| 2. |
- Paget, Christophe, 1971-
(författare)
-
Active Health Monitoring of Aerospace Composite Structures by Embedded Piezoceramic Transducers
- 2001
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The objectives of the thesis work were to study theinteraction between embedded piezoceramic transducers andcomposite structures as well as determine techniques tosimplify the Lamb waves analysis. Firstly, this studyconsidered the design of the embedded piezoceramic transducers.Secondly, the effect of the embedded transducer on thecomposite strength as well as the influence of the mechanicallyloaded composite on the characteristics of the embeddedtransducer were investigated. Finally, to simplify the analysisof such complex Lamb wave responses, two techniques weredeveloped. They were based on the wavelet technique and amodelling technique, respectively.The design of the embedded piezoceramic transducers wasimproved by reducing the stress concentrations in the compositeas well as in all components constituting the piezoceramictransducer, that is, the piezoceramic element, interconnectorand conductive adhesive. The numerical analysis showed that thethickness of the interconnector had no significant influence onthe stress state of the piezoceramic transducer. It was alsofound that a compliant conductive adhesive reduced the stressconcentration located at the edge of the piezoceramic element.The structural integrity of composites embedded with theimproved piezoceramic transducer was investigated. Theexperiments, performed in tensile and compressive staticloading, indicated that the strength of the composite was notsignificantly reduced by the embedded piezoceramic transducer.Further investigations were conducted to evaluate theperformance of the improved piezoceramic transducer used as aLamb wave generator embedded in composites subjected tomechanical loading. The tests were conducted in tensile andcompressive static loading as well as fatigue loading. Thestudy showed a large working range of the embedded piezoceramictransducer. A post processing technique based on the waveletswas further assessed in the detection of damage and in thedamage size evaluation. A new wavelet basis was developedspecially for processing the Lamb wave response. This method,focused on the wavelet coefficients from the decomposition Lambwave response, showed promising results in evaluating thedamage size. The wavelets offered a sensitive tool to detectsmall damage, compared to other detection methods, improvingthe damage detection capabilities. The other technique wasdevoted to the simplification of the generated Lamb waves bythe use of multi-element transducers. The transducers weredesigned using both a normal-mode expansion and a FE-method.This technique allowed reducing the effect of a Lamb wave modetowards another. This technique was successfully implemented ina damage detection system in composites.Keywords:Embedded piezoceramic, transducer, composite,structural integrity, health monitoring, damage detection, Lambwaves, wavelets, normal-mode expansion, FE-method
|
|
