| 1. |
|
|
| 2. |
- Almemark, Mats, et al.
(författare)
-
Aktiva badhus
- 2015
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- Projektet syftar till att ta fram ett underlag som kan ligga till grund för de val man gör som anläggningsägare då en simhall med all kringutrustning skall utformas och byggas, i syfte att såväl byggnation som drift av badhusen ska genomföras på ett så miljö- och hälsomässigt samt ekonomiskt hållbart sätt som möjligt. De aspekter som behandlas är energianvändning, vattenrening, ventilation och innemiljö, driftsoptimering genom simulering av driften med en simuleringsmodell som har tagits fram inom ramen för projektet samt städmetoder. Den övervägande delen av befintliga badhus är utrustade med reningsanläggningar bestående av sandfilter med flockningssteg. I stort sett alla badhus använder klor för att desinficera badvattnet. I och med att problemen med bildning av desinfektionsbiprodukter uppmärksammats i en allt större utsträckning på senare tid så har kompletterande reningssteg tillförts. Membranfiltrering för rening av badvatten har länge varit en allt för energikrävande teknik och därför inte setts som ett gångbart alternativ till sandfilter. Det finns dock en potential för att använda membranteknik i större utsträckning framöver då tekniken utvecklats och idag inte är lika energikrävande som förr. Rent teoretiskt så är energibehovet för membranfiltrering i samma storleksordning som för sandfilter. De badhus som studerats i detta projekt har använt klor för att desinficera bassängvattnet. Inom ramen för projektet har energianvändningen i tre badhus kartlagts, och förslag till energieffektiviseringsåtgärder har tagits fram. Resultatet visar att det är möjligt effektivisera energianvändningen i badhus med i storleksordningen 70 procent jämfört med dagens nivåer, vilket avsevärt förbättrar såväl miljöprestanda som den ekonomiska bärkraften för anläggningarna.
|
|
| 3. |
|
|
| 4. |
- Bergseth, Ellen, 1979-, et al.
(författare)
-
Effects of thrust washer bearing surface characteristics on planetary gear train wear
- 2019
-
Ingår i: Wear. - : Elsevier. - 0043-1648 .- 1873-2577. ; 432-433
-
Tidskriftsartikel (refereegranskat)abstract
- Thrust washers in spur planetary gears are placed between the planet wheel and planet carrier and act as spacers and wear pads. Metal to metal sliding contact between the planet wheel – washer – carrier causes frictional power losses that, combined with starved lubrication, may cause high contact temperatures and thermo-mechanical effects that potentially trigger thermo-elastic instabilities and excessive local wear. The planetary gear system would benefit from a low-friction interface between the washer and the planet wheel. Five washers with different surface treatments were tested in a full-scale gear rig. These tests were also replicated as closely as possible in a pin-on-disc tribometer. The following types of finishing material treatments were studied: a chemical nickel coating plus polymer on a nitro-carburised surface, a combination of nitro-carburization and solid lubricant layers, electroless deposited chemical nickel coating plus polymer, nitro-carburizing, and manganese phosphating. The frictional results indicate that tribometer tests can be used to compare and classify new washer materials. Lab scale tests show that a new experimental self-lubricating tribomaterial that was applied with laser cladding has a promising potential to increase planetary gear train robustness and service life, especially if the surface is fine grinded.
|
|
| 5. |
- Eriksson, Jenny, 1975-, et al.
(författare)
-
New ways of collecting individual travel information : Evaluation of data collection and recruitment methods
- 2018
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- The overall purpose of the project is to conduct a demonstration study that shows how two data collection methods that have been developed to collect travel survey data perform in the field, and how they perform compared with traditional TS (i.e., postal questionnaires and/or telephone interviews). The project is also intended to provide a better understanding of the ways in which different recruitment methods of respondents can be used so that future TS can be more cost effective.The two collection methods tested consist of a mobile app and an online questionnaire with a map to assist the respondents to identify travel destinations. Three recruitment methods were used, i.e., recruitment via random sampling, a web panel, and crowdsourcing. The portion of the random sample that received an online questionnaire was divided into two groups. Half the group was given no incentive, while the other half received a gift card worth SEK 100 after answering the questioner. Those who were recruited via a web panel and were to use the mobile app were rewarded in the form of a gift card worth SEK 100 if, at minimum, they made corrections to trips made on one day registered in the mobile app. A nonresponse analysis was performed of the random sample for both the online questionnaire and the mobile app. Cost estimates for each collection method and recruitment method were also performed, as were uncertainty estimates.Overall, the study shows that the mobile app registered significantly more trips per respondent than did the online questionnaire, while the distances travelled were comparable. There are several possible interpretations of this. One is that people who responded to the online questionnaire either forget about and/or combined short trips (particularly trips made for the purposes of leisure or shopping, and using the travel modes walking and car). One presumable explanation for this is that it is easier to confirm/correct the trips that the mobile app suggests than it is to recall and enter all trips in an online questionnaire. Another possible interpretation is that people responding to different data collection methods have different travel patterns. Yet another explanation is connected to technique issues regarding the different data collection methods.
|
|
| 6. |
- Eriksson, Jenny, 1975-, et al.
(författare)
-
Nya sätt att samla in individuell resvaneinformation : Utvärdering av insamlings- och rekryteringsmetoder
- 2018
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- Inom samverkansprogrammet Nästa generations resor och transporter, som Trafikanalys är huvudansvarig för, har man identifierat ett behov av att finna och utveckla nya lösningar för resvaneundersökningar (RVU:er). Bakgrunden till detta är bland annat sjunkande svarsfrekvenser med dagens metoder, vilket skulle kunna ge problem med representativiteten. Det anses som mycket angeläget att utveckla nya metoder för datainsamling för framtidens RVU:er, både på kort och lång sikt.Det övergripande syftet med projektet är att göra en demonstrationsstudie som visar hur två datainsamlingsmetoder som har utvecklats för att samla in resevaneundersökningsdata presterar i fält, samt hur de presterar jämfört med ”traditionell” RVU (postal enkät och/eller telefonintervjuer). Projektet syftar också till att få bättre förståelse för hur olika rekryteringsmetoder kan användas för att framtida RVU:er ska kunna bli mer kostnadseffektiva. De två insamlingsmetoder som testats är webbenkät med karta och mobilapp. Tre rekryteringsmetoder har använts och dessa är rekrytering via slumpmässigt urval, webbpanel och crowdsourcing.
|
|
| 7. |
- Gedefaw, Desta Antenehe, 1971, et al.
(författare)
-
Induced photodegradation of quinoxaline based copolymers for photovoltaic applications
- 2016
-
Ingår i: Solar Energy Materials and Solar Cells. - : Elsevier BV. - 0927-0248. ; 144, s. 150-158
-
Tidskriftsartikel (refereegranskat)abstract
- We report here the synthesis and characterization of a series of p-type copolymers, which combine a fluorinated quinoxaline (FQ) acceptor unit either with a differently substituted benzodithiophene (BDT) or an unsubstituted thieno[3,2-b]thiophene (TT). The effect of the structural modifications on the photochemical stability of the resulting films is investigated and then correlated with the photovoltaic performance and lifetime measurements of corresponding photovolatic devices. To this end, we firstly studied the intrinsic stability of each polymer film by monitoring the UV-vis absorption decay, under simulated sunlight, as a function of ageing time. Bulk heterojunction solar cells, based on these polymers as donor materials, were fabricated and tested. Beside the initial values, we monitored the photovoltaic performance during prolonged light soaking in order to evaluate and compare the photostability of more complex systems such as working solar cells.
|
|
| 8. |
- Gedefaw, Desta Antenehe, 1971, et al.
(författare)
-
Synthesis and characterization of benzodithiophene and benzotriazole-based polymers for photovoltaic applications
- 2016
-
Ingår i: Beilstein Journal of Organic Chemistry. - : Beilstein Institut. - 1860-5397. ; 12, s. 1629-1637
-
Tidskriftsartikel (refereegranskat)abstract
- Two high bandgap benzodithiophene-benzotriazole-based polymers were synthesized via palladium-catalysed Stille coupling reaction. In order to compare the effect of the side chains on the opto-electronic and photovoltaic properties of the resulting polymers, the benzodithiophene monomers were substituted with either octylthienyl (PTzBDT-1) or dihexylthienyl (PTzBDT-2) as side groups, while the benzotriazole unit was maintained unaltered. The optical characterization, both in solution and thin-film, indicated that PTzBDT-1 has a red-shifted optical absorption compared to PTzBDT-2, likely due to a more planar conformation of the polymer backbone promoted by the lower content of alkyl side chains. The different aggregation in the solid state also affects the energetic properties of the polymers, resulting in a lower highest occupied molecular orbital (HOMO) for PTzBDT-1 with respect to PTzBDT-2. However, an unexpected behaviour is observed when the two polymers are used as a donor material, in combination with PC61BM as acceptor, in bulk heterojunction solar cells. Even though PTzBDT-1 showed favourable optical and electrochemical properties, the devices based on this polymer present a power conversion efficiency of 3.3%, considerably lower than the efficiency of 4.7% obtained for the analogous solar cells based on PTzBDT-2. The lower performance is presumably attributed to the limited solubility of the PTzBDT-1 in organic solvents resulting in enhanced aggregation and poor intermixing with the acceptor material in the active layer.
|
|
| 9. |
- George, Zandra, 1985, et al.
(författare)
-
Improved performance and life time of inverted organic photovoltaics by using polymer interfacial materials
- 2015
-
Ingår i: Solar Energy Materials and Solar Cells. - : Elsevier BV. - 0927-0248. ; 133, s. 99-104
-
Tidskriftsartikel (refereegranskat)abstract
- A previously published fluorene based interlayer polymer is here compared to three similar polymers where the fluorene monomer has been exchanged with monomers that have been reported to have a higher photo-chemical stability. The polymer interlayers have been studied in terms of their influence on device performance and stability on inverted devices with an active layer of P3HT:PC61BM. By acting as a hole-blocking layer the polymers are able to increase the efficiency of the devices with similar to 50% compared to devices with an ITO cathode. In addition, the polymers also improve the photo-stability of the devices, mainly as an effect of a reduced decrease in open-circuit voltage and fill factor. This indicates that solution processable polymer interlayers could be a way towards both higher efficiency and improved stability of inverted organic solar cells.
|
|
| 10. |
- Grigonyte, Gintare, et al.
(författare)
-
Swedification patterns of Latin and Greek affixes in clinical text
- 2016
-
Ingår i: Nordic Journal of Linguistics. - 0332-5865 .- 1502-4717. ; 39:1, s. 5-37
-
Tidskriftsartikel (refereegranskat)abstract
- Swedish medical language is rich with Latin and Greek terminology which has undergone a Swedification since the 1980s. However, many original expressions are still used by clinical professionals. The goal of this study is to obtain precise quantitative measures of how the foreign terminology is manifested in Swedish clinical text. To this end, we explore the use of Latin and Greek affixes in Swedish medical texts in three genres: clinical text, scientific medical text and online medical information for laypersons. More specifically, we use frequency lists derived from tokenised Swedish medical corpora in the three domains, and extract word pairs belonging to types that display both the original and Swedified spellings. We describe six distinct patterns explaining the variation in the usage of Latin and Greek affixes in clinical text. The results show that to a large extent affixes in clinical text are Swedified and that prefixes are used more conservatively than suffixes.
|
|
| 11. |
- Hedström, Svante, et al.
(författare)
-
Temperature-Dependent Optical Properties of Flexible Donor - Acceptor Polymers
- 2015
-
Ingår i: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 119:12, s. 6453-6463
-
Tidskriftsartikel (refereegranskat)abstract
- Optical properties of five donor acceptor polymers of interest for light-harvesting in organic photovoltaic devices have been studied experimentally and computationally. Experimentally recorded absorption spectra in solution of the five polymers are shown to be significantly temperature-dependent. The polymers were subjected to a first-principles computational treatment using density functional theory optimizations and excitation calculations. For two of the polymers, APFO-3 and PTI-1, a methodology that accounts for a thermally induced distribution of conformations based on Boltzmann statistics is applied to produce size- and temperature-converged optical results. This provides a deeper understanding of the temperature dependence of optical properties and improves the computational predictions of absorption wavelength and intensity at experimentally accessible temperatures, as compared to results from traditional quantum chemical calculations based on optimized polymers. Together, the combined experimental and computational temperature studies elucidate and quantify the significant influence of structural flexibility on the optical absorption properties of typical donor acceptor polymers.
|
|
| 12. |
- Henriksson, Fredrik, 1988-
(författare)
-
Introducing New Materials in the Automotive Industry : Managing the Complexity of Introducing New Materials in Existing Production Systems
- 2017
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Passenger vehicles are central to Western society, and contribute to a significant part of our greenhouse gas emissions. In order to reduce emissions, the automotive industry as a whole is working to reduce mass in passenger vehicles in order to reduce energy consumption. One way to reduce mass is to introduce lightweight materials in the body of the vehicle. This research aims to explore the relationship between product and production system when introducing new materials.Besides a theoretical review and an industry-centered technological mapping, four case studies have been conducted during the course of this licentiate thesis. Two case studies were conducted with engineering design students working as development teams, one case study with the author as the developer and finally one case study in an industrial environment at a product owning company with in-house production. The goal of the case studies has been to increase the collective knowledge of how product development decisions affect production development decisions, and vice versa, when developing passenger vehicles in new materials.In the following analysis of case study outcomes, a number of factors important for introducing new materials are discussed. The relationship between product and production is investigated, both in terms of how the production system affects the product and how the product affects the production system. The outcome from this analysis is a mapping of important factors for automotive industry companies to understand and identify when looking at introducing new materials in existing production systems. Finally, a suggestion for future research efforts is presented.
|
|
| 13. |
- Henriksson, Fredrik, 1988-, et al.
(författare)
-
Production system and material efficiency challenges for large scale introduction of complex materials
- 2017
-
Ingår i: <em>Advanced Materials Proceedings</em>. - Linköping : VBRI Press. - 2002-441X .- 2002-4428. ; , s. 492-499
-
Konferensbidrag (refereegranskat)abstract
- This paper links production system research to advanced material research for the vehicle industry. Facilitated by need for reduction of fuel use, the automotive industry is pushing a radical change from using steel structures to new mixed materials structures. In production systems optimised for steel, the changes will affect productivity and material efficiency. Four industrial case studies focusing on production economy and productivity give implications of production technology demands on the material selection regarding new joining techniques and additive or forming methods which has to be investigated when considering new materials. Material efficiency analysis shows that minimising spill in production operations and regulatory demand of recycling need to be considered in material development, which implies both design for disassembly, advanced separation processes and use of recycled raw materials. To be successful in new material introduction, new information flows and knowledge sharing moving from operations and manufacturing development to materials development and design are needed. The material developers could use axiomatic design strategies to structure the production system demands on the materials. State of the art lightweight producers in vehicle and automotive industry are likely early adopters to advanced lightweight structures with need of information flows between material development and operations.
|
|
| 14. |
- Henriksson, Maria P.
(författare)
-
Human Rationality : Observing or Inferring Reality
- 2015
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- This thesis investigates the boundary of human rationality and how psychological processes interact with underlying regularities in the environment and affect beliefs and achievement. Two common modes in everyday experiential learning, supervised and unsupervised learning were hypothesized to tap different ecological and epistemological approaches to human adaptation; the Brunswikian and the Gibsonian approach. In addition, they were expected to be differentially effective for achievement depending on underlying regularities in the task environment. The first approach assumes that people use top-down processes and learn from hypothesis testing and external feedback, while the latter assumes that people are receptive to environmental stimuli and learn from bottom-up processes, without mediating inferences and support from external feedback, only exploratory observations and actions.Study I investigates selective supervised learning and showed that biased beliefs arise when people store inferences about category members when information is partially absent. This constructivist coding of pseudo-exemplars in memory yields a conservative bias in the relative frequency of targeted category members when the information is constrained by the decision maker’s own selective sampling behavior, suggesting that niche picking and risk aversion contribute to conservatism or inertia in human belief systems. However, a liberal bias in the relative frequency of targeted category members is more likely when information is constrained by the external environment. This result suggests that highly exaggerated beliefs and risky behaviors may be more likely in environments where information is systematically manipulated, for example when positive examples are highlighted to convey a favorable image while negative examples are systematically withheld from the public eye.Study II provides support that the learning modes engage different processes. Supervised learning is more accurate in less complex linear task environments, while unsupervised learning is more accurate in complex nonlinear task environments. Study III provides further support for abstraction based on hypothesis testing in supervised learning, and abstraction based on receptive bottom-up processes in unsupervised learning that aimed to form ideal prototypes as highly valid reference points stored in memory. The studies support previous proposals that integrating the Brunswikian and the Gibsonian approach can broaden the scope of psychological research and scientific inquiry.
|
|
| 15. |
- Lindqvist, C Mårten, et al.
(författare)
-
The Mutational Landscape in Pediatric Acute Lymphoblastic Leukemia Deciphered by Whole Genome Sequencing
- 2015
-
Ingår i: Human Mutation. - : Hindawi Limited. - 1059-7794 .- 1098-1004. ; 36:1, s. 118-128
-
Tidskriftsartikel (refereegranskat)abstract
- Genomic characterization of pediatric acute lymphoblastic leukemia (ALL) has identified distinct patterns of genes and pathways altered in patients with well-defined genetic aberrations. To extend the spectrum of known somatic variants in ALL, we performed whole genome and transcriptome sequencing of three B-cell precursor patients, of which one carried the t(12;21)ETV6-RUNX1 translocation and two lacked a known primary genetic aberration, and one T-ALL patient. We found that each patient had a unique genome, with a combination of well-known and previously undetected genomic aberrations. By targeted sequencing in 168 patients, we identified KMT2D and KIF1B as novel putative driver genes. We also identified a putative regulatory non-coding variant that coincided with overexpression of the growth factor MDK. Our results contribute to an increased understanding of the biological mechanisms that lead to ALL and suggest that regulatory variants may be more important for cancer development than recognized to date. The heterogeneity of the genetic aberrations in ALL renders whole genome sequencing particularly well suited for analysis of somatic variants in both research and diagnostic applications.
|
|
