| 1. |
- Franchi, Daniele, et al.
(författare)
-
Effect of the Ancillary Ligand on the Performance of Heteroleptic Cu(I) Diimine Complexes as Dyes in Dye-Sensitized Solar Cells
- 2022
-
Ingår i: ACS Applied Energy Materials. - : American Chemical Society (ACS). - 2574-0962. ; 5:2, s. 1460-1470
-
Tidskriftsartikel (refereegranskat)abstract
- A series of heteroleptic Cu(I) diimine complexes with different ancillary ligands and 6,6'-dimethyl-2,2'-bipyridine-4,4'-dibenzoic acid (dbda) as the anchoring ligand were selfassembled on TiO2 surfaces and used as dyes for dye-sensitized solar cells (DSSCs). The binding to the TiO2 surface was studied by hard X-ray photoelectron spectroscopy for a brominecontaining complex, confirming the complex formation. The performance of all complexes was assessed and rationalized on the basis of their respective ancillary ligand. The DSSC photocurrent-voltage characteristics, incident photon-to-current conversion efficiency (IPCE) spectra, and calculated lowest unoccupied molecular orbital (LUMO) distributions collectively show a push-pull structural dye design, in which the ancillary ligand exhibits an electron-donating effect that can lead to improved solar cell performance. By analyzing the optical properties of the dyes and their solar cell performance, we can conclude that the presence of ancillary ligands with bulky substituents protects the Cu(I) metal center from solvent coordination constituting a critical factor in the design of efficient Cu(I)-based dyes. Moreover, we have identified some components in the I-/I-3(-)-based electrolyte that causes dissociation of the ancillary ligand, i.e., TiO2 photoelectrode bleaching. Finally, the detailed studies on one of the dyes revealed an electrolyte-dye interaction, leading to a dramatic change of the dye properties when adsorbed on the TiO2 surface.
|
|
| 2. |
- Garcia Fernandez, Alberto, et al.
(författare)
-
Experimental and Theoretical Core Level and Valence Band Analysis of Clean Perovskite Single Crystal Surfaces
- 2022
-
Ingår i: Small. - : Wiley. - 1613-6810 .- 1613-6829. ; 18:13
-
Tidskriftsartikel (refereegranskat)abstract
- A detailed understanding of the surface and interface properties of lead halide perovskites is of interest for several applications, in which these materials may be used. To develop this understanding, the study of clean crystalline surfaces can be an important stepping stone. In this work, the surface properties and electronic structure of two different perovskite single crystal compositions (MAPbI(3) and Cs(x)FA(1-)(x)PbI(3)) are investigated using synchrotron-based soft X-ray photoelectron spectroscopy (PES), molecular dynamics simulations, and density functional theory. The use of synchrotron-based soft X-ray PES enables high surface sensitivity and nondestructive depth-profiling. Core level and valence band spectra of the single crystals are presented. The authors find two carbon 1s contributions at the surface of MAPbI(3) and assign these to MA(+) ions in an MAI-terminated surface and to MA(+) ions below the surface. It is estimated that the surface is predominantly MAI-terminated but up to 30% of the surface can be PbI2-terminated. The results presented here can serve as reference spectra for photoelectron spectroscopy investigations of technologically relevant polycrystalline thin films, and the findings can be utilized to further optimize the design of device interfaces.
|
|
| 3. |
- Kammlander, Birgit, et al.
(författare)
-
Thermal degradation of lead halide perovskite surfaces
- 2022
-
Ingår i: Chemical Communications. - : Royal Society of Chemistry. - 1359-7345 .- 1364-548X. ; 58:97, s. 13523-13526
-
Tidskriftsartikel (refereegranskat)abstract
- Commercial use of lead halide perovskites requires improved thermal stability and therefore a better understanding of their degradation mechanisms. The thermal degradation of three clean perovskite single crystal surfaces (MAPbI3, MAPbBr3, FAPbBr3) was investigated using synchrotron-based photoelectron spectroscopy. Central findings are that the halide has a large impact on thermal stability and that the degradation of formamidnium results in the formation of a new organic species at the FAPbBr3 crystal surface.
|
|
| 4. |
|
|
| 5. |
- Sloboda, Tamara, et al.
(författare)
-
Unravelling the ultrafast charge dynamics in PbS quantum dots through resonant Auger mapping of the sulfur K-edge
- 2022
-
Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 12:49, s. 31671-31679
-
Tidskriftsartikel (refereegranskat)abstract
- There is a great fundamental interest in charge dynamics of PbS quantum dots, as they are promising for application in photovoltaics and other optoelectronic devices. The ultrafast charge transport is intriguing, offering insight into the mechanism of electron tunneling processes within the material. In this study, we investigated the charge transfer times of PbS quantum dots of different sizes and non-quantized PbS reference materials by comparing the propensity of localized or delocalized decays of sulfur 1s core hole states excited by X-rays. We show that charge transfer times in PbS quantum dots decrease with excitation energy and are similar at high excitation energy for quantum dots and non-quantized PbS. However, at low excitation energies a distinct difference in charge transfer time is observed with the fastest charge transfer in non-quantized PbS and the slowest in the smallest quantum dots. Our observations can be explained by iodide ligands on the quantum dots creating a barrier for charge transfer, which reduces the probability of interparticle transfer at low excitation energies. The probability of intraparticle charge transfer is limited by the density of available states which we describe according to a wave function in a quantum well model. The stronger quantum confinement effect in smaller PbS quantum dots is manifested as longer charge transfer times relative to the larger quantum dots at low excitation energies.
|
|
| 6. |
- Sterling, Cody M., 1993-, et al.
(författare)
-
Electronic Structure and Chemical Bonding in Methylammonium Lead Triiodide and Its Precursor Methylammonium Iodide
- 2022
-
Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society. - 1932-7447 .- 1932-7455. ; 126:47, s. 20143-20154
-
Tidskriftsartikel (refereegranskat)abstract
- A detailed examination of the electronic structures of methylammonium lead triiodide (MAPI) and methylammonium iodide (MAI) is performed with ab initio molecular dynamics (AIMD) simulations based on density functional theory, and the theoretical results are compared to experimental probes. The occupied valence bands of a MAPI single crystal and MAI powder are probed with X-ray photoelectron spectroscopy, and the conduction bands are probed from the perspective of nitrogen K-edge X-ray absorption spectroscopy. Combined, the theoretical simulations and the two experimental techniques allow for a dissection of the electronic structure unveiling the nature of chemical bonding in MAPI and MAI. Here, we show that the difference in band gap between MAPI and MAI is caused chiefly by interactions between iodine and lead but also weaker interactions with the MA+counterions. Spatial decomposition of the iodine p levels allows for analysis of Pb-I σ bonds and πinteractions, which contribute to this effect with the involvement of the Pb 6p levels. Differences in hydrogen bonding between the two materials, seen in the AIMD simulations, are reflected in nitrogen valence orbital composition and in nitrogen K-edge X-ray absorption spectra.
|
|
| 7. |
- Svanström, Sebastian, et al.
(författare)
-
The Complex Degradation Mechanism of Copper Electrodes on Lead Halide Perovskites
- 2022
-
Ingår i: ACS Materials Science Au. - : American Chemical Society (ACS). - 2694-2461. ; 2:3, s. 301-312
-
Tidskriftsartikel (refereegranskat)abstract
- Lead halide perovskitesolar cells have reached power conversionefficiencies during the past few years that rival those of crystallinesilicon solar cells, and there is a concentrated effort to commercializethem. The use of gold electrodes, the current standard, is prohibitivelycostly for commercial application. Copper is a promising low-costelectrode material that has shown good stability in perovskite solarcells with selective contacts. Furthermore, it has the potential tobe self-passivating through the formation of CuI, a copper salt whichis also used as a hole selective material. Based on these opportunities,we investigated the interface reactions between lead halide perovskitesand copper in this work. Specifically, copper was deposited on theperovskite surface, and the reactions were followed in detail usingsynchrotron-based and in-house photoelectron spectroscopy. The resultsshow a rich interfacial chemistry with reactions starting upon depositionand, with the exposure to oxygen and moisture, progress over manyweeks, resulting in significant degradation of both the copper andthe perovskite. The degradation results not only in the formationof CuI, as expected, but also in the formation of two previously unreporteddegradation products. The hope is that a deeper understanding of theseprocesses will aid in the design of corrosion-resistant copper-basedelectrodes.
|
|
