| 1. |
- Anjos, Eduardo V.P., et al.
(författare)
-
FORMAT: A Reconfigurable Tile-Based Antenna Array System for 5G and 6G Millimeter-Wave Testbeds
- 2022
-
Ingår i: IEEE Systems Journal. - 1932-8184 .- 1937-9234. ; 16:3, s. 4489-4500
-
Tidskriftsartikel (refereegranskat)abstract
- This article introduces the FORMAT array, a reconfigurable millimeter-wave antenna array platform based on antenna tiles. FORMAT stands for Flexible Organization and Reconfiguration of Millimeter-wave Antenna Tiles, which is a unique hardware solution aiming to implement and demonstrate a variety of antenna array concepts, as well as different array architectures and configurations from the same basic module, providing even benchmark between different solutions and thus valuable insights into fifth-generation (5G) and beyond-5G antenna systems. The combination of a minimum-sized tile with 3D-printed frame parts enables antenna arrays of a variety of sizes, allows multiple beamforming architectures, and a range of different antenna element positioning in the array. The hardware implementation is thoroughly described, with a few different array assemblies being manufactured and measured, validating their antenna performance with over-the-air measurements. Finally, using FORMAT hardware as both base station and user equipment, a 5-m wireless communication link was set up, achieving 4.8 Gbps downlink speed with QAM64 modulation.
|
|
| 2. |
- Elsakka, Amr, et al.
(författare)
-
A mm-Wave Phased-Array Fed Torus Reflector Antenna with ±30° Scan Range for Massive-MIMO Base-Station Applications
- 2022
-
Ingår i: IEEE Transactions on Antennas and Propagation. - 0018-926X .- 1558-2221. ; 70:5, s. 3398-3410
-
Tidskriftsartikel (refereegranskat)abstract
- A phased-array fed reflector antenna system is presented which can be used for mm-wave base station applications. The proposed system is designed to support massive-Multi-Input-Multi-Output (MIMO) scenarios within a wide coverage (±30°) in the azimuth plane and a limited coverage at the elevation plane. A design and characterization methodology has been established to optimize the system for the operation in various line-of-sight conditions by adopting the maximum-ratio-transmission (MRT) and zero-forcing (ZF) MIMO algorithms. A two-user MIMO case study has been considered for the evaluation of the key system performance metrics, i.e. the effective isotropic radiated power, power consumption, signal-to-noise-ratio (SNR), and signal-to-interference-plus-noise-ratio (SINR). This study demonstrates that the phased-array fed reflector concept has a major advantage over traditional direct-radiating phased array (DRPA) antennas to reduce energy consumption. In the present example, it requires 12–14 dB less transmitted power as compared to the MRT-beamformed DRPAs for the same SNR, and 26–27 dB less transmitted power relatively to ZF-beamformed DRPA systems for the same SINR. A prototype, employing a 55 cm diameter torus reflector and operating at 28 GHz-band, has been manufactured and tested. The measurement results agree well with simulations.
|
|
