| 1. |
- Jacobsson, Jesper, 1984-, et al.
(author)
-
An open-access database and analysis tool for perovskite solar cells based on the FAIR data principles
- 2022
-
In: Nature Energy. - : Springer Nature. - 2058-7546. ; 7:1, s. 107-115
-
Journal article (peer-reviewed)abstract
- Large datasets are now ubiquitous as technology enables higher-throughput experiments, but rarely can a research field truly benefit from the research data generated due to inconsistent formatting, undocumented storage or improper dissemination. Here we extract all the meaningful device data from peer-reviewed papers on metal-halide perovskite solar cells published so far and make them available in a database. We collect data from over 42,400 photovoltaic devices with up to 100 parameters per device. We then develop open-source and accessible procedures to analyse the data, providing examples of insights that can be gleaned from the analysis of a large dataset. The database, graphics and analysis tools are made available to the community and will continue to evolve as an open-source initiative. This approach of extensively capturing the progress of an entire field, including sorting, interactive exploration and graphical representation of the data, will be applicable to many fields in materials science, engineering and biosciences.
|
|
| 2. |
- Almora, Osbel, et al.
(author)
-
Device Performance of Emerging Photovoltaic Materials (Version 1)
- 2020
-
In: Advanced Energy Materials. - : Wiley. - 1614-6832 .- 1614-6840. ; 11:11
-
Journal article (peer-reviewed)abstract
- Emerging photovoltaics (PVs) focus on a variety of applications complementing large scale electricity generation. Organic, dye-sensitized, and some perovskite solar cells are considered in building integration, greenhouses, wearable, and indoor applications, thereby motivating research on flexible, transparent, semitransparent, and multi-junction PVs. Nevertheless, it can be very time consuming to find or develop an up-to-date overview of the state-of-the-art performance for these systems and applications. Two important resources for recording research cells efficiencies are the National Renewable Energy Laboratory chart and the efficiency tables compiled biannually by Martin Green and colleagues. Both publications provide an effective coverage over the established technologies, bridging research and industry. An alternative approach is proposed here summarizing the best reports in the diverse research subjects for emerging PVs. Best performance parameters are provided as a function of the photovoltaic bandgap energy for each technology and application, and are put into perspective using, e.g., the Shockley–Queisser limit. In all cases, the reported data correspond to published and/or properly described certified results, with enough details provided for prospective data reproduction. Additionally, the stability test energy yield is included as an analysis parameter among state-of-the-art emerging PVs.
|
|
| 3. |
- Hultqvist, Adam, et al.
(author)
-
SnOx Atomic Layer Deposition on Bare Perovskite-An Investigation of Initial Growth Dynamics, Interface Chemistry, and Solar Cell Performance
- 2021
-
In: ACS Applied Energy Materials. - : American Chemical Society (ACS). - 2574-0962. ; 4:1, s. 510-522
-
Journal article (peer-reviewed)abstract
- High-end organic-inorganic lead halide perovskite semitransparent p-i-n solar cells for tandem applications use a phenyl-C-61-butyric acid methyl ester (PCBM)/atomic layer deposition (ALD)-SnOx electron transport layer stack. Omitting the PCBM would be preferred for manufacturing, but has in previous studies on (FA,MA)Pb(Br,I)(3) and (Cs,FA)Pb(Br,I)(3) and in this study on Cs(0)(.0)(5)FA(0.79)MA(0.16)PbBr(0.51)I(2.49) (perovskite) led to poor solar cell performance because of a bias-dependent light-generated current. A direct ALD-SnOx exposure was therefore suggested to form a nonideal perovskite/SnOx interface that acts as a transport barrier for the light-generated current. To further investigate the interface formation during the initial ALD SnOx growth on the perovskite, the mass dynamics of monitor crystals coated by partial p-i-n solar cell stacks were recorded in situ prior to and during the ALD using a quartz crystal microbalance. Two major finds were made. A mass loss was observed prior to ALD for growth temperatures above 60 degrees C, suggesting the decomposition of the perovskite. In addition, a mostly irreversible mass gain was observed during the first exposure to the Sn precursor tetrakis(dimethylamino)tin(IV) that is independent of growth temperature and that disrupts the mass gain of the following 20-50 ALD cycles. The chemical environments of the buried interface were analyzed by soft and hard X-ray photoelectron spectroscopy for a sample with 50 ALD cycles of SnOx on the perovskite. Although measurements on the perovskite bulk below and the SnOx film above did not show chemical changes, additional chemical states for Pb, Br, and N as well as a decrease in the amount of I were observed in the interfacial region. From the analysis, these states and not the heating of the perovskite were concluded to be the cause of the barrier. This strongly suggests that the detrimental effects can be avoided by controlling the interfacial design.
|
|
| 4. |
- Jacobsson, T. Jesper, 1984-, et al.
(author)
-
2-Terminal CIGS-perovskite tandem cells : A layer by layer exploration
- 2020
-
In: Solar Energy. - : Elsevier BV. - 0038-092X .- 1471-1257. ; 207, s. 270-288
-
Journal article (peer-reviewed)abstract
- This paper focuses on the development of 2-terminal CIGS-perovskite tandem solar cells by exploring a range of stack sequences and synthetic procedures for depositing the associated layers. In the end, we converged at a stack sequence composed of SLG/Mo/CIGS/CdS/i-ZnO/ZnO:Al/NiO/PTAA/Perovskite/LiF/PCBM/SnO2/ITO. With this architecture, we reached performances only about 1% lower than the corresponding 4-terminal tandem cells, thus demonstrating functional interconnects between the two sub-cells while grown monolithically on top of each other. We go through the stack, layer-by-layer, discussing their deposition and the results, from which we can conclude what works, what does not work, and what potentially could work after additional modifications. The challenges for a successful 2-terminal tandem device include: how to deal with, or decrease, the surface roughness of the CIGS-stack, how to obtain uniform coverage of the layers between the CIGS and the perovskite while also obtaining a benign interface chemistry, and how to tune the band gaps of both the CIGS and the perovskite to obtain good optical matching. The investigation was based on CIGS with a power conversion efficiency around 14%, and perovskites with an efficiency around 12%, resulting in 2-terminal tandem cells with efficiencies of 15–16%. The results indicate that by using higher performing CIGS and perovskite sub-cells, it should be possible to manufacture highly efficient 2-terminal CIGS-perovskite tandem devices by using the protocols, principles, and procedures developed and discussed in this paper.
|
|
| 5. |
- Saliba, Michael, et al.
(author)
-
A systematic discrepancy between the short circuit current and the integrated quantum efficiency in perovskite solar cells
- 2023
-
In: Nature Communications. - 2041-1723. ; 14:1
-
Journal article (peer-reviewed)abstract
- Halide perovskites solar cells are now approaching commercialisation. In this transition from academic research towards industrialisation, standardized testing protocols and reliable dissemination of performance metrics are crucial. In this study, we analyze data from over 16,000 publications in the Perovskite Database to investigate the assumed equality between the integrated external quantum efficiency and the short circuit current from JV measurements. We find a systematic discrepancy with the JV-values being on average 4% larger. This discrepancy persists across time, perovskite composition, and device architecture, indicating the need to explore new perovskite physics and update reporting protocols and assumptions in the field.
|
|
| 6. |
- Svanström, Sebastian, et al.
(author)
-
Direct Measurements of Interfacial Photovoltage and Band Alignment in Perovskite Solar Cells Using Hard X-ray Photoelectron Spectroscopy
- 2023
-
In: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 15:9, s. 12485-12494
-
Journal article (peer-reviewed)abstract
- A heterojunction is the key junction for charge extraction in many thin film solar cell technologies. However, the structure and band alignment of the heterojunction in the operating device are often difficult to predict from calculations and, due to the complexity and narrow thickness of the interface, are difficult to measure directly. In this study, we demonstrate a technique for direct measurement of the band alignment and interfacial electric field variations of a fully functional lead halide perovskite solar cell structure under operating conditions using hard X-ray photoelectron spectroscopy (HAXPES). We describe the design considerations required in both the solar cell devices and the measurement setup and show results for the perovskite, hole transport, and gold layers at the back contact of the solar cell. For the investigated design, the HAXPES measurements suggest that 70% of the photovoltage was generated at this back contact, distributed rather equally between the hole transport material/gold interface and the perovskite/hole transport material interface. In addition, we were also able to reconstruct the band alignment at the back contact at equilibrium in the dark and at open circuit under illumination.
|
|
| 7. |
- Svanström, Sebastian, et al.
(author)
-
The Complex Degradation Mechanism of Copper Electrodes on Lead Halide Perovskites
- 2022
-
In: ACS Materials Science Au. - : American Chemical Society (ACS). - 2694-2461. ; 2:3, s. 301-312
-
Journal article (peer-reviewed)abstract
- Lead halide perovskitesolar cells have reached power conversionefficiencies during the past few years that rival those of crystallinesilicon solar cells, and there is a concentrated effort to commercializethem. The use of gold electrodes, the current standard, is prohibitivelycostly for commercial application. Copper is a promising low-costelectrode material that has shown good stability in perovskite solarcells with selective contacts. Furthermore, it has the potential tobe self-passivating through the formation of CuI, a copper salt whichis also used as a hole selective material. Based on these opportunities,we investigated the interface reactions between lead halide perovskitesand copper in this work. Specifically, copper was deposited on theperovskite surface, and the reactions were followed in detail usingsynchrotron-based and in-house photoelectron spectroscopy. The resultsshow a rich interfacial chemistry with reactions starting upon depositionand, with the exposure to oxygen and moisture, progress over manyweeks, resulting in significant degradation of both the copper andthe perovskite. The degradation results not only in the formationof CuI, as expected, but also in the formation of two previously unreporteddegradation products. The hope is that a deeper understanding of theseprocesses will aid in the design of corrosion-resistant copper-basedelectrodes.
|
|
| 8. |
|
|
