| 1. |
- Alriksson, Stina, 1971-, et al.
(författare)
-
Temporal risk assessment – 20th century Pb emissions to air and exposure via inhalation in the Swedish glass district
- 2023
-
Ingår i: Science of the Total Environment. - : Elsevier. - 0048-9697 .- 1879-1026. ; 858:1
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of the present study was to assess historical emissions of Pb to air around a number of glassworks sites in southeastern Sweden, and the possible implications for human exposure. To do so, a four-step method was applied. First, emissions of Pb to air around 10 glassworks were modelled for the 20th century. Second, an assessment of the resulting exposure was made for a number of scenarios. Third, the number of people potentially exposed at different times was estimated, and fourth, measurements of “current” Pb concentrations in PM10 material from four sites were conducted in 2019. The results show that the highest emissions, and exposures, occurred from 1970 to1980. It coincides with the time period when the highest number of people resided in the villages. At this time, the average Pb concentration in air around the six largest factories was about 2.4 μg Pb/m3, i.e. 16 times the present US national ambient air quality standard (NAAQS) of 0.15 μg Pb/m3. By year 2000 the modelled average concentration had dropped to 0.05 μg Pb/m3, a level that is normal for urban regions today. The PM10 measurements from 2019 indicate a further decline, now with a mean value of about 0.02 μg Pb/m3. Over the entire study period, inhalation hazard quotients (HQs) exceeded the dietary HQ by many orders of magnitude, indicating that inhalation has been the most prevalent exposure pathway in the past. At present, both pathways are judged to be associated with low exposures. Even if only roughly approximated, a picture of the historical exposure can increase our understanding of the connection between exposure and disease, and can be valuable when risks are to be communicated to residents near contaminated areas.
|
|
| 2. |
- Assenhöj, Maria, et al.
(författare)
-
Metal exposure from additive manufacturing and its effect on the nasal lavage fluid proteome - a pilot study
- 2021
-
Ingår i: PLOS ONE. - : Public Library of Science. - 1932-6203. ; 16:8
-
Tidskriftsartikel (refereegranskat)abstract
- The use of metal additive manufacturing (AM) is steadily increasing and is an emerging concern regarding occupational exposure. In this study, non-invasive sampled nasal lavage fluid (NLF) from the upper airways was collected from metal AM operators at the beginning and end of a workweek during two consecutive years with preventive interventions in the occupational setting in-between (n = 5 year 1, n = 9 year 2). During year one, NLF was also collected from welders (n = 6) from the same company to get a comparison with a traditional manufacturing technique with known exposure and health risks. The samples were investigated using untargeted proteomics, as well as using multi-immunoassay to analyze a panel of 71 inflammatory protein markers. NLF in AM operators from year 1 showed decreased levels of Immunoglobulin J and WAP four-disulfide core domain protein 2 and increased levels of Golgi membrane protein 1, Uteroglobin and Protein S100-A6 at the end of the workweek. At year two, after preventive interventions, there were no significant differences at the end of the workweek. In welders, Annexin A1 and Protein S100-A6 were increased at the end of the workweek. The analysis of 71 inflammatory biomarkers showed no significant differences between the beginning and the end of workweek year 1 in AM operators. We identified several proteins of interest in the AM operators that could serve as possible markers for exposure in future studies with a larger cohort for validation.
|
|
| 3. |
- Assenhöj, Maria, et al.
(författare)
-
Occupational exposure and health surveys at metal additive manufacturing facilities
- 2023
-
Ingår i: Frontiers In Public Health. - : FRONTIERS MEDIA SA. - 2296-2565. ; 11
-
Tidskriftsartikel (refereegranskat)abstract
- Introduction: Additive manufacturing is a novel state-of-the art technology with significant economic and practical advantages, including the ability to produce complex structures on demand while reducing the need of stocking materials and products. Additive manufacturing is a technology that is here to stay; however, new technologies bring new challenges, not only technical but also from an occupational health and safety perspective. Herein, leading Swedish companies using metal additive manufacturing were studied with the aim of investigating occupational exposure and the utility of chosen exposure- and clinical markers as predictors of potential exposure-related health risks.Methods: Exposure levels were investigated by analysis of airborne dust and metals, alongside particle counting instruments measuring airborne particles in the range of 10 nm-10 mu m to identify dusty work tasks. Health examinations were performed on a total of 48 additive manufacturing workers and 39 controls. All participants completed a questionnaire, underwent spirometry, and blood and urine sampling. A subset underwent further lung function tests.Results: Exposure to inhalable dust and metals were low, but particle counting instruments identified specific work tasks with high particle emissions. Examined health parameters were well within reference values on a group level. However, statistical analysis implied an impact on workers kidney function and possible airway inflammation.Conclusion: The methodology was successful for investigating exposure-related health risks in additive manufacturing. However, most participants have been working <5 years. Therefore, long-term studies are needed before we can conclusively accept or reject the observed effects on health.
|
|
| 4. |
- Assenhöj, Maria, et al.
(författare)
-
Protein interaction, monocyte toxicity and immunogenic properties of cerium oxide crystals with 5% or 14% gadolinium, cobalt oxide and iron oxide nanoparticles–an interdisciplinary approach
- 2021
-
Ingår i: Nanotoxicology. - : Taylor and Francis Ltd.. - 1743-5390 .- 1743-5404. ; 15:8, s. 1035-1038
-
Tidskriftsartikel (refereegranskat)abstract
- Metal oxide nanoparticles are widely used in both consumer products and medical applications, but the knowledge regarding exposure-related health effects is limited. However, it is challenging to investigate nanoparticle interaction processes with biological systems. The overall aim of this project was to improve the possibility to predict exposure-related health effects of metal oxide nanoparticles through interdisciplinary collaboration by combining workflows from the pharmaceutical industry, nanomaterial sciences, and occupational medicine. Specific aims were to investigate nanoparticle-protein interactions and possible adverse immune reactions. Four different metal oxide nanoparticles; CeOx nanocrystals with 5% or 14% Gd, Co3O4, and Fe2O3, were characterized by dynamic light scattering and high-resolution transmission electron microscopy. Nanoparticle-binding proteins were identified and screened for HLA-binding peptides in silico. Monocyte interaction with nanoparticle–protein complexes was assessed in vitro. Herein, for the first time, immunogenic properties of nanoparticle-binding proteins have been characterized. The present study indicates that especially Co3O4-protein complexes can induce both ‘danger signals’, verified by the production of inflammatory cytokines and simultaneously bind autologous proteins, which can be presented as immunogenic epitopes by MHC class II. The clinical relevance of these findings should be further evaluated to investigate the role of metal oxide nanoparticles in the development of autoimmune disease. The general workflow identified experimental difficulties, such as nanoparticle aggregate formation and a lack of protein-free buffers suitable for particle characterization, protein analyses, as well as for cell studies. This confirms the importance of future interdisciplinary collaborations. © 2021 The Author(s).
|
|
| 5. |
- Beazer, Jack D., et al.
(författare)
-
High-density lipoproteins vascular protective functions in metabolic and cardiovascular disease - could extracellular vesicles be at play?
- 2020
-
Ingår i: Clinical Science. - : Portland Press on behalf of the Medical Research Society and the Biochemical Society. - 0143-5221 .- 1470-8736. ; 134:22, s. 2977-2986
-
Forskningsöversikt (refereegranskat)abstract
- High-density lipoprotein (HDL) is a circulating complex of lipids and proteins known primarily for its role in reverse cholesterol transport and consequent protection from atheroma. In spite of this, therapies aimed at increasing HDL concentration do not reduce the risk of cardiovascular disease (CVD), and as such focus has shifted towards other HDL functions protective of vascular health - including vasodilatory, anti-inflammatory, antioxidant and anti-thrombotic actions. It has been demonstrated that in disease states such as CVD and conditions of insulin resistance such as Type 2 diabetes mellitus (T2DM), HDL function is impaired owing to changes in the abundance and function of HDL-associated lipids and proteins, resulting in reduced vascular protection. However, the gold standard density ultracentrifugation technique used in the isolation of HDL also co-isolates extracellular vesicles (EVs). EVs are ubiquitous cell-derived particles with lipid bilayers that carry a number of lipids, proteins and DNA/RNA/miRNAs involved in cell-to-cell communication. EVs transfer their bioactive load through interaction with cell surface receptors, membrane fusion and endocytic pathways, and have been implicated in both cardiovascular and metabolic diseases - both as protective and pathogenic mediators. Given that studies using density ultracentrifugation to isolate HDL also co-isolate EVs, biological effects attributed to HDL may be confounded by EVs. We hypothesise that some of HDLs vascular protective functions in cardiovascular and metabolic disease may be mediated by EVs. Elucidating the contribution of EVs to HDL functions will provide better understanding of vascular protection and function in conditions of insulin resistance and potentially provide novel therapeutic targets for such diseases.
|
|
| 6. |
- Bodin, Helena, 1964-, et al.
(författare)
-
Afterword. World literature in the making
- 2022
-
Ingår i: Literature and the Making of the World. - London : Bloomsbury Academic. - 9781501374159 - 9781501374173 - 9781501374166 - 9781501374180 ; , s. 307-311
-
Bokkapitel (refereegranskat)
|
|
| 7. |
- Hande, Liv Nesse, et al.
(författare)
-
Effect of N-3 Polyunsaturated Fatty Acids on Lipid Composition in Familial Hypercholesterolemia : A Randomized Crossover Trial
- 2022
-
Ingår i: Biomedicines. - : MDPI. - 2227-9059. ; 10:8
-
Tidskriftsartikel (refereegranskat)abstract
- Individuals with familial hypercholesterolemia (FH) have an increased risk of cardiovascular disease. Treatment is mainly low-density lipoprotein cholesterol (LDL-C) reduction. How omega-3 polyunsaturated fatty acids (n-3 PUFAs) supplements affect lipoproteins in FH subjects is unknown. We hypothesized that a high-dose n-3 PUFA supplement would reduce atherogenic lipoproteins and influence the high-density lipoprotein cholesterol (HDL-C) function. We performed a randomized, double-blinded crossover study with 34 genetically verified FH individuals (18-75 years, clinically stable, statin treatment > 12 months). Treatment was 4 g n-3 PUFAs (1840 mg eicosapentaenoic acid and 1520 mg docosahexaenoic acid daily) or four capsules of olive oil for three months in a crossover design with a washout period of three months. The defined outcomes were changes in triglycerides, lipoproteins, lipoprotein subfractions, apolipoproteins, and HDL-C function. After treatment with n-3 PUFAs, total cholesterol, LDL-C, and triglycerides were reduced compared to placebo (p <= 0.01 for all). Total HDL-C levels were unchanged, but the subfraction of large HDL-C was higher (p <= 0.0001) after n-3 PUFAs than after placebo, and intermediate HDL-C and small HDL-C were reduced after n-3 PUFAs compared to placebo (p = 0.02 and p <= 0.001, respectively). No changes were found in apolipoproteins and HDL-C function. N-3 PUFAs supplements reduced atherogenic lipoproteins in FH subjects, leaving HDL-C function unaffected.
|
|
| 8. |
- Jiang, Zheshun, et al.
(författare)
-
Hexavalent chromium still a concern in Sweden : Evidence from a cross-sectional study within the SafeChrom project
- 2024
-
Ingår i: International journal of hygiene and environmental health. - : Elsevier. - 1438-4639 .- 1618-131X. ; 256
-
Tidskriftsartikel (refereegranskat)abstract
- ObjectivesHexavalent chromium (Cr(VI)) is classified as a human carcinogen. Occupational Cr(VI) exposure can occur during different work processes, but the current exposure to Cr(VI) at Swedish workplaces is unknown.MethodsThis cross-sectional study (SafeChrom) recruited non-smoking men and women from 14 companies with potential Cr(VI) exposure (n = 113) and controls from 6 companies without Cr(VI) exposure (n = 72). Inhalable Cr(VI) was measured by personal air sampling (outside of respiratory protection) in exposed workers. Total Cr was measured in urine (pre- and post-shift, density-adjusted) and red blood cells (RBC) (reflecting Cr(VI)) in exposed workers and controls. The Bayesian tool Expostats was used to assess risk and evaluate occupational exposure limit (OEL) compliance.ResultsThe exposed workers performed processing of metal products, steel production, welding, plating, and various chemical processes. The geometric mean concentration of inhalable Cr(VI) in exposed workers was 0.15 μg/m3 (95% confidence interval: 0.11–0.21). Eight of the 113 exposed workers (7%) exceeded the Swedish OEL of 5 μg/m3, and the Bayesian analysis estimated the share of OEL exceedances up to 19.6% for stainless steel welders. Median post-shift urinary (0.60 μg/L, 5th-95th percentile 0.10–3.20) and RBC concentrations (0.73 μg/L, 0.51–2.33) of Cr were significantly higher in the exposed group compared with the controls (urinary 0.10 μg/L, 0.06–0.56 and RBC 0.53 μg/L, 0.42–0.72). Inhalable Cr(VI) correlated with urinary Cr (rS = 0.64) and RBC-Cr (rS = 0.53). Workers within steel production showed the highest concentrations of inhalable, urinary and RBC Cr. Workers with inferred non-acceptable local exhaustion ventilation showed significantly higher inhalable Cr(VI), urinary and RBC Cr concentrations compared with those with inferred acceptable ventilation. Furthermore, workers with inferred correct use of respiratory protection were exposed to significantly higher concentrations of Cr(VI) in air and had higher levels of Cr in urine and RBC than those assessed with incorrect or no use. Based on the Swedish job-exposure-matrix, approximately 17 900 workers were estimated to be occupationally exposed to Cr(VI) today.ConclusionsOur study demonstrates that some workers in Sweden are exposed to high levels of the non-threshold carcinogen Cr(VI). Employers and workers seem aware of Cr(VI) exposure, but more efficient exposure control strategies are required. National strategies aligned with the European strategies are needed in order to eliminate this cause of occupational cancer.
|
|
| 9. |
- Jiang, Zheshun, et al.
(författare)
-
P-205 THE SAFECHROM PROJECT - EVIDENCE FROM A CROSS-SECTIONAL STUDY SHOWS THAT HEXAVALENT CHROMIUM IS STILL A CONCERN IN SWEDEN
- 2024
-
Ingår i: Occupational Medicine. - 0962-7480. ; 74:Suppl 1, s. 291-292
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Hexavalent chromium Cr(VI) is a human carcinogen, but the current exposure to Cr(VI) at Swedish workplaces is unknown.Recruitment of 113 workers with potential Cr(VI) exposure and 72 controls was combined with measurements of inhalable Cr(VI) (only exposed workers) and total Cr in urine and red blood cells (RBC), Bayesian analysis of occupational exposure limit (OEL) compliance was used, as well as the Swedish job-exposure-matrix.Exposed workers performed processing of metal products, steel production, welding, and plating. The geometric mean concentration of inhalable Cr(VI) in exposed workers was 0.15 μg/m3. Eight workers (7\ exceeded the Swedish OEL (5 μg/m3), and the share of OEL exceedances was estimated to be up to 19.6\ and RBC-Cr were significantly higher in exposed workers compared with controls. Workers with inferred non-acceptable local exhaustion ventilation showed significantly higher inhalable Cr(VI), urine- and RBC-Cr than those with acceptable ventilation. Workers with inferred correct use of respiratory protection had higher inhalable Cr(VI), and, paradoxically, higher urine- and RBC-Cr concentrations than workers with incorrect use. We estimate that ~17 900 Swedish workers are occupationally exposed to Cr(VI) today.Our study showed that although most air measurements were relatively low, 7\ and particularly stainless steel workers are at risk for exceeding the OEL. The existing protective measures implemented at workplaces are still inadequate and insufficient.Some workers in Sweden are exposed to high levels of the non-threshold carcinogen Cr(VI). National strategies aligned with European strategies are needed to eliminate occupational cancer.
|
|
| 10. |
- Karlsson, Hanna L., et al.
(författare)
-
Health hazards of particles in additive manufacturing : a cross-disciplinary study on reactivity, toxicity and occupational exposure to two nickel-based alloys
- 2023
-
Ingår i: Scientific Reports. - : Springer Nature. - 2045-2322. ; 13:1
-
Tidskriftsartikel (refereegranskat)abstract
- The increasing use of additive manufacturing (AM) techniques (e.g., 3D-printing) offers many advantages but at the same time presents some challenges. One concern is the possible exposure and health risk related to metal containing particles of different sizes. Using the nickel-based alloys Hastelloy X (HX) and Inconel 939 (IN939) as a case, the aim of this cross-disciplinary study was to increase the understanding on possible health hazards and exposure. This was done by performing in-depth characterization of virgin, reused and condensate powders, testing in vitro toxicity (cytotoxicity, genotoxicity, oxidative stress), and measuring occupational airborne exposure. The results showed limited metal release from both HX and IN939, and slightly different surface composition of reused compared to virgin powders. No or small effects on the cultured lung cells were observed when tested up to 100 µg/mL. Particle background levels in the printing facilities were generally low, but high transient peaks were observed in relation to sieving. Furthermore, during post processing with grinding, high levels of nanoparticles (> 100,000 particles/cm3) were noted. Urine metal levels in AM operators did not exceed biomonitoring action limits. Future studies should focus on understanding the toxicity of the nanoparticles formed during printing and post-processing.
|
|
| 11. |
- Kilbo Edlund, Karl, et al.
(författare)
-
Long-term ambient air pollution and coronary atherosclerosis : results from the Swedish SCAPIS study
- 2024
-
Ingår i: Atherosclerosis. - : Elsevier. - 0021-9150 .- 1879-1484.
-
Tidskriftsartikel (refereegranskat)abstract
- Background and aims: Despite firm evidence for an association between long-term ambient air pollution exposure and cardiovascular morbidity and mortality, results from epidemiological studies on the association between air pollution exposure and atherosclerosis have not been consistent. We investigated associations between long-term low-level air pollution exposure and coronary atherosclerosis.Methods: We performed a cross-sectional analysis in the large Swedish CArdioPulmonary bioImaging Study (SCAPIS, n = 30 154), a random general population sample. Concentrations of total and locally emitted particulate matter <2.5 μm (PM2.5), <10 μm (PM10), and nitrogen oxides (NOx) at the residential address were modelled using high-resolution dispersion models. We estimated associations between air pollution exposures and segment involvement score (SIS), coronary artery calcification score (CACS), number of non-calcified plaques (NCP), and number of significant stenoses, using ordinal regression models extensively adjusted for potential confounders.Results: Median 10-year average PM2.5 exposure was 6.2 μg/m3 (range 3.5–13.4 μg/m3). 51 % of participants were women and 51 % were never-smokers. None of the assessed pollutants were associated with a higher SIS or CACS. Exposure to PM2.5 was associated with NCP (adjusted OR 1.34, 95 % CI 1.13, 1.58, per 2.05 μg/m3). Associations with significant stenoses were inconsistent.Conclusions: In this large, middle-aged general population sample with low exposure levels, air pollution was not associated with measures of total burden of coronary atherosclerosis. However, PM2.5 appeared to be associated with a higher prevalence of non-calcified plaques. The results suggest that increased risk of early-stage atherosclerosis or rupture, but not increased total atherosclerotic burden, may be a pathway for long-term air pollution effects on cardiovascular disease.
|
|
| 12. |
- Kilbo Edlund, Karl, et al.
(författare)
-
Long-term ambient air pollution and coronary atherosclerosis: Results from the Swedish SCAPIS study.
- 2024
-
Ingår i: Atherosclerosis. - 1879-1484.
-
Tidskriftsartikel (refereegranskat)abstract
- Despite firm evidence for an association between long-term ambient air pollution exposure and cardiovascular morbidity and mortality, results from epidemiological studies on the association between air pollution exposure and atherosclerosis have not been consistent. We investigated associations between long-term low-level air pollution exposure and coronary atherosclerosis.We performed a cross-sectional analysis in the large Swedish CArdioPulmonary bioImaging Study (SCAPIS, n=30154), a random general population sample. Concentrations of total and locally emitted particulate matter <2.5μm (PM2.5), <10μm (PM10), and nitrogen oxides (NOx) at the residential address were modelled using high-resolution dispersion models. We estimated associations between air pollution exposures and segment involvement score (SIS), coronary artery calcification score (CACS), number of non-calcified plaques (NCP), and number of significant stenoses, using ordinal regression models extensively adjusted for potential confounders.Median 10-year average PM2.5 exposure was 6.2μg/m3 (range 3.5-13.4μg/m3). 51% of participants were women and 51% were never-smokers. None of the assessed pollutants were associated with a higher SIS or CACS. Exposure to PM2.5 was associated with NCP (adjusted OR 1.34, 95% CI 1.13, 1.58, per 2.05μg/m3). Associations with significant stenoses were inconsistent.In this large, middle-aged general population sample with low exposure levels, air pollution was not associated with measures of total burden of coronary atherosclerosis. However, PM2.5 appeared to be associated with a higher prevalence of non-calcified plaques. The results suggest that increased risk of early-stage atherosclerosis or rupture, but not increased total atherosclerotic burden, may be a pathway for long-term air pollution effects on cardiovascular disease.
|
|
| 13. |
- Ljunggren, Sofia, et al.
(författare)
-
Decision-making under ambiguity after frontal lobe resection for epilepsy
- 2023
-
Ingår i: Epilepsy and Behavior. - 1525-5050 .- 1525-5069. ; 142
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: Decision-making is crucial to daily life and can impact our society as well as economic conditions. Although the frontal lobes have been identified as important for decision-making, this capacity has only been studied to a limited extent in frontal lobe epilepsy and not at all after frontal lobe resection (FLR) for epilepsy. This study aimed to explore decision-making under ambiguity after FLR for epilepsy. Methods: Fourteen patients having undergone FLR for epilepsy completed the Iowa Gambling Task (IGT) which is a widely used tool to measure decision-making under ambiguity. Iowa Gambling Task scores included in the analysis were: total net score, separate scores from five blocks across the test, and a change score (last block of IGT minus first block). A group of healthy controls (n = 30) was used as a comparison. Associations between IGT and standardized neuropsychological methods for assessment of executive functions, self-rating questionnaires of mental health, fatigue, and behavior linked to frontal lobe dysfunction were also investigated. Results: The patient group performed inferior to controls at the final block of the IGT (p =.001). A group difference in IGT change scores was found (p =.005), reflecting the absence of a positive change in performance over time for the FLR group compared to the control group. Correlations with tests of executive functions as well as self-rating scales were mainly statistically nonsignificant. Conclusions: This study shows that patients having undergone FLR for epilepsy have difficulties with decision-making under ambiguity. The performance illustrated a failure to learn throughout the task. Executive as well as emotional deficits may impact decision-making processes in this patient group and need to be considered in further studies. Prospective studies with larger cohorts are needed.
|
|
| 14. |
- Ljunggren, Sofia, et al.
(författare)
-
Experiences of emotional and psychosocial functioning after frontal lobe resection for epilepsy
- 2021
-
Ingår i: Epilepsy & Behavior. - : Elsevier BV. - 1525-5050 .- 1525-5069. ; 121
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: Frontal lobe resection (FLR) is the second most common epilepsy surgery procedure in adults. Few studies address neuropsychological consequences after FLR. The aim of this study was to explore patients' and relatives' experiences of cognitive, emotional and social cognitive functioning after frontal lobe epilepsy surgery. Methods: Semi-structured interviews were held with 14 patients having gone through FLR as adults during the years 2000-2016 and 12 of their relatives. Interviews were audio-recorded, transcribed and analyzed with inductive qualitative content analysis. Results: Positive as well as negative consequences were described both by patients and relatives. Feelings of relief and an increased capacity to experience emotions of well-being were mainly experienced as related to seizure freedom. A newfound autonomy and a more grown-up identity as opposed to a selfimage based on epilepsy was also highlighted. However, results also showed that even for seizure free patients, FLR could give rise to negative experiences, the most prominent of which were mental fatigue, lowered mood and social withdrawal. Coping strategies included planning ahead to avoid mental exhaustion. Over all, respondents considered that the epilepsy surgery had been a risk well worth taking and that positive consequences outweighed the negative ones. Conclusions: This study shows a range of positive as well as negative outcomes after FLR for epilepsy. The findings indicate that lowered mood and mental fatigue could affect the life situation in a negative way, regardless of seizure outcome. This is important to consider in the preoperative counselling of patients and their families, as well as in the postsurgical follow-up. It is also crucial that the epilepsy surgery team has the possibility to offer rehabilitation and support to families regarding these aspects after surgery. (c) 2021 The Author(s). Published by Elsevier Inc. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
|
|
| 15. |
- Ljunggren, Stefan, et al.
(författare)
-
Metal additive manufacturing and possible clinical markers for the monitoring of exposure-related health effects
- 2021
-
Ingår i: PLOS ONE. - : Public Library of Science. - 1932-6203. ; 16:3
-
Tidskriftsartikel (refereegranskat)abstract
- Additive manufacturing (AM) includes a series of techniques used to create products, in several different materials, such as metal, polymer or ceramics, with digital models. The main advantage of AM is that it allows the creation of complex structures, but AM promises several additional advantages including the possibility to manufacture on demand or replacing smaller worn parts by directly building on an existing piece. Therefore, the interest for and establishment of AM is rapidly expanding, which is positive, however it is important to be aware that new techniques may also result in new challenges regarding health and safety issues. Metals in blood and possible clinical effects due to metal exposure were investigated in AM operators at one of the first serial producing AM facilities in the world during two consecutive years with implementation of preventive measures in-between. As comparison, welders and office workers as control group were investigated. Health investigations comprised of surveys, lung function tests, antioxidant activity and vascular inflammation as well as renal- and hepatic function analysis. AM operators had significantly reduced nickel levels in blood (10.8 vs 6.2 nmol/L) as well as improved lung function (80 vs 92% of predicted) from year 1 to year 2. This is in line with previously published results displaying reduced exposure. Blood cobalt and nickel levels correlated with previously reported urinary levels, while blood chromium did not. Multivariate modelling showed that blood cobalt, antioxidant/inflammatory marker serum amyloid A1/serum paraoxonase/arylesterase 1 activity and the hepatic markers aspartate transaminase, alanine transaminase, and alkaline phosphatase were higher in AM operators compared to controls. The study show that the selected clinical analyses could function as a complement to metal analyses in biological fluids when investigating exposure-related health effects in AM operators. However, validation in larger cohorts is necessary before more definite conclusions could be drawn.
|
|
| 16. |
- Nosratabadi, Ali Reza, et al.
(författare)
-
Airway contraction and cytokine release in isolated rat lungs induced by wear particles from the road and tire interface and road vehicle brakes
- 2023
-
Ingår i: Inhalation Toxicology. - : Taylor & Francis. - 0895-8378 .- 1091-7691. ; 35:13-14, s. 309-323
-
Tidskriftsartikel (refereegranskat)abstract
- The dominant road traffic particle sources are wear particles from the road and tire interface, and from vehicle brake pads. The aim of this work was to investigate the effect of road and brake wear particles on pulmonary function and biomarkers in isolated perfused rat lungs. Particles were sampled from the studded tire wear of three road pavements containing different rock materials in a road simulator; and from the wear of two brake pad materials using a pin-on-disk machine. Isolated rat lungs inhaled the coarse and fine fractions of the sampled particles resulting in an estimated total particle lung dose of 50 μg. The tidal volume (TV) was measured during the particle exposure and the following 50 min. Perfusate and BALF were analyzed for the cytokines TNF, CXCL1 and CCL3. The TV of lungs exposed to rock materials was significantly reduced after 25 min of exposure compared to the controls, for quartzite already after 4 min. The particles of the heavy-duty brake pads had no effect on the TV. Brake particles resulted in a significant elevation of CXCL1 in the perfusate. Brake particles showed significant elevations of all three measured cytokines, and quartzite showed a significant elevation of TNF in BALF. The study shows that the toxic effect on lungs exposed to airborne particles can be investigated using measurements of tidal volume. Furthermore, the study shows that the choice of rock material in road pavements has the potential to affect the toxicity of road wear PM10.
|
|
| 17. |
- Olszowka, Maciej, et al.
(författare)
-
Excessive daytime sleepiness, morning tiredness, and prognostic biomarkers in patients with chronic coronary syndrome
- 2023
-
Ingår i: International Journal of Cardiology. - : Elsevier. - 0167-5273 .- 1874-1754.
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundSleep-related breathing disorders (SRBD) are related to cardiovascular outcomes in patients with chronic coronary syndrome (CCS). Whether SRBD-related symptoms are associated with prognostic biomarkers in patients with CCS is not established.MethodsAssociations between frequency (never/rarely, sometimes, often, always) of self-reported SRBD-related symptoms (excessive daytime sleepiness [EDS]; morning tiredness [MT]; loud snoring; multiple awakenings/night; gasping, choking, or apnea when asleep) and levels of biomarkers related to cardiovascular prognosis (high-sensitivity C-reactive protein [hs-CRP], interleukin 6 [IL-6], high-sensitivity cardiac troponin T [hs-cTnT], N-terminal pro B-type natriuretic peptide [NT-proBNP], cystatin C, growth differentiation factor 15 [GDF-15] and lipoprotein-associated phospholipase A2 activity) were assessed at baseline in 15,640 patients with CCS on optimal secondary preventive therapy in the STABILITY trial. Cross-sectional associations were assessed by adjusted linear regression models testing for trends with the never/rarely category serving as reference.ResultsEDS was associated (geometric mean ratio, 95% confidence interval) with increased levels of IL-6 (often 1.07 [1.03–1.10], always 1.15 [1.10–1.21]), GDF-15 (often 1.03 [1.01–1.06], always 1.07 [1.03–1.11]), NT-proBNP (always 1.22 [1.12–1.33]), and hs-cTnT (always 1.07 [1.01–1.12]). MT was associated with increased levels of IL-6 (often 1.05 [1.01–1.09], always 1.09 [1.04–1.15]), and GDF-15 (always 1.06 [1.03–1.10]). All symptoms were to some degree associated with higher levels of hs-CRP and loud snoring was also associated with decreased levels of NT-proBNP and hs-cTnT.ConclusionsIn patients with CCS, stepwise increased frequency of SRBD-related symptoms, such as EDS and MT, were associated with gradually higher levels of IL-6 and GDF-15, each reflecting distinct pathophysiological pathways.
|
|
| 18. |
- Patanapirunhakit, Patamat, et al.
(författare)
-
Sphingolipids in HDL - Potential markers for adaptation to pregnancy?
- 2021
-
Ingår i: Biochimica et Biophysica Acta - Molecular and Cell Biology of Lipids. - : Elsevier. - 1388-1981 .- 1879-2618. ; 1866:8
-
Forskningsöversikt (refereegranskat)abstract
- Plasma high density lipoprotein (HDL) exhibits many functions that render it an effective endothelial protective agent and may underlie its potential role in protecting the maternal vascular endothelium during pregnancy. In non-pregnant individuals, the HDL lipidome is altered in metabolic disease compared to healthy individuals and is linked to reduced cholesterol efflux, an effect that can be reversed by lifestyle management. Specific sphingolipids such as sphingosine-1-phosphate (S1P) have been shown to mediate the vaso-dilatory effects of plasma HDL via interaction with the endothelial nitric oxide synthase pathway. This review describes the relationship between plasma HDL and vascular function during healthy pregnancy and details how this is lost in preeclampsia, a disorder of pregnancy associated with widespread endothelial dysfunction. Evidence of a role for HDL sphingolipids, in particular S1P and ceramide, in cardiovascular disease and in healthy pregnancy and pre-eclampsia is discussed. Available data suggest that HDL-S1P and HDL-ceramide can mediate vascular protection in healthy pregnancy but not in preeclampsia. HDL sphingolipids thus are of potential importance in the healthy maternal adaptation to pregnancy.
|
|
| 19. |
- Zsigmond, Peter, 1966-, et al.
(författare)
-
Proteomic Analysis of the Cerebrospinal Fluid in Patients With Essential Tremor Before and After Deep Brain Stimulation Surgery: A Pilot Study
- 2020
-
Ingår i: Neuromodulation. - : WILEY. - 1094-7159 .- 1525-1403. ; 23:4, s. 502-508
-
Tidskriftsartikel (refereegranskat)abstract
- Objective Electrical neuromodulation by deep brain stimulation (DBS) is a well-established method for treatment of severe essential tremor (ET). The mechanism behind the tremor relieving effect remains largely unknown. Our aim of this study was to evaluate alterations in proteomics pre- and post-DBS in patients diagnosed with severe ET. Materials and Methods Ten right-handed ET patients were included in this study. Cerebrospinal fluid (CSF) was obtained by lumbar puncture preoperatively (N = 10) and six months postoperatively (N = 7). The samples were analyzed by high sensitive liquid chromatography tandem mass spectrometry. Results Twenty-two proteins were statistically significantly altered in the CSF of ET patients before and after DBS treatment. Downregulated proteins were involved in regulatory processes of protein activation, complement activation, humoral immune response as well as acute inflammatory response. The upregulated proteins were involved in pathways for cell secretion, adhesion as well as response to axon injury. Conclusions DBS in ET patients effects the neurochemical environment in the CSF. These findings further elucidate the mechanisms of DBS and may lead to new biomarkers for evaluating the effect of DBS treatment.
|
|
