| 1. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 2. |
- Schael, S., et al.
(författare)
-
Electroweak measurements in electron positron collisions at W-boson-pair energies at LEP
- 2013
-
Ingår i: Physics Reports. - : Elsevier BV. - 0370-1573 .- 1873-6270. ; 532:4, s. 119-244
-
Forskningsöversikt (refereegranskat)abstract
- Electroweak measurements performed with data taken at the electron positron collider LEP at CERN from 1995 to 2000 are reported. The combined data set considered in this report corresponds to a total luminosity of about 3 fb(-1) collected by the four LEP experiments ALEPH, DELPHI, 13 and OPAL, at centre-of-mass energies ranging from 130 GeV to 209 GeV. Combining the published results of the four LEP experiments, the measurements include total and differential cross-sections in photon-pair, fermion-pair and four-fermion production, the latter resulting from both double-resonant WW and ZZ production as well as singly resonant production. Total and differential cross-sections are measured precisely, providing a stringent test of the Standard Model at centre-of-mass energies never explored before in electron positron collisions. Final-state interaction effects in four-fermion production, such as those arising from colour reconnection and Bose Einstein correlations between the two W decay systems arising in WW production, are searched for and upper limits on the strength of possible effects are obtained. The data are used to determine fundamental properties of the W boson and the electroweak theory. Among others, the mass and width of the W boson, m(w) and Gamma(w), the branching fraction of W decays to hadrons, B(W -> had), and the trilinear gauge-boson self-couplings g(1)(Z), K-gamma and lambda(gamma), are determined to be: m(w) = 80.376 +/- 0.033 GeV Gamma(w) = 2.195 +/- 0.083 GeV B(W -> had) = 67.41 +/- 0.27% g(1)(Z) = 0.984(-0.020)(+0.018) K-gamma - 0.982 +/- 0.042 lambda(gamma) = 0.022 +/- 0.019. (C) 2013 Elsevier B.V. All rights reserved.
|
|
| 3. |
- Abel, I, et al.
(författare)
-
Overview of the JET results with the ITER-like wall
- 2013
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 53:10, s. 104002-
-
Tidskriftsartikel (refereegranskat)abstract
- Following the completion in May 2011 of the shutdown for the installation of the beryllium wall and the tungsten divertor, the first set of JET campaigns have addressed the investigation of the retention properties and the development of operational scenarios with the new plasma-facing materials. The large reduction in the carbon content (more than a factor ten) led to a much lower Z(eff) (1.2-1.4) during L- and H-mode plasmas, and radiation during the burn-through phase of the plasma initiation with the consequence that breakdown failures are almost absent. Gas balance experiments have shown that the fuel retention rate with the new wall is substantially reduced with respect to the C wall. The re-establishment of the baseline H-mode and hybrid scenarios compatible with the new wall has required an optimization of the control of metallic impurity sources and heat loads. Stable type-I ELMy H-mode regimes with H-98,H-y2 close to 1 and beta(N) similar to 1.6 have been achieved using gas injection. ELM frequency is a key factor for the control of the metallic impurity accumulation. Pedestal temperatures tend to be lower with the new wall, leading to reduced confinement, but nitrogen seeding restores high pedestal temperatures and confinement. Compared with the carbon wall, major disruptions with the new wall show a lower radiated power and a slower current quench. The higher heat loads on Be wall plasma-facing components due to lower radiation made the routine use of massive gas injection for disruption mitigation essential.
|
|
| 4. |
- Crowe, Francesca L., et al.
(författare)
-
Circulating Fatty Acids and Prostate Cancer Risk : Individual Participant Meta-Analysis of Prospective Studies
- 2014
-
Ingår i: Journal of the National Cancer Institute. - : Oxford University Press (OUP). - 0027-8874 .- 1460-2105. ; 106:9, s. dju240-
-
Forskningsöversikt (refereegranskat)abstract
- BackgroundIndividual studies have suggested that some circulating fatty acids are associated with prostate cancer risk, but have not been large enough to provide precise estimates of associations, particularly by stage and grade of disease.MethodsPrincipal investigators of prospective studies on circulating fatty acids and prostate cancer were invited to collaborate. Investigators provided individual participant data on circulating fatty acids (weight percent) and other characteristics of prostate cancer cases and controls. Prostate cancer risk by study-specific fifths of 14 fatty acids was estimated using multivariable-adjusted conditional logistic regression. All statistical tests were two-sided.ResultsFive thousand and ninety-eight case patients and 6649 control patients from seven studies with an average follow-up of 5.1 (SD = 3.3) years were included. Stearic acid (18: 0) was inversely associated with total prostate cancer (odds ratio [OR] Q5 vs Q1 = 0.88, 95% confidence interval [CI] = 0.78 to 1.00, P-trend = .043). Prostate cancer risk was, respectively, 14% and 16% greater in the highest fifth of eicosapentaenoic acid (20:5n-3) (OR = 1.14, 95% CI = 1.01 to 1.29, P-trend = .001) and docosapentaenoic acid (22: 5n-3) (OR = 1.16, 95% CI = 1.02 to 1.33, P-trend = .003), but in each case there was heterogeneity between studies (P = .022 and P < .001, respectively). There was heterogeneity in the association between docosapentaenoic acid and prostate cancer by grade of disease (P = .006); the association was statistically significant for low-grade disease but not high-grade disease. The remaining 11 fatty acids were not statistically associated with total prostate cancer risk.ConclusionThere was no strong evidence that circulating fatty acids are important predictors of prostate cancer risk. It is not clear whether the modest associations of stearic, eicosapentaenoic, and docosapentaenoic acid are causal.
|
|
| 5. |
- Galindo-Moreno, Pablo, et al.
(författare)
-
Clinical and radiographic evaluation of early loaded narrow diameter implants - 1-year follow-up
- 2012
-
Ingår i: Clinical Oral Implants Research. - : John Wiley & Sons. - 0905-7161 .- 1600-0501. ; 23:5, s. 609-616
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: To evaluate the clinical performance of Astra Tech OsseoSpeed™ TX 3.0S implants using one‐stage surgical procedure and early loading in the anterior region. Material and methods: This is a prospective, single arm, multi‐centre study. Patients missing teeth at positions 12, 22 and 32–42 were eligible to enter the study. The implants (OsseoSpeed™ TX 3.0S) used in the study were of 3 mm diameter and of different lengths. One‐stage surgery was performed, and healing abutments were used during the 6–10 weeks healing period. Clinical and radiographic examinations were assessed at implant installation, loading and at the 6‐ and 12‐month follow‐up visits. Results: Ninety‐seven implants were placed in 69 patients at six different study centres in Denmark, Germany, Italy, Spain, Sweden and the United Kingdom. The survival rate was 95.9%. No implants have been lost after loading (100% survival rate after loading). Mean marginal bone loss 1 year after installation was 0.065 mm (SD = 1.018). The frequency of bone loss ≥1 mm was 6.6% and 51.3% of the implants demonstrated no bone loss or even bone gain from the surgical visit to the first year follow‐up visit. Mean probing pocket depth and gingival zenith score were stable from crown placement to the 6‐ and 1‐year follow‐up visits. Conclusion: Treatment with OsseoSpeed™ TX 3.0S implants is a safe and predictable option in the anterior region where physical space is limited. Minimal marginal bone loss was observed during the first year follow‐up.
|
|
| 6. |
- Namavar, Yasmin, et al.
(författare)
-
Clinical, neuroradiological and genetic findings in pontocerebellar hypoplasia.
- 2011
-
Ingår i: Brain : a journal of neurology. - : Oxford University Press (OUP). - 1460-2156. ; 134:Pt 1, s. 143-56
-
Tidskriftsartikel (refereegranskat)abstract
- Pontocerebellar hypoplasia is a group of autosomal recessive neurodegenerative disorders with prenatal onset. The common characteristics are cerebellar hypoplasia with variable atrophy of the cerebellum and the ventral pons. Supratentorial involvement is reflected by variable neocortical atrophy, ventriculomegaly and microcephaly. Mutations in the transfer RNA splicing endonuclease subunit genes (TSEN54, TSEN2, TSEN34) were found to be associated with pontocerebellar hypoplasia types 2 and 4. Mutations in the mitochondrial transfer RNA arginyl synthetase gene (RARS2) were associated with pontocerebellar hypoplasia type 6. We studied a cohort of 169 patients from 141 families for mutations in these genes, of whom 106 patients tested positive for mutations in one of the TSEN genes or the RARS2 gene. In order to delineate the neuroradiological and clinical phenotype of patients with mutations in these genes, we compared this group with 63 patients suspected of pontocerebellar hypoplasia who were negative on mutation analysis. We found a strong correlation (P < 0.0005) between TSEN54 mutations and a dragonfly-like cerebellar pattern on magnetic resonance imaging, in which the cerebellar hemispheres are flat and severely reduced in size and the vermis is relatively spared. Mutations in TSEN54 are clinically associated with dyskinesia and/or dystonia and variable degrees of spasticity, in some cases with pure generalized spasticity. Nonsense or splice site mutations in TSEN54 are associated with a more severe phenotype of more perinatal symptoms, ventilator dependency and early death. In addition, we present ten new mutations in TSEN54, TSEN2 and RARS2. Furthermore, we show that pontocerebellar hypoplasia type 1 together with elevated cerebrospinal fluid lactate may be caused by RARS2 mutations.
|
|
| 7. |
- Robinson, Paul, et al.
(författare)
-
Consensus statement for inert gas washout measurement using multiple and single breath tests.
- 2013
-
Ingår i: The European respiratory journal : official journal of the European Society for Clinical Respiratory Physiology. - : European Respiratory Society (ERS). - 1399-3003. ; 41:3, s. 507-522
-
Tidskriftsartikel (refereegranskat)abstract
- Inert gas washout tests, performed using the single or multiple breath washout technique (SBW and MBW, respectively), were first described over 60 years ago. As measures of ventilation distribution inhomogeneity, they offer complementary information to standard lung function tests such as spirometry as well as improved feasibility across wider age ranges and improved sensitivity in the detection of early lung damage. These benefits have led to a resurgence of interest in these techniques from manufacturers, clinicians and researchers, yet detailed guidelines for washout equipment specifications, test performance and analysis are lacking. This manuscript provides recommendations about these aspects, applicable to both the paediatric and adult testing environment, whilst outlining the important principles that are essential for the reader to understand. These recommendations are evidence-based where possible but in many places represent expert opinion from a working group with a large collective experience in the techniques discussed. Finally, the important issues that remain unanswered are highlighted. By addressing these important issues and directing future research, the hope is to facilitate the incorporation of these promising tests into routine clinical practice.
|
|
| 8. |
- Romanelli, F, et al.
(författare)
-
Overview of the JET results
- 2011
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 51:9
-
Tidskriftsartikel (refereegranskat)abstract
- Since the last IAEA Conference JET has been in operation for one year with a programmatic focus on the qualification of ITER operating scenarios, the consolidation of ITER design choices and preparation for plasma operation with the ITER-like wall presently being installed in JET. Good progress has been achieved, including stationary ELMy H-mode operation at 4.5 MA. The high confinement hybrid scenario has been extended to high triangularity, lower ρ*and to pulse lengths comparable to the resistive time. The steady-state scenario has also been extended to lower ρ*and ν*and optimized to simultaneously achieve, under stationary conditions, ITER-like values of all other relevant normalized parameters. A dedicated helium campaign has allowed key aspects of plasma control and H-mode operation for the ITER non-activated phase to be evaluated. Effective sawtooth control by fast ions has been demonstrated with3He minority ICRH, a scenario with negligible minority current drive. Edge localized mode (ELM) control studies using external n = 1 and n = 2 perturbation fields have found a resonance effect in ELM frequency for specific q95values. Complete ELM suppression has, however, not been observed, even with an edge Chirikov parameter larger than 1. Pellet ELM pacing has been demonstrated and the minimum pellet size needed to trigger an ELM has been estimated. For both natural and mitigated ELMs a broadening of the divertor ELM-wetted area with increasing ELM size has been found. In disruption studies with massive gas injection up to 50% of the thermal energy could be radiated before, and 20% during, the thermal quench. Halo currents could be reduced by 60% and, using argon/deuterium and neon/deuterium gas mixtures, runaway electron generation could be avoided. Most objectives of the ITER-like ICRH antenna have been demonstrated; matching with closely packed straps, ELM resilience, scattering matrix arc detection and operation at high power density (6.2 MW m-2) and antenna strap voltages (42 kV). Coupling measurements are in very good agreement with TOPICA modelling. © 2011 IAEA, Vienna.
|
|
| 9. |
- Stépán, Agnes, 1985, et al.
(författare)
-
Fast and highly efficient acetylation of xylans in ionic liquid systems
- 2013
-
Ingår i: Cellulose. - : Springer Science and Business Media LLC. - 0969-0239 .- 1572-882X. ; 20:6, s. 2813-2824
-
Tidskriftsartikel (refereegranskat)abstract
- In this study high molecular weight pure rye arabinoxylan and spruce arabinoglucuronoxylan were acetylated in ionic liquid (IL) systems. Two different ILs were used in our study. In both IL, using optimized procedures, it was possible to achieve acetylation within 5 min. The first system involved direct dissolution into 1-ethyl-3-methylimidazolium dimethylphosphate ([emim][Me2PO4]), followed by addition of acetyl chloride/pyridine (AcCl/Pyr) and additional chloroform (CHCl3), as co-solvent. The other system involved direct dissolution into the novel protic IL 1,5-diazabicyclo[4.3.0]non-5-enium acetate ([DBNH][OAc]), followed by acetic anhydride/1,5-diazabicyclo[4.3.0]non-5-ene (Ac2O/DBN) and no co-solvent added. The full acetyl substitution of the xylans was confirmed by FT IR and H-1 NMR. The acetylated xylans maintained a high molecular weight, which was confirmed by gel permeation chromatography. The products were soluble in CHCl3 and dimethyl carbonate, which is considered as a 'green' reagent or solvent. This allowed for the casting of the materials into clear transparent films, opening opportunity for further processing and evaluation of these materials.
|
|
