| 1. |
-
14th NOLAMP Conference : The 14th Nordic Laser Materials Processing Conference, August 26th – 28th 2013, Gothenburg, Sweden
- 2013
-
Samlingsverk (redaktörskap) (övrigt vetenskapligt/konstnärligt)abstract
- Laser is a key element in obtaining a sustainable economy in Europe. Innovative laser processes will play a significant role in future green manufacturing as they provide a precise, well-controlled and highly effective energy deposition to the workpiece. Future challenges are to increase the spectrum of laser manufacturing technologies in all sectors where the laser can offer innovative product solutions, higher product quality, less environmental impact, higher productivity and in turn cost benefits.The NOLAMP conferences address all aspects of laser materials processing from fundamental science to industrial applications. The first NOLAMP conference took place in Oslo in 1987 in a period of intense development of the laser processes and their industrial applications. The NOLAMP has continued on a biannual cycle ever since, strengthening the Nordic laser community by encouraging knowledge transfer and networking. Now, 26 years later, in the forthcoming 14th NOLAMP, the research and development of processes like laser welding, laser hybrid welding, laser cutting and laser surface treatment is still very important, as well as the development of industrial applications and equipment for laser material processing. This time the NOLAMP Conference will be held in Gothenburg, Sweden. In this highly industrialized region of Sweden and with the close distance to Denmark, Norway and Finland, we hope to attract a strong participation from industry and the scientific community. On behalf of the Nordic laser community and Luleå University of Technology, it is our great pleasure to invite you to the 14th NOLAMP conference.
|
|
| 2. |
|
|
| 3. |
-
7 koncept för bättre ergonomi
- 2016
-
Samlingsverk (redaktörskap) (populärvet., debatt m.m.)abstract
- Fokus för ergonomi inom teknisk design är att se till att all design, oavsett vilket system det avser, kompletterar människans styrkor och förmågor. Vi ska kort och gott se till att arbetsuppgifter, utrustning, apparater, processer, miljöer och organisationer utformas med människan som utgångspunkt istället för att tvinga människan att anpassa sig med olika former av överbelastning som möjlig påföljd. För att uppnå det som kallas användarvänlighet behöver vi förstå och designa för den variation som vi människor representerar: vi är olika, vi har olika åldrar, storlek, styrka, kognitiv förmåga, tidigare erfarenheter, förväntningar och mål. Att tillämpa ergonomisk design betyder att studera hur människor interagerar med produkter, processer, miljöer och system för att förbättra dem, dvs. göra dem enklare, säkrare, bekvämare och effektivare att använda. För att kunna göra det behöver vi kunskap om människans förutsättningar och behov. Ergonomisk design kan exempelvis innebära: - Att designa produkter och utrustning som är enkla och tillförlitliga att använda med utgångspunkt i kunskap om kognitiv ergonomi, antropometri - och belastningsergonomiska analyser- Att designa säkra och effektiva tillverkningsprocesser med utgångspunkt i kunskap om kognitiv ergonomi och belastningsergonomiska analyser- Att designa organisationer utifrån kunskap om arbetslivsfysiologi och organisationsergonomi- Att designa arbetsuppgifter utifrån kunskap om kognitiv ergonomi, biomekanik och belastningsergonomiska analyserAtt designa enkla och användarvänliga gränssnitt med utgångspunkt i kognitiv ergonomiErgonomisk design av en produkt eller en arbetsmiljö kan exempelvis handla om att se till att produkten, systemet eller miljön inte bidrar till att människan använder kroppen på ett sätt som kan bidra till skador eller sjukskrivning. Det kan handla om att minimera fysisk belastning när en uppgift utförs eller att försäkra att den utförs på ett sätt som inte gör att skador uppstår. Det kan även handla om att se till att sensorisk input från olika system är utformad på ett sätt som upplevs som enkelt för användaren och därmed inte bidrar till mental belastning i form av stress. Det kan även handla om att designa organisationen eller hela produktionssystemet på ett sätt som utgår från användaren: människan i systemet. Med kunskaper om människans behov, preferenser, begränsningar, olikheter, erfarenheter och förmågor som utgångspunkt kan vi designa bättre lösningar. Det i sin tur bidrar till säkrare arbetsmiljöer, färre sjukskrivningar och användarvänligare produkter och system. Med mer kunskap kan vi uppnå att produkter, system och miljöer i vår omvärld fungera väl för människan – det är social och ekonomisk hållbar utveckling. Tvärvetenskap är ett begrepp som syftar på olika kunskaper, metoder och expertis från olika vetenskapsområden samverkar. Kursen Ergonomi II vid Luleå tekniska universitet är just tvärvetenskaplig, eftersom både innehåll och projekt i kursen omfattar kunskaper, metoder och tekniker från designvetenskap, hälsovetenskap och arbetsvetenskap. Lärarna i kursen var våren 2016 Daniel Öhrling som har förmedlat kunskap om design i allmänhet och prototypande som en designmetod i synnerhet, Agneta Larsson som har ansvarat för moment inom arbetslivsfysiologi, Ulrik Röijezon som ansvarat för momenten ergonomiska analyser och mätningar i rörelselabbet och Therese Öhrling som med stor kunskap och vilja att utveckla området ergonomisk design har ansvarat för ergonomi och arbetsvetenskap. I bokens första kapitel ges en inblick i belastningsergonomiska problem för målare. Måleriyrket omfattar många olika moment som ger belastning på handleder, rygg, axlar och nacke. I den inledande förstudien har Fanny Åkertröm och Hani Benjnouh fördjupat sig i målares vardag och därefter utvecklat två individuella koncept som syftar till att lösa de identifierade problemen. Lösningen blev två olika designkoncept som ska bidra till färre belastningsrelaterade sjukdomar. Den andra kontext som behandlas är frisöryrket. Frisörer arbetar ofta i arbetsställningar som kan bidra till belastningsergonomiska problem i nacke, rygg, axlar och handleder. Händerna befinner sig ofta i positioner som ger en hög belastning på kroppen. Gustaf Jörnelius, Linnea Stenman och Viktor Berglund har fördjupat sig i frisörers kontext och sedan utvecklat tre individuella designkoncept som kan bidra till bättre välmående för yrkesgrupppen. Joel Lantz och Christina Trång har tittat närmre på personer som arbetar med varuhantering. Denna yrkeskategori kan innebära belastningsergonomiska problem i och med lyft över huvudhöjd, sneda vinklingar i låga positioner och stäckningar i trånga lägen. Joel och Christina har sedan utvecklat två designkoncept som ska bidra till färre belastningsergonomiska skador.
|
|
| 4. |
- A., Trubetskaya, et al.
(författare)
-
The Effect of Wood Composition and Supercritical CO2 Extraction on the Charcoal Production
- 2019
-
Ingår i: 2019 AIChE Annual Meeting proceedings. - : American Institute of Chemical Engineers.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- This work demonstrated that the coupling of supercritical carbon dioxide extraction with slow pyrolysis is effective to remove over half of extractives from low quality wood and to generate biochar from remaining solid wood fractions. The high yields of extractives from supercritical carbon dioxide extraction illustrates the potential utilizing of low quality wood as an alternative feedstock for the sustainable production of value-added chemicals. Results showed that supercritical carbon dioxide extraction has neither a strong impact on the physical properties of original wood nor on the yield of solid biochar. These results are promising as they show that the biochar obtained for this renewable feedstock could be used as an alternative to fossil-based coke in applications including ferroalloy industries. Moreover, the heat treatment temperature and supercritical carbon dioxide extraction had a significant impact on the tar yields, leading to the increase in naphthalene, polycyclic aromatic hydrocarbons, aromatic and phenolic fractions with the greater temperature. The differences in gasification reactivity and dielectric properties of solid biochars, composition and yields of liquid products of non-treated pinewood and extracted wood fraction emphasize the impact of supercritical carbon dioxide extraction on the pyrolysis process.
|
|
| 5. |
- Aalipour, Mojgan
(författare)
-
Human Factors Approach for Maintenance Improvement
- 2015
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The purpose of this research work is to explore and describe human factors affectingmaintenance execution. To achieve the purpose of this study, the influencing factors have been identified using a literature survey. They have been categorized into four main groups namely organizational, workplace, job and individual factors. The Analytical Hierarchy Process (AHP) method is employed on data questionnaires to rank the priority of the factors. The interrelationships between these factors have been recognized by theInterpretive Structural Modelling (ISM) model. In the present case studies, MICMAC1analysis technique is also implemented for identifying the driving, dependent, linkage and autonomous factors. The data was collected through a questionnaire survey involving the participation of 16 and 25 maintenance staff and 10 mining experts in Swedish and Iranian mines, respectively. Within the study, it has been identified that the temperature, work layout, tools design and tools availability are the most important factors in both mines related to these categories. However, the significant factors in the organizational and individual categories are different in the selected mines. The effect of workplace factors on the maintainability of mining equipment is discussed and thereafter a methodology for maintainability management in the design and operation phases is developed. In the thirdcase study HEART2 is applied to estimate the probability of human error occurring duringmaintenance execution in an Iranian cable company. This research supports maintenance management to gain knowledge of human factors that affect maintenance execution. Further, this understanding could be useful in the development of strategies to improve the execution of maintenance.Keywords: Human Factors, Maintenance Management, Human Reliability, HumanPerformance, AHP, ISM, MICMAC, HEART
|
|
| 6. |
- Aalipour, Mojgan, et al.
(författare)
-
Human reliability assessment (HRA) in maintenance of production process : a case study
- 2016
-
Ingår i: International Journal of Systems Assurance Engineering and Management. - : Springer Science and Business Media LLC. - 0975-6809 .- 0976-4348. ; 7:2, s. 229-238
-
Tidskriftsartikel (refereegranskat)abstract
- Human reliability makes a considerable contribution to the maintenance performance, safety, and cost-efficiency of any production process. To improve human reliability, the causes of human errors should be identified and the probability of human errors should be quantified. Analysis of human error is very case-specific; the context of the field should be taken into account. The aim of this study is to identify the causes of human errors and improve human reliability in maintenance activities in the cable manufacturing industry. The central thrust of this paper is to employ the three most common HRA techniques—human error assessment and reduction technique, standardized plant analysis risk-human reliability, and Bayesian network—for estimating human error probabilities and then to check the consistency of the results obtained. The case study results demonstrated that the main causes of human error during maintenance activities are time pressure, lack of experience, and poor procedure. Moreover, the probabilities of human error, obtained by employing the three techniques, are similar and consistent
|
|
| 7. |
- Aalipour, Mojgan, et al.
(författare)
-
Identification of Factors affecting Human performance in Mining Maintenance tasks
- 2014
-
Ingår i: Proceedings of the 3rd international workshop and congress on eMaintenance. - Luleå : Luleå tekniska universitet. - 9789174399721 - 9789174399738 ; , s. 71-76
-
Konferensbidrag (refereegranskat)abstract
- This paper investigates the factors affecting humanperformance in maintenance task in mining sector. Theobjective is identify various factors and to classify them asdriving (strong driving power and weak dependence) anddependent factors (weak driving power and strongdependence). The factors were identified through literaturesurvey and are ranked using mean score of data questionnaire.The reliability of measures is pretested by applyingCronbach’s alpha coefficient to responses to a questionnairegiven to maintenance personnel. The interrelationshipsbetween human factors have been recognized by interpretivestructural modeling (ISM). Further, these factors have beenclassified using matrice d'impacts croises-multiplicationappliqué à un classement (MICMAC) analysing. This casestudy will figure out the factors affecting human performancefor deriving maintenance management insights to improveproductivity in the mining sector. Further, this understandingmay be helpful in framing the policies and strategies formining industry. Temperature, lighting, documentation,communication and fitness are driving factors. Moreover,Work layout, tools availability, complex tasks, time pressure,safety, boss decisions, training, fatigue and motivation havestrong driving power as well as high dependencies and itcomes under the category of linkage factors.
|
|
| 8. |
- Aalipour, Mojgan, et al.
(författare)
-
Work place factors effect on maintainability in challenging operating conditions
- 2015
-
Ingår i: 2015 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). - Piscataway, NJ : IEEE Communications Society. - 9781467380669 - 9781467380669 ; , s. 767-771
-
Konferensbidrag (refereegranskat)abstract
- Some industries such as mining industry create complex and challenging work place for maintenance crews. For example in an underground mine, for some machines, heavy maintenance tasks must be performed on site in a limited workspace in a harsh environment, including dust and improper illumination. Such operating conditions can increase the health, safety, and environment (HSE) risk, reduce the availability of the machines and increase the life cycle cost of equipment. A review of current mining equipment design and maintenance procedure confirms that considerable reduction in HSE risk, as well as substantial cost savings, can be achieved by considering human factors. This study discusses the effect of workplace factors on the maintainability of mining equipment. It presents the results from questionnaires on the effect of work place factors on maintainability performance given to maintenance staff at two mines, one in northern Sweden and the other in Iran.
|
|
| 9. |
|
|
| 10. |
- Aarrevaara, Timo, et al.
(författare)
-
Introduction
- 2014
-
Ingår i: Higher Education and Research in Academe. - Luleå : Luleå tekniska universitet. - 9789174399745 - 9789174399752 ; , s. 11-17
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)
|
|
| 11. |
- Aasa, Björn, et al.
(författare)
-
A characterisation of pain, disability, kinesiophobia and physical capacity in patients with predominantly peripherally mediated mechanical low back pain
- 2011
-
Ingår i: Physiotherapy. - 0031-9406 .- 1873-1465. ; 97:Suppl. 1, s. eS18-
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: The specific objectives were to: 1) describe the level of pain intensity, disability, activity limitation, kinesiophobia and physical capacity in patients with predominantly peripherally mediated mechanical back pain, and 2) investigate whether differences between these patients in physical and psychosocial factors can be distinguished when the patients are further sub-grouped.Relevance: To improve assessment among patients with chronic low back pain (CLBP) it is important to investigate the prevalence of physical and psychosocial features in homogenous sub-groups.Participants: Seventy-one patients with CLBP, 20-60 years old, with peripherally mediated mechanical pain at the the moment for the study, were included and each patient was sub-classified into one of five sub-groups based on their pain behaviour and functional movement pattern (flexion n=20, flexion/lateral shift, n=11, active extension n=23 , passive extension n=8, and multidirectional pattern n=9).Methods: Data on pain intensity (Visual Analogue Scale), disability (the Roland and Morris Questionnaire), activity limitation (the Patient Specific Functional Scale), kinesiophobia (the Tampa Scale of Kinesiophobia) and physical capacity (lifting capacity and trunk extensor endurance) was collected.Analysis: Mean and standard deviation for parametric and median and interquartile range for non-parametric data were used for descriptive statistics. One-way ANOVA for normally distributed data and Kruskal-Wallis for non-normally distributed data were used for analyses of differences between the sub-groups. The subjects were also divided into two age-groups (20-40 and 41-60 years) and measures of physical capacity were compared to women and men at the ages of 34 and 50, respectively, in the general Swedish population using one sample T-test.Results: The patients reported low to moderate pain intensity (3.1/10±2.4), disability (RMDQ (7.27/24 ±4.2) and kinesiophobia (33.4/68 ±7) and these levels were lower than reported levels in other studies including more heterogenous groups of patients with CLBP. The patiens reported activity limitations (PSFS 13/30±23). Lifting capacity and trunk extensor endurance were significantly lower than in the general population in the youngest age-group. No significant differences in pain intensity, disability, kinesiophobia or physical capacity were found between the sub-groups.Conclusions: This research highlights that patients with predominantly peripherally mediated mechanical back pain may differ from other sub-groups of patients with CLBP (e.g., patients with central sensitization as dominating pain mechanism) regarding physical and psychosocial factors. The individual variation in pain intensity, disability, kinesiophbia and physical capacity among the patients indicates the importance to assess these factors in every patient. Due to the fact that there were few patients in the sub-groups, further research is necessary to explore whether there are differences, that we were not able to disingjish, between patients with different movement patterns.
|
|
| 12. |
- Aasa, Björn, et al.
(författare)
-
Individualized low-load motor control exercises and education versus a high-load lifting exercise and education to improve activity, pain intensity, and physical performance in patients with low back pain : a randomized controlled trial
- 2015
-
Ingår i: Journal of Orthopaedic and Sports Physical Therapy. - : Journal of Orthopaedic & Sports Physical Therapy (JOSPT). - 0190-6011 .- 1938-1344. ; 45:2, s. 77-85
-
Tidskriftsartikel (refereegranskat)abstract
- Study Design Randomized controlled trial. Background Low back pain is a common disorder. Patients with low back pain frequently have aberrant and pain-provocative movement patterns that often are addressed with motor control exercises. Objective To compare the effects of low-load motor control (LMC) exercise and those of a high-load lifting (HLL) exercise. Methods Seventy participants with recurrent low back pain, who were diagnosed with nociceptive mechanical pain as their dominating pain pattern, were randomized to either LMC or HLL exercise treatments. Participants were offered 12 treatment sessions over an 8-week period. All participants were also provided with education regarding pain mechanisms. Methods Participants were assessed prior to and following treatment. The primary outcome measures were activity (the Patient-Specific Functional Scale) and average pain intensity over the last 7 days (visual analog scale). The secondary outcome measure was a physical performance test battery that included 1 strength, 3 endurance, and 7 movement control tests for the lumbopelvic region. Results Both interventions resulted in significant within-group improvements in pain intensity, strength, and endurance. The LMC group showed significantly greater improvement on the Patient-Specific Functional Scale (4.2 points) compared with the HLL group (2.5 points) (P<.001). There were no significant between-group differences in pain intensity (P = .505), strength, and 1 of the 3 endurance tests. However, the LMC group showed an increase (from 2.9 to 5.9) on the movement control test subscale, whereas the HLL group showed no change (from 3.9 to 3.1) (P<.001). Conclusion An LMC intervention may result in superior outcomes in activity, movement control, and muscle endurance compared to an HLL intervention, but not in pain intensity, strength, or endurance.
|
|
| 13. |
|
|
| 14. |
|
|
| 15. |
|
|
| 16. |
- Abbas, Nahlah, et al.
(författare)
-
Assessment of Climate Change Impact on Water Resources of Lesser Zab, Kurdistan, Iraq Using SWAT Model
- 2016
-
Ingår i: Engineering. - : Scientific Research Publishing, Inc.. - 1947-3931 .- 1947-394X. ; 8, s. 697-715
-
Tidskriftsartikel (refereegranskat)abstract
- Kurdistan in northern Iraq, a semi-arid region, predominantly a pastureland, is nourished by Lesser Zab, which is the second major tributary of Tigris River. The discharge in the tributary, in recent times, has been experiencing increasing variability contributing to more severe droughts and floods supposedly due to climate change. For a proper appreciation, SWAT model has been used to assess the impact of climate change on its hydrological components for a half-centennial lead time to 2046-2064 and a centennial lead time to 2080-2100. The suitability of the model was first evaluated, and then, outputs from six GCMs were incorporated to evaluate the impacts of climate change on water resources under three emission scenarios: A1B, A2 and B1. The results showed worsening water resources regime.
|
|
| 17. |
- Abbas, Nahlah, et al.
(författare)
-
Assessment of Climate Change Impacts on Water Resources of Al-Adhaim, Iraq Using SWAT Model
- 2016
-
Ingår i: Engineering. - : Scientific Research Publishing, Inc.. - 1947-3931 .- 1947-394X. ; 8, s. 716-732
-
Tidskriftsartikel (refereegranskat)abstract
- SWAT model (Sediment and Water Assessment Tool) was used to evaluate the impacts of climate change on water resources in Al-Adhaim Basin which is located in north east of Iraq. Al-Adhaim River is the main source of fresh water to Kirkuk City, one of the largest cities of Iraq. Recent studies have shown that blue and green waters of the basin have been manifesting increasing variability contributing to more severe droughts and floods apparently due to climate change. In order to gain greater appreciation of the impacts of climate change on water resources in the study area in near and distant future, SWAT (Soil and Water Assessment Tool) has been used. The model is first tested for its suitability in capturing the basin characteristics, and then, forecasts from six GCMs with about half-a-century lead time to 2046-2064 and one-century lead time to 2080-2100 are incorporated to evaluate the impacts of climate change on water resources under three emission scenarios: A2, A1B and B1. The results showed worsening water resources regime into the future.
|
|
| 18. |
- Abbas, Nahlah, et al.
(författare)
-
Assessment of climate change impacts on water resources of Khabour in Kurdistan , Iraq using SWAT model
- 2016
-
Ingår i: Journal of Environmental Hydrology. - 1058-3912 .- 1996-7918. ; 24, s. 1-21
-
Tidskriftsartikel (refereegranskat)abstract
- The Khabour River is one of five tributaries of Tigris River and the first river flows into Tigris River contributing to Tigris Flow by about 2 BCM at Zakho Station. The area of this catchment is 6,143 km2, of which 57% are located in Turkey and 43% in Iraq with a total length of 181 km. Khabour River is the main source of fresh water to Duhok City, one of the major cities of Kurdistan Region. Hydrometeorological data over the past several decades reveal that the catchment is experiencing increasing variability in precipitation and stream flow contributing to more severe droughts and floods presumably due to climate change. SWAT model was applied to capture the dynamics of the basin. The model was calibrated at Zakho station. The performance of the model was rather satisfactory; R2 and ENC were 0.5 and 0.51, respectively in calibration period. In validation process R2 and ENC were nearly consistent. In the next stage, six GCMs from CMIP3 namely, CGCM3.1/T47, CNRM-CM3, GFDL-CM2.1, IPSLCM4, MIROC3.2 (medres) and MRI CGCM2.3.2 were selected for climate change projections in the basin under a very high emissions scenario (A2), a medium emissions scenario (A1B) and a low emissions scenario (B1) for two future periods (2046-2064) and (2080-2100). All GCMs showed consistent increases in temperature and decreases in precipitation, and as expected, highest rate for A2 and lowest rate for B1. The projected temperatures and precipitation were input to the SWAT model to project water resources, and the model outputs were compared with the baseline period (1980-2010), the picture that emerged depicted deteriorating water resources variability.
|
|
| 19. |
- Abbas, Nahla, et al.
(författare)
-
Climate Change Impacts on Water Resources of Greater Zab River, Iraq
- 2016
-
Ingår i: Journal of Civil Engineering and Architecture. - : David Publishing Company. - 1934-7359 .- 1934-7367. ; 10:12, s. 1384-1402
-
Tidskriftsartikel (refereegranskat)abstract
- Greater Zab is the largest tributary of the Tigris River in Iraq where the catchment area is currently being plagued by water scarcity and pollution problems. Contemporary studies have revealed that blue and green waters of the basin have been manifesting increasing variability contributing to more severe droughts and floods apparently due to climate change. In order to gain greater appreciation of the impacts of climate change on water resources in the study area in near and distant future, SWAT (Soil and Water Assessment Tool) has been used. The model is first tested for its suitability in capturing the basin characteristics, and then, orecasts from six GCMs (general circulation models) with about half-a-century lead time to 2046~2064 and one-century lead time to 2080~2100 are incorporated to evaluate the impacts of climate change on water resources under three emission scenarios: A1B, A2 and B1. The results showed worsening water resources regime into the future.
|
|
| 20. |
- Abbas, Nahla, et al.
(författare)
-
Flow Variation of the Major Tributaries of Tigris River Due to Climate Change
- 2019
-
Ingår i: Engineering. - : Scientific Research Publishing. - 1947-3931 .- 1947-394X. ; 11:8, s. 437-442
-
Tidskriftsartikel (refereegranskat)abstract
- Iraq relies greatly on the flow of the Euphrates and Tigris Rivers and their tributaries. Five tributaries namely Khabour, Greater Zab, Lesser Zab, AlAd- hiam and Daylia, which are the major tributaries of Tigris River, sustain Northern Iraq Region, a semi-arid, mainly a pastureland. These tributaries contribute about 24 km3 of water annually. The discharge in the tributaries, in recent times, has been suffering increasing variability contributing to more severe droughts and floods apparently due to climate change. This is because there were no dams constructed outside Iraq previously. For an appropriate appreciation, Soil Water Assessment Tool (SWAT) model was used to evaluate the impact of climate change on their discharge for a half-centennial lead time to 2046-2064 and a centennial lead time to 2080-2100. The suitability of the model was first evaluated, and then, outputs from six GCMs were incorporated to evaluate the impacts of climate change on water resources under three emission scenarios: A1B, A2 and B1. The results showed that wa-ter resources are expected to decrease with time.
|
|
| 21. |
- Abbas, Nahla, et al.
(författare)
-
Impacts of Climate Change on Water Resources in Diyala River Basin, Iraq
- 2016
-
Ingår i: Journal of Civil Engineering and Architecture. - New York : David Publishing Company. - 1934-7359 .- 1934-7367. ; 10:9, s. 1059-1074
-
Tidskriftsartikel (refereegranskat)abstract
- Diyala River is the third largest tributary of the Tigris River running 445 km length and draining an area of 32,600 km2. The river is the major source of water supply for Diyala City for municipal, domestic, agriculture and other purposes. Diyala River Basin currently is suffering from water scarcity and contamination problems. Up-to-date studies have shown that blue and green waters of a basin have been demonstrating increasing variability contributing to more severe droughts and floods seemingly due to climate change. To obtain better understanding of the impacts of climate change on water resources in Diyala River Basin in near 2046~2064 and distant future 2080~2100, SWAT (soil and water assessment tool) was used. The model is first examined for its capability of capturing the basin characteristics, and then, projections from six GCMs (general circulation models) are incorporated to assess the impacts of climate change on water resources under three emission scenarios: A2, A1B and B1. The results showed deteriorating water resources regime into the future.
|
|
| 22. |
- Abbas, Nahlah, et al.
(författare)
-
Impacts of Climate Change on Water Resources of Greater Zab and Lesser Zab Basins, Iraq, Using Soil and Water Assessment Tool Model
- 2017
-
Ingår i: International Journal of Environmental, Chemical, Ecological, Geological and Geophysical Engineering. - : World Scientific and Engineering Academy and Society. - 2010-376X .- 2010-3778. ; 11:10, s. 823-829
-
Tidskriftsartikel (refereegranskat)abstract
- The Greater Zab and Lesser Zab are the major tributaries of Tigris River contributing the largest flow volumes into the river. The impacts of climate change on water resources in these basins have not been well addressed. To gain a better understanding of the effects of climate change on water resources of the study area in near future (2049-2069) as well as in distant future (2080-2099), Soil and Water Assessment Tool (SWAT) was applied. The model was first calibrated for the period from 1979 to 2004 to test its suitability in describing the hydrological processes in the basins. The SWAT model showed a good performance in simulating streamflow. The calibrated model was then used to evaluate the impacts of climate change on water resources. Six general circulation models (GCMs) from phase five of the Coupled Model Intercomparison Project (CMIP5) under three Representative Concentration Pathways (RCPs) RCP 2.6, RCP 4.5, and RCP 8.5 for periods of 2049-2069 and 2080-2099 were used to project the climate change impacts on these basins. The results demonstrated a significant decline in water resources availability in the future.
|
|
| 23. |
- Abbas, Nahla, et al.
(författare)
-
Model-Based Assessment of Climate Change Impact on Isaac River Catchment, Queensland
- 2016
-
Ingår i: Engineering. - : Scientific Research Publishing, Inc.. - 1947-3931 .- 1947-394X. ; 8:7, s. 460-470
-
Tidskriftsartikel (refereegranskat)abstract
- Isaac River catchment, which is located within Fitzroy basin in Central Queensland, Australia is mostly a semi-arid region, sparsely populated, but rife with economic activities such as mining, grazing, cropping and production forestry. Hydro-meteorological data over the past several decades reveal that the catchment is experiencing increasing variability in precipitation and streamflow contributing to more severe droughts and floods supposedly due to climate change. The exposure of the economic activities in the catchment to the vagaries of nature and the possible impacts of climate change on the stream flow regime are to be analyzed. For the purpose, SWAT model was adopted to capture the dynamics of the catchment. During calibration of the model 12parameters were found to be significant which yielded a R2 value of 0.73 for calibration and 0.66 for validation. In the next stage, six GCMs from CMIP3 namely, CGCM3.1/T47, CNRM-CM3, GFDLCM2.1, IPSLCM4, MIROC3.2 (medres) and MRI CGCM2.3.2 were selected for climate change projections in the Fitzroy basin under a very high emissions scenario (A2), a medium emissions scenario(A1B) and a low emissions scenario (B1) for two future periods (2046-2064) and (2080-2100). All GCMs showed consistent increases in temperature, and as expected, highest rate for A2 and lowest rate for B1. Precipitation predictions were mixed-reductions in A2 and increases in A1B and B1, and more variations in distant future compared to near future. When the projected temperaturesand precipitation were inputted into the SWAT model, and the model outputs were compared with the baseline period (1980-2010), the picture that emerged depicted worsening water resources variability.
|
|
| 24. |
- Abbas, Nahlah, et al.
(författare)
-
Recent Trends and Long-Range Forecasts of Water Resources of Northeast Iraq and Climate Change Adaptation Measures
- 2018
-
Ingår i: Water. - Switzerland : MDPI. - 2073-4441. ; 10:11, s. 1-19
-
Tidskriftsartikel (refereegranskat)abstract
- Iraq has been experiencing water resources scarcity, and is vulnerable to climate change. Analysis of historical data revealed that the region is experiencing climate change to a degree higher than generally reported elsewhere. The relationship between climate change and its effect on water resources of a region has been sparsely addressed in published literature. To fill that gap this research work first investigates if there has been a significant change in climate in the region, which has been found to be true. In the next stage, the research projects future climatic scenarios of the region based on six oft-used General CirculationModel (GCM) ensembles, namely CCSM4, CSIRO-Mk3.6.0, GFDL-ESM2M, MEROC5, HadGEM2-ES, and IPSL-CM5A-LR. The relationship between climate change and its impact on water resources is explored through the application of the popular, widely used SWAT model. The model depicts the availability of water resources, classified separately as blue and green waters, for near and distant futures for the region. Some of the findings are foreboding and warrants urgent attention of planners and decision makers. According to model outputs, the region may experience precipitation reduction of about 12.6% and 21% in near (2049–2069) and distant (2080–2099) futures, respectively under RCP8.5. Those figures under RCP4.5 are 15% and 23.4%, respectively and under RCP2.6 are 12.2% and 18.4%, respectively. As a consequence, the blue water may experience decreases of about 22.6% and 40% under RCP8.5, 25.8% and 46% under RCP4.5, and 34.4% and 31% under RCP2.6 during the periods 2049–2069 and 2080–2099, respectively. Green water, by contrast, may reduce by about 10.6% and 19.6% under RCP8.5, by about 14.8% and 19.4% under RCP4.5, and by about 15.8% and 14.2% under RCP2.6 during the periods 2049–2069 and 2080–2099, respectively. The research further investigates how the population are adapting to already changed climates and how they are expected to cope in the future when the shift in climate is expected to be much greater.
|
|
| 25. |
- Abbas, Nahla, et al.
(författare)
-
The Impacts of Climate Change on Fitzroy River Basin, Queensland, Australia
- 2017
-
Ingår i: Journal of Civil Engineering and Architecture. - USA : David Publishing Company. - 1934-7359 .- 1934-7367. ; 11:1, s. 38-47
-
Tidskriftsartikel (refereegranskat)abstract
- An analysis of historical data of Fitzroy River, which lies in the east coast of Australia, reveals that there is an increasing trend in extreme floods and droughts apparently attributable to increased variability of blue and green waters which could be due to climate change. In order to get a better understanding of the impacts of climate change on the water resources of the study area for near future as well as distant future, SWAT (soil and water assessment tool) model was applied. The model is first tested for its suitability in capturing the basin characteristics with available data, and then, forecasts from six GCMs (general circulation model) with about half-a-century lead time to 2046~2064 and about one-century lead time to 2080~2100 are incorporated to evaluate the impacts of climate change under three marker emission scenarios: A2, A1B and B1. The results showed worsening water resources regime into the future.
|
|
| 26. |
- Abbas, Nahla, et al.
(författare)
-
Water resources problems of Iraq: Climate change adaptation and mitigation
- 2018
-
Ingår i: Journal of Environmental Hydrology. - : International Association for Environmental Hydrology. - 1058-3912 .- 1996-7918. ; 26
-
Tidskriftsartikel (refereegranskat)abstract
- Iraq is suffering from water scarcity, and future predictions indicate that it could get worse due to changing climate. Arguably, climate change is one of the greatest challenges onfronting this region it could have significant adverse effects on water resources and hence the environment and economy, particularly in the agricultural sector. This study considers possible adaptation and mitigation measures that could be undertaken in response to climate change. To overcome this problem,adaptation measures at farm and government level were conferred. Farm-level adaptation comprises adopting crop modification, soil conservation, irrigation, changing crop calendar and planting of trees. The government role is to ensure success of these adaptation measures. The government should get involved and support the farmers financially and technologically.
|
|
| 27. |
- Abbas, Zainab Dekan, et al.
(författare)
-
Locating Dam Sites For Water Harvesting : Case Study Of Najaf Province, Iraq
- 2019
-
Ingår i: Journal of Environmental Hydrology. - Canada : The International Association of Environmental Hydrology. - 1058-3912 .- 1996-7918. ; 27, s. 1-8
-
Tidskriftsartikel (refereegranskat)abstract
- The Middle East is considered as an arid area. Iraq was an exception due to the presence of the Tigris and Euphrates Rivers. After 1970, the flow of these rivers started to decrease due to climate change and building of dams in the upper parts of the catchments of the rivers. Now, Iraq is experiencing water shortage problems. Rain water harvesting will definitely minimize the effect of water shortage problems. In this research an arid area was selected (al Najaf) to find out the best sites for water harvesting using GIS techniques. The good agreement between the results from a simple GIS model and observations in cases such as al Najaf Sea is indicating a promising future for GIS application in hydrological modeling. The present study proposed a function formula of estimating suitable dam site using existing geographic information map such as the digital elevation maps. It is expected that it will save time, cost and work force. Finally, through the contour map of the study area, the lowest three elevation values at the governorate level were observed (20, 40, 60m). Based on these values, three possibilities were suggested to select the dam sites.
|
|
| 28. |
- Abd-Ellah, Mahmoud Khaled, et al.
(författare)
-
A Review on Brain Tumor Diagnosis from MRI Images : Practical Implications, Key Achievements, and Lessons Learned
- 2019
-
Ingår i: Magnetic Resonance Imaging. - : Elsevier. - 0730-725X .- 1873-5894. ; 61, s. 300-318
-
Tidskriftsartikel (refereegranskat)abstract
- The successful early diagnosis of brain tumors plays a major role in improving the treatment outcomes and thus improving patient survival. Manually evaluating the numerous magnetic resonance imaging (MRI) images produced routinely in the clinic is a difficult process. Thus, there is a crucial need for computer-aided methods with better accuracy for early tumor diagnosis. Computer-aided brain tumor diagnosis from MRI images consists of tumor detection, segmentation, and classification processes. Over the past few years, many studies have focused on traditional or classical machine learning techniques for brain tumor diagnosis. Recently, interest has developed in using deep learning techniques for diagnosing brain tumors with better accuracy and robustness. This study presents a comprehensive review of traditional machine learning techniques and evolving deep learning techniques for brain tumor diagnosis. This review paper identifies the key achievements reflected in the performance measurement metrics of the applied algorithms in the three diagnosis processes. In addition, this study discusses the key findings and draws attention to the lessons learned as a roadmap for future research.
|
|
| 29. |
- Abd-Ellah, Mahmoud Khaled, et al.
(författare)
-
Classification of Brain Tumor MRIs Using a Kernel Support Vector Machine
- 2016
-
Ingår i: Building Sustainable Health Ecosystems. - Cham : Springer International Publishing. - 9783319446714 - 9783319446721 ; , s. 151-160
-
Konferensbidrag (refereegranskat)abstract
- The use of medical images has been continuously increasing, which makes manual investigations of every image a difficult task. This study focuses on classifying brain magnetic resonance images (MRIs) as normal, where a brain tumor is absent, or as abnormal, where a brain tumor is present. A hybrid intelligent system for automatic brain tumor detection and MRI classification is proposed. This system assists radiologists in interpreting the MRIs, improves the brain tumor diagnostic accuracy, and directs the focus toward the abnormal images only. The proposed computer-aided diagnosis (CAD) system consists of five steps: MRI preprocessing to remove the background noise, image segmentation by combining Otsu binarization and K-means clustering, feature extraction using the discrete wavelet transform (DWT) approach, and dimensionality reduction of the features by applying the principal component analysis (PCA) method. The major features were submitted to a kernel support vector machine (KSVM) for performing the MRI classification. The performance evaluation of the proposed system measured a maximum classification accuracy of 100 % using an available MRIs database. The processing time for all processes was recorded as 1.23 seconds. The obtained results have demonstrated the superiority of the proposed system.
|
|
| 30. |
- Abd-Ellah, Mahmoud Khaled, et al.
(författare)
-
Design and implementation of a computer-aided diagnosis system for brain tumor classification
- 2017
-
Ingår i: 2016 28th International Conference on Microelectronics (ICM). - 9781509057214 ; , s. 73-76
-
Konferensbidrag (refereegranskat)abstract
- Computer-aided diagnosis (CAD) systems have become very important for the medical diagnosis of brain tumors. The systems improve the diagnostic accuracy and reduce the required time. In this paper, a two-stage CAD system has been developed for automatic detection and classification of brain tumor through magnetic resonance images (MRIs). In the first stage, the system classifies brain tumor MRI into normal and abnormal images. In the second stage, the type of tumor is classified as benign (Noncancerous) or malignant (Cancerous) from the abnormal MRIs. The proposed CAD ensembles the following computational methods: MRI image segmentation by K-means clustering, feature extraction using discrete wavelet transform (DWT), feature reduction by applying principal component analysis (PCA). The two-stage classification has been conducted using a support vector machine (SVM). Performance evaluation of the proposed CAD has achieved promising results using a non-standard MRIs database.
|
|
| 31. |
- Abd-Ellah, Mahmoud Khaled, et al.
(författare)
-
Parallel Deep CNN Structure for Glioma Detection and Classification via Brain MRI Images
- 2019
-
Ingår i: IEEE-ICM 2019 CAIRO-EGYPT. - : IEEE. ; , s. 304-307
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Although most brain tumor diagnosis studies have focused on tumor segmentation and localization operations, few studies have focused on tumor detection as a time- and effort-saving process. This study introduces a new network structure for accurate glioma tumor detection and classification using two parallel deep convolutional neural networks (PDCNNs). The proposed structure is designed to identify the presence and absence of a brain tumor in MRI images and classify the type of tumor images as high-grade gliomas (HGGs, i.e., glioblastomas) or low-grade gliomas (LGGs). The introduced PDCNNs structure takes advantage of both global and local features extracted from the two parallel stages. The proposed structure is not only accurate but also efficient, as the convolutional layers are more accurate because they learn spatial features, and they are efficient in the testing phase since they reduce the number of weights, which reduces the memory usage and runtime. Simulation experiments were accomplished using an MRI dataset extracted from the BraTS 2017 database. The obtained results show that the proposed parallel network structure outperforms other detection and classification methods in the literature.
|
|
| 32. |
- Abd-Ellah, Mahmoud Khaled, et al.
(författare)
-
TPUAR-Net : Two Parallel U-Net with Asymmetric Residual-Based Deep Convolutional Neural Network for Brain Tumor Segmentation
- 2019
-
Ingår i: Image Analysis and Recognition. - Cham : Springer. ; , s. 106-116
-
Konferensbidrag (refereegranskat)abstract
- The utilization of different types of brain images has been expanding, which makes manually examining each image a labor-intensive task. This study introduces a brain tumor segmentation method that uses two parallel U-Net with an asymmetric residual-based deep convolutional neural network (TPUAR-Net). The proposed method is customized to segment high and low grade glioblastomas identified from magnetic resonance imaging (MRI) data. Varieties of these tumors can appear anywhere in the brain and may have practically any shape, contrast, or size. Thus, this study used deep learning techniques based on adaptive, high-efficiency neural networks in the proposed model structure. In this paper, several high-performance models based on convolutional neural networks (CNNs) have been examined. The proposed TPUAR-Net capitalizes on different levels of global and local features in the upper and lower paths of the proposed model structure. In addition, the proposed method is configured to use the skip connection between layers and residual units to accelerate the training and testing processes. The TPUAR-Net model provides promising segmentation accuracy using MRI images from the BRATS 2017 database, while its parallelized architecture considerably improves the execution speed. The results obtained in terms of Dice, sensitivity, and specificity metrics demonstrate that TPUAR-Net outperforms other methods and achieves the state-of-the-art performance for brain tumor segmentation.
|
|
| 33. |
- Abdel-Khalek, N.A., et al.
(författare)
-
Effect of starch type on selectivity of cationic flotation of iron ore
- 2012
-
Ingår i: Mineral Processing and Extractive Metallurgy. - 0371-9553 .- 1743-2855. ; 121:2, s. 98-102
-
Tidskriftsartikel (refereegranskat)abstract
- Cationic flotation is one of the most widely accepted technologies for upgrading siliceous iron ore using polysaccharides (mainly starches) as depressing agents for iron bearing minerals while floating silica with amines. In this paper, a group of starches are investigated as depressants for haematite. These starches are wheat, corn, rice, potato and dextrin. The role of starch type on the selectivity of the separation process has been studied through zeta potential, adsorption measurements as well as flotation tests. The effects of type of starch and pH of the medium have been studied. The results indicate that the selectivity of the separation process is strongly affected by the type of starch used, where better results are obtained with corn starch or wheat starch in comparison to the other types. Fourier transform infrared spectroscopy measurements indicated that the interaction between starches and haematite surface is intermolecular interaction.
|
|
| 34. |
- Abdelaziz, Ahmed, et al.
(författare)
-
Survey on network virtualization using openflow : Taxonomy, opportunities, and open issues
- 2016
-
Ingår i: KSII Transactions on Internet and Information Systems. - : Korean Society for Internet Information (KSII). - 1976-7277. ; 10:10, s. 4902-4932
-
Tidskriftsartikel (refereegranskat)abstract
- The popularity of network virtualization has recently regained considerable momentum because of the emergence of OpenFlow technology. It is essentially decouples a data plane from a control plane and promotes hardware programmability. Subsequently, OpenFlow facilitates the implementation of network virtualization. This study aims to provide an overview of different approaches to create a virtual network using OpenFlow technology. The paper also presents the OpenFlow components to compare conventional network architecture with OpenFlow network architecture, particularly in terms of the virtualization. A thematic OpenFlow network virtualization taxonomy is devised to categorize network virtualization approaches. Several testbeds that support OpenFlow network virtualization are discussed with case studies to show the capabilities of OpenFlow virtualization. Moreover, the advantages of popular OpenFlow controllers that are designed to enhance network virtualization is compared and analyzed. Finally, we present key research challenges that mainly focus on security, scalability, reliability, isolation, and monitoring in the OpenFlow virtual environment. Numerous potential directions to tackle the problems related to OpenFlow network virtualization are likewise discussed
|
|
| 35. |
- Abdelnasser, Amr, et al.
(författare)
-
REE geochemical characteristics and satellite-based mapping of hydrothermal alteration in Atud gold deposit, Egypt
- 2018
-
Ingår i: Journal of African Earth Sciences. - : Elsevier. - 0899-5362 .- 1464-343X. ; 145, s. 317-330
-
Tidskriftsartikel (refereegranskat)abstract
- New geochemical data of the hydrothermal alteration zones associated with gold-bearing quartz veins at Atud mine are used for better understanding the ore evolution and exploration vectoring. ASTER and Landsat 8 OLI data are used to elucidate the distribution of gold-associated alteration zones. Three alteration zones are defined; zone 1 (sericite-kaolinite-quartz-pyrite), zone 2 (quartz-sericite-albite-pyrite), and zone 3 (chlorite-carbonate-epidote ± pyrite). Sericite and hydrothermal quartz are confined to the mineralized quartz veins. Fe-OH and OH-bearing minerals are observed along NW- and NE-trending shear zones in the Main Atud mine. The association of gold-bearing quartz veins and sericite alteration is constrained by processing ASTER- and OLI-imagery data. The geochemical data of the ore-enveloping hydrothermally altered rocks are used to assess the behavior of the REEs during the mineralization process. Mild enrichment in LREE and significant enrichment in the HREE are associated with sericite in zones (1) and (2) alterations. Carbonate alteration (zone 3) is enriched in LREE and in immobile HREE. Moreover, LREE and Eu anomalies have negative correlated with the Alteration Index (A.I.) and K2O index (K.I.) in zones 1 and 2, suggesting high mobility of LREE in K-rich hydrothermal fluids. On the other hand, HREE anomalies with increasing MgO index (M.I.) in alteration zone 3 may imply low solubility of these elements in alkaline solutions. Au anomalies linked to sericite/silica alteration is a rather meaningful vector for further exploration in the area.
|
|
| 36. |
- Abdikalikova, Zamira, et al.
(författare)
-
Boundedness and compactness of the embedding between spaces with multiweighted derivatives when 1
- 2011
-
Ingår i: Czechoslovak Mathematical Journal. - : Institute of Mathematics, Czech Academy of Sciences. - 0011-4642 .- 1572-9141. ; 61:1, s. 7-26
-
Tidskriftsartikel (refereegranskat)abstract
- We consider a new Sobolev type function space called the space with multiweighted derivatives W-p(n),(alpha) over bar, where (alpha) over bar = (alpha(0), alpha(1), ......, alpha(n)), alpha(i) is an element of R, i = 0, 1,......,n, and parallel to f parallel to W-p(n),((alpha) over bar) = parallel to D((alpha) over bar)(n)f parallel to(p) + Sigma(n-1) (i=0) vertical bar D((alpha) over bar)(i)f(1)vertical bar, D((alpha) over bar)(0)f(t) = t(alpha 0) f(t), d((alpha) over bar)(i)f(t) = t(alpha i) d/dt D-(alpha) over bar(i-1) f(t), i = 1, 2, ....., n. We establish necessary and sufficient conditions for the boundedness and compactness of the embedding W-p,(alpha) over bar(n) -> W-q,(beta) over bar,(m) when 1 <= q < p < infinity, 0 <= m < n
|
|
| 37. |
- Abdollahpour, N., et al.
(författare)
-
An improving working condition system (health, safety and ergonomics) survey and analysis with macroergonomics approach in a manufacturing company from Iran Power Plant Industry in 2010
- 2013
-
Ingår i: Iran Occupational Health. - 1735-5133 .- 2228-7493. ; 10:4, s. 55-64
-
Tidskriftsartikel (refereegranskat)abstract
- Background and aims: World experience has shown the positive effect of applying ergonomics in improving work conditions, of quality and quantity of production, reducing prevalence of work-related musculoskeletal disorders, saving costs and increase of productivity in the different contents. These are possible only with utilizing properly improving work condition system and Macroergonomics approach. The aim of the study was how determine situation and analyzing the working conditions using the macroergonomics approach in a Power Plant Industry. Methods: This study is a cross-sectional study. First, the program for improvement of work conditions were evaluated using three questionnaires including managers viewpoint (29 samples), health, safety and environment employees viewpoint (5 samples) and operating workers viewpoint (85 samples) and then three other instruments of macroergonomics were used. Results: According to the results of 1) questionnaires and corresponding tests, three of the program's goals of improving working conditions and promotion practices that have the same opinions, but in some cases had different opinions. 2) Future workshops and interviews, the lack of participatory leadership and lack of collaborative work systems for the company stated. 3) Apply ergonomics checklist of ILO, an appropriate interaction between the top and bottom surfaces revealed. Conclusion: Awakened needs of change in the middle and lower levels of organization to solve problems relate to improving working conditions of the system was created. To implement an Ergonomics Intervention Programme Technique Process requires the full support management and employees.
|
|
| 38. |
- Abdollahpour, Nosrat, et al.
(författare)
-
Assessment of risk factors and the prevalence of musculoskeletal disorders by QEC and Body Map operational units of the gas refinery in Iran and its Meta-Reflection
- 2016
-
Ingår i: Journal of Health. - 2382-9710. ; 7:1, s. 35-50
-
Tidskriftsartikel (refereegranskat)abstract
- Introduction: This study aims to evaluate the risk factors and the prevalence of WMSDs disorders using QEC and Body Map techniques in operational units took a gas refineries and its Meta-Reflection.Method and Material: This case study assessed 254 operators in three distinct phases. First, 72 workstation posture was evaluated by using of QEC. Secondly was intended for employees of WMSDs were assessed using by Body Map. After conducting interview with relevant directors, the effectiveness of such studies has been analyzed through Meta-Reflection.Results: Based on results came from QEC survey, the operators’ average scores was %53/8. Moreover, results of Body Map assessment showed that the highest organs of WMSDs were back and knee extrusions (47% and 46% respectively). Also, lack of ergonomics policy and plan within refinery has demonstrated by interviews. Meta-Reflection, on the other hand, showed that because of incomplete learning cycles in the mentioned surveys which only provide WMSDs’ status, workstations’ ergonomics condition, and introduce expert based solutions. Thus, such surveys not only have incomplete study plan, but also have less impact on improving overall health, safety and ergonomics within this organization.Conclusion: This research proves that non-ergonomic conditions result in awkward postures and subsequent physical disorders. Overall, this study has showed a gap from this kind of the work on the learning cycles at organizational levels, a trend should be considered to interactive research work on the workplaces with improved and promoted system ergonomics attitude.
|
|
| 39. |
|
|
| 40. |
|
|
| 41. |
- Abdukalikova, Anara, et al.
(författare)
-
Detection of Atrial Fibrillation from Short ECGs : Minimalistic Complexity Analysis for Feature-Based Classifiers
- 2018
-
Ingår i: Computing in Cardiology 2018. - : IEEE.
-
Konferensbidrag (refereegranskat)abstract
- In order to facilitate data-driven solutions for early detection of atrial fibrillation (AF), the 2017 CinC conference challenge was devoted to automatic AF classification based on short ECG recordings. The proposed solutions concentrated on maximizing the classifiers F 1 score, whereas the complexity of the classifiers was not considered. However, we argue that this must be addressed as complexity places restrictions on the applicability of inexpensive devices for AF monitoring outside hospitals. Therefore, this study investigates the feasibility of complexity reduction by analyzing one of the solutions presented for the challenge.
|
|
| 42. |
- Abdul-Jalbar, Beatriz, et al.
(författare)
-
A new heuristic to solve the one-warehouse N-retailer problem
- 2010
-
Ingår i: Computers & Operations Research. - : Elsevier BV. - 0305-0548 .- 1873-765X. ; 37:2, s. 265-272
-
Tidskriftsartikel (refereegranskat)abstract
- We deal with a multi-echelon inventory system in which one warehouse supplies an item to multiple retailers. Customer demand arrives at each retailer at a constant rate. The retailers replenish their inventories from the warehouse that in turn orders from an outside supplier. It is assumed that shortages are not allowed and lead times are negligible. The goal is to determine replenishment policies that minimize the overall cost in the system. We develop a heuristic to compute efficient policies, which also can easily be used in a spreadsheet application. The main idea consists of finding a balance between the replenishment and the inventory holding costs at each installation. This new heuristic we compare with two other approaches proposed in the literature; the computational studies show that in most of the instances generated the new method provides lower costs.
|
|
| 43. |
|
|
| 44. |
- Abdulbaqi, Dana M., et al.
(författare)
-
Enhanced Oil Recovery (EOR) as a Stepping Stone to Carbon Capture and Sequestration (CCS)
- 2018
-
Ingår i: Mineral Economics. - : Springer. - 2191-2203 .- 2191-2211. ; 31:1-2, s. 239-251
-
Tidskriftsartikel (refereegranskat)abstract
- Environmental concerns about carbon emissions coupled with the oil industry’s need to secure additional CO2 for enhanced oil recovery (CO2-EOR) projects have sparked interest in the potential that CO2-EOR may have in jumpstarting carbon capture and sequestration (CCS). However, existing studies on the viability of coupling CO2-EOR with CCS have generally placed more focus on either the engineering or economic aspects of the problem. Most engineering studies focus on the technical aspects of the CO2-EOR project to produce the maximum amount of oil, while simultaneously storing the most CO2 during the production process with the economics as an afterthought, while most economic studies found have focused on a singular aspect of the issue such as impacts of exogenously varying injection rates. Furthermore, modelling efforts have stopped at the end of the productive life of the field. We build a unique two-stage dynamic optimization model, which simultaneously addresses engineering and economic policy aspects, to study the viability of coupling CO2-EOR transitioning into CCS. Our model includes a carbon tax for emissions, which becomes a subsidy for full scale sequestration after oil production has ceased; this allows us to explore the transition from CO2-EOR, our first stage, to sole CO2 sequestration in our second stage for a single field. We maximize the operator’s profits across both stages, while tracking the responsiveness of oil production and total carbon movements to both price and policy changes. We pair our optimization model with a reservoir simulation model, allowing us to mimic actual field behavior, giving our work a more realistic representation of both production and sequestration profiles. Our results suggest that small increases in the level of carbon tax can have large and discontinuous impacts on net sequestration. This stems from the observed transition from limited natural sources of CO2 to more expensive captured CO2 resulting from the implemented policy. With appropriate taxes, total volumes of captured CO2 sequestered across both stages are equivalent to 30 to 40% of the emissions from the use of the oil produced. With the credits oil producers receive from sequestering CO2, which equate to the tax, relatively high carbon taxes incentivize additional sequestration without significantly impacting the supply of oil. This, alongside maintaining a steady stream of profits, is a win-win situation for energy security and the climate.
|
|
| 45. |
- Abdullah, M Ailieen, et al.
(författare)
-
Building Networks for Delivering Integrated Product-Service Offerings (IPSOs)
- 2010
-
Ingår i: Industrial product-service systems -IPS². - Linköping : CIRP. - 9789173933810 - 9173933813
-
Konferensbidrag (refereegranskat)abstract
- The paper describes the effect of forming business networks and collaborations for the purpose of developing an Integrated Product-Service Offering (IPSO) using the Product/Service Systems (PSS). The research method is an in-depth case study of a joint venture formed by four companies developing a new technology for chemical extraction from water sludge waste within the pulp and paper industry.Combining literature from PSS, network theories and collaborative product development, this paper puts forward the benefits for SMEs to collaborate in business networks and produce IPSOs when introducing a new technology in an emerging market. The case study shows that working towards the new market would not have been possible if each party acted individually or maintained their traditional buyer-supplieroperator roles, and that IPSOs can reduce the business risk.
|
|
| 46. |
- Abdullah, Mukhalad, et al.
(författare)
-
Water Resources Projects : Large Storage Dams
- 2019
-
Ingår i: Journal of Earth Sciences and Geotechnical Engineering. - UK : Scientific Press International Limited. - 1792-9040 .- 1792-9660. ; 9:4, s. 109-135
-
Tidskriftsartikel (refereegranskat)abstract
- Several dams were built on Tigris, Euphrates, and Tigris tributaries in Iraq. The construction of dams had been done in the second half of 20th century. Of the most critical issues confronting the large storage dams in Iraq are the liquefactions in Mosul Dam foundations, land sliding and earthquake effects in Darbandikhan Dam, and the essential maintenance and rehabilitation requirements almost for all the dams. Absolutely, large storage dams made Iraq surviving from thirst in several occasions. Unfortunately, after 2003, the attention or will are not exist pertaining the building of new or partially built large dams.
|
|
| 47. |
- Abdullah, Mukhalad, et al.
(författare)
-
Water Resources Projects in Iraq : Irrigation Projects on Euphrates
- 2019
-
Ingår i: Journal of Earth Sciences and Geotechnical Engineering. - UK : Scientific Press International Limited. - 1792-9040 .- 1792-9660. ; 9:4, s. 169-199
-
Tidskriftsartikel (refereegranskat)abstract
- Euphrates River is distinguished with long existing irrigation projects, which had been developed in the 20th century after centuries of deterioration. One of the major projects a long Euphrates inside Iraq is Great Abu Ghraib Project, which is the largest reclaimed area. Also, Great Musayab Project, Kifl-Shinafiyah Project and Shinafiyah-Nasiriya Project are other major projects. The most important for which Hindiyah Barrage had been built is Hilla Branch that supply many projects on both sides of this branch. Euphrates irrigation projects need a lot of investments to develop the status of the projects and confront the continuous decrease in water quality of the river.
|
|
| 48. |
- Abdullah, Mukhalad, et al.
(författare)
-
Water Resources Projects in Iraq : Reservoirs in The Natural Depressions
- 2019
-
Ingår i: Journal of Earth Sciences and Geotechnical Engineering. - UK : Scientific Press International Limited. - 1792-9040 .- 1792-9660. ; 9:4, s. 137-152
-
Tidskriftsartikel (refereegranskat)abstract
- Iraq had suffered for centuries from devastating floods, causing heavy life and property losses and for occasions it demolished the civilizations. Since 1950s, Iraq started to develop several natural depressions to function as escape to mitigate flood waves. The projects of this kind which had developed are: Habbaniyah project, Tharthar project, Schweicha depression and Southern Marshes. The exploitation of these projects comprises building barrages, regulators, and dykes. For Tharthar and Habbaniyah, the diverted water re-used during drought season. Although, these depressions which serve as reservoirs provide invaluable role in flood protection, the construction of the existing and future dams will reduce the feasibility of these projects.
|
|
| 49. |
- Abdullah, Mukhalad, et al.
(författare)
-
Water Resources Projects in Iraq : Main Drains
- 2019
-
Ingår i: Journal of Earth Sciences and Geotechnical Engineering. - UK : Scientific Press International Limited. - 1792-9040 .- 1792-9660. ; 9:4, s. 275-281
-
Tidskriftsartikel (refereegranskat)abstract
- Iraq has a unique system of drainage. Soil texture, groundwater depth, water quality and other factors lead to the adaption of getting rid the drainage water away to the sea in order to control water quality. The system of drainage is not completed yet, however, the backbone of the system, which is Main Outfall Drain (MOD) was completed in 1992. Other main drains were completed and connected and others are still in progress of implementation where the most important drain after MOD is Eastern Euphrates Drain.
|
|
| 50. |
- Abdullah, Mukhalad, et al.
(författare)
-
Water Resources Projects in Iraq : Irrigation Projects on Tigris
- 2019
-
Ingår i: Journal of Earth Sciences and Geotechnical Engineering. - UK : Scientific Press International Limited. - 1792-9040 .- 1792-9660. ; 9:4, s. 201-230
-
Tidskriftsartikel (refereegranskat)abstract
- Along Tigris River reach inside Iraq, many large and small projects of irrigation were built. These projects depend on gravity flow or pumping. Starting from Jazeera project then small projects downstream Fatah, where these feed by pumping. After Samarra scheme, the important Ishaqi project, then after Baghdad, the projects of Nahrawan, Middle-Tigris and Dalmaj. The most important branch from Tigris is Gharraf Canal, which is not exploited yet, although plans were prepared decades ago. Downstream Kut Barrage, several projects are especially on the right side of Tigris. Finally, Shatt Al-Arab project which has a unique importance as it provide the solution for municipal need and save the orchards of dates in Basra.
|
|
