| 1. |
- Liu, Yujie, 1995-, et al.
(författare)
-
Voltammetric Ion-Selective Electrodes in Thin-Layer Samples : Absolute Detection of Ions Using Ultrathin Membranes
- 2024
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 96:3, s. 1147-1155
-
Tidskriftsartikel (refereegranskat)abstract
- Calibration-free sensors are generally understood as analytical tools with no need for calibration apart from the initial one (i.e., after its fabrication). However, an "ideal" and therefore "more restricted" definition of the concept considers that no calibration is necessary at all, with the sensor being capable of directly providing the analyte concentration in the sample. In the electroanalysis field, investigations have been directed to charge-based readouts (i.e., coulometry) that allow for concentration calculation via the Faraday Law: The sample volume must be precisely defined and the absoluteness of the electrochemical process in which the analyte is involved must be ensured (i.e., the analyte in the sample is similar to 100% converted/transported). Herein, we report on the realization of calibration-free coulometric ISEs based on ultrathin ion-selective membranes, which is demonstrated for the detection of potassium ions (K+). In essence, the K+ transfer at the membrane-sample interface is modulated by the oxidation state of the conducting polymer underlying the membrane. The accumulation/release of K+ to/from the membrane is an absolute process owing to the confinement of the sample to a thin-layer domain (thickness of <100 mu m). The capacity of the membrane expressed in charge is fixed to ca. 18 mu C, and this dictates the detection of micromolar levels of K+ present in ca. 5 mu L sample volume. The system is interrogated with cyclic voltammetry to obtain peaks related to the K+ transfer that can be treated charge-wise. The conceptual and technical innovative steps developed here made the calibration-free detection of K+ possible in artificial and real samples with acceptable accuracy (<10% difference compared with the results obtained from a current-based calibration and ion chromatography). The charge-based analysis does not depend on temperature and appeared to be repetitive, reproducible, and reversible in the concentration range from 1 to 37.5 mu M, with an average coulometry efficiency of 96%.
|
|
| 2. |
- Wang, Kai, et al.
(författare)
-
Zinc anode based alkaline energy storage system: Recent progress and future perspectives of zinc–silver battery
- 2024
-
Ingår i: Energy Storage Materials. - 2405-8297. ; 69
-
Forskningsöversikt (refereegranskat)abstract
- Rechargeable zinc-based batteries have come to the forefront of energy storage field with a surprising pace during last decade due to the advantageous safety, abundance and relatively low cost, making them important supplements of lithium-ion batteries. As a significant role in zinc-based batteries, zinc-silver battery owns the advantages of high specific energy density, stable working voltage, high charging efficiency, safety and environmental friendliness, and it has been widely used in military such as in aerospace, deep water manned and civil field such as energy supply for watch and hearing aid. However, it is still suffering from a few drawbacks such as unsatisfactory cycle life, low utilization of the cathode. This review introduces the basic principles of zinc-silver batteries and elaborates the battery configurations aiming to understand its working mechanisms as well as the related issues. Most importantly, the very recent research updates and the concerns have arisen in the development are summarized from conventional cell to flexible device and hybrid device. Finally, the challenges and perspectives of zinc-silver batteries are further prospected to give a broad idea to readers new in the area and trigger inspirations for motivated researchers to further widen the utilization of silver-zinc batteries.
|
|
