SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "L773:1944 8244 OR L773:1944 8252 srt2:(2020-2024)"

Sökning: L773:1944 8244 OR L773:1944 8252 > (2020-2024)

  • Resultat 1-50 av 291
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Abdelhamid, Hani Nasser, 1986-, et al. (författare)
  • Three-Dimensional Printing of Cellulose/Covalent Organic Frameworks (CelloCOFs) for CO2 Adsorption and Water Treatment
  • 2023
  • Ingår i: ACS Applied Materials and Interfaces. - 1944-8244 .- 1944-8252. ; 15:51, s. 59795-59805
  • Tidskriftsartikel (refereegranskat)abstract
    • The development of porous organic polymers, specifically covalent organic frameworks (COFs), has facilitated the advancement of numerous applications. Nevertheless, the limited availability of COFs solely in powder form imposes constraints on their potential applications. Furthermore, it is worth noting that COFs tend to undergo aggregation, leading to a decrease in the number of active sites available within the material. This work presents a comprehensive methodology for the transformation of a COF into three-dimensional (3D) scaffolds using the technique of 3D printing. As part of the 3D printing process, a composite material called CelloCOF was created by combining cellulose nanofibrils (CNF), sodium alginate, and COF materials (i.e., COF-1 and COF-2). The intervention successfully mitigated the agglomeration of the COF nanoparticles, resulting in the creation of abundant active sites that can be effectively utilized for adsorption purposes. The method of 3D printing can be described as a simple and basic procedure that can be adapted to accommodate hierarchical porous materials with distinct micro- and macropore regimes. This technology demonstrates versatility in its use across a range of COF materials. The adsorption capacities of 3D CelloCOF materials were evaluated for three different adsorbates: carbon dioxide (CO2), heavy metal ions, and perfluorooctanesulfonic acid (PFOS). The results showed that the materials exhibited adsorption capabilities of 19.9, 7.4–34, and 118.5–410.8 mg/g for CO2, PFOS, and heavy metals, respectively. The adsorption properties of the material were found to be outstanding, exhibiting a high degree of recyclability and exceptional selectivity. Based on our research findings, it is conceivable that the utilization of custom-designed composites based on COFs could present new opportunities in the realm of water and air purification.
  •  
2.
  • Aboulfadl, Hisham, 1986, et al. (författare)
  • Alkali Dispersion in (Ag,Cu)(In,Ga)Se2 Thin Film Solar Cells - Insight from Theory and Experiment
  • 2021
  • Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 13:6, s. 7188-7199
  • Tidskriftsartikel (refereegranskat)abstract
    • Silver alloying of Cu(In,Ga)Se2 absorbers for thin film photovoltaics offers improvements in open-circuit voltage, especially when combined with optimal alkali-treatments and certain Ga concentrations. The relationship between alkali distribution in the absorber and Ag alloying is investigated here, combining experimental and theoretical studies. Atom probe tomography analysis is implemented to quantify the local composition in grain interiors and at grain boundaries. The Na concentration in the bulk increases up to ∼60 ppm for [Ag]/([Ag] + [Cu]) = 0.2 compared to ∼20 ppm for films without Ag and up to ∼200 ppm for [Ag]/([Ag] + [Cu]) = 1.0. First-principles calculations were employed to evaluate the formation energies of alkali-on-group-I defects (where group-I refers to Ag and Cu) in (Ag,Cu)(In,Ga)Se2 as a function of the Ag and Ga contents. The computational results demonstrate strong agreement with the nanoscale analysis results, revealing a clear trend of increased alkali bulk solubility with the Ag concentration. The present study, therefore, provides a more nuanced understanding of the role of Ag in the enhanced performance of the respective photovoltaic devices.
  •  
3.
  • Ahmad, Mariam, et al. (författare)
  • Uncovering the Electronic State Interplay at Metal Oxide Electron Transport Layer/Nonfullerene Acceptor Interfaces in Stable Organic Photovoltaic Devices
  • 2023
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 15:47, s. 55065-55072
  • Tidskriftsartikel (refereegranskat)abstract
    • The implementation of sputter-deposited TiOx as an electron transport layer in nonfullerene acceptor-based organic photovoltaics has been shown to significantly increase the long-term stability of devices compared to conventional solution-processed ZnO due to a decreased photocatalytic activity of the sputtered TiOx. In this work, we utilize synchrotron-based photoemission and absorption spectroscopies to investigate the interface between the electron transport layer, TiOx prepared by magnetron sputtering, and the nonfullerene acceptor, ITIC, prepared in situ by spray deposition to study the electronic state interplay and defect states at this interface. This is used to unveil the mechanisms behind the decreased photocatalytic activity of the sputter-deposited TiOx and thus also the increased stability of the organic solar cell devices. The results have been compared to similar measurements on anatase TiOx since anatase TiOx is known to have a strong photocatalytic activity. We show that the deposition of ITIC on top of the sputter-deposited TiOx results in an oxidation of Ti3+ species in the TiOx and leads to the emergence of a new O 1s peak that can be attributed to the oxygen in ITIC. In addition, increasing the thickness of ITIC on TiOx leads to a shift in the O 1s and C 1s core levels toward higher binding energies, which is consistent with electron transfer at the interface. Resonant photoemission at the Ti L-edge shows that oxygen vacancies in sputtered TiOx lie mostly in the surface region, which contrasts the anatase TiOx where an equal distribution between surface and subsurface oxygen vacancies is observed. Furthermore, it is shown that the subsurface oxygen vacancies in sputtered TiOx are strongly reduced after ITIC deposition, which can reduce the photocatalytic activity of the oxide, while the oxygen vacancies in model anatase TiOx are not affected upon ITIC deposition. This difference can explain the inferior photocatalytic activity of the sputter-deposited TiOx and thus also the increased stability of devices with sputter-deposited TiOx used as an electron transport layer.
  •  
4.
  • Alipoormazandarani, Niloofar, et al. (författare)
  • Functional Lignin Nanoparticles with Tunable Size and Surface Properties : Fabrication, Characterization, and Use in Layer-by-Layer Assembly
  • 2021
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 13:22, s. 26308-26317
  • Tidskriftsartikel (refereegranskat)abstract
    • Lignin is the richest source of renewable aromatics and has immense potential for replacing synthetic chemicals. The limited functionality of lignin is, however, challenging for its potential use, which motivates research for creating advanced functional lignin-derived materials. Here, we present an aqueous-based acid precipitation method for preparing functional lignin nanoparticles (LNPs) from carboxy-methylated or carboxy-pentylated lignin. We observe that the longer grafted side chains of carboxy-pentylated lignin allow for the formation of larger LNPs. The functional nanoparticles have high tolerance against salt and aging time and well-controlled size distribution with R-h <= 60 nm over a pH range of 5-11. We further investigate the layer-by-layer (LbL) assembly of the LNPs and poly(allylamine hydrochloride) (PAH) using a stagnation point adsorption reflectometry (SPAR) and quartz crystal microbalance with dissipation (QCM-D). Results demonstrate that LNPs made of carboxypentylated lignin (i.e., PLNPs with the adsorbed mass of 3.02 mg/m(2)) form a more packed and thicker adlayer onto the PAH surface compared to those made of carboxymethylated lignin (i.e., CLNPs with the adsorbed mass of 2.51 mg/m(2)). The theoretical flux, J, and initial rate of adsorption, (d Gamma/dt)(0), analyses confirm that 22% of PLNPs and 20% of CLNPs arriving at the PAH surface are adsorbed. The present study provides a feasible platform for engineering LNPs with a tunable size and adsorption behavior, which can be adapted in hionanomaterial production.
  •  
5.
  • Alvarez, Sol Gutierrez, et al. (författare)
  • Charge Carrier Diffusion Dynamics in Multisized Quaternary Alkylammonium-Capped CsPbBr3 Perovskite Nanocrystal Solids
  • 2021
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 13:37, s. 44742-44750
  • Tidskriftsartikel (refereegranskat)abstract
    • CsPbBr3 quantum dots (QDs) are promising candidates for optoelectronic devices. The substitution of oleic acid ( OA) and oleylamine ( OLA) capping agents with a quaternary alkylammonium such as di-dodecyl dimethyl ammonium bromide (DDAB) has shown an increase in external quantum efficiency (EQE) from 0.19% (OA/OLA) to 13.4% (DDAB) in LED devices. The device performance significantly depends on both the diffusion length and the mobility of photoexcited charge carriers in QD solids. Therefore, we investigated the charge carrier transport dynamics in DDAB-capped CsPbBr3 QD solids by constructing a bi-sized QD mixture film. Charge carrier diffusion can be monitored by quantitatively varying the ratio between two sizes of QDs, which varies the mean free path of the carriers in each QD cluster. Excited-state dynamics of the QD solids obtained from ultrafast transient absorption spectroscopy reveals that the photogenerated electrons and holes are difficult to diffuse among small-sized QDs (4 nm) due to the strong quantum confinement. On the other hand, both photoinduced electrons and holes in large-sized QDs (10 nm) would diffuse toward the interface with the small-sized QDs, followed by a recombination process. Combining the carrier diffusion study with a Monte Carlo simulation on the QD assembly in the mixture films, we can calculate the diffusion lengths of charge carriers to be similar to 239 +/- 16 nm in 10 nm CsPbBr3 QDs and the mobility values of electrons and holes to be 2.1 (+/- 0.1) and 0.69 (+/- 0.03) cm(2)/V s, respectively. Both parameters indicate an efficient charge carrier transport in DDAB-capped QD films, which rationalized the perfect performance of their LED device application.
  •  
6.
  • Alvi, Sajid, et al. (författare)
  • Synthesis and Mechanical Characterization of a CuMoTaWV High-Entropy Film by Magnetron Sputtering
  • 2020
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 12:18, s. 21070-21079
  • Tidskriftsartikel (refereegranskat)abstract
    • Development of high-entropy alloy (HEA) films is a promising and cost-effective way to incorporate these materials of superior properties in harsh environments. In this work, a refractory high-entropy alloy (RHEA) film of equimolar CuMoTaWV was deposited on silicon and 304 stainless-steel substrates using DC-magnetron sputtering. A sputtering target was developed by partial sintering of an equimolar powder mixture of Cu, Mo, Ta, W, and V using spark plasma sintering. The target was used to sputter a nanocrystalline RHEA film with a thickness of ∼900 nm and an average grain size of 18 nm. X-ray diffraction of the film revealed a body-centered cubic solid solution with preferred orientation in the (110) directional plane. The nanocrystalline nature of the RHEA film resulted in a hardness of 19 ± 2.3 GPa and an elastic modulus of 259 ± 19.2 GPa. A high compressive strength of 10 ± 0.8 GPa was obtained in nanopillar compression due to solid solution hardening and grain boundary strengthening. The adhesion between the RHEA film and 304 stainless-steel substrates was increased on annealing. For the wear test against the E52100 alloy steel (Grade 25, 700–880 HV) at 1 N load, the RHEA film showed an average coefficient of friction (COF) and wear rate of 0.25 (RT) and 1.5 (300 °C), and 6.4 × 10–6 mm3/N m (RT) and 2.5 × 10–5 mm3/N m (300 °C), respectively. The COF was found to be 2 times lower at RT and wear rate 102 times lower at RT and 300 °C than those of 304 stainless steel. This study may lead to the processing of high-entropy alloy films for large-scale industrial applications.
  •  
7.
  • An, Jincheng, et al. (författare)
  • Fine-Tuning by Triple Bond of Carbazole Derivative Dyes to Obtain High Efficiency for Dye-Sensitized Solar Cells with Copper Electrolyte
  • 2020
  • Ingår i: ACS Applied Materials and Interfaces. - : NLM (Medline). - 1944-8244 .- 1944-8252. ; 12:41, s. 46397-46405
  • Tidskriftsartikel (refereegranskat)abstract
    • Three novel dyes consisting of a 5,8,15-tris(2-ethylhexyl)-8,15-dihydro-5H-benzo[1,2-b:3,4-b':6,5-b″]tricarbazole (BTC) electron-donating group and a 4,7-bis(4-hexylthiophen-2-yl)benzo[c][1,2,5]thiadiazole (BTBT) π-bridge with an anchoring group of phenyl carboxyl acid were synthesized and applied in dye-sensitized solar cells (DSCs).The AJ202 did not contain any triple bonds, the AJ201's ethynyl group was inserted between the BTC and BTBT units, and the AJ206's ethynyl group was introduced between the BTBT moiety and the anchor group. The inclusion and position of the ethynyl linkage in the sensitizer molecules significantly altered the electrochemical properties of these dyes, which can fine-tune the energy levels of the dyes. The best performing devices contained AJ206 as a sensitizer and a Cu(I/II) redox couple, which resulted in a power conversion efficiency (PCE) up to 10.8% under the standard AM 1.5 G illumination, which obtained PCEs higher than those from the devices that contained AJ201 (9.2%) and AJ202 (9.7%) under the same conditions. The highest occupied molecular orbital and lowest unoccupied molecular orbital levels of the sensitizers were tuned to be well-suited for the Cu(I/II) redox potential and the Fermi level of TiO2. The innovative synthesis of a tricarbazole-based donor moiety in a sensitizer used in combination with a Cu(I/II) redox couple has resulted in relatively high PCEs.
  •  
8.
  •  
9.
  • An, Rong, et al. (författare)
  • Ti–Si–Zr–Zn Nanometallic Glass Substrate with a Tunable Zinc Composition for Surface-Enhanced Raman Scattering of Cytochrome c
  • 2023
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 15:21, s. 25275-25284
  • Tidskriftsartikel (refereegranskat)abstract
    • As a remarkably powerful analytical technique, surface-enhanced Raman scattering (SERS) continues to find applications from molecular biology and chemistry to environmental and food sciences. In search of reliable and affordable SERS substrates, the development has moved from noble metals to other diverse types of structures, e.g., nano-engineered semiconductor materials, but the cost of the enhancement factors (EF) substantially decreasing. In this work, we employ biocompatible thin films of Ti–Si–Zr–Zn nanometallic glasses as the SERS substrates, while tuning the Zn composition. Aided by quartz crystal microbalance, we find that the composition of 4.3% Zn (Ti–Si–Zr–Zn4.3) gives an ultrasensitive detection of Cytochrome c (Cyt c) with an EF of 1.38 × 104, 10-fold higher than the previously reported EF in the semiconducting metal oxide nanomaterials, such as TiO2, and even comparable to the reported noble-metal-assisted semiconducting tungsten oxide hydrate. Ti–Si–Zr–Zn4.3 exhibits a stronger adhesion force toward Cyt c, which ensures the strong binding of Cyt c to the surface, facilitating the Cyt c adsorption onto the surface and thus enhancing the SERS signal. The high separation efficiency of photoinduced electrons and holes in Ti–Si–Zr–Zn4.3 is also acknowledged for promoting the SERS activity. 
  •  
10.
  • Andersson, John, 1993, et al. (författare)
  • Polymer Brushes on Silica Nanostructures Prepared by Aminopropylsilatrane Click Chemistry: Superior Antifouling and Biofunctionality
  • 2023
  • Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 15:7, s. 10228-10239
  • Tidskriftsartikel (refereegranskat)abstract
    • In nanobiotechnology, the importance of controlling interactions between biological molecules and surfaces is paramount. In recent years, many devices based on nanostructured silicon materials have been presented, such as nanopores and nanochannels. However, there is still a clear lack of simple, reliable, and efficient protocols for preventing and controlling biomolecule adsorption in such structures. In this work, we show a simple method for passivation or selective biofunctionalization of silica, without the need for polymerization reactions or vapor-phase deposition. The surface is simply exposed stepwise to three different chemicals over the course of ∼1 h. First, the use of aminopropylsilatrane is used to create a monolayer of amines, yielding more uniform layers than conventional silanization protocols. Second, a cross-linker layer and click chemistry are used to make the surface reactive toward thiols. In the third step, thick and dense poly(ethylene glycol) brushes are prepared by a grafting-to approach. The modified surfaces are shown to be superior to existing options for silica modification, exhibiting ultralow fouling (a few ng/cm2) after exposure to crude serum. In addition, by including a fraction of biotinylated polymer end groups, the surface can be functionalized further. We show that avidin can be detected label-free from a serum solution with a selectivity (compared to nonspecific binding) of more than 98% without the need for a reference channel. Furthermore, we show that our method can passivate the interior of 150 nm × 100 nm nanochannels in silica, showing complete elimination of adsorption of a sticky fluorescent protein. Additionally, our method is shown to be compatible with modifications of solid-state nanopores in 20 nm thin silicon nitride membranes and reduces the noise in the ion current. We consider these findings highly important for the broad field of nanobiotechnology, and we believe that our method will be very useful for a great variety of surface-based sensors and analytical devices.
  •  
11.
  • Ansari, Shaquib Rahman, 1993-, et al. (författare)
  • Hyperthermia-Induced In Situ Drug Amorphization by Superparamagnetic Nanoparticles in Oral Dosage Forms
  • 2022
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 14:19, s. 21978-21988
  • Tidskriftsartikel (refereegranskat)abstract
    • Superparamagnetic iron oxide nanoparticles (SPIONs) generate heat upon exposure to an alternating magnetic field (AMF), which has been studied for hyperthermia treatment and triggered drug release. This study introduces a novel application of magnetic hyperthermia to induce amorphization of a poorly aqueous soluble drug, celecoxib, in situ in tablets for oral administration. Poor aqueous solubility of many drug candidates is a major hurdle in oral drug development. A novel approach to overcome this challenge is in situ amorphization of crystalline drugs. This method facilitates amorphization by molecular dispersion of the drug in a polymeric network inside a tablet, circumventing the physical instability encountered during the manufacturing and storage of conventional amorphous solid dispersions. However, the current shortcomings of this approach include low drug loading, toxicity of excipients, and drug degradation. Here, doped SPIONs produced by flame spray pyrolysis are compacted with polyvinylpyrrolidone and celecoxib and exposed to an AMF in solid state. A design of experiments approach was used to investigate the effects of SPION composition (Zn0.5Fe2.5O4 and Mn0.5Fe2.5O4), doped SPION content (10–20 wt %), drug load (30–50 wt %), and duration of AMF (3–15 min) on the degree of drug amorphization. The degree of amorphization is strongly linked to the maximum tablet temperature achieved during the AMF exposure (r = 0.96), which depends on the SPION composition and content in the tablets. Complete amorphization is achieved with 20 wt % Mn0.5Fe2.5O4 and 30 wt % celecoxib in the tablets that reached the maximum temperature of 165.2 °C after 15 min of AMF exposure. Furthermore, manganese ferrite exhibits no toxicity in human intestinal Caco-2 cell lines. The resulting maximum solubility of in situ amorphized celecoxib is 5 times higher than that of crystalline celecoxib in biorelevant intestinal fluid. This demonstrates the promising capability of SPIONs as enabling excipients to magnetically induce amorphization in situ in oral dosage forms.
  •  
12.
  • Antonio Cabas, Vidani, et al. (författare)
  • Influence of the Rear Interface on Composition and Photoluminescence Yield of CZTSSe Absorbers: A Case for an Al2O3 Intermediate Layer
  • 2021
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 13:16, s. 19487-19496
  • Tidskriftsartikel (refereegranskat)abstract
    • The rear interface of kesterite absorbers with Mo back contact represents one of the possible sources of nonradiative voltage losses (Delta V-oc,V-nrad) because of the reported decomposition reactions, an uncontrolled growth of MoSe2, or a nonoptimal electrical contact with high recombination. Several intermediate layers (IL), such as MoO3, TiN, and ZnO, have been tested to mitigate these issues, and efficiency improvements have been reported. However, the introduction of IL also triggers other effects such as changes in alkali diffusion, altered morphology, and modifications in the absorber composition, all factors that can also influence Delta V-oc,V-nrad. In this study, the different effects are decoupled by designing a special sample that directly compares four rear structures (SLG, SLG/Mo, SLG/Al2O3, and SLG/Mo/Al2O3) with a Na-doped kesterite absorber optimized for a device efficiency >10%. The IL of choice is Al2O3 because of its reported beneficial effect to reduce the surface recombination velocity at the rear interface of solar cell absorbers. Identical annealing conditions and alkali distribution in the kesterite absorber are preserved, as measured by time-of-flight secondary ion mass spectrometry and energy-dispersive X-ray spectroscopy. The lowest Delta V-oc,V-nrad of 290 mV is measured for kesterite grown on Mo, whereas the kesterite absorber on Al2O3 exhibits higher nonradiative losses up to 350 mV. The anticipated field-effect passivation from Al2O3 at the rear interface could not be observed for the kesterite absorbers prepared by the two-step process, further confirmed by an additional experiment with air annealing. Our results suggest that Mo with an in situ formed MoSe2 remains a suitable back contact for high-efficiency kesterite devices.
  •  
13.
  • Aprojanz, J., et al. (författare)
  • High-Mobility Epitaxial Graphene on Ge/Si(100) Substrates
  • 2020
  • Ingår i: ACS applied materials & interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 12:38, s. 43065-43072
  • Tidskriftsartikel (refereegranskat)abstract
    • Graphene was shown to reveal intriguing properties of its relativistic two-dimensional electron gas; however, its implementation to microelectronic applications is missing to date. In this work, we present a comprehensive study of epitaxial graphene on technologically relevant and in a standard CMOS process achievable Ge(100) epilayers grown on Si(100) substrates. Crystalline graphene monolayer structures were grown by means of chemical vapor deposition (CVD). Using angle-resolved photoemission spectroscopy and in situ surface transport measurements, we demonstrate their metallic character both in momentum and real space. Despite numerous crystalline imperfections, e.g., grain boundaries and strong corrugation, as compared to epitaxial graphene on SiC(0001), charge carrier mobilities of 1 × 104 cm2/Vs were obtained at room temperature, which is a result of the quasi-charge neutrality within the graphene monolayers on germanium and not dependent on the presence of an interface oxide. The interface roughness due to the facet structure of the Ge(100) epilayer, formed during the CVD growth of graphene, can be reduced via subsequent in situ annealing up to 850 °C coming along with an increase in the mobility by 30%. The formation of a Ge(100)-(2 × 1) structure demonstrates the weak interaction and effective delamination of graphene from the Ge/Si(100) substrate.
  •  
14.
  • Arya, N., et al. (författare)
  • Porosity-Engineered CNT-MoS2 Hybrid Nanostructures for Bipolar Supercapacitor Applications
  • 2023
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society. - 1944-8244 .- 1944-8252. ; 15:29, s. 34818-34828
  • Tidskriftsartikel (refereegranskat)abstract
    • Bipolar supercapacitors that can store many fold higher capacitance in negative voltage compared to positive voltage are of great importance if they can be engineered for practical applications. The electrode material encompassing high surface area, better electrochemical stability, high conductivity, moderate distribution of pore size, and their interaction with suitable electrolytes is imperative to enable bipolar supercapacitor performance. Apropos of the aforementioned aspects, the intent of this work is to ascertain the effect of ionic properties of different electrolytes on the electrochemical properties and performance of a porous CNT-MoS2 hybrid microstructure toward bipolar supercapacitor applications. The electrochemical assessment reveals that the CNT-MoS2 hybrid electrode exhibited a two- to threefold higher areal capacitance value of 122.3 mF cm-2 at 100 μA cm-2 in 1 M aqueous Na2SO4 and 42.13 mF cm-2 at 0.30 mA cm-2 in PVA-Na2SO4 gel electrolyte in the negative potential window in comparison to the positive potential window. The CNT-MoS2 hybrid demonstrates a splendid Coulombic efficiency of ∼102.5% and outstanding stability with capacitance retention showing a change from 100% to ∼180% over 7000 repeated charging-discharging cycles. © 2023 American Chemical Society.
  •  
15.
  • Assar, Alireza, et al. (författare)
  • Gettering in PolySi/SiOx Passivating Contacts Enables Si-Based Tandem Solar Cells with High Thermal and Contamination Resilience
  • 2022
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 14:12, s. 14342-14358
  • Tidskriftsartikel (refereegranskat)abstract
    • Multijunction solar cells in a tandem configuration could further lower the costs of electricity if crystalline Si (c-Si) is used as the bottom cell. However, for direct monolithic integration on c-Si, only a restricted number of top and bottom cell architectures are compatible, due to either epitaxy or high-temperature constraints, where the interface between subcells is subject to a trade-off between transmittance, electrical interconnection, and bottom cell degradation. Using polySi/SiOx passivating contacts for Si, this degradation can be largely circumvented by tuning the polySi/SiOx stacks to promote gettering of contaminants admitted into the Si bottom cell during the top cell synthesis. Applying this concept to the low-cost top cell chalcogenides Cu2ZnSnS4 (CZTS), CuGaSe2 (CGSe), and AgInGaSe2 (AIGSe), fabricated under harsh S or Se atmospheres above 550 degrees C, we show that increasing the heavily doped polySi layer thickness from 40 to up to 400 nm prevents a reduction in Si carrier lifetime by 1 order of magnitude, with final lifetimes above 500 mu s uniformly across areas up to 20 cm(2). In all cases, the increased resilience was correlated with a 99.9% reduction in contaminant concentration in the c-Si bulk, provided by the thick polySi layer, which acts as a buried gettering layer in the tandem structure without compromising the Si passivation quality. The Si resilience decreased as AIGSe > CGSe > CZTS, in accordance with the measured Cu contamination profiles and higher annealing temperatures. An efficiency of up to 7% was achieved for a CZTS/Si tandem, where the Si bottom cell is no longer the limiting factor.
  •  
16.
  • Athle, Robin, et al. (författare)
  • Effects of TiN Top Electrode Texturing on Ferroelectricity in Hf1-xZrxO2
  • 2021
  • Ingår i: ACS applied materials & interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 13:9, s. 11089-11095
  • Tidskriftsartikel (refereegranskat)abstract
    • Ferroelectric memories based on hafnium oxide are an attractive alternative to conventional memory technologies due to their scalability and energy efficiency. However, there are still many open questions regarding the optimal material stack and processing conditions for reliable device performance. Here, we report on the impact of the sputtering process conditions of the commonly used TiN top electrode on the ferroelectric properties of Hf1-xZrxO2. By manipulating the deposition pressure and chemistry, we control the preferential orientation of the TiN grains between (111) and (002). We observe that (111) textured TiN is superior to (002) texturing for achieving high remanent polarization (Pr). Furthermore, we find that additional nitrogen supply during TiN deposition leads to >5× greater endurance, possibly by limiting the scavenging of oxygen from the Hf1-xZrxO2 film. These results help explain the large Pr variation reported in the literature for Hf1-xZrxO2/TiN and highlights the necessity of tuning the top electrode of the ferroelectric stack for successful device implementation.
  •  
17.
  • Bangar, H., et al. (författare)
  • Large Spin-To-Charge Conversion at the Two-Dimensional Interface of Transition-Metal Dichalcogenides and Permalloy
  • 2022
  • Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 14:36, s. 41598-41604
  • Tidskriftsartikel (refereegranskat)abstract
    • Spin-to-charge conversion is an essential requirement for the implementation of spintronic devices. Recently, monolayers (MLs) of semiconducting transition-metal dichalcogenides (TMDs) have attracted considerable interest for spin-to-charge conversion due to their high spin-orbit coupling and lack of inversion symmetry in their crystal structure. However, reports of direct measurement of spin-to-charge conversion at TMD-based interfaces are very much limited. Here, we report on the room-temperature observation of a large spin-to-charge conversion arising from the interface of Ni80Fe20 (Py) and four distinct large-area (similar to 5 x 2 mm(2)) ML TMDs, namely, MoS2, MoSe2, WS2, and WSe2. We show that both spin mixing conductance and the Rashba efficiency parameter (lambda(IREE)) scale with the spin-orbit coupling strength of the ML TMD layers. The lambda(IREE) parameter is found to range between -0.54 and -0.76 nm for the four ML TMDs, demonstrating a large spin-to-charge conversion. Our findings reveal that the TMD/ferromagnet interface can be used for efficient generation and detection of spin current, opening new opportunities for novel spintronic devices.
  •  
18.
  • Belotcerkovtceva, Daria, et al. (författare)
  • Insights and Implications of Intricate Surface Charge Transfer and sp3-Defects in Graphene/Metal Oxide Interfaces
  • 2022
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 14:31, s. 36209-36216
  • Tidskriftsartikel (refereegranskat)abstract
    • Adherence of metal oxides to graphene is of fundamental significance to graphene nanoelectronic and spintronic interfaces. Titanium oxide and aluminum oxide are two widely used tunnel barriers in such devices, which offer optimum interface resistance and distinct interface conditions that govern transport parameters and device performance. Here, we reveal a fundamental difference in how these metal oxides interface with graphene through electrical transport measurements and Raman and photoelectron spectroscopies, combined with ab initio electronic structure calculations of such interfaces. While both oxide layers cause surface charge transfer induced p-type doping in graphene, in sharp contrast to TiOx, the AlOx/graphene interface shows the presence of appreciable sp3 defects. Electronic structure calculations disclose that significant p-type doping occurs due to a combination of sp3 bonds formed between C and O atoms at the interface and possible slightly off-stoichiometric defects of the aluminum oxide layer. Furthermore, the sp3 hybridization at the AlOx/graphene interface leads to distinct magnetic moments of unsaturated bonds, which not only explicates the widely observed low spin-lifetimes in AlOx barrier graphene spintronic devices but also suggests possibilities for new hybrid resistive switching and spin valves.
  •  
19.
  • Benedek, Peter, et al. (författare)
  • Quantifying Diffusion through Interfaces of Lithium-Ion Battery Active Materials
  • 2020
  • Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 12:14, s. 16243-16249
  • Tidskriftsartikel (refereegranskat)abstract
    • Detailed understanding of charge diffusion processes in a lithium-ion battery is crucial to enable its systematic improvement. Experimental investigation of diffusion at the interface between active particles and the electrolyte is challenging but warrants investigation as it can introduce resistances that, for example, limit the charge and discharge rates. Here, we show an approach to study diffusion at interfaces using muon spin spectroscopy. By performing measurements on LiFePO4 platelets with different sizes, we determine how diffusion through the LiFePO4 (010) interface differs from that in the center of the particle (i.e., bulk diffusion). We perform ab initio calculations to aid the understanding of the results and show the relevance of our interfacial diffusion measurement to electrochemical performance through cyclic voltammetry measurements. These results indicate that surface engineering can be used to improve the performance of lithium-ion batteries.
  •  
20.
  • Berglund, Linn, et al. (författare)
  • Seaweed-Derived Alginate–Cellulose Nanofiber Aerogel for Insulation Applications
  • 2021
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 13:29, s. 34899-34909
  • Tidskriftsartikel (refereegranskat)abstract
    • The next generation of green insulation materials is being developed to provide safer and more sustainable alternatives to conventional materials. Bio-based cellulose nanofiber (CNF) aerogels offer excellent thermal insulation properties; however, their high flammability restricts their application. In this study, the design concept for the development of a multifunctional and non-toxic insulation material is inspired by the natural composition of seaweed, comprising both alginate and cellulose. The approach includes three steps: first, CNFs were separated from alginate-rich seaweed to obtain a resource-efficient, fully bio-based, and inherently flame-retardant material; second, ice-templating, followed by freeze-drying, was employed to form an anisotropic aerogel for effective insulation; and finally, a simple crosslinking approach was applied to improve the flame-retardant behavior and stability. At a density of 0.015 g cm–3, the lightweight anisotropic aerogels displayed favorable mechanical properties, including a compressive modulus of 370 kPa, high thermal stability, low thermal conductivity (31.5 mW m–1 K–1), considerable flame retardancy (0.053 mm s–1), and self-extinguishing behavior, where the inherent characteristics were considerably improved by crosslinking. Different concentrations of the crosslinker altered the mechanical properties, while the anisotropic structure influenced the mechanical properties, combustion velocity, and to some extent thermal conductivity. Seaweed-derived aerogels possess intrinsic characteristics that could serve as a template for the future development of sustainable high-performance insulation materials. 
  •  
21.
  • Bi, Zhaoxia, et al. (författare)
  • Realization of Ultrahigh Quality InGaN Platelets to be Used as Relaxed Templates for Red Micro-LEDs
  • 2020
  • Ingår i: ACS Applied Materials and Interfaces. - : NLM (Medline). - 1944-8244 .- 1944-8252. ; 12:15, s. 17845-17851
  • Tidskriftsartikel (refereegranskat)abstract
    • In this work, arrays of predominantly relaxed InGaN platelets with indium contents of up to 18%, free from dislocations and offering a smooth top c-plane, are presented. The InGaN platelets are grown by metal-organic vapor phase epitaxy on a dome-like InGaN surface formed by chemical mechanical polishing of InGaN pyramids defined by 6 equivalent {101̅1} planes. The dome-like surface is flattened during growth, through the formation of bunched steps, which are terminated when reaching the inclined {101̅1} planes. The continued growth takes place on the flattened top c-plane with single bilayer surface steps initiated at the six corners between the c-plane and the inclined {101̅1} planes, leading to the formation of high-quality InGaN layers. The top c-plane of the as-formed InGaN platelets can be used as a high-quality template for red micro light-emitting diodes.
  •  
22.
  • Bianca, Gabriele, et al. (författare)
  • Liquid-Phase Exfoliated GeSe Nanoflakes for Photoelectrochemical-Type Photodetectors and Photoelectrochemical Water Splitting
  • 2020
  • Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 12:43, s. 48598-48613
  • Tidskriftsartikel (refereegranskat)abstract
    • Photoelectrochemical (PEC) systems represent powerful tools to convert electromagnetic radiation into chemical fuels and electricity. In this context, two-dimensional (2D) materials are attracting enormous interest as potential advanced photo(electro)catalysts and, recently, 2D group-IVA metal monochalcogenides have been theoretically predicted to be water splitting photocatalysts. In this work, we use density functional theory calculations to theoretically investigate the photocatalytic activity of single-/few-layer GeSe nanoflakes for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) in pH conditions ranging from 0 to 14. Our simulations show that GeSe nanoflakes with different thickness can be mixed in the form of nanoporous films to act as nanoscale tandem systems, in which the flakes, depending on their thickness, can operate as HER- and/or OER photocatalysts. On the basis of theoretical predictions, we report the first experimental characterization of the photo(electro)catalytic activity of single-/few-layer GeSe flakes in different aqueous media, ranging from acidic to alkaline solutions: 0.5 M H2SO4 (pH 0.3), 1 M KCl (pH 6.5), and 1 M KOH (pH 14). The films of the GeSe nanoflakes are fabricated by spray coating GeSe nanoflakes dispersion in 2-propanol obtained through liquid-phase exfoliation of synthesized orthorhombic (Pnma) GeSe bulk crystals. The PEC properties of the GeSe nanoflakes are used to design PEC-type photodetectors, reaching a responsivity of up to 0.32 AW(-1) (external quantum efficiency of 86.3%) under 455 nm excitation wavelength in acidic electrolyte. The obtained performances are superior to those of several self-powered and low-voltage solution-processed photodetectors, approaching that of self-powered commercial UV-Vis photodetectors. The obtained results inspire the use of 2D GeSe in proof-of-concept water photoelectrolysis cells.
  •  
23.
  • Blasi Romero, Anna, et al. (författare)
  • KR-12 derivatives endow nanocellulose with antibacterial and anti-inflammatory properties : Role of conjugation chemistry
  • 2023
  • Ingår i: ACS Applied Materials and Interfaces. - 1944-8244 .- 1944-8252. ; 15:20, s. 24186-24196
  • Tidskriftsartikel (refereegranskat)abstract
    • This work combines the wound-healing-related properties of the host defense peptide KR-12 with wood-derived cellulose nanofibrils (CNFs) to obtain bioactive materials, foreseen as a promising solution to treat chronic wounds. Amine coupling through carbodiimide chemistry, thiol-ene click chemistry, and Cu(I)-catalyzed azide-alkyne cycloaddition were investigated as methods to covalently immobilize KR-12 derivatives onto CNFs. The effects of different coupling chemistries on the bioactivity of the KR12-CNF conjugates were evaluated by assessing their antibacterial activities against Escherichia coli and Staphylococcus aureus. Potential cytotoxic effects and the capacity of the materials to modulate the inflammatory response of lipopolysaccharide (LPS)-stimulated RAW 245.6 macrophages were also investigated. The results show that KR-12 endowed CNFs with antibacterial activity against E. coli and exhibited anti-inflammatory properties and those conjugated by thiol-ene chemistry were the most bioactive. This finding is attributed to a favorable peptide conformation and accessibility (as shown by molecular dynamics simulations), driven by the selective chemistry and length of the linker in the conjugate. The results represent an advancement in the development of CNF-based materials for chronic wound care. This study provides new insights into the effect of the conjugation chemistry on the bioactivity of immobilized host defense peptides, which we believe to be of great value for the use of host defense peptides as therapeutic agents.
  •  
24.
  • Boda, Ulrika, et al. (författare)
  • Screen-Printed Corrosion-Resistant and Long-Term Stable Stretchable Electronics Based on AgAu Microflake Conductors
  • 2023
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society. - 1944-8244 .- 1944-8252. ; 15:9, s. 12372-
  • Tidskriftsartikel (refereegranskat)abstract
    • High-throughput production methods such as screen printing can bring stretchable electronics out of the lab into the market. Most stretchable conductor inks for screen printing are based on silver nanoparticles or flakes due to their favorable performance-to-cost ratio, but silver is prone to tarnishing and corrosion, thereby limiting the stability of such conductors. Here, we report on a cost-efficient and scalable approach to resolve this issue by developing screen printable inks based on silver flakes chemically coated by a thin layer of gold. The printed stretchable AgAu conductors reach a conductivity of 8500 S cm-1, remain conductive up to 250% strain, show excellent corrosion and tarnishing stability, and are used to demonstrate wearable LED and NFC circuits. The reported approach is attractive for smart clothing, as the long-term functionality of such devices is expected in a variety of environments. © 2023 The Authors.
  •  
25.
  • Boulanger, Nicolas, et al. (författare)
  • Enhanced Sorption of Radionuclides by Defect-Rich Graphene Oxide
  • 2020
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 12:40, s. 45122-45135
  • Tidskriftsartikel (refereegranskat)abstract
    • Extremely defect graphene oxide (dGO) is proposed as an advanced sorbent for treatment of radioactive waste and contaminated natural waters. dGO prepared using a modified Hummers oxidation procedure, starting from reduced graphene oxide (rGO) as a precursor, shows significantly higher sorption of U(VI), Am(III), and Eu(III) than standard graphene oxides (GOs). Earlier studies revealed the mechanism of radionuclide sorption related to defects in GO sheets. Therefore, explosive thermal exfoliation of graphite oxide was used to prepare rGO with a large number of defects and holes. Defects and holes are additionally introduced by Hummers oxidation of rGO, thus providing an extremely defect-rich material. Analysis of characterization by XPS, TGA, and FTIR shows that dGO oxygen functionalization is predominantly related to defects, such as flake edges and edge atoms of holes, whereas standard GO exhibits oxygen functional groups mostly on the planar surface. The high abundance of defects in dGO results in a 15-fold increase in sorption capacity of U(VI) compared to that in standard Hummers GO. The improved sorption capacity of dGO is related to abundant carboxylic group attached hole edge atoms of GO flakes as revealed by synchrotron-based extended X-ray absorption fine structure (EXAFS) and high-energy resolution fluorescence detected X-ray absorption near edge structure (HERFD-XANES) spectroscopy.
  •  
26.
  • Brett, Calvin, et al. (författare)
  • Nanocellulose-Assisted Thermally Induced Growth of Silver Nanoparticles for Optical Applications
  • 2021
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 13:23, s. 27696-27704
  • Tidskriftsartikel (refereegranskat)abstract
    • Optically responsive materials are present in everyday life, from screens to sensors. However, fabricating large-area, fossil-free materials for functional biocompatible applications is still a challenge today. Nanocelluloses from various sources, such as wood, can provide biocompatibility and are emerging candidates for templating organic optoelectronics. Silver (Ag) in its nanoscale form shows excellent optical properties. Herein, we combine both materials using thin-film large-area spray-coating to study the fabrication of optical response applications. We characterize the Ag nanoparticle formation by X-ray scattering and UV-vis spectroscopy in situ during growth on the nanocellulose template. The morphology and optical properties of the nanocellulose film are compared to the rigid reference surface SiO2. Our results clearly show the potential to tailor the energy band gap of the resulting hybrid material.
  •  
27.
  • Brodsky, Jan, et al. (författare)
  • Downsizing the Channel Length of Vertical Organic Electrochemical Transistors
  • 2023
  • Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 15:22, s. 27002-27009
  • Tidskriftsartikel (refereegranskat)abstract
    • Organic electrochemical transistors (OECTs) are promisingbuildingblocks for bioelectronic devices such as sensors and neural interfaces.While the majority of OECTs use simple planar geometry, there is interestin exploring how these devices operate with much shorter channelson the submicron scale. Here, we show a practical route toward theminimization of the channel length of the transistor using traditionalphotolithography, enabling large-scale utilization. We describe thefabrication of such transistors using two types of conducting polymers.First, commercial solution-processed poly-(dioxyethylenethiophene):poly-(styrenesulfonate), PEDOT:PSS. Next, we also exploit the short channel lengthto support easy in situ electropolymerization of poly-(dioxyethylenethiophene):tetrabutylammonium hexafluorophosphate, PEDOT:PF6. Both variantsshow different promising features, leading the way in terms of transconductance(g (m)), with the measured peak g (m) up to 68 mS for relatively thin (280 nm) channel layerson devices with the channel length of 350 nm and with widths of 50,100, and 200 & mu;m. This result suggests that the use of electropolymerizedsemiconductors, which can be easily customized, is viable with verticalgeometry, as uniform and thin layers can be created. Spin-coated PEDOT:PSSlags behind with the lower values of g (m); however, it excels in terms of the speed of the device and alsohas a comparably lower off current (300 nA), leading to unusuallyhigh on/off ratio, with values up to 8.6 x 10(4). Ourapproach to vertical gap devices is simple, scalable, and can be extendedto other applications where small electrochemical channels are desired.
  •  
28.
  • Brown, Rosemary, 1990, et al. (författare)
  • Unraveling the Surface Chemistry and Structure in Highly Active Sputtered Pt3Y Catalyst Films for the Oxygen Reduction Reaction
  • 2020
  • Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 12:4, s. 4454-4462
  • Tidskriftsartikel (refereegranskat)abstract
    • Platinum is the most widely used and best performing sole element for catalyzing the oxygen reduction reaction (ORR) in low-temperature fuel cells. Although recyclable, there is a need to reduce the amount used in current fuel cells for their extensive uptake in society. Alloying platinum with rare-earth elements such as yttrium can provide an increase in activity of more than seven times, reducing the amount of platinum and the total amount of catalyst material required for the ORR. As yttrium is easily oxidized, exposure of the Pt-Y catalyst layer to air causes the formation of an oxide layer that can be removed during acid treatment, leaving behind a highly active pure platinum overlayer. This paper presents an investigation of the overlayer composition and quality of Pt3Y films sputtered from an alloy target. The Pt3Y catalyst surface is investigated using synchrotron radiation X-ray photoelectron spectroscopy before and after acid treatment. A new substoichiometric oxide component is identified. The oxide layer extends into the alloy surface, and although it is not completely removed with acid treatment, the catalyst still achieves the expected high ORR activity. Other surface-sensitive techniques show that the sputtered films are smooth and bulk X-ray diffraction reveals many defects and high microstrain. Nevertheless, sputtered Pt3Y exhibits a very high activity regardless of the film's oxide content and imperfections, highlighting Pt3Y as a promising catalyst. The obtained results will help to support its integration into fuel cell systems.
  •  
29.
  • Cacovich, Stefania, et al. (författare)
  • Light-Induced Passivation in Triple Cation Mixed Halide Perovskites : Interplay between Transport Properties and Surface Chemistry.
  • 2020
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 12:31, s. 34784-34794
  • Tidskriftsartikel (refereegranskat)abstract
    • Mixed halide perovskites have attracted a strong interest in the photovoltaic community as a result of their high power conversion efficiency and the solid opportunity to realize low-cost and industry-scalable technology. Light soaking represents one of the most promising approaches to reduce non-radiative recombination processes and thus to optimize device performances. Here, we investigate the effects of 1 sun illumination on state-of-the-art triple cation halide perovskite thin films Cs0.05(MA0.14, FA0.86)0.95 Pb (I0.84, Br0.16)3 by a combined optical and chemical characterization. Competitive passivation and degradation effects on perovskite transport properties have been analyzed by spectrally and time-resolved quantitative imaging luminescence analysis and by X-ray photoemission spectroscopy (XPS). We notice a clear improvement of the optoelectronic properties of the material, with a increase of the quasi fermi level splitting and a corresponding decrease of methylammonium MA+ for short (up to 1 h) light soaking time. However, after 5 h of light soaking, phase segregation and in-depth oxygen penetration lead to a decrease of the charge mobility.
  •  
30.
  • Cai, Yunhao, et al. (författare)
  • Effect of the Energy Offset on the Charge Dynamics in Nonfullerene Organic Solar Cells
  • 2020
  • Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 12:39, s. 43984-43991
  • Tidskriftsartikel (refereegranskat)abstract
    • The energy offset, considered as the driving force for charge transfer between organic molecules, has significant effects on both charge separation and charge recombination in organic solar cells. Herein, we designed material systems with gradually shifting energy offsets, including both positive and negative values. Time-resolved spectroscopy was used to monitor the charge dynamics within the bulk heterojunction. It is striking to find that there is still charge transfer and charge generation when the energy offset reached -0.10 eV (ultraviolet photoelectron spectroscopy data). This work not only indicates the feasibility of the free carrier generation and the following charge separation under the condition of a negative offset but also elucidates the relationship between the charge transfer and the energy offset in the case of polymer chlorination.
  •  
31.
  • Calcagno, Giulio, 1990, et al. (författare)
  • Understanding the Operating Mechanism of Aqueous Pentyl Viologen/Bromide Redox-Enhanced Electrochemical Capacitors with Ordered Mesoporous Carbon Electrodes
  • 2022
  • Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 14:18, s. 20349-20357
  • Tidskriftsartikel (refereegranskat)abstract
    • Compared to traditional electric double-layer capacitors, redox-enhanced electrochemical capacitors (redox-ECs) show increased energy density and steadier power output thanks to the use of redox-active electrolytes. The aim of this study is to understand the electrochemical mechanisms of the aqueous pentyl viologen/bromide dual redox system at the interface of an ordered mesoporous carbon (CMK-8) and improve the device performance. Cells with CMK-8 carbon electrodes were investigated in several configurations using different charging rates and potential windows. The pentyl viologen electrochemistry shows a mixed behavior between solution-based diffusion and adsorption phenomena, with the reversible formation of an adsorbed layer. The extension of the voltage window allows for full reduction of the viologen molecules during charge and a consequent increase in the specific discharge energy delivered by the cell. Investigation of the mechanism indicates that a 1.5 V charging voltage with a 0.5 A g-1 charging rate and fast discharge rate produces the best overall performance.
  •  
32.
  • Cao, Cheng, et al. (författare)
  • Drug-Directed Morphology Changes in Polymerization-Induced Self-Assembly (PISA) Influence the Biological Behavior of Nanoparticles
  • 2020
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 12:27, s. 30221-30233
  • Tidskriftsartikel (refereegranskat)abstract
    • The effect of the hydrophobic block length on the morphologies of polymerization-induced self-assembled (PISA) nanoparticles is well understood. However, the influence of drug loading on the phase morphology of the nanoparticles during the PISA process, and the resulting biological function of PISA nanoparticles, has barely been investigated. In this work, we show that the addition of a drug, curcumin, during the PISA process shifts the phase diagram toward different morphologies. The PISA system was based on hydrophilic poly(2-(methacryloyloxy)ethylphosphorylcholine) (PMPC), which was chain extended with hydrophobic methyl methacrylate (MMA) in various concentrations of curcumin. According to transmission electron microscopy, the presence of curcumin led to the transition of, for example, worms to polymersome and micelles to worms analysis. To understand the interaction between polymer particles and drug, small-angle X-ray scattering (SAXS), small-angle neutron scattering (SANS), and fluorescence lifetime measurements were carried out. These measurements show that curcumin is predominantly located in the core in the case of micelles and worms while it is found in the shell of polymersomes. The change in morphology influences the cellular uptake by MCF-7 cells and the movement of the particles in multicellular cancer spheroids (3D model). With the increasing amount of drug, the cellular uptake of micelles and worms was enhanced with the increasing grafting density of MPC chains, which contrasts the decreasing cellular uptake in the higher drug-loaded polymersomes due to the lower shell hydration.
  •  
33.
  • Cao, Wei, et al. (författare)
  • Self-Assembly of Large Magnetic Nanoparticles in Ultrahigh Molecular Weight Linear Diblock Copolymer Films
  • 2020
  • Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 12:6, s. 7557-7564
  • Tidskriftsartikel (refereegranskat)abstract
    • The development of diblock copolymer (DBC) nanocomposite films containing magnetic nanoparticles (NPs) with diameters (D) over 20 nm is a challenging task. To host large iron oxide NPs (Fe3O4, D = 27 +/- 0.6 nm), an ultrahigh molecular weight (UHMW) linear DBC polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) is used as a template in the present work. Due to hydrogen bonding between the carboxylic acid ligands of the NPs and the ester groups in PMMA, the NPs show an affinity to the PMMA block. The localization of the NPs inside the DBC is investigated as a function of the NP concentration. At low NP concentrations, NPs are located preferentially at the interface between PS and PMMA domains to minimize the interfacial tension caused by the strong segregation strength of the UHMW DBC. At high NP concentrations (>= 10 wt %), chain-like NP aggregates (a head-to-tail orientation) are observed in the PMMA domains, resulting in a change of the morphology from sphere to ellipsoid for part of the PMMA domains. Magnetic properties of the hybrid films are probed via superconducting quantum interference device magnetometry. All hybrid films show ferrimagnetism and are promising for potential applications in magnetic data storage.
  •  
34.
  • Cao, Wei, et al. (författare)
  • Spray-Deposited Anisotropic Ferromagnetic Hybrid Polymer Films of PS-b-PMMA and Strontium Hexaferrite Magnetic Nanoplatelets
  • 2021
  • Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 13:1, s. 1592-1602
  • Tidskriftsartikel (refereegranskat)abstract
    • Spray deposition is a scalable and cost-effective technique for the fabrication of magnetic hybrid films containing diblock copolymers (DBCs) and magnetic nanoparticles. However, it is challenging to obtain spray-deposited anisotropic magnetic hybrid films without using external magnetic fields. In the present work, spray deposition is applied to prepare perpendicular anisotropic magnetic hybrid films by controlling the orientation of strontium hexaferrite nanoplatelets inside ultra-high-molecular-weight DBC polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) films. During spray deposition, the evolution of DBC morphology and the orientation of magnetic nanoplatelets are monitored with in situ grazing-incidence small-angle X-ray scattering (GISAXS). For reference, a pure DBC film without nanoplatelets is deposited with the same conditions. Solvent-controlled magnetic properties of the hybrid film are proven with solvent vapor annealing (SVA) applied to the final deposited magnetic films. Obvious changes in the DBC morphology and nanoplatelet localization are observed during SVA. The superconducting quantum interference device data show that ferromagnetic hybrid polymer films with high coercivity can be achieved via spray deposition. The hybrid films show a perpendicular magnetic anisotropy before SVA, which is strongly weakened after SVA. The spray-deposited hybrid films appear highly promising for potential applications in magnetic data storage and sensors.
  •  
35.
  • Cao, Xinrui, et al. (författare)
  • Spin Polarization-Induced Facile Dioxygen Activation in Boron-Doped Graphitic Carbon Nitride
  • 2020
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 12:47, s. 52741-52748
  • Tidskriftsartikel (refereegranskat)abstract
    • Dioxygen (O-2) activation is a vital step in many oxidation reactions, and a graphitic carbon nitride (g-C3N4) sheet is known as a famous semiconductor catalytic material. Here, we report that the atomic boron (B)-doped g-C3N4 (B/g-C3N4) can be used as a highly efficient catalyst for O-2 activation. Our first-principles results show that O-2 can be easily chemisorbed at the B site and thus can be highly activated, featured by an elongated O-O bond (similar to 1.52 angstrom). Interestingly, the O-O cleavage is almost barrier free at room temperatures, independent of the doping concentration. It is revealed that the B atom can induce considerable spin polarization on B/g-C3N4, which accounts for O-2 activation. The doping concentration determines the coupling configuration of net-spin and thus the magnitude of the magnetism. However, the distribution of net-spin at the active site is independent of the doping concentration, giving rise to the doping concentration-independent catalytic capacity. The unique monolayer geometry and the existing multiple active sites may facilitate the adsorption and activation of O-2 from two sides, and the newly generated surface oxygen-containing groups can catalyze the oxidation coupling of methane to ethane. The present findings pave a new way to design g-C3N4-based metal-free catalysts for oxidation reactions.
  •  
36.
  • Cao, Yuehan, et al. (författare)
  • Dual Functions of O-Atoms in the g-C3N4/BO0.2N0.8Interface : Oriented Charge Flow In-Plane and Separation within the Interface to Collectively Promote Photocatalytic Molecular Oxygen Activation
  • 2020
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 12:30, s. 34432-34440
  • Tidskriftsartikel (refereegranskat)abstract
    • The photocatalytic performance of two-dimensional materials is largely limited by the fast recombination of photogenerated charges. Herein, we design and fabricate a novel g-C3N4/BO0.2N0.8 van der Waals heterostructure to realize oriented charge flow in-plane and separation within the interface. On one hand, a B-C bond forms within the g-C3N4/BO0.2N0.8 interface after the introduction of O atoms. The B-C bond as the mediator bridges g-C3N4 and BO0.2N0.8 sides to enhance the effective separation of photogenerated charges. On the other hand, the existence of O atoms promotes the formation of a B-O-O-B intermediate to realize that molecular oxygen can directionally obtain electrons from the surface to generate O2-. As a result, BO0.2N0.8 instead of g-C3N4 is considered to be the main reaction side, and the energy barrier of NO3- generation is significantly decreased. The NO removal performance of g-C3N4/BO0.2N0.8 is enhanced and the NO2 generation is effectively controlled compared with that of g-C3N and g-C3N4/BN. This work could provide an effective and facile strategy to tune oriented charge transfer.
  •  
37.
  • Chang, Tingru, et al. (författare)
  • High-Resolution Microscopical Studies of Contact Killing Mechanisms on Copper-Based Surfaces
  • 2021
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 13:41, s. 49402-49413
  • Tidskriftsartikel (refereegranskat)abstract
    • The mechanisms of bacterial contact killing induced by Cu surfaces were explored through high-resolution studies based on combinations of the focused ion beam (FIB), scanning transmission electron microscopy (STEM), high-resolution TEM, and nanoscale Fourier transform infrared spectroscopy (nano-FTIR) microscopy of individual bacterial cells of Gram-positive Bacillus subtilis in direct contact with Cu metal and Cu5Zn5Al1Sn surfaces after high-touch corrosion conditions. This approach permitted subcellular information to be extracted from the bioinorganic interface between a single bacterium and Cu/Cu5Zn5Al1Sn surfaces after complete contact killing. Early stages of interaction between individual bacteria and the metal/alloy surfaces include cell leakage of extracellular polymeric substances (EPSs) from the bacterium and changes in the metal/alloy surface composition upon adherence of bacteria. Three key observations responsible for Cu-induced contact killing include cell membrane damage, formation of nanosized copper-containing particles within the bacteria cell, and intracellular copper redox reactions. Direct evidence of cell membrane damage was observed upon contact with both Cu metal and Cu5Zn5Al1Sn surfaces. Cell membrane damage permits copper to enter into the cell interior through two possible routes, as small fragmentized Cu2O particles from the corrosion product layer and/or as released copper ions. This results in the presence of intracellular copper oxide nanoparticles inside the cell. The nanosized particles consist primarily of CuO with smaller amounts of Cu2O. The existence of two oxidation states of copper suggests that intracellular redox reactions play an important role. The nanoparticle formation can be regarded as a detoxification process of copper, which immobilizes copper ions via transformation processes within the bacteria into poorly soluble or even insoluble nanosized Cu structures. Similarly, the formation of primarily Cu(II) oxide nanoparticles could be a possible way for the bacteria to deactivate the toxic effects induced by copper ions via conversion of Cu(I) to Cu(II).
  •  
38.
  • Chaudhary, Himanshu, et al. (författare)
  • Polyoxometalates as Effective Nano-inhibitors of Amyloid Aggregation of Pro-inflammatory S100A9 Protein Involved in Neurodegenerative Diseases
  • 2021
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 13:23, s. 26721-26734
  • Tidskriftsartikel (refereegranskat)abstract
    • Pro-inflammatory and amyloidogenic S100A9 protein is central to the amyloid-neuroinflammatory cascade in neurodegenerative diseases. Polyoxometalates (POMs) constitute a diverse group of nanomaterials, which showed potency in amyloid inhibition. Here, we have demonstrated that two selected nanosized niobium POMs, Nb10 and TiNb9, can act as potent inhibitors of S100A9 amyloid assembly. Kinetics analysis based on ThT fluorescence experiments showed that addition of either Nb10 or TiNb9 reduces the S100A9 amyloid formation rate and amyloid quantity. Atomic force microscopy imaging demonstrated the complete absence of long S100A9 amyloid fibrils at increasing concentrations of either POM and the presence of only round-shaped and slightly elongated aggregates. Molecular dynamics simulation revealed that both Nb10 and TiNb9 bind to native S100A9 homo-dimer by forming ionic interactions with the positively charged Lys residue-rich patches on the protein surface. The acrylamide quenching of intrinsic fluorescence showed that POM binding does not perturb the Trp 88 environment. The far and near UV circular dichroism revealed no large-scale perturbation of S100A9 secondary and tertiary structures upon POM binding. These indicate that POM binding involves only local conformational changes in the binding sites. By using intrinsic and 8-anilino-1-naphthalene sulfonate fluorescence titration experiments, we found that POMs bind to S100A9 with a Kd of ca. 2.5 μM. We suggest that the region, including Lys 50 to Lys 54 and characterized by high amyloid propensity, could be the key sequences involved in S1009 amyloid self-assembly. The inhibition and complete hindering of S100A9 amyloid pathways may be used in the therapeutic applications targeting the amyloid-neuroinflammatory cascade in neurodegenerative diseases.
  •  
39.
  • Chen, Guangyan, et al. (författare)
  • Engineering Active-Site-Induced Homogeneous Growth of Polydopamine Nanocontainers on Loading-Enhanced Ultrathin Graphene for Smart Self-Healing Anticorrosion Coatings
  • 2023
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 15:19, s. 23679-23689
  • Tidskriftsartikel (refereegranskat)abstract
    • Engineering nanocontainers with encapsulated inhibitors onto graphene has been an emerging technology for developing self-healing anticorrosion coatings. However, the loading contents of inhibitors are commonly limited by inhomogeneous nanostructures of graphene platforms. Here, we propose an activation-induced ultrathin graphene platform (UG-BP) with the homogeneous growth of polydopamine (PDA) nanocontainers encapsulated with benzotriazole (BTA). Ultrathin graphene prepared by catalytic exfoliation and etching activation provides an ideal platform with an ultrahigh specific surface area (1646.8 m2/g) and homogeneous active sites for the growth of PDA nanocontainers, which achieves a high loading content of inhibitors (40 wt %). The obtained UG-BP platform exhibits pH-sensitive corrosion inhibition effects due to its charged groups. The epoxy/UG-BP coating possesses integrated properties of enhanced mechanical properties (>94%), efficient pH-sensitive self-healing behaviors (98.5% healing efficiency over 7 days), and excellent anticorrosion performance (4.21 × 109 Ω·cm2 over 60 days), which stands out from previous related works. Moreover, the interfacial anticorrosion mechanism of UG-BP is revealed in detail, which can inhibit the oxidation of Fe2+ and promote the passivation of corrosion products by a dehydration process. This work provides a universal activation-induced strategy for developing loading-enhanced and tailor-made graphene platforms in extended smart systems and demonstrates a promising smart self-healing coating for advanced anticorrosion applications.
  •  
40.
  • Chen, Song, et al. (författare)
  • Inorganic Porous Bulk Discs as a Matrix for Thin-Layer Chromatography and Translucent Hard Composite Materials
  • 2020
  • Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 12:3, s. 3727-3735
  • Tidskriftsartikel (refereegranskat)abstract
    • Magnesium-stabilized amorphous calcium carbonate (Mg-ACC), amorphous magnesium calcium silicate hydrate (MCSH), and hydroxyapatite (HAp) are prepared by a precipitation method. By cold-pressing these particles, it is possible to produce porous bulk discs with a narrow pore size distribution. These porous inorganic discs (Mg-ACC, MCSH, and HAp) are investigated as stationary phases to study the chromatographic behavior and adsorption ability of rhodamine B, methylene blue, and ribonuclease. The adsorption affinities of different biomolecules can be easily observed and evaluated through this method. Furthermore, by infiltrating fabricated opaque porous discs with benzyl ether, which has a similar refractive index as the used inorganic particles (Mg-ACC, MCSH, and HAp), their optical properties significantly change and the discs become translucent. Moreover, by infiltrating the MCSH discs with a light-curing polymer, translucent composites with good surface hardness are fabricated. By doping particles with ions such as Ni2+, Co2+ , Fe3+, and Eu3+, the color and UV-visible spectrum of the bulk discs can be adjusted. Typically, by using iron-doped MCSH particles as the inorganic matrix, nanocomposites, which show a steep UV-absorption edge at 400 nm, are fabricated. Our work provides a simple and economical method to evaluate the affinity of biomolecules to inorganic materials and a novel way to fabricate translucent hard composite materials. The fabricated nanocomposite discs show a great UV shielding effect and superior surface hardness compared to polymethyl methacrylate and commercial sunglasses, suggesting their potential as new sunglass materials.
  •  
41.
  • Chen, Si, et al. (författare)
  • Unveiling Temperature-Induced Structural Domains and Movement of Oxygen Vacancies in SrTiO3 with Graphene
  • 2020
  • Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 12:47, s. 52915-52921
  • Tidskriftsartikel (refereegranskat)abstract
    • Heterointerfaces coupling complex oxides exhibit coexisting functional properties such as magnetism, superconductivity, and ferroelectricity, often absent in their individual constituent. SrTiO3 (STO), a canonical band insulator, is an active constituent of such heterointerfaces. Temperature-, strain-, or mechanical stress-induced ferroelastic transition leads to the formation of narrow domains and domain walls in STO. Such ferroelastic domain walls have been studied using imaging or transport techniques and, often, the findings are influenced by the choice and interaction of the electrodes with STO. In this work, we use graphene as a unique platform to unveil the movement of oxygen vacancies and ferroelastic domain walls near the STO surface by studying the temperature and gate bias dependence of charge transport in graphene. By sweeping the back gate voltage, we observe antihysteresis in graphene typically observed in conventional ferroelectric oxides. Interestingly, we find features in antihysteresis that are related to the movement of domain walls and of oxygen vacancies in STO. We ascertain this by analyzing the time dependence of the graphene square resistance at different temperatures and gate bias. Density functional calculations estimate the surface polarization and formation energies of layer-dependent oxygen vacancies in STO. This corroborates quantitatively with the activation energies determined from the temperature dependence of the graphene square resistance. Introduction of a hexagonal boron nitride (hBN) layer, of varying thicknesses, between graphene and STO leads to a gradual disappearance of the observed features, implying the influence of the domain walls onto the potential landscape in graphene.
  •  
42.
  • Chen, Wei, et al. (författare)
  • In situ Grazing-Incidence Small-Angle X-ray Scattering Observation of Gold Sputter Deposition on a PbS Quantum Dot Solid
  • 2020
  • Ingår i: ACS Applied Materials and Interfaces. - : NLM (Medline). - 1944-8244 .- 1944-8252. ; 12:41, s. 46942-46952
  • Tidskriftsartikel (refereegranskat)abstract
    • For PbS quantum dot (QD)-based optoelectronic devices, gold is the most frequently used electrode material. In most device architectures, gold is in direct contact with the QD solid. To better understand the formation of the interface between gold and a close-packed QD layer at an early stage, in situ grazing-incidence small-angle X-ray scattering is used to observe the gold sputter deposition on a 1,2-ethanedithiol (EDT)-treated PbS QD solid. In the kinetics of gold layer growth, the forming and merging of small gold clusters (radius less than 1.6 nm) are observed at the early stages. The thereby formed medium gold clusters (radius between 1.9-2.4 nm) are influenced by the QDs' templating effect. Furthermore, simulations suggest that the medium gold clusters grow preferably along the QDs' boundaries rather than as a top coating of the QDs. When the thickness of the sputtered gold layer reaches 6.25 nm, larger gold clusters with a radius of 5.3 nm form. Simultaneously, a percolation layer with a thickness of 2.5 nm is established underneath the gold clusters. This fundamental understanding of the QD-gold interface formation will help to control the implementation of sputtered gold electrodes on close-packed QD solids in device manufacturing processes.
  •  
43.
  • Chen, Yingying, et al. (författare)
  • Fluorenyl Indoline as an Efficient Electron Donor for Concerted Companion Dyes: Enhanced Light-Harvesting and Photocurrent
  • 2021
  • Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 13:42, s. 49828-49839
  • Tidskriftsartikel (refereegranskat)abstract
    • Concerted companion dyes (CC dyes) like XW61 have been demonstrated to be an effective platform for developing efficient DSSCs. However, the moderated phenothiazine-based electron donor in XW61 results in unsatisfactory J(sc). To address this problem, a stronger fluorenyl indoline-based electron donor has been used to construct porphyrin dye XW68 and organic dyes Y1-Y2. The stronger electron-donating character of the fluorenyl indoline unit leads to an enhanced J(sc) value (20.48 mA.cm(-2)) for the individual dye XW68. On this basis, CC dyes XW69-XW70-C8 have been designed and synthesized by combining the frameworks of Y1 and Y2 with XW68. The complementary absorption characters of the porphyrin and the organic dye moieties lead to panchromatic absorption with a strong light-harvesting capability from 350 to 700 nm and the onset wavelength extended to ca. 840 nm in the IPCE curves. As a result, excellent J(sc) values have been achieved (>22 mA.cm(-2)). In addition to the advantages of high J(sc), bulky octyl groups have been introduced into the donor of XW70-C8 to reduce dye aggregation and suppress charge recombination. Finally, a highest PCE of 11.1% with a satisfactory J(sc) (22.25 mA.cm(-2)) and an enhanced V-oc (750 mV) has been achieved upon coadsorption of XW70-C8 with CDCA. In addition, the CC dye XW70-C8-based solar cells exhibit excellent long-term photostability. These results provide an effective method for rationally improving the photovoltaic behavior, especially the J(sc) of CC dyes, by introducing strong electron donor moieties with suitable substituents.
  •  
44.
  • Chen, Yan-Ting, et al. (författare)
  • Biomimetic Platelet Nanomotors for Site-Specific Thrombolysis and Ischemic Injury Alleviation
  • 2023
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 15:27, s. 32967-32983
  • Tidskriftsartikel (refereegranskat)abstract
    •  Due to the mortality associated with thrombosis and its highrecurrence rate, there is a need to investigate antithrombotic approaches.Noninvasive site-specific thrombolysis is a current approach being used; however,its usage is characterized by the following limitations: low targeting efficiency, poorability to penetrate clots, rapid half-life, lack of vascular restoration mechanisms,and risk of thrombus recurrence that is comparable to that of traditionalpharmacological thrombolysis agents. Therefore, it is vital to develop an alternativetechnique that can overcome the aforementioned limitations. To this end, a cottonball-shaped platelet (PLT)-mimetic self-assembly framework engineered with aphototherapeutic poly(3,4-ethylenedioxythiophene) (PEDOT) platform has beendeveloped. This platform is capable of delivering a synthetic peptide derived fromhirudin P6 (P6) to thrombus lesions, forming P6@PEDOT@PLT nanomotors fornoninvasive site-specific thrombolysis, effective anticoagulation, and vascularrestoration. Regulated by P-selectin mediation, the P6@PEDOT@PLT nanomotors target the thrombus site and subsequentlyrupture under near-infrared (NIR) irradiation, achieving desirable sequential drug delivery. Furthermore, the movement ability ofthe P6@PEDOT@PLT nanomotors under NIR irradiation enables effective penetration deep into thrombus lesions, enhancingbioavailability. Biodistribution analyses have shown that the administered P6@PEDOT@PLT nanomotors exhibit extendedcirculation time and metabolic capabilities. In addition, the photothermal therapy/photoelectric therapy combination cansignificantly augment the effectiveness (ca. 72%) of thrombolysis. Consequently, the precisely delivered drug and the resultantphototherapeutic-driven heat-shock protein, immunomodulatory, anti-inflammatory, and inhibitory plasminogen activator inhibitor1 (PAI-1) activities can restore vessels and effectively prevent rethrombosis. The described biomimetic P6@PEDOT@PLTnanomotors represent a promising option for improving the efficacy of antithrombotic therapy in thrombus-related illnesses.
  •  
45.
  • Chen, Yongzhen, 1990-, et al. (författare)
  • Understanding Interface Dipoles at an Electron Transport Material/Electrode Modifier for Organic Electronics
  • 2021
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 13:39, s. 47218-47225
  • Tidskriftsartikel (refereegranskat)abstract
    • Interface dipoles formed at an electrolyte/electrode interface have been widely studied and interpreted using the "double dipole step" model, where the dipole vector is determined by the size and/or range of motion of the charged ions. Some electron transport materials (ETMs) with lone pairs of electrons on heteroatoms exhibit a similar interfacial behavior. However, the origin of the dipoles in such materials has not yet been explored in great depth. Herein, we systematically investigate the influence of the lone pair of electrons on the interface dipole through three pyridine derivatives B2-B4PyMPM. Experiments show that different positions of nitrogen atoms in the three materials give rise to different hydrogen bonds and molecular orientations, thereby affecting the areal density and direction of the lone pair of electrons. The interface dipoles of the three materials predicted by the "double dipole step" model are in good agreement with the ultraviolet photoelectron spectroscopy results both in spin-coated and vacuum-deposited films. These findings help to better understand the ETMs/electrode interfacial behaviors and provide new guidelines for the molecular design of the interlayer.
  •  
46.
  • Chen, Zhiwen, et al. (författare)
  • Integrated Design of Hierarchical CoSnO3@NC@MnO@NC Nanobox as Anode Material for Enhanced Lithium Storage Performance
  • 2020
  • Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 12:17, s. 19768-19777
  • Tidskriftsartikel (refereegranskat)abstract
    • Transition-metal oxides (TMOs) are potential candidates for anode materials of lithium-ion batteries (LIBs) due to their high theoretical capacity (similar to 1000 mA h/g) and enhanced safety from suppressing the formation of lithium dendrites. However, the poor electron conductivity and the large volume expansion during lithiation/delithiation processes are still the main hurdles for the practical usage of TMOs as anode materials. In this work, the CoSnO3@NC@ MnO@NC hierarchical nanobox (CNMN) is then proposed and fabricated to solve those issues. The as-prepared nanobox contains hollow cubic CoSnO3 as a core and dual N-doped carbon-"sandwiched" MnO particles as a shell. As anode materials of LIBs, the hollow and carbon interlayer structures effectively accommodate the volume expansion while dual active TMOs of CoSnO3 and Notably, the dual-layer structure of N-doped carbons plays a critical functional role MnO efficiently increase the specific capacity. in the incorporated composites, where the inner layer serves as a reaction substrate and a spatial barrier and the outer layer offers electron conductivity, enabling more effective involvement of active anode materials in lithium storage, as well as maintaining their high activity during lithium cycling. Subsequently, the as-prepared CNMN exhibits a high specific capacity of 1195 mA h/g after the 200th cycle at 0.1C and an excellent stable reversible capacity of about 876 mA h/g after the 300th cycle at 0.5C with only 0.07 mA h/g fade per cycle after 300 cycles. Even after a 250 times fast charging/discharging cycle both at SC, it still retains a reversible capacity of 422.6 mA h/g. We ascribe the enhanced lithium storage performances to the novel hierarchical architectures achieved from the rational design.
  •  
47.
  • Choi, Hyeon-Seo, et al. (författare)
  • Oriented Crystal Growth during Perovskite Surface Reconstruction
  • 2022
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 14:45, s. 51149-51156
  • Tidskriftsartikel (refereegranskat)abstract
    • Surface passivation has become a key strategy for an improvement in power conversion efficiency (PCE) of perovskite solar cells (PSCs) since PSCs experienced a steep increase in PCE and reached a comparably matured point. Recently, surface passivation using a mixed salt of fluorinated alkyl ammonium iodide and formamidinium bromide demon-strated a remarkable improvement in both performance and stability, which can be tuned by the length of the alkyl chain. Nevertheless, the role of the alkyl chain in manipulating surface-limited crystal growth was not fully understood, preventing a further progress in interface control. In this study, we found that the length of the fluorine-substituted alkyl chain governed the crystal formation dynamics by manipulating surface tensions of different crystal orientations. The overall enhancement of the (001) plane, being the most favored, commonly resulted from the surface reformation of the perovskite film regardless of the chain length, while the highly oriented (001) over (111) was monitored with a particular chain length. The enhanced crystal orientation during surface recrystallization was responsible for the low trap density and thus effectively suppressed charge recombination at the interface, resulting in a considerable increase in open-circuit voltage and fill factor.
  •  
48.
  • Cullari, Lucas Luciano, et al. (författare)
  • Trapped and Alone : Clay-Assisted Aqueous Graphene Dispersions
  • 2021
  • Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 13:5, s. 6879-6888
  • Tidskriftsartikel (refereegranskat)abstract
    • Dispersing graphene sheets in liquids, in particular water, could enhance the transport properties (like thermal conductivity) of the dispersion. Yet, such dispersions are difficult to achieve since graphene sheets are prone to aggregate and subsequently precipitate due to their strong van der Waals interactions. Conventional dispersion approaches, such as surface treatment of the sheets either by surfactant adsorption or by chemical modification, may prevent aggregation. Unfortunately, surfactant-assisted graphene dispersions are typically of low concentration (<0.2 wt %) with relatively small sheets (<1 mu m lateral size) while chemical modification is punished by increased defect density within the sheets. We investigate here a new approach in which the concentration of dispersed graphene in water is enhanced by the addition of a fibrous clay mineral, sepiolite. As we demonstrate, the clay particles in water form a kinetically arrested particle network within which the graphene sheets are effectively trapped. This mechanism keeps graphene sheets of high lateral size similar to 4 mu m) dispersed at high concentrations (similar to 1 wt %). We demonstrate the application of such dispersions as cooling liquids for thermal management solutions, where a 26% enhancement in the thermal conductivity is achieved as compared to that in a filler-free fluid.
  •  
49.
  • Dagar, Janardan, et al. (författare)
  • Compositional and Interfacial Engineering Yield High-Performance and Stable p-i-n Perovskite Solar Cells and Mini-Modules
  • 2021
  • Ingår i: ACS applied materials & interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 13:11, s. 13022-13033
  • Tidskriftsartikel (refereegranskat)abstract
    • Through the optimization of the perovskite precursor composition and interfaces to selective contacts, we achieved a p-i-n-type perovskite solar cell (PSC) with a 22.3% power conversion efficiency (PCE). This is a new performance record for a PSC with an absorber bandgap of 1.63 eV. We demonstrate that the high device performance originates from a synergy between (1) an improved perovskite absorber quality when introducing formamidinium chloride (FACl) as an additive in the "triple cation" Cs0.05FA0.79MA0.16PbBr0.51I2.49 (Cs-MAFA) perovskite precursor ink, (2) an increased open-circuit voltage, VOC, due to reduced recombination losses when using a lithium fluoride (LiF) interfacial buffer layer, and (3) high-quality hole-selective contacts with a self-assembled monolayer (SAM) of [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) on ITO electrodes. While all devices exhibit a high performance after fabrication, as determined from current-density voltage, J-V, measurements, substantial differences in device performance become apparent when considering longer-term stability data. A reduced long-term stability of devices with the introduction of a LiF interlayer is compensated for by using FACl as an additive in the metal-halide perovskite thin-film deposition. Optimized devices maintained about 80% of the initial average PCE during maximum power point (MPP) tracking for >700 h. We scaled the optimized device architecture to larger areas and achieved fully laser patterned series-interconnected mini-modules with a PCE of 19.4% for a 2.2 cm2 active area. A robust device architecture and reproducible deposition methods are fundamental for high performance and stable large-area single junction and tandem modules based on PSCs.
  •  
50.
  • Darabi, Sozan, 1994, et al. (författare)
  • Green Conducting Cellulose Yarns for Machine-Sewn Electronic Textiles
  • 2020
  • Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 12:50, s. 56403-56412
  • Tidskriftsartikel (refereegranskat)abstract
    • The emergence of "green"electronics is a response to the pressing global situation where conventional electronics contribute to resource depletion and a global build-up of waste. For wearable applications, green electronic textile (e-textile) materials present an opportunity to unobtrusively incorporate sensing, energy harvesting, and other functionality into the clothes we wear. Here, we demonstrate electrically conducting wood-based yarns produced by a roll-to-roll coating process with an ink based on the biocompatible polymer:polyelectrolyte complex poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS). The developed e-textile yarns display a, for cellulose yarns, record-high bulk conductivity of 36 Scm-1, which could be further increased to 181 Scm-1 by adding silver nanowires. The PEDOT:PSS-coated yarn could be machine washed at least five times without loss in conductivity. We demonstrate the electrochemical functionality of the yarn through incorporation into organic electrochemical transistors (OECTs). Moreover, by using a household sewing machine, we have manufactured an out-of-plane thermoelectric textile device, which can produce 0.2 μW at a temperature gradient of 37 K.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-50 av 291
Typ av publikation
tidskriftsartikel (287)
forskningsöversikt (4)
Typ av innehåll
refereegranskat (290)
övrigt vetenskapligt/konstnärligt (1)
Författare/redaktör
Roth, Stephan V. (14)
Schwartzkopf, Matthi ... (11)
Ahuja, Rajeev, 1965- (8)
Sun, Licheng, 1962- (7)
Müller, Christian, 1 ... (6)
Ågren, Hans (6)
visa fler...
Chen, Wei (6)
Berggren, Magnus (5)
Berglund, Lars, 1956 ... (5)
Gericke, Sabrina M. (4)
Pfaff, Sebastian (4)
Zetterberg, Johan (4)
Lundgren, Edvin (4)
Zheng, Kaibo (4)
Dutta, Joydeep, Prof ... (4)
Tybrandt, Klas (4)
Baryshnikov, Glib (4)
Strømme, Maria, 1970 ... (4)
Hahlin, Maria (4)
Slabon, Adam (3)
Fabiano, Simone (3)
Kloo, Lars (3)
Abdellah, Mohamed (3)
Rensmo, Håkan (3)
Vomiero, Alberto (3)
Moth-Poulsen, Kasper ... (3)
Oksman, Kristiina, 1 ... (3)
Edström, Kristina, P ... (3)
Yuan, Jiayin, 1979- (3)
Brett, Calvin (3)
Wågberg, Lars, 1956- (3)
Liu, Chang (3)
Ji, Xiaoyan (3)
Leifer, Klaus, 1965- (3)
Carosio, Federico (3)
Tian, Haining, 1983- (3)
An, Rong (3)
Dong, Yihui (3)
Boda, Ulrika (3)
Zhao, Xue (3)
Zhang, Rui (3)
Kuklin, Artem V. (3)
Zhang, Haibo (3)
Sun, Jianwu (3)
Tegenkamp, C. (3)
Gao, Feng (3)
Maibach, Julia (3)
Singh, Deobrat (3)
Shavorskiy, Andrey (3)
Kim, Nara (3)
visa färre...
Lärosäte
Uppsala universitet (82)
Kungliga Tekniska Högskolan (80)
Linköpings universitet (41)
Chalmers tekniska högskola (30)
Lunds universitet (29)
Stockholms universitet (26)
visa fler...
RISE (16)
Luleå tekniska universitet (15)
Karolinska Institutet (15)
Umeå universitet (7)
Göteborgs universitet (5)
Malmö universitet (5)
Linnéuniversitetet (4)
Mittuniversitetet (3)
Örebro universitet (2)
Karlstads universitet (2)
Sveriges Lantbruksuniversitet (2)
Jönköping University (1)
Högskolan i Borås (1)
Högskolan Dalarna (1)
visa färre...
Språk
Engelska (291)
Forskningsämne (UKÄ/SCB)
Naturvetenskap (225)
Teknik (76)
Medicin och hälsovetenskap (19)
Lantbruksvetenskap (1)

År

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy