1. |
- Phenrat, Tanapon, et al.
(författare)
-
Empirical correlations to estimate agglomerate size and deposition during injection of a polyelectrolyte-modified Fe0 nanoparticle at high particle concentration in saturated sand
- 2010
-
Ingår i: Journal of Contaminant Hydrology. - : Elsevier BV. - 0169-7722 .- 1873-6009. ; 118:3-4, s. 152-164
-
Tidskriftsartikel (refereegranskat)abstract
- Controlled emplacement of polyelectrolyte-modified nanoscale zerovalent iron (NZVI) particles at high particle concentration (1-10 g/L) is needed for effective in situ subsurface remediation using NZVI. Deep bed filtration theory cannot be used to estimate the transport and deposition of concentrated polyelectrolyte-modified NZVI dispersions (> 0.03 g/L) because particles agglomerate during transport which violates a fundamental assumption of the theory. Here we develop two empirical correlations for estimating the deposition and transport of concentrated polyelectrolyte-modified NZVI dispersions in saturated porous media when NZVI agglomeration in porous media is assumed to reach steady state quickly. The first correlation determines the apparent stable agglomerate size formed during NZVI transport in porous media for a fixed hydrogeochemical condition. The second correlation estimates the attachment efficiency (sticking coefficient) of the stable agglomerates. Both correlations are described using dimensionless numbers derived from parameters affecting deposition and agglomeration in porous media. The exponents for the dimensionless numbers are determined from statistical analysis of breakthrough data for polyelectrolyte-modified NZVI dispersions collected in laboratory scale column experiments for a range of ionic strength (1, 10, and 50 mM Na + and 0.25, 1, and 1.25 mM Ca2+), approach velocity (0.8 to 55 × 10-4 m/s), average collector sizes (d50 = 99 μm, 300 μm, and 880 μm), and polyelectrolyte surface modifier properties. Attachment efficiency depended on approach velocity and was inversely related to collector size, which is contrary to that predicted from classic filtration models. High ionic strength, the presence of divalent cations, lower extended adsorbed polyelectrolyte layer thickness, decreased approach velocity, and a larger collector size promoted NZVI agglomeration and deposition and thus limited its mobility in porous media. These effects are captured quantitatively in the two correlations developed. The application and limitations of using the correlations for preliminary design of in situ NZVI emplacement strategies is discussed.
|
|
2. |
- Trevisan, Luca, et al.
(författare)
-
Investigation of mechanisms of supercritical CO2 trapping in deep saline reservoirs using surrogate fluids at ambient laboratory conditions
- 2014
-
Ingår i: International Journal of Greenhouse Gas Control. - : Elsevier BV. - 1750-5836 .- 1878-0148. ; 29, s. 35-49
-
Tidskriftsartikel (refereegranskat)abstract
- Geological storage of carbon dioxide relies on the effectiveness of immobilizing CO2 in the pore space of deep geological formations through a number of trapping mechanisms that include capillary, dissolution, and mineral trapping. Improved fundamental understanding of these processes is expected to contribute toward better conceptual models, improved numerical models, more accurate assessment of storage capacities, and optimized placement strategies. However, studying these processes at a fundamental level is not feasible in field settings because fully characterizing the geologic variability at all relevant scales and making observations on the spatial and temporal distribution of the migration and trapping of supercritical CO2 (scCO(2)) is not practical. The specific goal of this study is to develop and implement an experimental method in intermediate scale test tanks under ambient laboratory conditions to make observations and generate data to improve the understanding of capillary trapping affected by fluid and formation properties. Since it is challenging to visualize multiphase flow processes occurring at high pressure conditions at the meter scale, a testing method was developed based on the use of surrogate test fluids to replace the scCO(2) and formation saline water. To set a foundation for extrapolating experimental results to the field, we chose a set of dimensionless groups that define the relative contributions of buoyancy, viscous, and capillary forces to the displacement behavior of immiscible fluids. The experiments were designed with the goal of understanding and accurately quantifying the immobilization of the scCO(2) analog in a homogeneous formation confined by a slightly dipping structural barrier. A set of three displacement experiments through unconsolidated sands with variable permeability was conducted in a quasi-two-dimensional flow cell to gain insight into the influence of buoyancy forces on the propagation of the displacing phase. This work takes advantage of laboratory experiments at the intermediate scale to investigate gravitational and hysteresis effects on entrapment of scCO(2) currents in brine-saturated reservoirs. Understanding these phenomena at a fundamental level represents a critical step to improve injection strategies and to enhance capillary trapping mechanisms.
|
|