| 1. |
- Kristan, Matej, et al.
(författare)
-
The first visual object tracking segmentation VOTS2023 challenge results
- 2023
-
Ingår i: 2023 IEEE/CVF International conference on computer vision workshops (ICCVW). - : Institute of Electrical and Electronics Engineers Inc.. - 9798350307443 - 9798350307450 ; , s. 1788-1810
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking Segmentation VOTS2023 challenge is the eleventh annual tracker benchmarking activity of the VOT initiative. This challenge is the first to merge short-term and long-term as well as single-target and multiple-target tracking with segmentation masks as the only target location specification. A new dataset was created; the ground truth has been withheld to prevent overfitting. New performance measures and evaluation protocols have been created along with a new toolkit and an evaluation server. Results of the presented 47 trackers indicate that modern tracking frameworks are well-suited to deal with convergence of short-term and long-term tracking and that multiple and single target tracking can be considered a single problem. A leaderboard, with participating trackers details, the source code, the datasets, and the evaluation kit are publicly available at the challenge website1
|
|
| 2. |
- Liang, Wang, et al.
(författare)
-
Life cycle assessment of blast furnace ironmaking processes : A comparison of fossil fuels and biomass hydrochar applications
- 2023
-
Ingår i: Fuel. - : Elsevier BV. - 0016-2361 .- 1873-7153. ; 345
-
Tidskriftsartikel (refereegranskat)abstract
- The impact of the iron and steel production process on the ecological environment cannot be ignored. This study aims to assess the impact of life cycle assessment on the traditional fossil fuel blast furnace ironmaking process and the biomass hydrochar blast furnace ironmaking process. The Simapro v9.0 software is used to comprehensively evaluate the life cycle impacts of biomass hydrochar in the blast furnace ironmaking process. The results show that the life cycle impact categories of the blast furnace ironmaking process mainly include global warming, non-renewable energy and respiratory inorganics. The global warming impact of the ironmaking process using hydrochar is 2054.00 kg CO2 eq, which is 420.61 kg CO2 eq less than that of traditional blast furnace ironmaking process. The global warming impact is mainly reflected in the emission of CO2 gas, and the main source is the generation of blast furnace gas and the use of sinter. The respiratory inorganics impact is mainly manifested in the emission of nitrogen oxides, sulfur oxides and particulates, which mainly comes from the mining of iron ore and the production of sinter. The non-renewable energy impact mainly comes from the coal resources, and the use of other renewable energy such as biomass energy is an important way to reduce the impact. Therefore, biomass hydrochar used in the metallurgical process is more suitable for sustainable devel-opment of the ecological environment.
|
|
| 3. |
- Wang, Guangwei, et al.
(författare)
-
Application of catalysts in biomass hydrothermal carbonization for the preparation of high-quality blast furnace injection fuel
- 2023
-
Ingår i: Energy. - : Elsevier BV. - 0360-5442 .- 1873-6785. ; 283
-
Tidskriftsartikel (refereegranskat)abstract
- The low energy density of biomass is a crucial limitation for their application in the steel industry. This study used catalyst-catalysed hydrothermal carbonization (HTC) to prepare higher-quality hydrochar from biomass. The effects of acid-base homogeneous catalysts (Fe(NO3)3·9H2O and CaO), liquid phase product (circulating water) and carbonization temperatures on the physicochemical properties and microscopic morphology of hydrochars were investigated. The results showed that higher carbonization temperature, circulating water and Fe(NO3)3·9H2O all raised the higher heating value (HHV) of hydrochar. When 4% of Fe(NO3)3·9H2O was added, the HHV of hydrochar reached 30.05 MJ/kg, which was 1.15 times higher than without catalysts. The above three conditions can also make the ordering degree in the carbonaceous structure lower ordered and enhance the reaction performance of the hydrochar. Meanwhile, the addition of Fe(NO3)3·9H2O at 240 °C can reduce the hydrochar ignition and burnout temperatures and enhance the combustion performance. Moreover, it was demonstrated that circulating water promoted the HTC more than deionized water. In conclusion, adding Fe(NO3)3·9H2O or circulating water to the HTC process can produce higher-quality hydrochar.
|
|
| 4. |
- Wang, Guangwei, et al.
(författare)
-
Hydrothermal carbonization mechanism of agricultural waste under different conditions : An experimental and ReaxFF molecular dynamics study
- 2023
-
Ingår i: Journal of the Energy Institute. - : Elsevier BV. - 1743-9671 .- 1746-0220. ; 110
-
Tidskriftsartikel (refereegranskat)abstract
- Different hydrothermal carbonization (HTC) conditions will affect the yield, physicochemical properties and application of agricultural waste hydrochar. The hydrochar prepared under different HTC conditions was systematically studied through various experimental methods, and the experimental results were further verified and explained by ReaxFF molecular dynamics method. The results show that the higher HTC temperature, higher liquid-solid ratio and longer reaction time can reduce the yield of solid product. The volatile content of rice straw (RS) hydrochar decreased with the progresses of HTC, but the fixed carbon content increased. The HTC process is accompanied by the breakage of C-H bonds, C-O bonds, C-C bonds and O-H bonds, with C-O bond breaks comprising the most. The HTC process is also accompanied by the C-C bonds regeneration, indicating that decomposition and polymerization reactions coexist in the HTC process. At higher HTC temperature and longer reaction time, RS hydrochar showed lower specific surface area and porosity. The effect of the HTC temperature is the largest, while the effect of holding time is the smallest. Therefore, to expand the potential use of RS hydrochar, it is important to thoroughly investigate the influence of HTC conditions on the physicochemical properties of RS.
|
|
| 5. |
- Wang, Guangwei, et al.
(författare)
-
Preparation of Biomass Hydrochar and Application Analysis of Blast Furnace Injection
- 2023
-
Ingår i: Energies. - : MDPI AG. - 1996-1073. ; 16:3
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrothermal carbonization (HTC) technology was used to carbonize and improve biomass raw material to obtain hydrochar. The effects of HTC temperature and holding time on the yield, composition, structure, combustion behavior, and safety of hydrochar were studied systematically. In addition, the results show that with the increase in HTC temperature and the prolongation of holding time, the yield of hydrochar gradually reduces, the fixed carbon content of hydrochar increases, the volatile content decreases, and a large number of ash and alkali metals enter the liquid phase and are removed. Further, the analysis of the combustion properties and the structure of hydrochar can be observed in that, as the HTC process promotes the occurrence of polymerization reactions, the specific surface area gradually reduces, the degree of carbon ordering increases, and the combustion curve moves toward the high-temperature zone and gradually approaches bituminous coal. Since biomass hydrochar has the characteristic of being carbon neutral, blast furnace injection hydrochar can reduce CO2 emissions, and every 1 kg/tHM of biomass hydrochar can reduce CO2 emissions by 1.95 kg/tHM.
|
|
| 6. |
- Wu, Jianlong, et al.
(författare)
-
Study on Direct Reduction in Carbon-Bearing Pellets Using Biochar
- 2023
-
Ingår i: Sustainability. - : MDPI AG. - 2071-1050. ; 15:24
-
Tidskriftsartikel (refereegranskat)abstract
- As a renewable, carbon-neutral raw material, the application of biomass in steel production is conducive to reducing greenhouse gas emissions and achieving green and sustainable development in the steel industry. The heating and reduction process of a rotary hearth furnace was simulated under laboratory conditions to roast and reduce biochar carbon-bearing pellets with coke powder and anthracite carbon-bearing pellets as a comparison. This was conducted to investigate the impact of biochar as a reducing agent on the direct reduction in carbon-bearing pellets. Under various reduction temperatures, carbon/oxygen ratios, and reduction times, tests were conducted on the compressive strength and metallization rate of carbon-bearing pellets made using typical binder bentonite. Results show that with the increase in reduction temperature, the metallization rate of pellets increases, while the compressive strength initially decreases and then increases, reaching the lowest point at 900 degrees C and 1000 degrees C. When the ratio of carbon to oxygen is between 0.7 and 0.9 and the reduction time is between 15 and 25 min, carbon-bearing pellets meet the requirements of both the metallization rate and the strength, with the metallization rate above 80%. However, severe volume swelling and low strength were observed in biochar carbon-bearing pellets at 900 degrees C and 1000 degrees C, which negatively impacted multi-layered charging and heat transfer efficiency in the blast furnace. Therefore, a novel laboratory-prepared binder was introduced in the preparation process of biochar carbon-bearing pellets at an appropriate addition ratio of 5-8%. Without producing any swelling concerns, the inclusion of this binder considerably improved the compression strength and metallization rate of the pellets, enabling them to fulfill the standards for raw materials in the blast furnace.
|
|
| 7. |
- Ye, Lian, et al.
(författare)
-
Feasibility analysis of plastic and biomass hydrochar for blast furnace injection
- 2023
-
Ingår i: Energy. - : Elsevier BV. - 0360-5442 .- 1873-6785. ; 263
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrothermal carbonization (HTC) technology upgrades combustible waste (CW) to high-quality fuel known as hydrochar. However, there is a research gap regarding the application limit of hydrochar instead of fossil fuels in blast furnaces. In this study, the physical, chemical, and metallurgical properties of hydrochar were thoroughly analyzed. The results showed that gross calorific value, grindability, ignition temperature, explosivity, combustion and gasification all improved by HTC process compared with the waste feedstocks. Moreover, the HTC process can effectively remove harmful elements (K, Na, Cl, and S) from feedstocks into liquid and gas phase without adding other reagents, reducing harmful effects in the blast furnace. Removal rates by HTC were >80% for alkali metals and >73.9% for Cl (reaching 98.18% for polyvinyl chloride hydrochar). The environmental benefit calculation shows that the CO2 emission reduction of replacing bituminous coal with 40% HTC-treated maize straw can reach 94.7 kg/tHM. The annual CO2 reduction can reach 1.7 x 107 kg and the annual coal reduction is 1.5 x 107 kg of a blast furnace. The results showed that hydrochar is a clean energy source compared with fossil fuel alternatives and meets the blast furnace injection requirements.
|
|
