| 1. |
- Gomis-Fons, Joaquin, et al.
(författare)
-
Optimal loading flow rate trajectory in monoclonal antibody capture chromatography
- 2021
-
Ingår i: Journal of Chromatography A. - : Elsevier BV. - 0021-9673 .- 1873-3778. ; 1635
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, we determined the optimal flow rate trajectory during the loading phase of a mAb capture column. For this purpose, a multi-objective function was used, consisting of productivity and resin utilization. Several general types of trajectories were considered, and the optimal Pareto points were obtained for all of them. In particular, the presented trajectories include a constant-flow loading process as a nominal approach, a stepwise trajectory, and a linear trajectory. Selected trajectories were then applied in experiments with the state-of-the-art protein A resin mAb Select PrismA (TM), running in batch mode on a standard single-column chromatography setup, and using both a purified mAb solution as well as a clarified supernatant. The results show that this simple approach, programming the volumetric flow rate according to either of the explored strategies, can improve the process economics by increasing productivity by up to 12% and resin utilization by up to 9% compared to a constant-flow process, while obtaining a yield higher than 99%. The productivity values were similar to the ones obtained in a multi column continuous process, and ranged from 0.23 to 0.35 mg/min/mL resin. Additionally, it is shown that a model calibration carried out at constant flow can be applied in the simulation and optimization of flow trajectories. The selected processes were scaled up to pilot scale and simulated to prove that even higher productivity and resin utilization can be achieved at larger scales, and therefore confirm that the trajectories are generalizable across process scales for this resin.
|
|
| 2. |
- Löfgren, Anton, et al.
(författare)
-
An integrated continuous downstream process with real-time control : A case study with periodic countercurrent chromatography and continuous virus inactivation
- 2021
-
Ingår i: Biotechnology and Bioengineering. - : Wiley. - 0006-3592 .- 1097-0290. ; 118:4, s. 1645-1657
-
Tidskriftsartikel (refereegranskat)abstract
- Integrated continuous downstream processes with process analytical technology offer a promising opportunity to reduce production costs and increase process flexibility and adaptability. In this case study, an integrated continuous process was used to purify a recombinant protein on laboratory scale in a two-system setup that can be used as a general downstream setup offering multiproduct and multipurpose manufacturing capabilities. The process consisted of continuous solvent/detergent virus inactivation followed by periodic countercurrent chromatography in the capture step, and a final chromatographic polishing step. A real-time controller was implemented to ensure stable operation by adapting the downstream process to external changes. A concentration disturbance was introduced to test the controller. After the disturbance was applied, the product output recovered within 6 h, showing the effectiveness of the controller. In a comparison of the process with and without the controller, the product output per cycle increased by 27%, the resin utilization increased from 71.4% to 87.9%, and the specific buffer consumption was decreased by 21% with the controller, while maintaining a similar yield and purity as in the process without the disturbance. In addition, the integrated continuous process outperformed the batch process, increasing the productivity by 95% and the yield by 28%.
|
|
| 3. |
- Löfgren, Anton, et al.
(författare)
-
An integrated continuous downstream process with real-time control: A case study with periodic countercurrent chromatography and continuous virus inactivation
- 2021
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Integrated continuous downstream processes with process analytical technology offer a promising opportunity to reduce production costs and increase process flexibility and adaptability. In this case study, an integrated continuous process was used to purify a recombinant protein on laboratory scale in a two-system setup that can be used as a general downstream setup offering multi-product and multi-purpose manufacturing capabilities. The process consisted of continuous solvent/detergent virus inactivation followed by periodic countercurrent chromatography in the capture step, and a final chromatographic polishing step. A real-time controller was implemented to ensure stable operation by adapting the downstream process to external changes. A concentration disturbance was introduced to test the controller. After the disturbance was applied, the product output recovered within 6 hours, showing the effectiveness of the controller. In a comparison of the process with and without the controller, the product output per cycle increased by 27%, the resin utilization increased from 71.4% to 87.9%, and the specific buffer consumption was decreased by 21% with the controller, while maintaining a similar yield and purity as in the process without the disturbance. In addition, the integrated continuous process outperformed the batch process, increasing the productivity by 95% and the yield by 28%.
|
|
