| 1. |
- Bölke, Kristofer, et al.
(författare)
-
Importance of the Penetration Depth and Mixing in the IRONARC Process
- 2018
-
Ingår i: ISIJ International. - : Iron and Steel Institute of Japan. - 0915-1559 .- 1347-5460. ; 58:7, s. 1210-1217
-
Tidskriftsartikel (refereegranskat)abstract
- One of the most important parameters for gas injection into liquid baths is the penetration depth of the gas into the bath. This is due to that it strongly influences the flow structure and hence the stirring and plume behavior in metallurgical processes. The IRONARC process is a new energy efficient process for reduction of iron oxide to produce pig iron. The future goal is to continuously scale up the process to an industrial scale from the current pilot scale. In this process, gas is injected horizontally through a submerged nozzle into a slag bath. Hence, the penetration depth is of great importance since it greatly affect several parameters in this process. Moreover, this information is essential when scaling up the reactor from a pilot scale to an industrial scale. In this work, the penetration depth of gas injection into water in a small scale side blown converter was studied numerically. Two different approaches with different multiphase models were tested, namely the Volume of Fluid (VOF) model and Eulerian multiphase model (EE). The penetration depth could be accurately determined for both numerical models, with a small expected deviation of 13.9% from the physical experiment results. Also, the simulation time was shorter for the Eulerian multiphase model. The penetration depth was then determined for the IRONARC pilot plant process. The results show that the plume is detached from the nozzle wall, which in turn results in a better energy usage of the gas along with a small refractory wear.
|
|
| 2. |
- Bölke, Kristofer, et al.
(författare)
-
Physical Modeling Study on the Mixing in the New IronArc Process
- 2018
-
Ingår i: Steel Research International. - : WILEY-V C H VERLAG GMBH. - 1611-3683 .- 1869-344X. ; 89:7
-
Tidskriftsartikel (refereegranskat)abstract
- IronArc is a newly developed technology for pig iron production with the aim to reduce the CO2 emission and energy consumption, compared to a conventional blast furnace route. In order to understand the fluid flow and stirring in the IronArc reactor, water modeling experiments are performed. Specifically, a down scaled acrylic plastic model of the IronArc pilot plant reactor is used to investigate the mixing phenomena and gas penetration depth in the liquid bath. The mixing time is determined by measuring the conductivity in the bath, after a sodium chloride solution is added. Moreover, the penetration depth is determined by analyzing the pictures obtained during the experimental process by using both a video camera and a high speed camera. The results show that the bath movements are strong and that a circular movement of the surface is present. The mixing in the model for the flow rate of 282 NLmin(-1) is fast. Specifically, the average mixing times are 7.6 and 10.2s for a 95% and a 99% homogenization degree, respectively. This is 15% and 18% (per degree of homogenization) faster compared to the case when using 3 gas inlets and the same flow rate.
|
|
