 5. |
- Bakic, Predrag R., et al.
(författare)
-
Evaluation of a flat fielding method for simultaneous DBT and MI acquisition
- 2020
-
Ingår i: 15th International Workshop on Breast Imaging, IWBI 2020. - : SPIE. - 1996-756X .- 0277-786X. - 9781510638310 ; 11513
-
Konferensbidrag (refereegranskat)abstract
- We are developing a prototype system for simultaneous digital breast tomosynthesis (DBT) and mechanical imaging (MI). MI maps the local pressure distribution during clinical exams, to distinguish breast abnormalities from the normal tissue. Both DBT alone, and MI when combined with digital mammography, have demonstrated the ability to reduce false positives; however, the benefit of combining DBT with MI has not been investigated. A practical limitation in simultaneous DBT and MI is the presence of the MI sensor in DBT images. Metallic elements of the sensor generate noticeable artifacts, which may interfere with clinical analysis. Previously, we shown that the sensor artifacts can be reduced by flat fielding, which combines projections of the sensor acquired with and without the breast. In this paper we evaluate the flat fielding by assessing artifact reduction and visibility of breast abnormalities. Images of a physical anthropomorphic breast phantom were acquired using a clinical wide-angle DBT system. Visual evaluation was performed by experienced medical physicists. Image quality descriptors were calculated in images with and without flat fielding. To evaluate the visibility of abnormalities we estimated the full width at half maximum (FWHM) for calcifications modeled in the phantom. Our preliminary results suggest a substantial reduction of artifacts by flat fielding (on average 83%). Few noticeable artifacts remain near the breast edge, in the reconstructed image with the sensor in focus. We observed a 17% reduction in the FWHM. Future work would include a detailed assessment, and method optimization using virtual trials as a design aid.
|
|
| 6. |
- Bejnö, Anna, et al.
(författare)
-
Artificial intelligence together with mechanical imaging in mammography
- 2020
-
Ingår i: 15th International Workshop on Breast Imaging, IWBI 2020. - : SPIE. - 0277-786X .- 1996-756X. - 9781510638310 ; 11513
-
Konferensbidrag (refereegranskat)abstract
- Artificial intelligence (AI) applications are increasingly seeing use in breast imaging, particularly to assist in or automate the reading of mammograms. Another novel technique is mechanical imaging (MI) which estimates the relative stiffness of suspicious breast abnormalities by measuring the distribution of pressure on the compressed breast. This study investigates the feasibility of combining AI and MI information in breast imaging to provide further diagnostic information. Forty-six women recalled from screening were included in the analysis. Mammograms with findings scored on a suspiciousness scale by an AI tool, and corresponding pressure distributions were collected for each woman. The cases were divided into three groups by diagnosis; biopsy-proven cancer, biopsy-proven benign and non-biopsied, very likely benign. For all three groups, the relative increase of pressure at the location of the finding marked most suspicious by the AI software was recorded. A significant correlation between the relative pressure increase at the AI finding and the AI score was established in the group with cancer (p=0.043), but neither group of healthy women showed such a correlation. This study suggests that AI and MI indicate independent markers for breast cancer. The combination of these two methods has the potential to increase the accuracy of mammography screening, but further research is needed.
|
|
| 7. |
- Bickham, S., et al.
(författare)
-
Low cutoff G.657-compatible fiber for data center interconnects operating in the 1064 and 1310 nm windows
- 2020
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 11286
-
Konferensbidrag (refereegranskat)abstract
- Optical interconnects in data centers have traditionally used 850 nm GaAs-based vertical-cavity surface-emitting lasers (VCSELs) in combination with multimode fiber, having a reach up to 100 m in length. Longer links typically use standard single-mode fiber in conjunction with either InP-based edge-emitting lasers or silicon photonic transmitters operating in the 1310 nm or 1550 nm window. Single-mode GaAs-based VCSELs operating at 1064 nm offer another path for achieving longer system reach. Potential advantages of these VCSELs include better power efficiency, modulation speeds reaching 50 Gbps and large-scale fabrication volumes. The longer wavelength is also beneficial due to the lower attenuation and chromatic dispersion of optical fibers at that wavelength. However, one practical issue for single-mode transmission is that the G.657 standard for single-mode fiber requires that the 22-meter cable cutoff wavelength be less than 1260 nm, and these fibers are typically few-moded at 1064 nm. The large differences between the group velocities of the LP01 and LP11 modes can lead to degradation of the system performance due to multi-path interference if the higher order modes are present. To resolve this quandary, we have designed and validated the performance of a new optical fiber which is single-moded at wavelengths less than 1064 nm, but also has G.657-compliant mode field diameter and dispersion characteristics that enable it to be used in the 1310 nm window.
|
|
| 8. |
- Boll, Måns, et al.
(författare)
-
Evaluation of 3D printed contrast detail phantoms for mammography quality assurance
- 2022
-
Ingår i: 16th International Workshop on Breast Imaging, IWBI 2022. - : SPIE. - 0277-786X .- 1996-756X. - 9781510655843 ; 12286
-
Konferensbidrag (refereegranskat)abstract
- Objects created by 3D printers are increasingly used in various medical applications. Today, affordable 3D printers, using Fused Deposition Modeling are widely available. In this project, a commercially available 3D printer was used to replicate a conventional radiographic contrast detail phantom. Printing materials were selected by comparing their x-ray attenuation properties. Two replicas were printed using polylactic acid, with different filling patterns. The printed phantoms were imaged by a clinical mammography system, using automatic exposure control. Phantom images were visually and quantitively compared to images of the corresponding conventional contrast detail phantom. Visual scoring of the contrast detail elements was performed by a medical physics student. Contrast-to-noise ratio (CNR) was calculated for each phantom element. The diameter and thickness of the smallest visible phantom object were 0.44 mm and 0.09 mm, respectively, for both filling patterns. For the conventional phantom, the diameter and thickness of the smallest visible object were 0.31 mm and 0.09 mm. Visual inspection of printed phantoms revealed some linear artefacts. These artefacts were however not visible on mammographic projections. Quantitively, average CNR of printed phantom objects followed the same trend with an increase of average CNR with increasing disk height. However, there is a limitation of detail objects with disk diameters below 1.25 mm, caused by the available nozzle size. Based upon the encouraging results, future work will explore the use of different materials and smaller nozzle diameters.
|
|
| 9. |
- Brucalassi, Anna, et al.
(författare)
-
A high resolution multi-object spectrograph for the VLT : a pre-concept design
- 2022
-
Ingår i: Ground-based and Airborne Instrumentation for Astronomy IX. - : SPIE. - 1996-756X .- 0277-786X. - 9781510653498 ; 12184
-
Konferensbidrag (refereegranskat)abstract
- Following the idea originally proposed during the ESO-Workshop The Very Large Telescope in 2030, the concept of a high resolution spectrograph for the VLT has been further explored, both for the science and technological aspects. Such an instrument will fill a gap in capabilities amongst the landscape of future instrumentation planned for the next decade. Its key characteristic will be high spectral resolution (R = 60000-80000) with multi-object (50-100) capabilities and, possibly, a stability that would provide high radial velocity precision (∼10m/s). In this work, we describe the science cases and driving science requirements for the instrument. Furthermore we will present some design solutions and technical options considered to meet these requirements.
|
|
| 10. |
- Callegari, Agnese, et al.
(författare)
-
Optical Trapping and Critical Casimir Forces
- 2023
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - 0277-786X .- 1996-756X. - 9781510663398
-
Konferensbidrag (refereegranskat)abstract
- Critical Casimir forces emerge between objects, such as colloidal particles, whenever their surfaces spatially confine the fluctuations of the order parameter of a critical liquid used as a solvent. These forces act at short but microscopically large distances between these objects, often reaching hundreds of nanometers. Keeping colloids at such distances is a major experimental challenge, which can be addressed by the means of optical tweezers. Here, we review how optical tweezers have been successfully used to quantitatively study critical Casimir forces acting on particles in suspensions. As we will see, the use of optical tweezers to experimentally study critical Casimir forces can play a crucial role in developing nanotechnologies, representing an innovative way to realize self-assembled devices at the nano- and microscale.
|
|
| 11. |
- Canzari, Matteo, et al.
(författare)
-
How Taranta provides tools to build user interfaces for TANGO devices in the SKA integration environment without writing a line of code
- 2022
-
Ingår i: Software and Cyberinfrastructure for Astronomy VII. - : SPIE. - 0277-786X .- 1996-756X. - 9781510653597 ; 12189
-
Konferensbidrag (refereegranskat)abstract
- Square Kilometer Array (SKA) is a project aimed to build the largest radio telescope in the world and it has just gotten into the construction phase. In this phase, the ability to develop and integrate software in an integration environment is crucial as it is the ability to visualize system-related information via a User Interface to rapidly verify the correctness of the system behavior and spot any anomaly. This is achieved by SKA teams thanks to the deployment of the Taranta suite in the integration environment. Taranta suite is a web-based toolset jointly developed by MAX IV Laboratory and the SKA that allows the fast development of graphical user interfaces connected to TANGO devices, based on a set of predefined widgets and a drag-and-drop mechanism and therefore without the need to write any additional code. In this paper, we present the Taranta general architecture and the main widgets currently available, we describe how the Taranta suite is deployed in the SKA integration environment and we explain the process used to collect feedback from the SKA community to define the roadmap for the future development of the tool.
|
|
| 12. |
- Canzari, Matteo, et al.
(författare)
-
Satisfying wishes for SKA engineers : How Taranta suite meets users' needs
- 2020
-
Ingår i: Software and Cyberinfrastructure for Astronomy VI. - : SPIE. - 1996-756X .- 0277-786X. - 9781510636910 ; 11452
-
Konferensbidrag (refereegranskat)abstract
- SKA Construction phase we are now in a transition phase that hopefully will prepare us for the next challenge: start building the SKA. One of the targets of this period is to evaluate the suitability of the Taranta (proper Webjive) Suite for creating engineering User Interfaces (UIs). The Taranta suite is a framework that allows the fast creation of web UIs that directly communicate with TANGO devices. What we need to address are the answers to questions such as: What kind of interface are you targeting? What are the performance constraints that you foresee? What are the current limitations of the tool that would make you choose a different one instead? What will the context of use be? What kind of features would you like the tool to have?
|
|
| 13. |
- Chang, Tsu-Chi, et al.
(författare)
-
GaN-based vertical-cavity surface-emitting laser incorporating a TiO2 high-index-contrast grating
- 2020
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 11280
-
Konferensbidrag (refereegranskat)abstract
- We demonstrate the first electrically injected GaN-based VCSEL with a TiO2 high-contrast grating (HCG) as the top mirror. The TiO2-HCG rested directly on the n-GaN without an airgap for mechanical stability. A VCSEL with an aperture diameter of 10 mu m had a threshold current of 25 mA under pulsed operation at room temperature. Multiple longitudinal modes coexist around 400 nm, each TM-polarized with a linewidth of 0.5 nm (spectral resolution limited). This first demonstration of a TiO2-HCG VCSEL offers a new route to achieve polarization pinning and could also allow additional benefits such as post-growth setting of resonance wavelength.
|
|
| 14. |
- Dahlblom, Victor, et al.
(författare)
-
Correspondence between areas causing recall in breast cancer screening and artificial intelligence findings
- 2022
-
Ingår i: 16th International Workshop on Breast Imaging, IWBI 2022. - : SPIE. - 0277-786X .- 1996-756X. - 9781510655843 ; 12286
-
Konferensbidrag (refereegranskat)abstract
- False positive recall is a major issue in breast cancer screening and the introduction of artificial intelligence (AI) might affect which women who are unnecessarily recalled. We have investigated how an AI system works on false positive recalls at screening and compared with radiologist findings. Two-view digital mammography (DM) examinations from 656 recalled women (136 with screening detected cancer), were analysed with a commercial AI system. The AI findings were matched with the areas on the images causing the recalls. The agreement was studied both at the examination level and for individual findings. Scores were compared between true positive and false positive recalls. ROC analysis was used to study the AI-system's ability to distinguish between true and false positive recalls. It was also studied how the AI system performed on cases where there were discordant readings. AI identified the same areas as radiologists in 80% of the cases recalled on DM. For true positives both the proportion of matching areas and AI scores were higher than for false positive recalls. The AI system also had a relatively large AUC (0.83) for differentiating between false positive recalls and cancers. Further, the AI system identified most of the findings leading to recall in cases where only one of the readers had marked the case for discussion. There is a relatively large agreement between the AI system and radiologists. The AI system scores the false positives lower than true positives. AI complements a single reader in a way similar to a second reader.
|
|
| 15. |
- Dahlblom, Victor, et al.
(författare)
-
Personalised breast cancer screening with selective addition of digital breast tomosynthesis through artificial intelligence
- 2020
-
Ingår i: 15th International Workshop on Breast Imaging, IWBI 2020. - : SPIE. - 0277-786X .- 1996-756X. - 9781510638310 ; 11513
-
Konferensbidrag (refereegranskat)abstract
- Breast cancer screening is predominantly performed using digital mammography (DM), but higher sensitivity has been demonstrated with digital breast tomosynthesis (DBT). A partial DBT screening in selected groups with a clear benefit from DBT might be more feasible than a full implementation, and using artificial intelligence (AI) to select women for DBT might be a possibility. This study used data from Malmö Breast Tomosynthesis Screening Trial, where all women prospectively were examined with separately read DM and DBT. We retrospectively analysed DM examinations (n=14768) with a breast cancer detection software and used the provided risk score (1-10) for risk stratification. We tested how different score thresholds for adding DBT to an initial DM affects the number of detected cancers, additional DBT examinations needed, detection rate, and false positives. If using a threshold of 9.0, 25 (26 %) more cancers would be detected compared to using DM alone. Of the 41 cancers only detected on DBT, 61 % would be detected, with only 1797 (12 %) of the women examined with both DM and DBT. The detection rate for the added DBT would be 14/1000 women, while the false positive recalls would be increased with 58 (21 %). Using DBT only for selected high gain cases could be an alternative to a complete DBT screening. AI could be used for analysing DM to identify high gain cases, where DBT can be added during the same visit. There might be logistical challenges and further studies in a prospective setting are necessary.
|
|
| 16. |
- Dustler, Magnus, et al.
(författare)
-
The effect of breast density on the performance of deep learning-based breast cancer detection methods for mammography
- 2020
-
Ingår i: 15th International Workshop on Breast Imaging, IWBI 2020. - : SPIE. - 1996-756X .- 0277-786X. - 9781510638310 ; 11513
-
Konferensbidrag (refereegranskat)abstract
- Mammographic sensitivity in breasts with higher density has been questioned. Higher breast density is also linked to an increased risk for breast cancer. Even though digital breast tomosynthesis (DBT) offers an attractive solution, for varied reasons it has not yet been widely adopted in screening. An alternative could be to boost the performance of standard mammography by using computer-aided detection based on deep learning, but it remains to be proven how such methods are affected by density. A deep-learning based computer-aided detection program was used to score the suspicion of cancer on a scale of 1 to 10. A set of 13838 mammography screening exams were used. All cases had BIRADS density values available. The set included 2304 exams (11 cancers) in BIRADS 1, 5310 (51 cancers) in BIRADS 2, 4844 (73 cancers) in BIRADS 3 and 1223 (22 cancers) in BIRADS 4. A Kruskal-Wallis analysis of variance showed no statistically significant differences between the cancer risk scores of the density categories for cases diagnosed with cancer (P=0.9225). An identical analysis for cases without cancer, showed significant differences between the density categories (P<0.0001). The results suggest that the risk categorization of the deep-learning software is not affected by density, as though some density categories receive higher risk assessments in general, this does not hold for cancer cases, which show uniformly high risk values despite density. This shows the potential for deep-learning to improve screening sensitivity even for women with high density breasts.
|
|
| 17. |
- Franceschet, C., et al.
(författare)
-
The optical bread-board models of the LiteBIRD Medium and High Frequency Telescope
- 2022
-
Ingår i: Proceedings of SPIE, the International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 12190
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper we discuss the modeling, development and testing of the optical bread-board models of the Medium and High Frequency Telescope (MHFT) onboard the LiteBIRD satellite. The future JAXA mission LiteBIRD will search for the signature of primordial gravitational waves through the measurement of the "B-modes"of the cosmic microwave background polarization. MHFT will observe the polarized microwave sky between 89 and 448 GHz by means of two refractive telescopes. The accurate knowledge of their optical properties is fundamental to assess the impact of systematic effects (e.g. beam deformation, side lobes and intensity to polarization leakage) on the future observations. To gain early experience with our test approach, and to provide hints of possible criticalities in the design and characterization of a MHFT-like refractive system, we developed two optical bread-board models. The BB1, a single dielectric lens coupled to a fully characterized W-band corrugated horn, allows us to assess the accuracy and potential limitations of different measurement methods and to verify the reliability of optical simulators in predicting refractive elements and systems, as compared to the precision required by LiteBIRD. The BB2, a 1a.,2-scaled version of the Medium Frequency Telescope, focuses on the modelling and issues of dual-lens coupling, while providing a test-bed to finalize the MHFT optical calibration plan for its higher levels of integration.
|
|
| 18. |
- Gallardo, P. A., et al.
(författare)
-
Optical design concept of the CMB-S4 large-Aperture telescopes and cameras
- 2022
-
Ingår i: Proceedings of SPIE, the International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 12190
-
Tidskriftsartikel (refereegranskat)abstract
- CMB-S4-the next-generation ground-based cosmic microwave background (CMB) experiment-will significantly advance the sensitivity of CMB measurements and improve our understanding of the origin and evolution of the universe. CMB-S4 will deploy large-Aperture telescopes fielding hundreds of thousands of detectors at millimeter wavelengths. We present the baseline optical design concept of the large-Aperture CMB-S4 telescopes, which consists of two optical configurations: (i) a new off-Axis, three-mirror, free-form anastigmatic design and (ii) the existing coma-corrected crossed-Dragone design. We also present an overview of the optical configuration of the array of silicon optics cameras that will populate the focal plane with 85 diffraction-limited optics tubes covering up to 9 degrees of field of view, up to 1.1 mm in wavelength. We describe the computational optimization methods that were put in place to implement the families of designs described here and give a brief update on the current status of the design effort.
|
|
| 19. |
- Gao, J. R., et al.
(författare)
-
5.3 THz MgB 2 hot electron bolometer mixer operated at 20 K
- 2022
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 12190
-
Konferensbidrag (refereegranskat)abstract
- Heterodyne receivers combining a NbN HEB mixer with a local oscillator (LO) are the work horse for high resolution (≥106) spectroscopic observations at supra-Terahertz frequencies. We report an MgB2 HEB mixer working at 5.3 THz with 20 K operation temperature based on a previously published paper [Y. Gan et al, Appl. Phys. Lett., 119, 202601 (2021)]. The HEB consists of a 7 nm thick MgB2 submicron-bridge contacted with a spiral antenna. It has a Tc of 38.4 K. By using hot/cold blackbody loads and a Mylar beam splitter all in vacuum, and applying a 5.25 THz FIR gas laser as the LO, we measured a minimal DSB receiver noise temperature of 3960 K. The latter gives a DSB mixer noise temperature of 1470 K. This sensitivity is 28 times better than a room temperature Schottky mixer at 4.7 THz, but about 2.5 times less sensitive than an NbN HEB mixer. The latter must be operated around 4 K. The IF noise bandwidth is about 10 GHz, which is 2.5-3 times larger than an NbN HEB. With further optimization, such MgB2 HEBs are expected to reach a better sensitivity. That the low noise, wide IF bandwidth MgB2 HEB mixers can be operated in a compact, low dissipation 20 K Stirling cooler can significantly reduce the cost and complexity of heterodyne instruments and therefore facilitate new space missions.
|
|
| 20. |
- Giordano, Pier Francesco, et al.
(författare)
-
Value of Information analysis accounting for data quality
- 2023
-
Ingår i: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2023. - 1996-756X .- 0277-786X. - 9781510660793 ; 12486
-
Konferensbidrag (refereegranskat)abstract
- Structural Health Monitoring (SHM) can provide valuable information for maintenance-related activities and post-disaster emergency management. However, as with any technological system, SHM systems can be susceptible to errors due to malfunctioning. Therefore, it is essential to assess the potential for malfunctions and the associated costs of maintenance and repair when evaluating the long-term benefits of SHM systems. In the last two decades, sensor validation tools (SVTs) have been proposed to support decisions by isolating and discarding abnormal data. Recently, the authors of this paper have proposed a framework based on the Value of Information (VoI) from Bayesian decision analysis to account for different states of an SHM system and assess the benefit of SVT information. By quantifying the additional value obtained from SVTs, decision-makers can make more informed decisions about investing in these systems. This framework is here demonstrated on a real case study, namely the S101 bridge in Austria, which has been artificially damaged for research purposes. The benefit of collecting SHM and SVT information is quantified by considering a simple decision problem related to the management of the bridge in the aftermath of a damaging event. Overall, the study highlights the potential benefits of using SVTs to improve the reliability of SHM data and inform decision-making in the management of structures.
|
|
| 21. |
- Haglund, Åsa, 1976, et al.
(författare)
-
Out of the blue: UV VCSELs
- 2022
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - 0277-786X .- 1996-756X. ; PC12001
-
Konferensbidrag (refereegranskat)abstract
- In recent years, there has been tremendous improvement in the performance of blue-emitting vertical-cavity surface-emitting lasers (VCSELs) and they are now on the cusp of commercialization. We will summarize state-of-the-art results and outline the main challenges in extending the emission wavelength into the ultraviolet (UV). Our method to simultaneously achieve high-reflectivity mirrors and good cavity length control by selective electrochemical etching has been essential to demonstrate the world’s first UV-B VCSEL. The use of dielectric mirrors, where one material has a negative thermo-optical coefficient, counteracts the inherent red-shift of the resonance wavelength, enabling a temperature-stable emission.
|
|
| 22. |
- Haglund, Åsa, 1976, et al.
(författare)
-
Thin-film UV VCSELs and LEDs by electrochemical etching
- 2022
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - 0277-786X .- 1996-756X. ; PC12022
-
Konferensbidrag (refereegranskat)abstract
- We will give an overview of state-of-the-art results and challenges to achieve high-performing III-nitride vertical-cavity surface-emitting lasers (VCSELs), with a particular focus on the requirements to push the emission wavelength into the ultraviolet (UV). Our method to simultaneously achieve high-reflectivity mirrors and good cavity length control by electrochemical etching enabled the world’s first UV-B VCSEL. The use of dielectric mirrors yielded lasers with a very temperature-stable emission wavelength thanks to the negative thermo-optic coefficient of the mirrors. We have used the same etch methodology to also lift-off fully processed LEDs from their growth substrate to improve the light extraction efficiency.
|
|
| 23. |
- Hey Tow, Kenny, et al.
(författare)
-
Monitoring mining induced seismicity using optical fibre sensors during mine exploitation
- 2023
-
Ingår i: Proc SPIE Int Soc Opt Eng. - : SPIE. - 1996-756X .- 0277-786X. - 9781510665002
-
Konferensbidrag (refereegranskat)abstract
- Fibre-optic based sensing technologies are becoming popular in the field of geophysics since enable long range and high spatial resolution acoustic measurements. In this work, we present preliminary results obtained using quasi-distributed Fibre-Bragg grating sensing and Distributed Acoustic Sensing (DAS) to monitor seismic activities in an operational underground mine. 12 FBGs and 800 metres of fiber optic cable was installed in the tunnel lining an operational mine and recorded mine seismicity such as production blasts and a small seismic activity of magnitude 1.41 in September 2022.
|
|
| 24. |
- Hjort, Filip, 1991, et al.
(författare)
-
Advances in ultraviolet-emitting vertical-cavity surface-emitting lasers
- 2021
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 11686
-
Konferensbidrag (refereegranskat)abstract
- We will give an overview of the progress in ultraviolet-emitting vertical-cavity surface-emitting lasers (VCSELs) and their potential applications in areas such as disinfection and medical therapy. This includes our demonstration of the shortest wavelength VCSEL, emitting at 310 nm under optical pumping, and a detailed analysis of its filamentary lasing characteristics. The UVB-emitting AlGaN-based VCSEL was realized by substrate removal using electrochemical etching, enabling the use of two high-reflectivity dielectric distributed Bragg reflectors. The potential of using this or alternative methods to push the emission to shorter wavelengths will be examined as well as concepts to realize electrically injected devices.
|
|
| 25. |
- Kaimre, Hans, 1996, et al.
(författare)
-
Effects of Detuning on Wide-Temperature Behavior of 25 Gbaud 850 nm VCSELs
- 2023
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 12439
-
Konferensbidrag (refereegranskat)abstract
- Emerging markets for optical interconnects with VCSEL-based transceivers require VCSELs with superior wide temperature performance. One of the prime parameters controlling the temperature dependence of VCSEL performance is wavelength detuning. We study the impact of detuning on the performance of 25 Gbaud class 850 nm VCSELs over a temperature range of -40 to 125°C, as applicable to e.g. automotive optical networking. Two VCSELs with different detuning, but otherwise identical, are compared. Basic static and dynamic performance parameters and their temperature dependencies are extracted. The results show that with appropriate detuning, sufficient performance at the temperature extremes and improved tolerance to temperature variations can be achieved. Excessive detuning to meet the more challenging high temperature performance requirements leads to insufficient low temperature performance.
|
|
| 26. |
- Kluska, J., et al.
(författare)
-
VLTI images of circumbinary disks around evolved stars
- 2020
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 11446
-
Konferensbidrag (refereegranskat)abstract
- The new generation of VLTI instruments (GRAVITY, MATISSE) aims to produce routinely interferometric images to uncover the morphological complexity of different objects at high angular resolution. Image reconstruction is, however, not a fully automated process. Here we focus on a specific science case, namely the complex circumbinary environments of a subset of evolved binaries, for which interferometric imaging provides the spatial resolution required to resolve the immediate circumbinary environment. Indeed, many binaries where the main star is in the post-asymptotic giant branch (post-AGB) phase are surrounded by circumbinary disks. Those disks were first inferred from the infrared excess produced by dust. Snapshot interferometric observations in the infrared confirmed disk-like morphology and revealed high spatial complexity of the emission that the use of geometrical models could not recover without being strongly biased. Arguably, the most convincing proof of the disk-like shape of the circumbinary environment came from the first interferometric image of such a system (IRAS08544-4431) using the PIONIER instrument at the VLTI. This image was obtained using the SPARCO image reconstruction approach that enables to subtract a model of a component of the image and reconstruct an image of its environment only. In the case of IRAS08544-4431, the model involved a binary and the image of the remaining signal revealed several unexpected features. Then, a second image revealed a different but also complex circumstellar morphology around HD101584 that was well studied by ALMA. To exploit the VLTI imaging capability to understand these targets, we started a large programme at the VLTI to image post-AGB binary systems using both PIONIER and GRAVITY instruments.
|
|
| 27. |
- Lashgari, Maryam, 1991, et al.
(författare)
-
Techno-economics of 5G transport deployments
- 2023
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 12429
-
Konferensbidrag (refereegranskat)abstract
- Network densification is a crucial enabler for 5G, requiring the installation of a large number of devices and/or cables for the 5G transport network. This invited paper provides a techno-economic study focusing on adopting microwave and fiber equipment for 5G transport network deployments. Different architectures for low layer split supporting latency critical services are considered.
|
|
| 28. |
- Lindgren, Erik, 1980, et al.
(författare)
-
Analysis of industrial X-ray computed tomography data with deep neural networks
- 2021
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 11840
-
Konferensbidrag (refereegranskat)abstract
- X-ray computed tomography (XCT) is increasingly utilized industrially at material- and process development as well as in non-destructive quality control; XCT is important to many emerging manufacturing technologies, for example metal additive manufacturing. These trends lead to increased needs of safe automatic or semi-automatic data interpretation, considered an open research question for many critical high value industrial products such as within the aerospace industry. By safe, we mean that the interpretation is not allowed to unawarely or unexpectedly fail; specifically the algorithms must react sensibly to inputs dissimilar to the training data, so called out-of-distribution (OOD) inputs. In this work we explore data interpretation with deep neural networks to address: robust safe data interpretation which includes a confidence estimate with respect to OOD data, an OOD detector; generation of realistic synthetic material aw indications for the material science and nondestructive evaluation community. We have focused on industrial XCT related challenges, addressing difficulties with spatially correlated X-ray quantum noise. Results are reported on training auto-encoders (AE) and generative adversarial networks (GAN), on a publicly available XCT dataset of additively manufactured metal. We demonstrate that adding modeled X-ray noise during training reduces artefacts in the generated imperfection indications as well as improves the OOD detector performance. In addition, we show that the OOD detector can detect real and synthetic OOD data and still model the accepted in-distribution data down to the X-ray noise levels.
|
|
| 29. |
- Lindgren, Erik, et al.
(författare)
-
Deep-learning-based out-of distribution data detection in visual inspection images
- 2023
-
Ingår i: Proceedings Of Spie 12489, NDE 4.0, Predictive Maintenance, Communication, and Energy Systems. - : Spie Digital Library. ; 12489
-
Konferensbidrag (refereegranskat)abstract
- Within quality critical industries, e.g. aerospace, quality control with non-destructive evaluation (NDE) is essential. The surface quality is often important and e.g. visual inspection is often applied. Part of the inspection is the data interpretation, not easily made automatic for critical products. Recent studies on the automatization have indicated promising results utilizing deep-learning-based artificial intelligence. However, many such algorithms are known to be overconfident when subjected to unexpected input (e.g. new/rare material defects) far from the training dataset, so-called out-of-distribution (OOD) data. We claim that safe computer-based interpretation of NDE data within quality critical applications, must respond sensible also to OOD data. A sensible response could be that the algorithms identify such OOD data and forward it to a human for further analysis. Such an OOD detector could facilitate a human-machine collaboration in a NDE 4.0 vision. In this work we have explored if a recently proposed (for industrial x-ray images) auto-encoder-based approach can be utilized as OOD detector (one-class classifier) for visual inspection data. The model is trained in an unsupervised manner on accepted input to reconstruct it at high precision. Simultaneously it is trained to remove synthetically added defect indications to generate a clean image patch, similar to denoising-auto-enoders. The difference between the input and reconstructed input is analyzed for OOD detection. We train and test the algorithm on a publicly available visual inspection dataset with surface defects. We achieve true positive rates at 0.90 with true negative rates at 0.99 and demonstrate detection of OOD data.
|
|
| 30. |
- Löfstrand, Anette, et al.
(författare)
-
Sequential infiltration synthesis and pattern transfer using 6 nm half-pitch carbohydrate-based fingerprint block copolymer
- 2021
-
Ingår i: Advances in Patterning Materials and Processes XXXVIII. - : SPIE. - 1996-756X .- 0277-786X. - 9781510640573 - 9781510640580 ; 11612
-
Konferensbidrag (refereegranskat)abstract
- This study presents how sequential infiltration synthesis of trimethyl aluminium and water into a carbohydrate-based block copolymer was used to enable pattern transfer of 6 nm half-pitch horizontal cylinders into silicon. Specular neutron reflectometry measurements of poly(styrene)-block-maltoheptaose self-assembled into horizontal cylinders indicate an increasing content of alumina after each sequential infiltration cycle, comparing 0, 1, 2, and 4 cycles, with alumina content reaching 2.4 vol% after four infiltrations cycles. Dry etching processes in inductively coupled plasma reactive ion etching for sub-10 nm patterns were developed, using a two-step technique: O2-plasma for polymer removal and a reactive ion etching of Si using a mixture of SF6 and C4F8 gases. Etch selectivity of more than 2:1 of silicon over alumina-like etch mask material was achieved. To evaluate the etching process, the etched Si structures were measured and characterized by scanning electron microscopy. These results are expected to be of use for nanofabrication and applications in the sub-10 nm regime.
|
|
| 31. |
- Mahendra, William Krista, et al.
(författare)
-
Understanding the Influence of Different Sample Sizes and Sample Techniques on Accuracy Assessment of Land Cover Mapping : Case Study of Salatiga city, Indonesia
- 2024
-
Ingår i: Eighth Geoinformation Science Symposium 2023 : Geoinformation Science for Sustainable Planet - Geoinformation Science for Sustainable Planet. - 0277-786X .- 1996-756X. - 9781510672697 ; 12977
-
Konferensbidrag (refereegranskat)abstract
- Remote sensing data has been proven capable and efficient as a powerful resource for large-scale land cover mapping. However, a map is considered acceptable with the required accuracy value. The problem related to sampling is how the sample amount and sample technique affect the accuracy of the land cover mapping. Furthermore, the accuracy assessment for mapping usually only utilizes accuracy measurement standards, which are commonly used. This research was conducted to measure the effect of the different sampling sizes and sampling methods on the accuracy value of large-scale land cover mapping using area based assessment approach. A visual interpretation was used as a reference while multispectral classification was carried out independently as an object to be tested for accuracy assessment. The number of classes interpreted was 25 and 9. We demonstrated the sampling methods applied were random sampling, stratified random sampling, and systematic grid sampling. A confusion matrix method was used to gain the overall accuracy. The result of this study showed that the number of 200 samples for land cover with 25 classes and 36 sample for nine classes could start the regularity against the actual accuracy. While the sample number below 200 and 36 for both land cover classes showed irregular fluctuations in the accuracy value. Using stratified random sampling was satisfactory for modeling the accuracy compared to random and systematic grid sampling. Thus, those results could be used to indicate accuracy value against different scenarios and gain a recommendation for assessing the accuracy ofland cover on a large scale.
|
|
| 32. |
- Ohashi, Akane, et al.
(författare)
-
Prediction of Ki-67 expression of breast cancer with a multiparametric model using MRI parameters from ultrafast DCE-MRI and DWI
- 2022
-
Ingår i: 16th International Workshop on Breast Imaging, IWBI 2022. - : SPIE. - 1996-756X .- 0277-786X. - 9781510655843 ; 12286
-
Konferensbidrag (refereegranskat)abstract
- The purpose of this study is to investigate the prediction of Ki-67 expression of breast cancers using MRI parameters from ultrafast (UF) DCE-MRI, DWI, T2WI, and the lesion size. Breast MRI was performed with a 3T scanner using dedicated breast coils. UF DCE-MRI was obtained using Compressed Sensing-VIBE (prototype sequence). As a kinetic parameter of UF DCE-MRI, maximum slope (MS) was defined as percentage relative enhancement (%/s), and time to enhance (TTE) was defined as the time interval between the aorta and lesion enhancement. The apparent diffusion coefficient (ADC) was derived from DWI. Two radiologists measured each MR parameter, and inter-rater agreement was evaluated. Univariate and multivariate logistic regression analyses were perfomed to predict low Ki-67 (< 14%) and high Ki-67 (≥ 14%) expression using MS, TTE, ADC, T2-signal intensity (SI), and lesion size. The significant parameters (p-values of < 0.05) were selected for the prediction model, and the diagnostic performance of the model was evaluated using ROC curve analysis. A total of 191 invasive carcinomas defined as mass lesions were included (72 low Ki-67/ 119 high Ki-67 lesions). The inter-rater agreements of all parameters were excellent. After univariate and multivariate logistic regression analysis, ADC and lesion size remained significant parameters. Using these significant parameters, the multi-parametric prediction model yielded an AUC of 0.77 (95%CI of 0.70-0.84) (sensitivity 72.3%, specificity 76.4%, and PPV 83.5%, and NPV 62.5%). DWI parameter (ADC) may be more valuable than UF DCE-MRI parameters (MS, TTE) to predict high Ki-67 in mass-shaped invasive breast carcinoma.
|
|
| 33. |
- Prasad, Suraj, et al.
(författare)
-
Photostability of Y-type electron acceptor molecules and related copolymer
- 2023
-
Ingår i: Proceedings Volume 12660, Organic, Hybrid, and Perovskite Photovoltaics XXIV. - : SPIE - The International Society for Optics and Photonics. ; 12660
-
Konferensbidrag (refereegranskat)abstract
- The lifetime of organic solar cells critically depends on the photochemical stability of the materials. To shed light on the photostability of novel Y-series electron acceptors, we investigate the evolution of optical properties and composition during one-sun illumination in ambient atmosphere of thin films of the small-molecule acceptor Y5 and its copolymers PF5-Y5 and PYT. We employ UV-vis, Fourier-transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS), to assess changes in these properties as a function of illumination time. UV-Vis spectra show that PF5-Y5 undergoes rapid photobleaching, while the Y5 spectrum remains essentially unaffected even after 30 hours of exposure. The absorption spectrum of PYT, which contains a different co-mer than PF5-Y5, is only weakly affected. XPS C1s spectra of the PF5- Y5 film show a decreasing main peak and the development of a new component after 30 hours exposure, while the Y5 film surface composition remained intact. The photodegradation products of PF5-Y5 are characterized by the presence of new carbonyl groups, emerging as absorption bands in the FTIR spectra, while such spectral changes are absent for the Y5 film, indicating that Y5 is resistant to photooxidation, while PF5-Y5 undergoes photochemical reactions. The faster photodegradation of PF5-Y5 compared to Y5 and PYT raises the question about the role of the copolymer’s BDT moiety in the photooxidation. These new insights on the dependence of the photostability of acceptor molecules on their molecular structure are expected to contribute to the design of stable acceptor copolymers for organic solar cells with long operational lifetimes.
|
|
| 34. |
- Prasciolu, Mauro, et al.
(författare)
-
On the use of multilayer Laue lenses with X-ray free electron lasers
- 2021
-
Ingår i: International Conference on X-Ray Lasers 2020. - : SPIE. - 1996-756X .- 0277-786X. - 9781510646186 ; 11886
-
Konferensbidrag (refereegranskat)abstract
- We report on the use of multilayer Laue lenses to focus the intense X-ray Free Electron Laser (XFEL) beam at the European XFEL to a spot size of a few tens of nanometers. We present the procedure to align and characterize these lenses and discuss challenges working with the pulse trains from this unique X-ray source.
|
|
| 35. |
- Pälli, Samu Ville, et al.
(författare)
-
Imaging experiments with a 340-GHz FMCW radar and frequency-diverse holograms
- 2023
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - 0277-786X .- 1996-756X. ; 12535
-
Konferensbidrag (refereegranskat)abstract
- We present recent developments of a standoff imaging system based on a frequency-diverse phase hologram and deep neural networks. The single-pixel imaging system operates in a monostatic configuration consisting of a 340-GHz FMCW radar and a frequency-diverse phase hologram to interrogate the radar down range direction with spatially varying, frequency-dependent field patterns. The measured back-reflected signal contains spatial reflectivity information from the target, and the fast chirp rate of the radar enables real-time imaging performance. Together with simultaneously acquired visible-light images, a deep neural network integrated into the submillimeter-wave data readout electronics can map the received signal onto a 2D image without mechanical or active electrical beam scanning. In experiments, we have collected submillimeter-wave and visible-light data of a moving target in the region of interest with a 60-Hz frame rate. The results suggest that the system can image the moving target with a resolution comparable to the theoretical diffraction limit. The minimal hardware complexity and good imaging performance of the demonstrated computational submillimeter-wave imaging system support its potential as a cost-effective and easily deployable solution for various imaging applications.
|
|
| 36. |
- Rodriguez-Fernandez, A., et al.
(författare)
-
X-ray forward diffraction wave-front propagation in Si and C single crystals : Simulations and experiments
- 2020
-
Ingår i: Advances in Computational Methods for X-Ray Optics V. - : SPIE. - 1996-756X .- 0277-786X. - 9781510637924 ; 11493
-
Konferensbidrag (refereegranskat)abstract
- The emergence of new high brilliance and high coherence facilities such as X-ray Free Electron Lasers (XFELs) and 4th generation synchrotrons open a new era in X-ray optics. Dynamical diffraction effects before disregarded are starting to play a role in the beam control of large scale facilities. In the case of XFEL facilities the temporal characteristics of the dynamical diffraction by thin perfect crystals can be used as a tool to generate femtosecond monochromatic pulses, in the case of self-seeding in the hard X-ray regime, but could even be used as method to characterize materials in this temporal range. In this contribution we present the first steps in the understanding of the spatial-displacement dependence of forward beams diffracted by thin crystals. The data collected by this technique is compared with crystal models based in dynamical diffraction theory. This type of study could open a new field to understand low strain materials in the femtosecond regime.
|
|
| 37. |
- Schmidt, Falko, 1992, et al.
(författare)
-
Non-equilibrium properties of an active nanoparticle in a harmonic potential
- 2021
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723 .- 2041-1723. ; 11926
-
Tidskriftsartikel (refereegranskat)abstract
- Active particles break out of thermodynamic equilibrium thanks to their directed motion, which leads to complex and interesting behaviors in the presence of confining potentials. When dealing with active nanoparticles, however, the overwhelming presence of rotational diffusion hinders directed motion, leading to an increase of their effective temperature, but otherwise masking the effects of self-propulsion. Here, we demonstrate an experimental system where an active nanoparticle immersed in a critical solution and held in an optical harmonic potential features far-from-equilibrium behavior beyond an increase of its effective temperature. When increasing the laser power, we observe a cross-over from a Boltzmann distribution to a non-equilibrium state, where the particle performs fast orbital rotations about the beam axis. These findings are rationalized by solving the Fokker-Planck equation for the particle’s position and orientation in terms of a moment expansion. The proposed self-propulsion mechanism results from the particle’s non-sphericity and the lower critical point of the solution.
|
|
| 38. |
- Seidel, M., et al.
(författare)
-
Multi-pass Cell Based Nonlinear Pulse Compression of Yb : YAG Pump-Probe Lasers at FLASH
- 2023
-
Ingår i: X-Ray Free-Electron Lasers : Advances in Source Development and Instrumentation VI - Advances in Source Development and Instrumentation VI. - 1996-756X .- 0277-786X. - 9781510662827 ; 12581
-
Konferensbidrag (refereegranskat)abstract
- The majority of user experiments at the high repetition-rate free electron laser (FEL) facility FLASH are of pump-probe type, combining the extreme ultraviolet (XUV) or soft x-ray radiation from the FEL with ultrashort pulses generated by optical lasers. In this contribution, we demonstrate the advantages of using high-power Yb:YAG lasers with subsequent nonlinear pulse compression stages based on multi-pass cells (MPC). The approach enables the combination of hundreds of kHz to MHz repetition-rates, hundreds of watts of average powers and excellent intensity stabilities. We present the characteristics of the MPC-based pump-probe laser at the FLASH plane-grating beamlines. Furthermore, we report pulse compression to 8.2 fs pulse duration and the seeding of an optical parametric amplifier generating mid-IR radiation tunable from 1.4 µm to 16 µm.
|
|
| 39. |
- Shiraki, Ryuta, et al.
(författare)
-
Highly spectrally efficient metro networks that adopt fiber-level granular routing on overlaid line-/ring-shaped virtual topologies
- 2020
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 11308
-
Konferensbidrag (refereegranskat)abstract
- We propose a cost-effective metro network architecture with fiber-granular routing and path-granular add/drop operations together with its ILP-based design algorithm. The proposal alleviates the impact of filtering impairment while using already deployed OXC/ROADM nodes. Numerical simulations on several real-world metro topologies verify that it increases the spectral efficiency compared to the ideal method for DWDM networks.
|
|
| 40. |
- Shitvov, A., et al.
(författare)
-
Broadband coated lens solutions for FIR-mm-wave instruments
- 2022
-
Ingår i: Proceedings of SPIE, the International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 12190
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents recent results of ongoing European Space Agency funded program of work aimed at developing large dielectric lenses suitable for future satellite missions, with a particular focus on requirements for CMB polarimetry. Two lens solutions are being investigated: (i) polymer lenses with broadband multi-layer antireflection coatings; (ii) silicon lenses with surface-structured anti-reflection coating represented by directly machined pyramidal features. For each solution, base materials with and without coatings have been optically characterized over a range of temperatures down to ~10 K. Full lens solutions are under manufacture and will be tested in a bespoke large cryo-optical facility.
|
|
| 41. |
- Sourikopoulos, Ilias, et al.
(författare)
-
The H2020-SPACE-SIPHODIAS project: Space-grade optoelectronic interfaces for photonic digital and analogue very-high-throughput satellite payloads
- 2021
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 11852
-
Konferensbidrag (refereegranskat)abstract
- The EU-SIPhoDiAS project deals with the development of critical photonic building blocks needed for high-performance and low size, weight, and power (SWaP) photonics-enabled Very High Throughput Satellites (VHTS). In this presentation, we report on the design and fabrication activities during the first year of the project concerning the targeted family of digital and microwave photonic components. This effort aims to demonstrate components of enhanced reliability at technology readiness level (TRL) 7. Specifically, with respect to microwave photonic links, we report: (i) the design of Ka and Q-bands analogue photodetectors that will be assembled in compact packages, allowing for very high bandwidth per unit area and (ii) on the design of compact V-band GaAs electro-optic modulator arrays, which use a folded-path optical configuration to manage all fiber interfaces packaged opposite direct in-line RF feeds for ease of board layouts and mass/size benefits. With respect to digital links, we report on the development of 100 Gb/s (4 x 25 Gb/s) digital optical transceiver sub-assemblies developed using flip-chip mounting of electronic and opto-parts on a high-reliability borosilicate substrate. The transceiver chipset developed specifically for this project refers to fully-custom 25 Gb/s radiation hard (RH) VCSEL driver and TIA ICs designed in IHP’s 130 nm SiGe BiCMOS Rad-Hard process.
|
|
| 42. |
- Sultana, Aqsa, et al.
(författare)
-
R2UNet for melt pond detection
- 2023
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - 0277-786X .- 1996-756X. ; 12527
-
Konferensbidrag (refereegranskat)abstract
- The massive shift in temperatures in the Arctic region has caused the increased Albedo effect as higher amount of solar energy is absorbed in the darker surface due to melting ice and snow. This continuous regional warming results in further melting of glaciers and loss of sea ice. Arctic melt ponds are important indicators of Arctic climate change. High-resolution aerial photographs are invaluable for identifying different sea ice features and are great source for validating, tuning, and improving climate models. Due to the complex shapes and unpredictable boundaries of melt ponds, it is extremely tedious, taxing, and time-consuming to manually analyze these remote sensing data that lead to the need for automatizing the technique. Deep learning is a powerful tool for semantic segmentation, and one of the most popular deep learning architectures for feature cascading and effective pixel classification is the UNet architecture. We introduce an automatic and robust technique to predict the bounding boxes for melt ponds using a Multiclass Recurrent Residual UNet (R2UNet) with UNet as a base model. R2UNet mainly consists of two important components in the architecture namely residual connection and recurrent block in each layer. The residual learning approach prevents vanishing gradients in deep networks by introducing shortcut connections, and the recurrent block, which provides a feedback connection in a loop, allows outputs of a layer to be influenced by subsequent inputs to the same layer. The algorithm is evaluated on Healy-Oden Trans Arctic Expedition (HO-TRAX) dataset containing melt ponds obtained during helicopter photography flights between 5 August and 30 September 2005. The testing and evaluation results show that R2UNet provides improved and superior performance when compared to UNet, Residual UNet (Res-UNet) and Recurrent U-Net (R-UNet).
|
|
| 43. |
- Sun, Yifan, et al.
(författare)
-
Sensitive parameters affecting dark current characteristics of SCD
- 2021
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 12061
-
Konferensbidrag (refereegranskat)abstract
- The sensitive parameters affecting the dark current characteristics are further studied by using InAs/GaSb type II superlattice (T2SL) pBpp structure long wavelength Infrared photodetectors. Generation of recombination (G-R), surface leakage current and tunneling current are the main components of dark current. Using pBpp structure can suppress them effectively, thereby decreasing dark current. Based on the k · p method, the band structure of InAs/GaSb T2SL and InAs/AlSb T2SL can be obtained by solving the 8-band k · p model. We have calculated different doping levels of pBpp detector and different layer thicknesses of pBpp detector. For pBpp device, we consider the dark current for different contact layer doping and different absorber layer doping. We also study the influence of different contact layer thicknesses and different absorber layer thicknesses on dark current. The dark current of pBpp detector is dominant by tunneling current at low temperature, and diffusion is the main limiting mechanism in dark current at high temperature, for barrier layer inhibits generation-recombination contribution. Eventually, the dark current of a pBpp structure has been calculated for versus voltage at 77 K.
|
|
| 44. |
- Susnjar, Stefan, et al.
(författare)
-
Reconstruction of Raman spectra of two-layer diffusive media: model-based approach in time-domain
- 2023
-
Ingår i: Proceedings of SPIE : Diffuse Optical Spectroscopy and Imaging IX - Diffuse Optical Spectroscopy and Imaging IX. - 0277-786X .- 1996-756X. - 9781510664654 ; 12628, s. 1-126280
-
Konferensbidrag (refereegranskat)abstract
- We propose a novel analytical time-domain model for migration of Raman scattered photons in inhomogeneous two-layer diffusive media. Based on this model, the methods for reconstruction of the Raman spectra of the two layers are developed, tested in simulations and validated on phantom measurements data.
|
|
| 45. |
- Tello Marmolejo, Javier, 1995, et al.
(författare)
-
A water droplet as a toy atom
- 2022
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; 12198
-
Konferensbidrag (refereegranskat)abstract
- Common atomic physics courses jump from the square and harmonic well potentials straight to the hydrogen atom. However, there is a missing link in between, the spherical well potential. Although it is included in some textbooks, the lack of an experimental backing means the problem quickly becomes mathematically complex. Here we have built an optical toy atom using the scattering of an optically levitated, evaporating water droplet. We find a greatly simplified Mie scattering spectrum composed of a series of evolving Fano resonances organized in a set of combs. The whole spectrum can be intuitively explained through an analogy to a quantum spherical well potential. This produces a model of an atom including ground and excited states, quantized angular momentum, and tunneling.
|
|
| 46. |
- Tomic, Hanna, et al.
(författare)
-
Tumor growth rate estimations in a breast cancer screening population
- 2022
-
Ingår i: 16th International Workshop on Breast Imaging, IWBI 2022. - : SPIE. - 0277-786X .- 1996-756X. - 9781510655843 ; 12286
-
Konferensbidrag (refereegranskat)abstract
- Tumor growth rate estimations can provide useful information about tumor progression and aggressiveness. Understanding the breast cancer progression and aggressiveness could aid with personalized screening/follow-up, treatment options, and prognosis. This paper reports a preliminary estimation of the tumor volume doubling time (TVDT) for cancers detected during the Malmö Breast Tomosynthesis Screening Trial (MBTST). The trial included 14 848 women in whom 139 cancers were detected. Out of those, 101 spiculated or circumscribed masses, had prior images available, making them suitable for tumor growth evaluation. In the preliminary analysis of images from 30 women, tumor size was measured in mammograms from MBTST and prior images. The analyzed cases were selected among women with visible tumors in two consecutive screening exams. The tumor size was measured in two orthogonal directions. The average of the two measurements was used in the analysis. The mean time and the corresponding standard deviation (SD) between the two consecutive mammograms were 744 ± 73 days. The mean TVDT and SD were 637 ± 428 days (range 159-2373 days). Future work will include the analysis of a larger number of women and a stratification of TVDT related to screening intervals.
|
|
| 47. |
- Torlegård, B., et al.
(författare)
-
Identifying and modelling clinical subpopulations from the Malmö breast tomosynthesis screening trial
- 2020
-
Ingår i: 15th International Workshop on Breast Imaging, IWBI 2020. - : SPIE. - 0277-786X .- 1996-756X. - 9781510638310 ; 11513
-
Konferensbidrag (refereegranskat)abstract
- Virtual Clinical Trials (VCT) are an effective tool to evaluate the performance of novel imaging systems using computer simulations. VCT results depend on the selection of virtual patient populations. In the case of breast imaging, virtual patients should be matched to a desired clinical population in terms of selected anatomical or demographic descriptors. We are developing a virtual population of women who participated in the Malmö Breast Tomosynthesis Screening Trial (MBTST). We have used clinical values of the compressed breast thickness and volumetric breast density to develop a multidimensional distribution of women in MBTST. Breast density and thickness values were obtained from anonymized, previously collected tomosynthesis images of 14,746 women. In this paper, we compare several approaches to identify clinical subpopulations and select virtual patients that represent various groups of clinical subjects. We performed two methods to identify clinical subpopulations by clustering clinical data using the K-means algorithm or woman's age. The obtained clusters have been explored and compared using the silhouette mean. The K-means algorithm yielded grouping of MBTST data into two clusters; however, that grouping was, shown to be suboptimal by the silhouette analysis. The agebased clustering showed significant overlap in terms of breast thickness and density. We also compared two approaches to select sets of representative phantoms. Our analysis has emphasized benefits and limitations of different clustering methods. The preferred method depends on the specific task that should be addressed using VCTs. Simulation of representative phantoms is ongoing. Potential correlations with pathological findings and/or parenchymal properties will be investigated.
|
|
| 48. |
- Urquiza-González, M., et al.
(författare)
-
Benchmark evaluation for a single frequency continuous wave OPO seeded pulsed dye amplifier for high-resolution laser spectroscopy
- 2023
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. - 9781510659032
-
Konferensbidrag (refereegranskat)abstract
- The study of the atomic spectrum via resonant laser excitation provides access to underlying effects caused by the nuclear structure, which is of special interest in short-lived radioisotopes produced at Isotope Separator On-Line (ISOL) facilities. Current implementations of resonant laser ionization techniques often limit the extraction of the nuclear observables due to the low spectral resolution of the pulsed laser systems deployed. Several high-resolution spectroscopy techniques demand spectral widths in the order of hundreds of MHz and below. A proven solution to reduce this linewidth is the pulsed amplification of a narrow-band continuous wave (cw) laser. This work presents the demonstration of a pulsed dye amplifier seeded by a commercially available cw Optical Parametric Oscillator (OPO). The performance of this system was compared with competing setups using a cw dye laser seed source as well as a frequency mixing technique using a combination of an injection-locked titanium:sapphire (Ti:Sa) and a Nd:YVO4 laser. Spectral bandwidths of the systems were measured using a high finesse Fabry-Perot Interferometer, resulting in comparable optical linewidths between 140 to 156 MHz at a wavelength of 328 nm for the different laser setups. Suitability for on-line experiments was validated by performing high-resolution spectroscopy of radioactive silver isotopes in the Collinear Resonance Ionization Spectroscopy (CRIS) experiment at the Isotope Separator On-Line Device (ISOLDE), at the European Organization for Nuclear Research (CERN). The quality of the hyperfine spectra was similar for the dye and the OPO seed and the deduced hyperfine splitting was in good agreement with literature, while the frequency mixing technique exhibited less precise results attributed to the frequency instabilities and mode-hops of the single-mode Nd:YVO4 laser.
|
|
| 49. |
- Veisz, Laszlo, et al.
(författare)
-
Relativistic electron acceleration from nanotips
- 2023
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE - International Society for Optical Engineering. - 0277-786X .- 1996-756X. - 9781510662780 - 9781510662797
-
Konferensbidrag (refereegranskat)abstract
- Vacuum laser acceleration (VLA) of electrons has been an intense field of research for a long time due to the extremely high (>1 TV/m) accelerating fields. However, it is very challenging to realize and only a few promising experiments have been performed which have demonstrated the principle. Here, we report on the interaction of relativistic intensity (10-20 Wcm-2) sub-two optical cycle (<5 fs) laser pulses with nanotips to realize and optimize VLA. Various properties of accelerated electrons (angular distribution, charge, and electron spectrum) are measured with different intensities and carrier envelope phases of the laser pulse. Among others, waveform dependence of the electron propagation direction is observed. Furthermore, comparable or even higher electron energies beyond 10 MeV are detected with lower laser intensity, i.e., longer focusing, than with high intensity. These surprising results are reproduced using Particle-In-Cell simulations, which indicate a nanophotonics electron emission from the nanotip followed by VLA. In fact, the unexpected observations are a direct proof of the VLA process and provide a way to optimize it towards higher energy, isolated, attosecond electron bunch generation.
|
|
| 50. |
- Viti, Leonardo, et al.
(författare)
-
High-speed hBN/graphene/hBN room-temperature terahertz nano-receivers
- 2021
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. ; SPIE 11685
-
Konferensbidrag (refereegranskat)abstract
- We report room temperature terahertz detection in hBN/graphene/hBN heterostructures. The obtained record combination of high-speed (response time < 1 ns) and high sensitivity (noise equivalent power ~ 100 pWHz-1/2) is enabled by the photo-thermoelectric effect.
|
|
