| 1. |
- Ahsan, Amimul, et al.
(author)
-
Modeling of a new triangular shape solar distillation system integrated with solar PV panel and DC water heater
- 2023
-
In: Case Studies in Thermal Engineering. - : Elsevier. - 2214-157X. ; 44
-
Journal article (peer-reviewed)abstract
- A new triangular shape solar distillation system is fabricated using locally available materials by integrating with solar PV panel connected to DC water heater. It is designed for the first time to distill saline water or seawater using solar heat energy directly (to heat sample water) and indirectly (through water heater to heat sample water). The trough is made of Plexiglass and painted in black color which is placed inside the triangular frame made of UPVC pipe. The performance of the still is experimented in field. The diurnal variations of solar heat energy, distillate output, various temperatures and relative humidity are observed. A few linear proportional relationships are obtained between the sunlight heat energy and the productivity, between the ambient temperature and the productivity, and between the productivity and water-cover temperature difference. The production rate of the still is higher than the conventional one. An improved simulation model is proposed to estimate the productivity of the still as some previous simulation models cannot estimate the productivity of the solar still precisely. A few new factors are incorporated in the new model as these factors affect the distillate output of the solar still.
|
|
| 2. |
- Ahsan, Amimul, et al.
(author)
-
Modeling the impacts of best management practices (BMPs) on pollution reduction in the Yarra River catchment, Australia
- 2023
-
In: Applied water science. - : Springer. - 2190-5487 .- 2190-5495. ; 13
-
Journal article (peer-reviewed)abstract
- Pollution of a watershed by different land uses and agricultural practices is becoming a major challenging factor that results in deterioration of water quality affecting human health and ecosystems. Sustainable use of available water resources warrants reduction of Non-Point Source (NPS) pollutants from receiving water bodies through best management practices (BMPs). A hydrologic model such as the Soil and Water Assessment Tool (SWAT) can be used for analyzing the impacts of various BMPs and implementing of different management plans for water quality improvement, which will help decision makers to determine the best combination of BMPs to maximize benefits. The objective of this study is to assess the potential reductions of sediments and nutrient loads by utilizing different BMPs on the Yarra River watershed using the SWAT model. The watershed is subdivided into 51 sub-watersheds where seven different BMPs were implemented. A SWAT model was developed and calibrated against a baseline period of 1998–2008. For calibration and validation of the model simulations for both the monthly and annual nutrients and sediments were assessed by using the Nash–Sutcliffe efficiency (NSE) statistical index. The values of the NSE were found more than 0.50 which indicates satisfactory model predictions. By utilizing different BMPs, the highest pollution reduction with minimal costs can be done by 32% targeted mixed-crop area. Furthermore, the combined effect of five BMPs imparts most sediments and nutrient reductions in the watershed. Overall, the selection of a BMP or combinations of BMPs should be set based on the goals set in a BMP application project.
|
|
| 3. |
- Kaur, Parminder, et al.
(author)
-
Photoelectrocatalytic treatment of municipal wastewater with emerging concern pollutants using modified multi-layer catalytic anode
- 2023
-
In: Chemosphere. - : Elsevier Ltd. - 0045-6535 .- 1879-1298. ; 339
-
Journal article (peer-reviewed)abstract
- Municipal wastewater contains emergent chemical and biological pollutants that are resistant to conventional wastewater treatments. Therefore, the focus of the current study was to address the challenge of removing emergent chemical and biological pollutants present in municipal wastewater. To achieve this, a photo electro-catalytic (PEC) treatment approach was employed, focusing on the removal of both micro and biological pollutants that are of emergent concern, as well as the reduction of Chemical Oxidation Demand (COD) and Total Organic Carbon (TOC). The treatment involved the use of a modified multi-layer catalytic anode photo-electroactive anode as an effective anode for PEC treatment of municipal wastewater. In the continuous mode of operation, %COD removal was optimized for the treatment of municipal wastewater under Ultra-Violet C (UVc), 280 nm, and Visible (Vis) radiation, 400 nm. Therefore, a comparative study was performed to investigate the effect of Vis radiation on %COD removal, micropollutants removal, and disinfection of municipal wastewater. Micropollutants present in municipal wastewater were effectively oxidized/degraded with the highest reduction rate between 100% and 80% under the influence of UVc and Vis radiation respectively by the PEC treatment process. Disinfection of various microorganisms present in the wastewater with the effect of UVc and Vis assisted PEC treatment was also monitored. Overall, 75–80% of the disinfection of municipal wastewater was contributed by the modified multi-layer catalytic anode. The UVc in the PEC system, contributes approximately 20–25% to the overall disinfection of municipal wastewater.
|
|
