| 1. |
- Kumari, Sulakshna, et al.
(författare)
-
Integration of GaAs-based VCSEL array on SiN platform with HCG reflectors for WDM applications
- 2015
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. - 9781628414622 ; 9372, s. Art. no. 93720U-
-
Konferensbidrag (refereegranskat)abstract
- We present a GaAs-based VCSEL structure, BCB bonded to a Si3N4 waveguide circuit, where one DBR is substituted by a free-standing Si3N4 high-contrast-grating (HCG) reflector realized in the Si3N4 waveguide layer. This design enables solutions for on-chip spectroscopic sensing, and the dense integration of 850-nm WDM data communication transmitters where individual channel wavelengths are set by varying the HCG parameters. RCWA shows that a 300nm-thick Si3N4 HCG with 800nm period and 40% duty cycle reflects strongly (
|
|
| 2. |
- Haglund, Erik, 1985, et al.
(författare)
-
30 GHz bandwidth 850 nm VCSEL with sub-100 fJ/bit energy dissipation at 25-50 Gbit/s
- 2015
-
Ingår i: Electronics Letters. - : Institution of Engineering and Technology (IET). - 1350-911X .- 0013-5194. ; 51:14, s. 1096-1097
-
Tidskriftsartikel (refereegranskat)abstract
- A high-speed and energy-efficient oxide-confined 850 nm vertical-cavity surface-emitting laser (VCSEL) for optical interconnects is presented. A record-high modulation bandwidth of 30 GHz is reached for a 3.5 mu m oxide aperture VCSEL, with 25 GHz bandwidth already at a bias current of 1.8 mA. The high bandwidth at low currents enables energy-efficient transmission with a dissipated heat energy in the VCSEL of
|
|
| 3. |
|
|
| 4. |
- Larsson, Anders, 1957, et al.
(författare)
-
High Speed VCSELs and VCSEL Arrays for Single and Multicore Fiber Interconnects
- 2015
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 0277-786X .- 1996-756X. - 9781628414714 ; 9381, s. Art. no. 93810D-
-
Konferensbidrag (refereegranskat)abstract
- Our recent work on high speed 850 nm VCSELs and VCSEL arrays is reviewed. With a modulation bandwidth approaching 30 GHz, our VCSELs have enabled transmitters and links operating at data rates in excess of 70 Gbps (at IBM) and transmission over onboard polymer waveguides at 40 Gbps ( at University of Cambridge). VCSELs with an integrated mode filter for single mode emission have enabled transmission at 25 Gbps over > 1 km of multimode fiber and a speed-distance product of 40 Gbps . km. Dense VCSEL arrays for multicore fiber interconnects have demonstrated 240 Gbps aggregate capacity with excellent uniformity and low crosstalk between the 40 Gbps channels.
|
|
| 5. |
- Haglund, Emanuel, 1988, et al.
(författare)
-
Impact of Damping on High-Speed Large Signal VCSEL Dynamics
- 2015
-
Ingår i: Journal of Lightwave Technology. - 0733-8724 .- 1558-2213. ; 33:4, s. 795 - 801
-
Tidskriftsartikel (refereegranskat)abstract
- An investigation of the optimal relaxation oscillation damping for high-speed 850-nm vertical-cavity surface-emitting laser (VCSEL) under large signal operation is presented, using devices with K-factors ranging from 0.1 to 0.4 ns. Time-domain measurements of turn-on transients are used to quantify damping dependent rise times, overshoots, and signal amplitudes. Optical eye diagrams together with timing jitter and bit error rate measurements reveal a tradeoff between the rise time and the duration of the relaxation oscillations. To produce a high-quality eye at a specific data rate, a proper amount of damping is needed to simultaneously obtain sufficiently high bandwidth and low timing jitter. We found that for error-free transmission, a VCSEL with a 0.3 ns K-factor achieved the best receiver sensitivity at 10 and 25 Gb/s, whereas a less damped VCSEL with a 0.2 ns K-factor achieved the best sensitivity at 40 Gb/s.
|
|
| 6. |
- Haglund, Emanuel, 1988, et al.
(författare)
-
Silicon-Integrated 850-nm Hybrid-Cavity VCSEL
- 2015
-
Ingår i: Optics and Photonics in Sweden, 28-29 Oct. 2015.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Silicon photonics is a promising energy-efficient and cost-effective platform for optical integrated circuits. However, due to its indirect bandgap silicon cannot be used to produce effective light sources. An attractive solution to this is heterogeneous integration of the GaAs-based vertical-cavity surface-emitting laser (VCSEL) on silicon. The GaAs-based VCSEL has proven to be both high-speed and energy efficient, with data rates above 70 Gb/s and less than 100 fJ/bit dissipated power up to 50 Gb/s.By employing ultra-thin divinylsiloxane-is-benzocyclobutene (DVS-BCB) adhesive bonding a GaAs-based “half-VCSEL” with a gain region and a top distributed Bragg Reflector (DBR) has been attached to a dielectric DBR on silicon. This creates a hybrid cavity where the standing-wave optical field is extending into both the silicon and GaAs-based parts of the cavity.The hybrid-cavity may eventually enable light to be tapped off to an in-plane waveguide, e.g. using a high contrast grating (HCG) instead of the bottom DBR. Replacing the whole bottom DBR with an HCG also gives the possibility to set the wavelength according to the grating parameters, enabling fabrication of multi-wavelength VCSEL arrays that together with integrated wavelength multiplexers could form 850-nm wavelength division multiplexed (WDM) transmitters.A 9 µm oxide aperture diameter VCSEL has a threshold current of 1.2 mA and a maximum output power of 1.6 mW at ~845 nm. The performance is currently limited by the too small gain-to-resonance detuning and the high thermal impedance.
|
|
| 7. |
- Haglund, Emanuel, 1988, et al.
(författare)
-
Silicon-integrated short-wavelength hybrid-cavity VCSEL
- 2015
-
Ingår i: Optics Express. - 1094-4087 .- 1094-4087. ; 23:26, s. 33634-33640
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate a short-wavelength hybrid-cavity vertical-cavity surface-emitting laser (VCSEL) heterogeneously integrated on silicon. A GaAs-based “half-VCSEL” has been attached to a dielectric distributed Bragg reflector (DBR) on a silicon wafer using ultra-thin divinylsiloxane-bis-benzocyclobutene (DVS-BCB) adhesive bonding, thereby creating a cavity with the standing-wave optical field extending over the silicon- and GaAs-based parts of the cavity. A 9 µm oxide aperture diameter VCSEL with a threshold current of 1.2 mA produces 1.6 mW optical output power at 6.0 mA bias current with a wavelength of ~845 nm.
|
|
