1. |
- Ahmed, Hesham, et al.
(författare)
-
Effect of the Ash from H2‐Rich Carbonaceous Materials on the Physicochemical Properties of Raceway Slag and Coke Reactivity
- 2020
-
Ingår i: Steel Research International. - : John Wiley & Sons. - 1611-3683 .- 1869-344X. ; 91:11
-
Tidskriftsartikel (refereegranskat)abstract
- The iron and steel industry is one of the most important sectors worldwide, and it has a great impact on the global economy; however, this sector is still highly dependent on fossil carbon. To decrease this dependency, approaches to partially replace the injected pulverized coal with secondary, highly reactive, renewable (biomass) and H2‐rich materials have been studied. The injection of such materials is expected to significantly decrease the emitted CO2 from blast furnaces. However, due to the different ash composition of these alternative materials (especially alkali and alkaline earth metals) compared to that of ordinary injected coal, these materials are expected to alter the raceway slag properties and affect the coke reactivity. In the present article, the effect of the ash from different hydrogen‐rich carbonaceous materials on the raceway slag physicochemical properties as well as coke reactivity is reported. The melting characteristics of the ash briquettes in contact with the coke and wettability of the melted ash on the coke surface are determined visually using an optical heating microscope. The effect of the ash on the coke reactivity is studied by means of thermogravimetry under a continuous flow of CO2.
|
|
2. |
- Andersson, Anton, et al.
(författare)
-
A Method for Synthesizing Iron Silicate Slags to Evaluate Their Performance as Supplementary Cementitious Materials
- 2023
-
Ingår i: Applied Sciences. - : Mdpi. - 2076-3417. ; 13:14
-
Tidskriftsartikel (refereegranskat)abstract
- Utilizing iron silicate copper slag as supplementary cementitious material (SCM) is a means to improve resource efficiency and lower the carbon dioxide emissions from cement production. Despite multiple studies on the performance of these slags in SCM applications, the variations in cooling procedure, grinding, and methods for evaluating reactivity limit the ability to assess the influence of chemical composition on reactivity from the literature data. In this study, a methodology was developed to synthesize iron silicate slags, which were then evaluated for their inherent reactivity using the R-3 calorimeter-based experiments. The results demonstrated that laboratory-scale granulation produced the same reactivity as industrially granulated slag. Furthermore, a synthesized triplicate sample showed high repeatability. Based on these two aspects, this method can be used to systematically study the influence of chemical composition on the inherent reactivity of iron silicate slags while producing results that are directly translatable to industrial slags.
|
|
3. |
- Andersson, Anton, et al.
(författare)
-
Ground granulated iron silicate slag as supplementary cementitious material: Effect of prolonged grinding and granulation temperature
- 2023
-
Ingår i: Cleaner Materials. - : Elsevier. - 2772-3976. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- The metallurgical and cement industries contribute significantly to anthropogenic carbon dioxide emissions. Utilizing oxidic by-products from the metallurgical industry as supplementary cementitious materials (SCMs) can improve resource efficiency and reduce emissions from cement production. Iron silicate copper slags have been studied as SCMs, but mainly in systems where Portland cement is used as an activator. There is limited research on the inherent reactivity of the slag under changing processing conditions. The present study offers insight into the effect of granulation temperature and grinding on the inherent reactivity of an industrially produced iron silicate copper slag. The results showed that granulation temperature had an insignificant effect on reactivity, while grinding generated substantial improvements. The latter effect was concluded to stem from the increased specific surface area, increased number of sites for nucleation and growth of hydrates, and changes in the inherent reactivity owing to structural changes induced by the grinding.
|
|
4. |
- Andersson, Anton, et al.
(författare)
-
Insights into the Valorization of Electric Arc Furnace Slags as Supplementary Cementitious Materials
- 2023
-
Ingår i: Journal of Sustainable Metallurgy. - : Springer. - 2199-3823 .- 2199-3831. ; 10, s. 96-109
-
Tidskriftsartikel (refereegranskat)abstract
- The transition to hydrogen-based reduction processes within the iron and steelmaking industry will generate new types of slag compositions that require valorization routes. Using slags as supplementary cementitious materials (SCMs) addresses the carbon dioxide emissions of the cement industry since the SCM requires neither calcination nor clinkering. Conventionally, ironmaking slags from the blast furnace (BF) are recycled as SCMs, i.e., ground granulated BF slag (GGBS). Ideally, future slags from electric arc furnaces (EAFs) operating on hydrogen-based direct reduced iron should be valorized analogously. Since the hydrogen-based process route is not yet realized in an industrial scale, the literature lacks data to support this valorization route, and additionally, literature on scrap-based EAF slags is scarce. Therefore, the present study aimed to offer insights into the utilization of ore-based EAF slags as SCMs based on an industrial slag sample from an EAF operating on hot briquetted iron. The slag was remelted, modified, and water-granulated in laboratory scale, and its performance as an SCM was compared to water-granulated ladle slag and two commercial GGBS. The results showed promising reactivities measured using the R3 isothermal calorimeter-based testing protocol. Based on the comparison to GGBS, the study indicated that generating reactive and appropriate SCMs from EAF slags will partly be a challenge in balancing the crystallization of the MeO-type solid solution rich in magnesia and addressing the iron oxide content in the amorphous phase.
|
|
5. |
|
|
6. |
- Babanejad, Safoura, et al.
(författare)
-
High-Temperature Behavior of Spent Li-Ion Battery Black Mass in Inert Atmosphere
- 2022
-
Ingår i: Journal of Sustainable Metallurgy. - : Springer Nature. - 2199-3823 .- 2199-3831. ; 8, s. 566-581
-
Tidskriftsartikel (refereegranskat)abstract
- The increased demand for Li-ion batteries has prompted the scientific community to improve recycling routes in order to reuse the valuable materials in batteries. After their end-of-life, the batteries are collected, discharged, and mechanically disintegrated, generating plastic and metallic streams that are recycled directly; this leaves behind a small particle size fraction known as black mass (BM). BM is composed mainly of graphite and Li-metal complex oxides. Pyrometallurgy is a route known for recycling of BM, in which identifying the BM’s behavior at high temperatures is essential. In this study, two types of BM are characterized in two fractions of 150–700 µm and smaller than 150 µm. The thermal behavior of the BM is studied with thermal analysis techniques. The analyses demonstrate that the mineralogical and morphological properties of the two fractions do not significantly differ, while the amounts of C and organic materials might vary. When the BM was thermally treated, the binders decomposed until a temperature of 500 ℃ was reached, where the volatilization of hydrocarbons was observed, although F mostly persisted in the BM. The Li-metal oxide was partially reduced to lower oxides and Li carbonate at ⁓ 600 ℃, and the main mass loss was caused by carbothermic reduction immediately thereafter. As the products of this process, metallic Co and Ni phases were formed, and part of the graphite remained unreacted. Regarding the Li behavior, it was observed that in the presence of Al, AlLiO2 is the most likely composition to form, and it changes to LiF by increasing the F concentration in the composition.
|
|
7. |
|
|
8. |
- Isaksson, Jenny, et al.
(författare)
-
Improved Settling Mechanisms of an Industrial Copper Smelting Slag by CaO Modification
- 2023
-
Ingår i: Journal of Sustainable Metallurgy. - : Springer Nature. - 2199-3823 .- 2199-3831. ; 9:3, s. 1378-1389
-
Tidskriftsartikel (refereegranskat)abstract
- A significant source of copper losses from pyrometallurgical copper extraction is attributed to dissolved and entrained copper in discarded slag. Entrained copper can be recovered via pyrometallurgical slag cleaning in a settling furnace, where the slag viscosity and copper droplet size distribution (CDSD) are critical parameters. Reduced copper losses suggest improved raw material efficiency, and the slag becomes a more environmentally safe byproduct. In this study, iron silicate slags from a smelting furnace are industrially CaO modified in a fuming furnace to contain a CaO content between 8 and 18 wt.%. The viscosity of slags with and without CaO modifications is evaluated in the temperature range from 1423 to 1723 K. The influences of the CaO modifications on the CDSD, slag matrix copper content, and total copper content were determined. The results show that the slag viscosity decreases with increasing CaO concentrations in the slag. In addition, the copper content decreases in the slag phase, and the CDSD shifts to contain relatively larger droplets. The effect of CaO slag modification reveals a linear relationship between the overall copper recovery and viscosity, which increased from 63 to 88% when the viscosity in the respective batch was 0.51 and 0.25 Pa·s.
|
|
9. |
- Isaksson, Jenny, et al.
(författare)
-
Improved Settling Properties of Iron Silicate Slag by CaO Modifications
- 2023
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- One of the most significant sources of copper losses from pyrometallurgical copper extraction is attributed to dissolved and entrained copper in the discarded slag. The entrained copper can be recovered via pyrometallurgical slag cleaning in a settling furnace. Reduced copper losses mean increased smelter profits by improved raw material efficiency, and, in addition, the slag will become a more environmentally safe by-product. One way to increase the copper recovery during the settling process is to modify the slag to improve the properties that decrease copper solubility and slag viscosity. In this study, iron silicate slag was modified using CaCO3 on an industrial scale to evaluate its effect on the settling process. More specifically, the changes in settling were related to the modifications and measurements of slag viscosity and copper droplet size distributions in the slag. The trial was evaluated by comparing the copper content in different batches, the size distribution of copper-containing droplets using automated scanning electron microscopy, and performing rheological studies using a high-temperature rheometer. The results showed that increasing the CaO content of the slag by modification with CaCO3 has a positive effect on the settling process and is thus a possible method to improve the industrial settling process of valuable metals in slag.
|
|
10. |
- Isaksson, Jenny, et al.
(författare)
-
Industrial Slag Cleaning of Reduced Iron Silicate Slag - Effect of Process Parameters and Slag Modification
- 2022
-
Ingår i: Proceedings of Copper 2022 international conference. ; , s. 22-40
-
Konferensbidrag (refereegranskat)abstract
- During primary copper sulfide smelting and converting, one of the main copper losses is to the slag, which decreases the overall copper recovery. To decrease the copper losses, which are mechanically entrained or dissolved, a slag cleaning route can be used. At the Boliden Rönnskär smelter in Sweden, the slag from the smelting furnace is treated under reducing conditions in a fuming furnace and then tapped into an electric settling furnace where the copper is separated from the slag under the action of gravity. A trial was conducted in the settling furnace at the Rönnskär smelter to increase the knowledge of the copper content in slag and how the process parameters temperature and settling time influence the final slag copper content. The slag was also modified with CaO, to enhance the slag properties for an increased settling velocity and thus decreased copper content. The trial was evaluated by collecting multiple samples of the ingoing and outgoing slag and then compare the slag copper content in the samples. The results showed that the copper content increased with increasing temperature and decreased when the slag was modified with CaO, both parameters had a more pronounced effect compared to the settling time. The slag was also characterized showing that copper was associated with spinels and bubbles, which hinders the settling.
|
|
11. |
- Isaksson, Jenny, et al.
(författare)
-
Influence of process parameters on copper content in reduced iron silicate slag in a settling furnace
- 2021
-
Ingår i: Metals. - : MDPI. - 2075-4701. ; 11:6
-
Tidskriftsartikel (refereegranskat)abstract
- During the pyrometallurgical extraction of copper, a significant fraction of this metal is lost with discard slag, which decreases profits and overall copper recovery. These copper losses can be reduced by using a settling furnace, in which suspended droplets containing copper separate from slag under the influence of gravity. An industrial trial was conducted in a settling furnace to increase the knowledge of the effect of temperature and settling time on the copper content of slag, and thus enhance the settling process to increase copper recovery. Slag samples were collected from four sample points: the ingoing and outgoing slag stream, within the furnace during settling, and the granulated slag. The chemical composition of the slag samples was analyzed and compared between batches with different temperatures and settling times. The appearance of copper and its associated phases were analyzed using a scanning electron microscope with an energy‐dispersive X‐ray spectroscopy detector (SEM‐EDS). The results indicated that the outgoing slag copper content increased with an increase in temperature, and it was also concluded to be influenced by the attachment of copper to spinels and gas bubbles. The results indicate that regulating the settling furnace temperature to a lower interval could increase copper recovery.
|
|
12. |
- Isaksson, Jenny, et al.
(författare)
-
Interactions of Crucible Materials With an FeOx–SiO2–Al2O3 Melt and Their Influence on Viscosity Measurements
- 2023
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - : Springer Nature. - 1073-5615 .- 1543-1916. ; 54:6, s. 3526-3541
-
Tidskriftsartikel (refereegranskat)abstract
- Viscosity is a critical parameter during metal extraction, influencing the settling of valuabledroplets, slag handling, and mass transfer. The viscosity of oxide melts can be measured withhigh-temperature rheometers. During such measurements, interactions between the crucible andthe oxide system can change the chemical composition, melt structure, and thus the viscosity.For increased reliability of viscosity measurements, the influence of crucible and spindlematerials on viscosity must be studied. In this study, the viscosity of a syntheticFeOx–SiO2–Al2O3 melt was measured using the rotating spindle technique and three differentcrucible and spindle materials (Mo, Fe, and Ni) to determine the interactions with the melt andthe influence on viscosity. The interaction was evaluated by comparing the post-experimentalchemical analyses, the Fe/Fe2+/Fe3+ content, visual observations, and using scanning electronmicroscopy–energy dispersive spectroscopy (SEM–EDS). The results showed that all thecrucibles partially dissolved into the melt, affecting the melt structure, composition, and, thus,the viscosities. The viscosity data obtained using the Mo setup interacted the least with the melt,was the most stable, and with the best reproducibility.
|
|
13. |
- Isaksson, Jenny
(författare)
-
Settling Mechanisms of Valuable Metal Droplets in Iron Silicate Slag
- 2023
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- A significant source of copper losses from pyrometallurgical copper extraction is attributed to dissolved and entrained copper in discarded slag. Entrained copper can be recovered via pyrometallurgical slag cleaning in a settling furnace where the droplets settle under gravity. Reduced copper losses suggest improved raw material efficiency, and the slag becomes a more environmentally safe byproduct as it contains less copper and its associated elements. The copper content in the discarded slag often equals or is higher than in the copper ore, implying that the copper slag is a valuable secondary resource for copper.The settling velocity of droplets and, thus, the metal recovery depends on the slag viscosity, copper droplet size distribution, dissolved copper content, and density difference between the slag phase and the copper droplets. The process parameters, temperature and settling time, theoretically affect the copper recovery, where an extended settling time means that droplets have a longer time to settle, and the temperature affects the viscosity, where a higher temperature means a lower viscosity and thus a higher settling rate. However, the temperature also affects the copper solubility; therefore, the overall effect of temperature on the copper recovery during industrial settling processes is unknown. Modifying the slag composition is another option to alter the viscosity and copper solubility. CaO has experimentally been shown to affect both factors in iron silicate slag positively and is thus a potential modifier for increased copper recovery in a settling process. However, there is a knowledge gap regarding the industrial CaO slag modification in a settling process and the effect on copper droplet size distribution, dissolved copper content, copper recovery, and the relationship between recovery and viscosity. Further research is necessary to bridge the knowledge gap and explore the potential benefits of CaO slag modification for improved copper recovery.Within the scope of this thesis, an industrial trial was conducted with the identified factors, temperature, settling time, and CaO slag modification to gain knowledge of the effect on the industrial settling process. The trial was evaluated by performing a slag characterization focusing on the appearance of copper and its associated elements and phases, copper droplet size distribution, slag matrix copper content, and investigating the slag copper content, copper recovery, and slag viscosity. The results showed that the copper droplets were mainly copper matte and speiss and were primarily associated with the slag phase and occasionally with a chromium-rich spinel and bubbles, which can hinder the settling. The results suggested that the viscosity and slag matrix copper content decreased when the slag was modified with CaO, and the copper droplet size distribution shifted to contain larger droplets. The CaO modification resulted in a higher copper recovery, revealing a linear relationship between the overall recovery and the viscosity.A crucible and spindle material with minimum interaction and influence on viscosity had to be identified to perform the viscosity measurement. Iron silicate slags are the dominating slag used during pyrometallurgical copper extraction of Cu-Fe-S concentrates. The dissolution of the crucible and spindle material into the melt is often analyzed and reported. However, the influence on viscosity is rarely investigated and reported. Three crucibles were studied, Mo, Ni, and Fe, concluding that Mo was preferable for viscosity measurements as it interacted the least with the melt and gave the most stable measurements with the highest reproducibility. Mo was thus the crucible choice for viscosity measurements of the industrial slag with and without CaO modifications. Based on the results from the industrial trial and the experimental evaluation, it was concluded that it is difficult to see an effect of regulating the temperature and settling time in the settling furnace process. It was, however, possible to increase the copper recovery by industrial CaO slag modification, which contributes to an increased raw material efficiency and, thus, a more sustainable pyrometallurgical copper extraction.
|
|
14. |
- Isaksson, Jenny, et al.
(författare)
-
Settling of copper phases in lime modified iron silicate slag
- 2021
-
Ingår i: Metals. - : MDPI. - 2075-4701. ; 11:7
-
Tidskriftsartikel (refereegranskat)abstract
- Copper in discarded slag decreases the profits and copper recovery during the pyrometallurgical extraction processes. The copper losses to slag can be reduced by using a settling furnace, in which mechanically entrained copper droplets separate from the slag under the action of gravity. The settling rate of entrained droplets can be increased by modifying the slag composition and, thus, the slag properties, which are known to influence the settling rate. The knowledge of industrial CaO slag modification in a reduced iron silicate slag with a Fe/SiO2 ratio close to unity is limited. An industrial trial was thus conducted in an electric settling furnace, where the slag had been pretreated in a fuming furnace, to investigate the effect of CaO slag modification on the final slag copper content. Slag samples were collected from the ingoing and outgoing slag and from within the furnace of batches modified with CaO up to about 16 wt %. The trial was evaluated by comparing the final slag copper content and the copper recovery in the settling furnace. The results indicate that the settling becomes more efficient with the CaO modification as the final slag copper content decreased with increasing CaO content.
|
|
15. |
- Isaksson, Jenny
(författare)
-
Slag Cleaning of a Reduced Iron Silicate Slag by Settling : Influence of Process Parameters and Slag Modification on Copper Content
- 2021
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- During the pyrometallurgical extraction of copper, a significant part of the copper is lost with discard slag, which decreases profits, overall copper recovery, and efficiency of raw material usage. Smelting furnace slag usually has a copper content that is close to or higher than that of copper ores. The investigation of copper losses to slag is thus a task of practical significance, as the ore grades are depleting. Slag cleaning, e.g., a settling furnace, can reduce copper losses to slag as the mechanically suspended copper-containing droplets separate from slag under the action of gravity and can hence be recovered. An industrial trial was conducted in an electric settling furnace with slag originating from an electric smelting furnace and processed in a zinc fuming furnace. The trial was conducted to increase the understanding of copper losses to slag and how the process parameters temperature and settling time influence the slag copper content. The obtained slag samples were also evaluated to gain better insights as to the settling mechanism and, if any, factors that hinder the copper phases from settling. Slag modification with CaO was also evaluated to investigate how the modification influences the settling of copper phases and, thus, the final slag copper content. Samples collected during the industrial trial were the basis for the evaluation in the current work. The samples came from batches with varying temperatures, settling times, and CaO content collected at four different sample positions. Instrumental techniques, including XRF, FAAS, ICP-SFMS, and SEM-EDS, were used to analyze the chemical compositions of the samples and the appearance of copper and associated phases. The results indicated that the copper content of outgoing slag increased with increasing temperature in the evaluated interval. The copper content was also concluded to be more strongly affected by the temperature compared to the settling time. Regulating the temperature to the lower temperature interval in the settling furnace could thus decrease the final slag copper content. During the slag characterization, it was found that suspended copper-containing phases were hindered from settling, due to the attachment to solid phases and gas bubbles in the slag. By controlling and minimizing the presence of the bottom buildup and thus solid phases in the slag, the copper content can be decreased. The results indicated that the CaO slag modification decreased the final slag copper content, and can thus be used as a modifier for increased settling.
|
|
16. |
- Kalushkova, Antonia, et al.
(författare)
-
One Omics Approach Does Not Rule Them All : The Metabolome and the Epigenome Join Forces in Haematological Malignancies
- 2021
-
Ingår i: EPIGENOMES. - : MDPI. - 2075-4655. ; 5:4
-
Tidskriftsartikel (refereegranskat)abstract
- Aberrant DNA methylation, dysregulation of chromatin-modifying enzymes, and microRNAs (miRNAs) play a crucial role in haematological malignancies. These epimutations, with an impact on chromatin accessibility and transcriptional output, are often associated with genomic instability and the emergence of drug resistance, disease progression, and poor survival. In order to exert their functions, epigenetic enzymes utilize cellular metabolites as co-factors and are highly dependent on their availability. By affecting the expression of metabolic enzymes, epigenetic modifiers may aid the generation of metabolite signatures that could be utilized as targets and biomarkers in cancer. This interdependency remains often neglected and poorly represented in studies, despite well-established methods to study the cellular metabolome. This review critically summarizes the current knowledge in the field to provide an integral picture of the interplay between epigenomic alterations and the cellular metabolome in haematological malignancies. Our recent findings defining a distinct metabolic signature upon response to enhancer of zeste homolog 2 (EZH2) inhibition in multiple myeloma (MM) highlight how a shift of preferred metabolic pathways may potentiate novel treatments. The suggested link between the epigenome and the metabolome in haematopoietic tumours holds promise for the use of metabolic signatures as possible biomarkers of response to treatment.
|
|
17. |
- Mareschal, Sylvain, et al.
(författare)
-
Challenging conventional karyotyping by next-generation karyotyping in 281 intensively treated patients with AML
- 2021
-
Ingår i: Blood Advances. - : American Society of Hematology. - 2473-9529 .- 2473-9537. ; 5:4, s. 1003-1016
-
Tidskriftsartikel (refereegranskat)abstract
- Although copy number alterations (CNAs) and translocations constitute the backbone of the diagnosis and prognostication of acute myeloid leukemia (AML), techniques used for their assessment in routine diagnostics have not been reconsidered for decades. We used a combination of 2 next-generation sequencing-based techniques to challenge the currently recommended conventional cytogenetic analysis (CCA), comparing the approaches in a series of 281 intensively treated patients with AML. Shallow whole-genome sequencing (sWGS) outperformed CCA in detecting European Leukemia Net (ELN)-defining CNAs and showed that CCA overestimated monosomies and suboptimally reported karyotype complexity. Still, the concordance between CCA and sWGS for all ELN CNA-related criteria was 94%. Moreover, using in silico dilution, we showed that 1 million reads per patient would be enough to accurately assess ELN-defining CNAs. Total genomic loss, defined as a total loss 200 Mb by sWGS, was found to be a better marker for genetic complexity and poor prognosis compared with the CCA-based definition of complex karyotype. For fusion detection, the concordance between CCA and whole-transcriptome sequencing (WTS) was 99%. WTS had better sensitivity in identifying inv(16) and KMT2A rearrangements while showing limitations in detecting lowly expressed PML-RARA fusions. Ligation-dependent reverse transcription polymerase chain reaction was used for validation and was shown to be a fast and reliable method for fusion detection. We conclude that a next-generation sequencing-based approach can replace conventional CCA for karyotyping, provided that efforts are made to cover lowly expressed fusion transcripts.
|
|
18. |
- Mujahed, Huthayfa, et al.
(författare)
-
AML displays increased CTCF occupancy associated with aberrant gene expression and transcription factor binding
- 2020
-
Ingår i: Blood. - : American Society of Hematology. - 0006-4971 .- 1528-0020. ; 136:3, s. 339-352
-
Tidskriftsartikel (refereegranskat)abstract
- CCTC-binding factor (CTCF) is a key regulator of gene expression through organization of the chromatin structure. Still, it is unclear how CTCF binding is perturbed in leukemia or in cancer in general. We studied CTCF binding by chromatin immunoprecipitation sequencing in cells from patients with acute myeloid leukemia (AML) and in normal bone marrow (NBM) in the context of gene expression, DNA methylation, and azacitidine exposure. CTCF binding was increased in AML compared with NBM. Aberrant CTCF binding was enriched for motifs for key myeloid transcription factors such as CEBPA, PU.1, and RUNX1. AML with TET2 mutations was characterized by a particularly strong gain of CTCF binding, highly enriched for gain in promoter regions, while AML in general was enriched for changes at enhancers. There was a strong anticorrelation between CTCF binding and DNA methylation. Gain of CTCF occupancy was associated with increased gene expression; however, the genomic location (promoter vs distal regions) and enrichment of motifs (for repressing vs activating cofactors) were decisive for the gene expression pattern. Knockdown of CTCF in K562 cells caused loss of CTCF binding and transcriptional repression of genes with changed CTCF binding in AML, as well as loss of RUNX1 binding at RUNX1/CTCF-binding sites. In addition, CTCF knockdown caused increased differentiation. Azacitidine exposure caused major changes in CTCF occupancy in AML patient cells, partly by restoring a CTCF-binding pattern similar to NBM. We conclude that AML displays an aberrant increase in CTCF occupancy that targets key genes for AML development and impacts gene expression.
|
|
19. |
- Prasad, Pande Nishant, et al.
(författare)
-
A Mineralogical Investigation of Sintering in Cu-Rich Polymetallic Concentrates During Roasting in Inert Atmosphere
- 2020
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - : Springer. - 1073-5615 .- 1543-1916. ; 51:4, s. 1446-1459
-
Tidskriftsartikel (refereegranskat)abstract
- Four different Cu-rich polymetallic concentrates (additionally comprising Zn, Pb and impurity elements As, Sb) from various deposits in Sweden are examined, in particular for the sintering tendency during roasting in inert atmosphere. Experiments performed in a laboratory-scale roasting setup between 200 °C and 700 °C in intervals of 100 °C revealed that significant sintering initiates from 500 °C for all four concentrates. Two sintering mechanisms are determined from the examination of the sintered calcines: (1) solid-state assimilation of Cu-, Zn- and Fe-bearing main sulphide minerals to form a high-temperature solid solution, the iss phase belonging to the Cu-Fe-Zn-S system; (2) low-melting liquid phase formation due to partial melting of galena facilitated by the presence of impurity-bearing minerals, mainly the arsenopyrite and Sb sulphosalts such as tetrahedrite. Galena also forms a melt below 700 °C with the iss phase. Therefore, the presence of galena in polymetallic concentrates generally increases the susceptibility to early sintering. These experiments in inert atmosphere facilitate a fundamental study with practical relevance to the roasting in low oxidation potential environments, favourable for volatilization of impurity elements such as As and Sb.
|
|
20. |
- Prasad, Pande Nishant, et al.
(författare)
-
A Mineralogical Investigation on Volatilization of Impurity Elements from Cu-Rich Polymetallic Concentrates During Roasting in Inert Atmosphere
- 2021
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - : Springer. - 1073-5615 .- 1543-1916. ; 52:2, s. 764-777
-
Tidskriftsartikel (refereegranskat)abstract
- Four different Cu-rich polymetallic concentrates are tested for volatilization of Sb and As during laboratory-scale roasting. The experiments are performed between 200 °C and 700 °C, at intervals of 100 °C and in an inert atmosphere. Sb volatilization is much less (maximum approximately 45 pct) than As volatilization (maximum approximately 95 pct) in these conditions at 700 °C. As volatilization is however limited from the concentrate having As mainly in a tetrahedrite solid solution ((Cu,Ag,Fe,Zn)12(Sb,As)4S13). Sb and As retained in the roasted calcine are found in the low-melting liquid phase, formed at approximately 500 °C. This melt phase gets enlarged and enriched in Sb with an increase in temperature. However, there is noticeable As volatilization from this melt phase with the temperature approaching 700 °C. Furthermore, there is an early and relatively high Sb volatilization from the concentrate having Sb substantially as gudmundite. Micron-scale elemental redistribution in gudmundite in the 350 °C roasted calcine confirms its transformation at this temperature. Other Sb minerals did not undergo any detectable transformation at this temperature, suggesting that the significant Sb volatilization starting between 300 °C and 400 °C was primarily from gudmundite. This benign attribute of gudmundite featured in this work in the context of roasting should also be relevant from the geometallurgical perspective during concentrate production, where concentrates bearing Sb are considered substandard for further Cu extraction irrespective of the Sb mineralogy.
|
|
21. |
- Prasad, Pande Nishant, et al.
(författare)
-
Redistribution of Minor and Trace Elements During Roasting of Cu-Rich Complex Concentrate in Inert Atmosphere
- 2022
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - : Springer. - 1073-5615 .- 1543-1916. ; 53:3, s. 1875-1893
-
Tidskriftsartikel (refereegranskat)abstract
- A Cu-rich polymetallic complex concentrate produced at the Garpenberg Mines of Boliden Mineral AB, Sweden is investigated. Roasting at 700 °C in N2 leads to extensive liquid formation. The calcine obtained after cooling down to the room temperature is found to be severely sintered, entrapping numerous melt nuggets. This work focuses on analyzing redistribution of the minor (Ag) and trace elements consequent to the roasting treatment. Advanced micro-analytical techniques such as quantitative evaluation of minerals by scanning electron microscopy (QEMSCAN), laser-ablation inductively coupled plasma-mass spectrometry (ICP-MS) and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS) are used in conjunction for detailed characterization of the initial concentrate and the roasted calcine, especially the melt nuggets (which symbolizes the phases which were molten at 700 °C). The minor element—Ag is primarily in the silver-antimonide and tetrahedrite mineral phases in the initial concentrate. Ag separates out of tetrahedrite when the later interacts with galena to form a liquid phase. Furthermore, Mn, Cd, Tl and Hg are the relevant trace elements in the Garpenberg concentrate. Sphalerite is the major host of Mn, Cd and Hg. Tl is mainly in galena. Consequent to liquid formations at 700 °C, the trace elements redistribute and tend to segregate in low-melting phase-fractions. Statistical methods such as correlation matrices and clustering analysis are used effectively in evaluating the data from laser-ablation ICP-MS measurements on sulphide samples.
|
|
22. |
- Prasad, Pande Nishant
(författare)
-
Roasting of Cu-rich complex concentrates - A mineralogical investigation
- 2023
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Copper has assumed importance as a metal which is essential for realization of a sustainable modern society. Demand for copper is sharply increasing, and a supply shortfall is shortly anticipated. Such a scenario could adversely affect some of the major transformations directed toward reversal of climate change. Consequently, it is crucial to efficiently utilize all the resources available for copper extraction. This thesis investigates the challenges associated with Cu-rich complex concentrates, which are scantily used in the mainstream pyrometallurgical route of Cu-extraction. The roasting step, at the start of the pyrometallurgical-route is expected to resolve certain complexities in the incoming concentrate feed, for instance, through partial volatilization of the minor deleterious elements – As, Sb. Therefore, evaluation of the behavior of Cu-rich complex concentrates during roasting is the focus of the current study.Cu-rich complex concentrates are generally polymetallic, containing numerous major, minor and trace elements. In reality, these numerous elements in a complex concentrate occur as multiple sulphide and sometimes also as non-sulphide minerals. In this work, four Cu-rich complex concentrates are investigated for their initial mineralogy, followed by their evaluation in laboratory-scale roasting experiments between 200-700oC in inert atmosphere. These complex concentrates were produced from the Rockliden, Garpenberg and Maurliden deposits of Boliden Mineral AB in Sweden. Though industrial roasting involves a partially oxidative environment, the roasting experiments in this work were performed in an inert atmosphere which could be collectively used as a reference for future roasting experiments at higher oxidation potential. The main objective of the roasting experiments in inert atmosphere was to determine various features of the mineralogical interactions which could occur up to 700oC.The selected concentrates were found to comprise the: (1) major minerals – chalcopyrite, sphalerite, pyrite and galena; (2) minor minerals – sulfosalt and sulfarsenide minerals of As and Sb, also including a non-sulphur bearing mineral – silver antimonide, and; (3) trace elements – Cd, Mn, Hg (hosted by sphalerite) and Tl (hosted by galena). The high-temperature physicochemical interaction between the different minerals mainly involved – (1) solid-state assimilation of Cu-, Fe- and Zn-bearing minerals to form the ‘iss-phase’ existing in CuS-FeS-ZnS ternary system b) low-melting liquid formation through interactions between galena and the As/Sb-bearing minor minerals, starting from 400-500oC.The Sb- and As-volatilizations were relatively higher from sulfarsenide minerals (such as arsenopyrite (FeAsS) and gudmundite (FeSbS)) compared to the As/Sb-bearing sulfosalt minerals.Evaluation of condensates produced during the roasting experiments provided an indirect assertion of the previous findings regarding the formation of heteronuclear compounds, As4-nSbnS6(g) during simultaneous Sb- and As-volatilizations. Microstructural evaluations of the solidified melts suggested existence of multiple immiscible liquids at the roasting temperature. Liquid formation and subsequent cooling facilitated redistribution of the minor and trace elements. Most of the trace elements segregated in the phase which was the last liquid to solidify during cooling. These fundamental insights about the involved complexities could help in developing newer processes enabling increased usage of complex concentrates in Cu-extraction.
|
|
23. |
- Prasad, Pande Nishant, et al.
(författare)
-
Volatilized and Condensed Sb- and As-Bearing Phases Produced During Roasting of Cu-Rich Complex Concentrate in Nitrogen Atmosphere with Oxygen in Traces
- 2021
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - : Springer. - 1073-5615 .- 1543-1916. ; 52:3, s. 1866-1885
-
Tidskriftsartikel (refereegranskat)abstract
- A Cu-rich complex sulpfide concentrate (containing Sb as sulphosalts and gudmundite, and As as arsenopyrite) is roasted in Nitrogen atmosphere carrying traces of oxygen (pO2≈10−5.3 bar). In situ measurements through QMS indicated that the volatilized species are mainly elemental sulfur, S2(g), and gaseous sulfur oxides. Sb- and As-bearing volatilized species could not be detected, owing to their low concentrations in the gas phase. Characterization studies through XRD and SEM-EDS confirmed that the condensates collected at room temperature during the roasting experiments comprised of (1) cyclo-octa sulfur, S8(s) and polysulfur oxides, Sn−xOx(s); (2) amorphous trisulfides of Sb and As; (3) and cubic crystalline trioxides of Sb and As. The solid phases in the condensate were found to be fine-sized (sub-micronic) and widely intermixed. Consequently, quantification of the solid phases in the condensates through direct measurement techniques like QEMSCAN was not possible. A novel approach of partial quantification of solid phases in the condensate through a stochastic model-based calculation approach is also presented. The model results suggested the occurrence of vapor-phase complexation of sulfides of Sb and As in the gas phase. Additional attributes of the volatilized species could be determined through a thermodynamic equilibrium calculation showing that the formation of the complex oxides, As4−nSbnO6(g), would be negligible compared to that of the complex sulfides, As4−nSbnS6(g).
|
|
24. |
- Strandkvist, Ida, et al.
(författare)
-
Minimizing Chromium Leaching from Low-Alloy Electric Arc Furnace (EAF) Slag by Adjusting the Basicity and Cooling Rate to Control Brownmillerite Formation
- 2020
-
Ingår i: Applied Sciences. - : MDPI. - 2076-3417. ; 10:1, s. 35-50
-
Tidskriftsartikel (refereegranskat)abstract
- Brownmillerite is connected to chromium leaching when present in steel slags. To prevent chromium leaching, brownmillerite in slag should be prevented. Two methods for decreasing brownmillerite content in low-alloy electric arc furnace (EAF) slag were investigated: decreasing the basicity and increasing the cooling rate. The methods were tried on both laboratory scale and in full-scale production. In the laboratory scale experiments, chromium leaching decreased as the basicity decreased until brownmillerite was no longer present, slower cooling resulted in increased chromium leaching, and faster cooling decreased chromium leaching. In full-scale production, basicity modified single batches, with a basicity below 2.2, generally leached less chromium than slag batches with higher basicity, thus verifying the correlation between basicity and chromium leaching seen in laboratory scale experiments. The cooling process in the full-scale experiments was achieved either by letting the slag cool by itself in the air or by water spraying. The water-sprayed slag, which cooled faster, had less chromium leaching than the air-cooled slag. The full-scale production experiments confirmed that both decreasing basicity below 2.2 and increasing the rate of cooling could be used to decrease chromium leaching.
|
|