SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Axiotis M.) srt2:(2020-2023)"

Sökning: WFRF:(Axiotis M.) > (2020-2023)

  • Resultat 1-6 av 6
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Georgali, E., et al. (författare)
  • Experimental study of the 165Ho(n, 2n) reaction : Cross section measurements for the population of the 164Ho ground state and isomeric state from the threshold up to 20 MeV
  • 2020
  • Ingår i: Physical Review C. Nuclear Physics. - 0556-2813 .- 1089-490X. ; 102:3
  • Tidskriftsartikel (refereegranskat)abstract
    • In the present work the 165Ho(n,2n) reaction was studied experimentally and theoretically for the population of the ground state (Jπ=1+) of the 164Ho product nucleus, as well as for the population of its isomeric state (Eex=139.8 keV, Jπ=6−). The cross sections of both the ground and isomeric state channels were measured at energies near the reaction threshold (Eth=8.04 MeV), at 10.1, 10.4, and 10.7 MeV, as well as at energies higher than 17 MeV, at 17.1, 18.1, 19.0, and 19.6 MeV. The adopted method was the activation technique relative to the 197Au(n,2n) 196Au and 27Al(n,α)24Na reference reactions. The quasi-monoenergetic neutron beams for the near threshold energies were produced via the 2H(d,n)3He reaction, while for the neutron beams above 17 MeV the 3H(d,n)4He reaction was utilized. In both cases the deuteron beams were delivered by the 5.5 MV Tandem Van de Graaff accelerator of the Institute of Nuclear and Particle Physics at N.C.S.R. “Demokritos”. Additional to the experimental study, calculations were performed using the talys code (v. 1.9). The experimental data of the present work along with the previous measurements were compared with the talys results so as to investigate the reproduction of the experimental data for the different level density models of the code.
  •  
2.
  • Georgali, E., et al. (författare)
  • Cross-section measurements of the Dy-156(n, 2n)Dy-155 reaction at neutron energies higher than 17 MeV
  • 2021
  • Ingår i: Physical Review C. - : American Physical Society. - 2469-9985 .- 2469-9993. ; 104:6
  • Tidskriftsartikel (refereegranskat)abstract
    • In the present work the cross section of the 156Dy (n, 2n) 155Dy reaction (Eth = 9.51 MeV) was measured at neutron beam energies above 17 MeV: 17.1, 18.1, and 19.0 MeV. The irradiations were performed at the 5.5-MV tandem accelerator of the Institute of Nuclear and Particle Physics at N.C.S.R. "Demokritos", where quasimonoenergetic neutron beams were produced via the 3H (d, n) 4He reaction. The cross-section measurements were performed by means of the activation technique relative to the 27Al (n, alpha) 24Na reference reaction. Within the present work the experimental study is framed by theoretical calculations performed via the TALYS code (version 1.95).
  •  
3.
  • Georgali, E., et al. (författare)
  • Using GEANT4 Monte Carlo simulations to resolve low energy γ-ray spectra : The study of 164Hog+m decay using a broad energy HPGe detector
  • 2021
  • Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576. ; 985
  • Tidskriftsartikel (refereegranskat)abstract
    • Within the present work a peak analysis and unfolding method for low energy γ-ray spectroscopy is presented. This method can be used to facilitate the determination of the peak integral of a photopeak, when Ge X-ray escape peaks contaminate the latter and in parallel the source activity and the emission rate of the recorded photons which produce the escape peaks are unknown. It is based on extensive Monte Carlo simulations of the spectra by taking the full advantage of power and accuracy provided by the GEANT4 simulation toolkit.
  •  
4.
  • Maragkos, F., et al. (författare)
  • Differential cross-section measurements and R-Matrix calculations for proton elastic scattering on natMg in the energy range Ep,lab=2.70-4.25 MeV, suitable for EBS
  • 2023
  • Ingår i: Nuclear Instruments and Methods in Physics Research Section B. - : Elsevier. - 0168-583X .- 1872-9584. ; 536, s. 45-54
  • Tidskriftsartikel (refereegranskat)abstract
    • In the current work the first coherent set of differential cross section values for the natMg(p,p0)natMg elastic scattering covering the Ep,lab = 2700-4250 keV energy range is presented for 6 backscattering detection angles (120 degrees, 130 degrees, 140 degrees, 150 degrees, 160 degrees and 170 degrees). R-Matrix calculations were implemented using the AZURE 2.0 code [1] in an attempt to reproduce the obtained experimental data, whilst taking into account the 24Mg(p,p1)24Mg reaction channel. Both results are suitable for EBS and other IBA applications and, furthermore, they form a basis for a future expansion of the current SigmaCalc [2] evaluation, once more experimental data become available. The measurements were performed in the 5.5 MV TN11 HV Tandem Accelerator and the high precision goniometer of N.C.S.R. 'Demokritos', Athens, Greece. The experimental and data analysis procedures are presented in detail, along with the process behind the implementation of the R-Matrix calculations.
  •  
5.
  • Camplani, A., et al. (författare)
  • Intel Stratix 10 FPGA design for track reconstruction for the ATLAS experiment at the HL-LHC
  • 2023
  • Ingår i: Journal of Instrumentation. - : Institute of Physics Publishing (IOPP). - 1748-0221. ; 18:6
  • Tidskriftsartikel (refereegranskat)abstract
    • The fast reconstruction of charged particle tracks with high efficiency and track quality is an essential part of the online data selection for the ATLAS experiment at the High Luminosity LHC. Dedicated custom designed hardware boards and software simulations have been developed to assess the feasibility of a Hardware Tracking Trigger (HTT) system. The Pattern Recognition Mezzanine (PRM), as part of the HTT system, has been designed to recognize track candidates in silicon detectors with Associative Memory ASICs and to select and reconstruct tracks using linearized algorithms implemented in an Intel Stratix 10 MX FPGA. The highly parallelized FPGA design makes extensive use of the integrated High-Bandwidth-Memory.In this paper, the FPGA design for the PRM board is presented. Its functionalities have been verified in both simulations and hardware tests on an Intel Stratix 10 MX development kit.
  •  
6.
  • Tsavalas, P., et al. (författare)
  • Fuel retention and carbon deposition on beryllium marker tiles from JET tokamak main chamber limiters investigated by ion beam analysis
  • 2022
  • Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:12
  • Tidskriftsartikel (refereegranskat)abstract
    • The JET tokamak with the ITER-like wall is operated with arrays of castellated beryllium (Be) limiters in the main chamber. In several locations Be marker tiles were installed for erosion-deposition studies. The castellation sides and the plasma-facing surfaces (PFSs) of Be marker tiles from three different locations of the JET main chamber, from the experimental campaigns 2011-12 (ILW-1) and 2013-14 (ILW-2), were analysed, employing H-2 and He-3 micro-beams in order to determine carbon
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-6 av 6

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy