1. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
2. |
|
|
3. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
4. |
-
- 2019
-
Tidskriftsartikel (refereegranskat)
|
|
5. |
|
|
6. |
|
|
7. |
|
|
8. |
- Cheng, Wan-Lin, et al.
(författare)
-
Quality of life and care burden among family caregivers of people with severe mental illness : mediating effects of self-esteem and psychological distress
- 2022
-
Ingår i: BMC Psychiatry. - : BioMed Central (BMC). - 1471-244X. ; 22:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background Family caregivers are important allies for healthcare providers in facilitating the recovery process among people with mental illness (PWMI). The present study examined the factors associated with quality of life (QoL) among family caregivers of PWMI. Methods A multi-center cross-sectional survey was conducted. Family caregivers of people with schizophrenia, major depressive disorder, and bipolar disorder were recruited using convenience sampling. A survey assessing their QoL, depression, anxiety, and self-esteem was completed with self-rated psychometric scales including the Rosenberg Self-Esteem Scale, Caregiver Burden Inventory, Taiwanese Depression Questionnaire, Beck Anxiety Inventory, and World Health Organization Quality of Life Instrument Short Form. A mediation model was constructed with QoL as the dependent variable, care burden as the independent variable, and psychological distress (including depression and anxiety) with self-esteem as mediating variables. Results Family caregivers of people with schizophrenia had worse QoL compared with counterparts of people with major depression and bipolar disorder. The sociodemographic of both caregivers and PWMI had less impact on QoL when psychological factors were considered. Caregivers with lower self-esteem, higher levels of psychological distress, and heavier care burdens had poorer QoL. Care burden had a significant total effect on QoL. Both self-esteem and psychological distress were significant mediators. Conclusion The findings indicated that caregivers' psychological health and care burden influenced their QoL. Interventions that target family caregivers' self-esteem and psychological distress may attenuate the effect from care burden, and further improve their QoL.
|
|
9. |
- Danaei, Goodarz, et al.
(författare)
-
Effects of diabetes definition on global surveillance of diabetes prevalence and diagnosis: a pooled analysis of 96 population-based studies with 331288 participants
- 2015
-
Ingår i: The Lancet Diabetes & Endocrinology. - 2213-8595 .- 2213-8587. ; 3:8, s. 624-637
-
Tidskriftsartikel (refereegranskat)abstract
- Background Diabetes has been defined on the basis of different biomarkers, including fasting plasma glucose (FPG), 2-h plasma glucose in an oral glucose tolerance test (2hOGTT), and HbA(1c). We assessed the effect of different diagnostic definitions on both the population prevalence of diabetes and the classification of previously undiagnosed individuals as having diabetes versus not having diabetes in a pooled analysis of data from population-based health examination surveys in different regions. Methods We used data from 96 population-based health examination surveys that had measured at least two of the biomarkers used for defining diabetes. Diabetes was defined using HbA(1c) (HbA(1c) >= 6 . 5% or history of diabetes diagnosis or using insulin or oral hypoglycaemic drugs) compared with either FPG only or FPG-or-2hOGTT definitions (FPG >= 7 . 0 mmol/L or 2hOGTT >= 11 . 1 mmol/L or history of diabetes or using insulin or oral hypoglycaemic drugs). We calculated diabetes prevalence, taking into account complex survey design and survey sample weights. We compared the prevalences of diabetes using different definitions graphically and by regression analyses. We calculated sensitivity and specificity of diabetes diagnosis based on HbA1c compared with diagnosis based on glucose among previously undiagnosed individuals (ie, excluding those with history of diabetes or using insulin or oral hypoglycaemic drugs). We calculated sensitivity and specificity in each survey, and then pooled results using a random-effects model. We assessed the sources of heterogeneity of sensitivity by meta-regressions for study characteristics selected a priori. Findings Population prevalence of diabetes based on FPG- or-2hOGTT was correlated with prevalence based on FPG alone (r= 0 . 98), but was higher by 2-6 percentage points at different prevalence levels. Prevalence based on HbA(1c) was lower than prevalence based on FPG in 42 . 8% of age-sex-survey groups and higher in another 41 . 6%; in the other 15 . 6%, the two definitions provided similar prevalence estimates. The variation across studies in the relation between glucose-based and HbA(1c)-based prevalences was partly related to participants' age, followed by natural logarithm of per person gross domestic product, the year of survey, mean BMI, and whether the survey population was national, subnational, or from specific communities. Diabetes defined as HbA(1c) 6 . 5% or more had a pooled sensitivity of 52 . 8% (95% CI 51 . 3-54 . 3%) and a pooled specificity of 99 . 74% (99 . 71-99 . 78%) compared with FPG 7 . 0 mmol/L or more for diagnosing previously undiagnosed participants; sensitivity compared with diabetes defined based on FPG-or-2hOGTT was 30 . 5% (28 . 7-32 . 3%). None of the preselected study-level characteristics explained the heterogeneity in the sensitivity of HbA(1c) versus FPG. Interpretation Different biomarkers and definitions for diabetes can provide different estimates of population prevalence of diabetes, and differentially identify people without previous diagnosis as having diabetes. Using an HbA(1c)-based definition alone in health surveys will not identify a substantial proportion of previously undiagnosed people who would be considered as having diabetes using a glucose-based test.
|
|
10. |
- Kristan, Matej, et al.
(författare)
-
The first visual object tracking segmentation VOTS2023 challenge results
- 2023
-
Ingår i: 2023 IEEE/CVF International conference on computer vision workshops (ICCVW). - : Institute of Electrical and Electronics Engineers Inc.. - 9798350307443 - 9798350307450 ; , s. 1788-1810
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking Segmentation VOTS2023 challenge is the eleventh annual tracker benchmarking activity of the VOT initiative. This challenge is the first to merge short-term and long-term as well as single-target and multiple-target tracking with segmentation masks as the only target location specification. A new dataset was created; the ground truth has been withheld to prevent overfitting. New performance measures and evaluation protocols have been created along with a new toolkit and an evaluation server. Results of the presented 47 trackers indicate that modern tracking frameworks are well-suited to deal with convergence of short-term and long-term tracking and that multiple and single target tracking can be considered a single problem. A leaderboard, with participating trackers details, the source code, the datasets, and the evaluation kit are publicly available at the challenge website1
|
|
11. |
- Zhou, Bin, et al.
(författare)
-
Worldwide trends in diabetes since 1980: A pooled analysis of 751 population-based studies with 4.4 million participants
- 2016
-
Ingår i: The Lancet. - : Elsevier B.V.. - 0140-6736 .- 1474-547X. ; 387:10027, s. 1513-1530
-
Tidskriftsartikel (refereegranskat)abstract
- Background: One of the global targets for non-communicable diseases is to halt, by 2025, the rise in the age standardised adult prevalence of diabetes at its 2010 levels. We aimed to estimate worldwide trends in diabetes, how likely it is for countries to achieve the global target, and how changes in prevalence, together with population growth and ageing, are aff ecting the number of adults with diabetes.Methods: We pooled data from population-based studies that had collected data on diabetes through measurement of its biomarkers. We used a Bayesian hierarchical model to estimate trends in diabetes prevalence-defined as fasting plasma glucose of 7.0 mmol/L or higher, or history of diagnosis with diabetes, or use of insulin or oral hypoglycaemic drugs-in 200 countries and territories in 21 regions, by sex and from 1980 to 2014. We also calculated the posterior probability of meeting the global diabetes target if post-2000 trends continue.Findings: We used data from 751 studies including 4372000 adults from 146 of the 200 countries we make estimates for. Global age-standardised diabetes prevalence increased from 4.3% (95% credible interval 2.4-17.0) in 1980 to 9.0% (7.2-11.1) in 2014 in men, and from 5.0% (2.9-7.9) to 7.9% (6.4-9.7) in women. The number of adults with diabetes in the world increased from 108 million in 1980 to 422 million in 2014 (28.5% due to the rise in prevalence, 39.7% due to population growth and ageing, and 31.8% due to interaction of these two factors). Age-standardised adult diabetes prevalence in 2014 was lowest in northwestern Europe, and highest in Polynesia and Micronesia, at nearly 25%, followed by Melanesia and the Middle East and north Africa. Between 1980 and 2014 there was little change in age-standardised diabetes prevalence in adult women in continental western Europe, although crude prevalence rose because of ageing of the population. By contrast, age-standardised adult prevalence rose by 15 percentage points in men and women in Polynesia and Micronesia. In 2014, American Samoa had the highest national prevalence of diabetes (>30% in both sexes), with age-standardised adult prevalence also higher than 25% in some other islands in Polynesia and Micronesia. If post-2000 trends continue, the probability of meeting the global target of halting the rise in the prevalence of diabetes by 2025 at the 2010 level worldwide is lower than 1% for men and is 1% for women. Only nine countries for men and 29 countries for women, mostly in western Europe, have a 50% or higher probability of meeting the global target.Interpretation: Since 1980, age-standardised diabetes prevalence in adults has increased, or at best remained unchanged, in every country. Together with population growth and ageing, this rise has led to a near quadrupling of the number of adults with diabetes worldwide. The burden of diabetes, both in terms of prevalence and number of adults aff ected, has increased faster in low-income and middle-income countries than in high-income countries.
|
|
12. |
- Bentham, James, et al.
(författare)
-
A century of trends in adult human height
- 2016
-
Ingår i: eLIFE. - 2050-084X. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- Being taller is associated with enhanced longevity, and higher education and earnings. We reanalysed 1472 population-based studies, with measurement of height on more than 18.6 million participants to estimate mean height for people born between 1896 and 1996 in 200 countries. The largest gain in adult height over the past century has occurred in South Korean women and Iranian men, who became 20.2 cm (95% credible interval 17.522.7) and 16.5 cm (13.319.7) taller, respectively. In contrast, there was little change in adult height in some sub-Saharan African countries and in South Asia over the century of analysis. The tallest people over these 100 years are men born in the Netherlands in the last quarter of 20th century, whose average heights surpassed 182.5 cm, and the shortest were women born in Guatemala in 1896 (140.3 cm; 135.8144.8). The height differential between the tallest and shortest populations was 19-20 cm a century ago, and has remained the same for women and increased for men a century later despite substantial changes in the ranking of countries.
|
|
13. |
- Bentham, James, et al.
(författare)
-
A century of trends in adult human height
- 2016
-
Ingår i: eLIFE. - : eLife Sciences Publications Ltd. - 2050-084X. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- Being taller is associated with enhanced longevity, and higher education and earnings. We reanalysed 1472 population-based studies, with measurement of height on more than 18.6 million participants to estimate mean height for people born between 1896 and 1996 in 200 countries. The largest gain in adult height over the past century has occurred in South Korean women and Iranian men, who became 20.2 cm (95% credible interval 17.5–22.7) and 16.5 cm (13.3– 19.7) taller, respectively. In contrast, there was little change in adult height in some sub-Saharan African countries and in South Asia over the century of analysis. The tallest people over these 100 years are men born in the Netherlands in the last quarter of 20th century, whose average heights surpassed 182.5 cm, and the shortest were women born in Guatemala in 1896 (140.3 cm; 135.8– 144.8). The height differential between the tallest and shortest populations was 19-20 cm a century ago, and has remained the same for women and increased for men a century later despite substantial changes in the ranking of countries.
|
|
14. |
- Cho, Yoon Shin, et al.
(författare)
-
Meta-analysis of genome-wide association studies identifies eight new loci for type 2 diabetes in east Asians.
- 2012
-
Ingår i: Nature Genetics. - : Springer Science and Business Media LLC. - 1061-4036 .- 1546-1718. ; 44:1
-
Tidskriftsartikel (refereegranskat)abstract
- We conducted a three-stage genetic study to identify susceptibility loci for type 2 diabetes (T2D) in east Asian populations. We followed our stage 1 meta-analysis of eight T2D genome-wide association studies (6,952 cases with T2D and 11,865 controls) with a stage 2 in silico replication analysis (5,843 cases and 4,574 controls) and a stage 3 de novo replication analysis (12,284 cases and 13,172 controls). The combined analysis identified eight new T2D loci reaching genome-wide significance, which mapped in or near GLIS3, PEPD, FITM2-R3HDML-HNF4A, KCNK16, MAEA, GCC1-PAX4, PSMD6 and ZFAND3. GLIS3, which is involved in pancreatic beta cell development and insulin gene expression, is known for its association with fasting glucose levels. The evidence of an association with T2D for PEPD and HNF4A has been shown in previous studies. KCNK16 may regulate glucose-dependent insulin secretion in the pancreas. These findings, derived from an east Asian population, provide new perspectives on the etiology of T2D.
|
|
15. |
|
|
16. |
- Lei, Ying, et al.
(författare)
-
Microwave synthesis and enhancement of thermoelectric figure of merit in half-Heusler TiNiSbxSn1-x
- 2017
-
Ingår i: Ceramics International. - : Elsevier Ltd. - 0272-8842 .- 1873-3956. ; 43:12, s. 9343-9347
-
Tidskriftsartikel (refereegranskat)abstract
- The preparation of half-Heusler thermoelectric bulk is complex and time-consuming. In the present work, Sb doped TiNiSbxSn1-x bulks (x=0.01, 0.02, 0.03 and 0.04) were prepared via cold press forming, microwave synthesis and sintering in vacuumed sealed quartz in a few minutes. The microstructures of samples were characterized by using X-ray diffractometer (XRD) and scanning electron microscopy (SEM) techniques. The thermoelectric properties i.e. Seebeck coefficient (S), electrical resistivity (ρ) and thermal conductivity (κ) were measured on Seebeck coefficient/resistance analysis system (S/RAs) and laser flash thermal analyzer (LFT). The results show that high purity single phase was obtained after microwave sintering. The point defects came from Sb doping and the in-suit nanostructures attributed to microwave sintering process were found to lead to special microstructure. The variation trends of S, ρ, κ with temperature were analyzed. The influences of Sb doping to electrical and thermal properties were discussed. The electrical resistivity was decreased by ~84% at the cost of decreasing the Seebeck coefficient by ~25-30%. The maximum power factor of 2560 μWm-1K-2 was achieved at 673K. The lattice and total thermal conductivities are merely 1.1-1.3 and 3.8-4.0 Wm-1K-1 respectively. The thermoelectric figure of merit for TiNiSb0.03Sn0.97 was enhanced from 0.30 (773K) to 0.44 (673K and 723K) when compared to that of non-doped TiNiSn. © 2017 Elsevier Ltd and Techna Group S.r.l.
|
|
17. |
- Lei, Ying, et al.
(författare)
-
Microwave synthesis, microstructure, and thermoelectric properties of Zr substituted ZrxTi1-xNiSn half-Heusler bulks
- 2017
-
Ingår i: Materials letters (General ed.). - : ELSEVIER SCIENCE BV. - 0167-577X .- 1873-4979. ; 201, s. 189-193
-
Tidskriftsartikel (refereegranskat)abstract
- The half-Fleusler thermoelectric bulks ZrxTi1-xNiSn (x = 0.1, 0.2, 0.3, 0.4) were rapidly prepared by microwave heating. The phase composition and microstructure were characterized by X-ray diffractometer (XRD) and scanning electron microscopy (SEM). The electrical and thermal properties were measured by Seebeck coefficient/resistance analysis system (S/RAs) and laser flash thermal analyzer (LFT). The point defects came from Zr-substitution and the in-situ nanostructure attributed to microwave sintering were found to lead to special microstructure and excellent thermal performance. The grain size of Zr0.3Ti0.7NiSn is similar to 10 mu m. The in-situ nanoscale pores and inclusions are about 300-500 nm. The highest ZT 0.60 for Zr0.3Ti0.7NiSn was achieved at 673 K.
|
|
18. |
- Luo, Yifei, et al.
(författare)
-
Technology Roadmap for Flexible Sensors
- 2023
-
Ingår i: ACS Nano. - : American Chemical Society. - 1936-0851 .- 1936-086X. ; 17:6, s. 5211-5295
-
Forskningsöversikt (refereegranskat)abstract
- Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.
|
|
19. |
- Argirion, Ilona, et al.
(författare)
-
Comparative Analysis of the Humoral Immune Response to the EBV Proteome across EBV-Related Malignancies
- 2023
-
Ingår i: Cancer Epidemiology, Biomarkers and Prevention. - : American Association For Cancer Research (AACR). - 1055-9965 .- 1538-7755. ; 32:5, s. 687-696
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Epstein-Barr virus (EBV) is linked to multiple cancers, including classical Hodgkin lymphoma (cHL), endemic Burkitt lymphoma (eBL), nasopharyngeal carcinoma (NPC), and extranodal natural killer/T-cell lymphoma (NKTCL).Methods: Anti-EBV IgG and IgA antibody responses target-ing 202 sequences from 86 EBV proteins were measured using the same EBV whole proteome array across four case-control studies investigating EBV-positive cHL, eBL, NPC, and NKTCL (407 cases/620 controls). We grouped EBV-targeted antibodies into pathways by immunoglobulin type (IgA and IgG) and life-cycle stage (latent, immediate early lytic, early lytic, late lytic, and glycoprotein) and evaluated their associ-ation with each cancer type. In an additional analysis, we focused on the subset of 46 individual antibodies repre-senting the top candidates for each cancer and compared their associations across the four cancer types using multivariable linear regression models.Results: IgA antibody responses targeting all EBV life-cycle stages were associated with NPC but limited to anti-early lytic stage for cHL. NPC and eBL were associated with IgG antibodies across the viral life cycle; cHL with antibodies in the early lytic, late lytic and glyco-protein stages; and NKTCL with antibodies in the latent, immediate early lytic and early lytic phases. EBNA3A, BBLF1, BDLF4, and BLRF2 IgG antibodies were associated with all cancer types.Conclusions: Our observed similarities and differences across four EBV-associated cancers may inform EBV-related oncogenesis.Impact: Understanding the comparative humoral immune response across EBV-related cancers may aid in identifying shared etiologic roles of EBV proteins and inform unique pathogenic processes for each cancer.
|
|
20. |
- Cheng, Minglun, et al.
(författare)
-
Photocatalytic H-2 production using a hybrid assembly of an [FeFe]-hydrogenase model and CdSe quantum dot linked through a thiolato-functionalized cyclodextrin
- 2017
-
Ingår i: Faraday discussions. - : Royal Society of Chemistry. - 1359-6640 .- 1364-5498. ; 198, s. 197-209
-
Tidskriftsartikel (refereegranskat)abstract
- It is a great challenge to develop iron-based highly-efficient and durable catalytic systems for the hydrogen evolution reaction (HER) by understanding and learning from [FeFe]-hydrogenases. Here we report photocatalytic H-2 production by a hybrid assembly of a sulfonate-functionalized [FeFe]-hydrogenase mimic (1) and CdSe quantum dot (QD), which is denoted as 1/beta-CD-6-S-CdSe (beta-CD-6-SH = 6-mercapto-beta-cyclodextrin). In this assembly, thiolato-functionalized beta-CD acts not only as a stabilizing reagent of CdSe QDs but also as a host compound for the diiron catalyst, so as to confine CdSe QDs to the space near the site of diiron catalyst. In addition, another two reference systems comprising MAA-CdSe QDs (HMAA = mercaptoacetic acid) and 1 in the presence and absence of beta-CD, denoted as 1/beta-CD/MAA-CdSe and 1/MAA-CdSe, were studied for photocatalytic H-2 evolution. The influences of beta-CD and the stabilizing reagent beta-CD-6-S- on the stability of diiron catalyst, the fluorescence lifetime of CdSe QDs, the apparent electron transfer rate, and the photocatalytic H-2-evolving efficiency were explored by comparative studies of the three hybrid systems. The 1/beta-CD-6-SCdSe system displayed a faster apparent rate for electron transfer from CdSe QDs to the diiron catalyst compared to that observed for MAA-CdSe-based systems. The total TON for visible-light driven H-2 evolution by the 1/beta-CD-6-S-CdSe QDs in water at pH 4.5 is about 2370, corresponding to a TOF of 150 h(-1) in the initial 10 h of illumination, which is 2.7- and 6.6-fold more than the amount of H-2 produced from the reference systems 1/beta-CD/MAA-CdSe and 1/MAA-CdSe. Additionally, 1/beta-CD-6-S-CdSe gave 2.4-5.1 fold enhancement in the apparent quantum yield and significantly improved the stability of the system for photocatalytic H-2 evolution.
|
|
21. |
|
|
22. |
- Cheng, Yi Ting Daphne, et al.
(författare)
-
A Pilot Randomized Controlled Trial Among People Recovering from Mental Illness : A Tailored Mindfulness-Based Intervention versus Relaxation Training
- 2024
-
Ingår i: Journal of Evidence-Based Social Work. - 2640-8066 .- 2640-8074. ; 21:3, s. 318-348
-
Tidskriftsartikel (refereegranskat)abstract
- Background: This study assessed the potential effectiveness, acceptability and feasibility of a tailored mindfulness-based intervention (MBI, REMIND 2.0) for personal recovery among people with mental illness during the COVID-19 pandemic. Methods: In this pilot mixed methods randomized controlled trial, participants were assigned to either the MBI (n = 14) or the relaxation training (RT) (n = 14). Quantitative measures were used to assess primary outcomes, including personal recovery, mindfulness, self-compassion, resilience, and secondary outcomes, including depression, stress, anxiety, positive and negative moods, quality of life and general health at baseline (T0), post-intervention (T1) and one-month follow-up (T2). Quantitative interviews were conducted to explore the experiences and perceptions toward the MBI. Results: Results indicated significant group and time interactions for all outcomes except anxiety and stress. MBI participants showed significant improvements in all outcomes at T1, which were maintained at T2, except for positive mood. RT participants showed a significant decline in resilience but significant improvements in all secondary outcomes at T1, but all outcomes significantly declined at T2, except for anxiety and stress. MBI participants were receptive toward the programme in all aspects of personal recovery. Conclusions: The tailored MBI is a potentially effective, feasible and acceptable approach to facilitate personal recovery among people with mental illness. Differences between MBI and RT are discussed.
|
|
23. |
- Cheng, Yi Ting Daphne, et al.
(författare)
-
Validation of a Chinese Short Version of the Kentucky Inventory of Mindfulness Skills (KIMS-17) Among People Recovering from Mental Illness
- 2023
-
Ingår i: Mindfulness. - : Springer Nature. - 1868-8527 .- 1868-8535. ; 14:9, s. 2250-2264
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives: The current study was conducted to translate and validate the short version of the Kentucky Inventory of Mindfulness Skills (KIMS-Short) for the Chinese mental health population to examine the association between mindfulness and personal recovery.Method: A sample of 434 community mental health service users completed the Chinese KIMS-Short and measures of self-compassion, psychological distress, and personal recovery.Results: Results from the first- and second-order confirmatory factor analyses confirmed the five-factor structure proposed by previous research. Validity and internal consistency reliability of the 17-item Chinese KIMS-Short (KIMS-17) were evident. As measured by KIMS-17, mindfulness had moderate to strong correlations with self-compassion, stress, depression, anxiety, and personal recovery measures. Participants with experience in contemplation scored significantly higher overall and in all domains of mindfulness and personal recovery measures than those without experience. Additionally, participants who regularly engaged in contemplative practices scored significantly higher overall and in all domains of mindfulness and personal recovery measures, except for the describing mindfulness skill, compared to those who did not engage in practices.Conclusions: The KIMS-17 is an appropriate brief and multidimensional mindfulness measure for people with mental illness, regardless of their level of experience in contemplative practice. Engaging in contemplative practices, whether rarely or frequently, may contribute to improvement in mindfulness and facilitate personal recovery.
|
|
24. |
|
|
25. |
- Fang, Cheng, et al.
(författare)
-
An Autoclavable and Transparent Thermal Cutter for Reliably Sealing Wet Nanofibrous Membranes
- 2024
-
Ingår i: Nano Letters. - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 24:28, s. 8709-8716
-
Tidskriftsartikel (refereegranskat)abstract
- Sealing wet porous membranes is a major challenge when fabricating cell encapsulation devices. Herein, we report the development of an Autoclavable Transparent Thermal Cutter (ATTC) for reliably sealing wet nanofibrous membranes. Notably, the ATTC is autoclavable and transparent, thus enabling in situ visualization of the sealing process in a sterile environment and ensuring an appropriate seal. In addition, the ATTC could generate smooth, arbitrary-shaped sealing ends with excellent mechanical properties when sealing PA6, PVDF, and TPU nanofibrous tubes and PP microporous membranes. Importantly, the ATTC could reliably seal wet nanofibrous tubes, which can shoulder a burst pressure up to 313.2 +/- 19.3 kPa without bursting at the sealing ends. Furthermore, the ATTC sealing process is highly compatible with the fabrication of cell encapsulation devices, as verified by viability, proliferation, cell escape, and cell function tests. We believe that the ATTC could be used to reliably seal cell encapsulation devices with minimal side effects.
|
|
26. |
- Forouzanfar, Mohammad H, et al.
(författare)
-
Global, regional, and national comparative risk assessment of 79 behavioural, environmental and occupational, and metabolic risks or clusters of risks in 188 countries, 1990-2013 : a systematic analysis for the Global Burden of Disease Study 2013.
- 2015
-
Ingår i: The Lancet. - 0140-6736 .- 1474-547X. ; 386:10010, s. 2287-2323
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: The Global Burden of Disease, Injuries, and Risk Factor study 2013 (GBD 2013) is the first of a series of annual updates of the GBD. Risk factor quantification, particularly of modifiable risk factors, can help to identify emerging threats to population health and opportunities for prevention. The GBD 2013 provides a timely opportunity to update the comparative risk assessment with new data for exposure, relative risks, and evidence on the appropriate counterfactual risk distribution.METHODS: Attributable deaths, years of life lost, years lived with disability, and disability-adjusted life-years (DALYs) have been estimated for 79 risks or clusters of risks using the GBD 2010 methods. Risk-outcome pairs meeting explicit evidence criteria were assessed for 188 countries for the period 1990-2013 by age and sex using three inputs: risk exposure, relative risks, and the theoretical minimum risk exposure level (TMREL). Risks are organised into a hierarchy with blocks of behavioural, environmental and occupational, and metabolic risks at the first level of the hierarchy. The next level in the hierarchy includes nine clusters of related risks and two individual risks, with more detail provided at levels 3 and 4 of the hierarchy. Compared with GBD 2010, six new risk factors have been added: handwashing practices, occupational exposure to trichloroethylene, childhood wasting, childhood stunting, unsafe sex, and low glomerular filtration rate. For most risks, data for exposure were synthesised with a Bayesian meta-regression method, DisMod-MR 2.0, or spatial-temporal Gaussian process regression. Relative risks were based on meta-regressions of published cohort and intervention studies. Attributable burden for clusters of risks and all risks combined took into account evidence on the mediation of some risks such as high body-mass index (BMI) through other risks such as high systolic blood pressure and high cholesterol.FINDINGS: All risks combined account for 57·2% (95% uncertainty interval [UI] 55·8-58·5) of deaths and 41·6% (40·1-43·0) of DALYs. Risks quantified account for 87·9% (86·5-89·3) of cardiovascular disease DALYs, ranging to a low of 0% for neonatal disorders and neglected tropical diseases and malaria. In terms of global DALYs in 2013, six risks or clusters of risks each caused more than 5% of DALYs: dietary risks accounting for 11·3 million deaths and 241·4 million DALYs, high systolic blood pressure for 10·4 million deaths and 208·1 million DALYs, child and maternal malnutrition for 1·7 million deaths and 176·9 million DALYs, tobacco smoke for 6·1 million deaths and 143·5 million DALYs, air pollution for 5·5 million deaths and 141·5 million DALYs, and high BMI for 4·4 million deaths and 134·0 million DALYs. Risk factor patterns vary across regions and countries and with time. In sub-Saharan Africa, the leading risk factors are child and maternal malnutrition, unsafe sex, and unsafe water, sanitation, and handwashing. In women, in nearly all countries in the Americas, north Africa, and the Middle East, and in many other high-income countries, high BMI is the leading risk factor, with high systolic blood pressure as the leading risk in most of Central and Eastern Europe and south and east Asia. For men, high systolic blood pressure or tobacco use are the leading risks in nearly all high-income countries, in north Africa and the Middle East, Europe, and Asia. For men and women, unsafe sex is the leading risk in a corridor from Kenya to South Africa.INTERPRETATION: Behavioural, environmental and occupational, and metabolic risks can explain half of global mortality and more than one-third of global DALYs providing many opportunities for prevention. Of the larger risks, the attributable burden of high BMI has increased in the past 23 years. In view of the prominence of behavioural risk factors, behavioural and social science research on interventions for these risks should be strengthened. Many prevention and primary care policy options are available now to act on key risks.FUNDING: Bill & Melinda Gates Foundation.
|
|
27. |
- Korinek, Michal, et al.
(författare)
-
Anti-allergic Hydroxy Fatty Acids from Typhonium blumei Explored through ChemGPS-NP
- 2017
-
Ingår i: Frontiers in Pharmacology. - : FRONTIERS MEDIA SA. - 1663-9812. ; 8
-
Tidskriftsartikel (refereegranskat)abstract
- Increasing prevalence of allergic diseases with an inadequate variety of treatment drives forward search for new alternative drugs. Fatty acids, abundant in nature, are regarded as important bioactive compounds and powerful nutrients playing an important role in lipid homeostasis and inflammation. Phytochemical study on Typhonium blumei Nicolson and Sivadasan (Araceae), a folk anti-cancer and anti-inflammatory medicine, yielded four oxygenated fatty acids, 12R-hydroxyoctadec-9Z, 13E-dienoic acid methyl ester (1) and 10R-hydroxyoctadec-8E, 12Z-dienoic acid methyl ester (2), 9R-hydroxy-10E-octadecenoic acid methyl ester (3), and 12R *-hydroxy-10E-octadecenoic acid methyl ester (4). Isolated compounds were identified by spectroscopic methods along with GC-MS analysis. Isolated fatty acids together with a series of saturated, unsaturated and oxygenated fatty acids were evaluated for their anti-inflammatory and anti-allergic activities in vitro. Unsaturated (including docosahexaenoic and eicosapentaenoic acids) as well as hydroxylated unsaturated fatty acids exerted strong anti-inflammatory activity in superoxide anion generation (IC50 2.14-3.73 mu M) and elastase release (IC50 1.26-4.57 mu M) assays. On the other hand, in the anti-allergic assays, the unsaturated fatty acids were inactive, while hydroxylated fatty acids showed promising inhibitory activity in A23187-and antigen-induced degranulation assays (e.g., 9S-hydroxy-10E, 12Z-octadecadienoic acid, IC50 92.4 and 49.7 mu M, respectively). According to our results, the presence of a hydroxy group in the long chain did not influence the potent anti-inflammatory activity of free unsaturated acids. Nevertheless, hydroxylation of fatty acids (or their methyl esters) seems to be a key factor for the anti-allergic activity observed in the current study. Moreover, ChemGPS-NP was explored to predict the structure-activity relationship of fatty acids. The anti-allergic fatty acids formed different cluster distant from clinically used drugs. The bioactivity of T. blumei, which is historically utilized in folk medicine, might be related to the content of fatty acids and their metabolites.
|
|
28. |
|
|
29. |
- Li, Cheng-Wang, et al.
(författare)
-
Comparison of mechanical properties of various joining processes of aluminum-titanium light alloy
- 2023
-
Ingår i: Suxing Gongcheng Xuebao/Journal of Plasticity Engineering. - : Beijing Res. Inst. of Mechanical and Elec. Technology. - 1007-2012. ; 30:8, s. 138-145
-
Tidskriftsartikel (refereegranskat)abstract
- 5A06 aluminum alloy and TA1 titanium alloy were selected for the connection tests of flow drill screw, ultrasonic clinch and ultrasonic self-piercing riveting. The influence of plate overlap methods on mechanical properties of each group of joints was studied by static tensile tests. The results show that the mechanical properties of the flow drill screw joints and the ultrasonic self-piercing riveted joints are significantly improved when the soft plate is on top during the riveting process. The plate overlap method has little effect on the ultrasonic clinch joint. Flow drill screw joints have the best cushioning and shock absorption performance, but the stability is poor, and it is more limited when applied to body structures. Ultrasonic clinch joints have low cost and simple process, but poor shear resistance and are not suitable for body structures subjected to high stress. Compared with the other two connection methods, the ultrasonic self-piercing riveted connection has the best stability, the best tensile resistance and shear stiffness, and is suitable for much of the structure in lightweight field of automobile body. © 2023 Beijing Res. Inst. of Mechanical and Elec. Technology. All rights reserved.
|
|
30. |
- Li, P. F., et al.
(författare)
-
Dynamics of low energy electrons transmitting throughstraight glass capillary: Tilt angle dependence br
- 2022
-
Ingår i: Acta Physica Sinica. - : Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences. - 1000-3290. ; 71:8
-
Tidskriftsartikel (refereegranskat)abstract
- It is a hot topic that using glass capillary to focus and shape the charged particle beam, for it isinexpensive and simple. There are the cases that single glass capillaries are used to make the microbeam of thepositive ions. When it comes to electrons, their transmitting through insulating capillaries is complex and theattempt to use the glass capillary to produce electron beams in the size of micrometer needs further exploring.In this paper, the charging-up process of the 900-eV electrons transmitting through a glass capillary withthe grounded conductive-coated outer surface is reported. Two-dimensional angular distributions of thetransmitted electrons and their time evolutions are measured for the cases of various tilt angles of glass tube. Itis found that there are a considerable number of transmitted electrons at the tilt angle exceeding thegeometrical opening angle (1 degrees) of the glass tube. The intensity of transmitted electrons for large tilt angle (i.e. -1.15 degrees)can be considered as first falling to zero, then keeping zero for a long time, finally rising to a certain stablevalue. Correspondingly, the angular distribution center experiences moving towards negative-positive-negative-settled. The energy losses are measured for various tilt angles. The larger the tilt angles, the larger the energyloss of transmitted electrons is. To better understand the physics behind the observed phenomena, thesimulations of the energy loss for transmitted electrons at various tilt angles are performed by the Monte Carlomethod. The comparation between the simulated energy losses and the measured energy losses shows that theexperimental results are well explained by multiple deflections from the wall.
|
|
31. |
- Li, P. F., et al.
(författare)
-
Stable transmission of low energy electrons in glass tube with outer surface grounded conductively shielding
- 2022
-
Ingår i: Acta Physica Sinica. - : Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences. - 1000-3290. ; 71:7
-
Tidskriftsartikel (refereegranskat)abstract
- The electron microbeam is useful for modifying certain fragments of biomolecule. It is successful to applythe guiding effect to making the microbeam of positively charged particles by using single glass capillary.However, the mechanism for the electron transport through insulating capillaries is unclear. Meanwhile,previous researches show that there are oscillations of the transmission intensity of electrons with time in theglass capillaries with outer serface having no grounded conductive shielding, So, the application of glasscapillary to making the microbeam of electrons is limited. In this paper, the transmission of 1.5 and 0.9 keV electrons through the glass capillary without/with thegrounded conductive-coated outer surface are investigated, respectively. This study aims to understand themechanism for low energy electron transport in the glass capillaries, and find the conditions for the steadytransport of the electrons. Two-dimensional angular distribution of the transported electrons and its timeevolution are measured. It is found that the intensity of the transported electrons with the incident energythrough the glass capillaries for the glass capillaries without and with the grounded conductive-coated outersurface show the typical geometrical transmission characteristics. The time evolution of the 1.5- keV electrontransport presents an extremely complex variation for the glass capillary without the grounded conductive-coated outer surface. The intensity first falls, then rises and finally oscillates around a certain mean value.Correspondingly, the angular distribution center experiences moving towards positive-negative-settlement. Incomparison, the charge-up process of the 0.9 keV electron transport through the glass capillary with thegrounded conductive-coated outer surface shows a relatively simple behavior. At first, the intensity declines rapidly with time. Then, it slowly rises till a certain value and stays steady subsequently. The angulardistribution of transported electrons follows the intensity distribution in general, but with some delay. It quicklymoves to negative direction then comes back to positive direction. Finally, it regresses extremely slowly andends up around the tilt angle. To better understand the physics behind the observed phenomena, the simulationfor the interaction of the electrons with SiO2 material is performed to obtain the possible deposited chargedistribution by the CASINO code. Based on the analysis of the experimental results and the simulated chargedeposition, the conditions for stabilizing the electron transport through glass capillary arepresented.
|
|
32. |
- Li, Zheng, et al.
(författare)
-
Inkjet Printed Disposable High-Rate On-Paper Microsupercapacitors
- 2022
-
Ingår i: Advanced Functional Materials. - : Wiley. - 1616-301X .- 1616-3028. ; 32:1, s. 2108773-
-
Tidskriftsartikel (refereegranskat)abstract
- On-paper microsupercapacitors (MSCs) are a key energy storage component for disposable electronics that are anticipated to essentially address the increasing global concern of electronic waste. However, nearly none of the present on-paper MSCs combine eco-friendliness with high electrochemical performance (especially the rate capacity). In this work, highly reliable conductive inks based on the ternary composite of poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS), graphene quantum dots and graphene are developed for scalable inkjet printing of compact (footprint area ≈ 20 mm2) disposable MSCs on commercial paper substrates. Without any post treatment, the printed patterns attain a sheet resistance as low as 4 Ω ▫−1. The metal-free all-solid-state MSCs exhibit a maximum areal capacitance > 2 mF cm−2 at a high scan rate of 1000 mV s−1, long cycle life (>95% capacitance retention after 10 000 cycles), excellent flexibility, and long service time. Remarkably, the “totally metal-free” MSC arrays are fully inkjet printed on paper substrates and also exhibit high rate performance. The life cycle assessment indicates that these printed devices have much lower eco-toxicity and global warming potential than other on-paper MSCs.
|
|
33. |
- Lu, R, et al.
(författare)
-
Physalin A Inhibits MAPK and NF-κB Signal Transduction Through Integrin αVβ3 and Exerts Chondroprotective Effect
- 2021
-
Ingår i: Frontiers in pharmacology. - : Frontiers Media SA. - 1663-9812. ; 12, s. 761922-
-
Tidskriftsartikel (refereegranskat)abstract
- Osteoarthritis (OA) is a common articular ailment presented with cartilage loss and destruction that is common observed in the elderly population. Physalin A (PA), a natural bioactive withanolide, exerts anti-inflammatory residences in more than a few diseases; however, little is known about its efficacy for OA treatment. Here, we explored the therapeutic effects and potential mechanism of PA in mouse OA. After the in vitro administration of PA, the expression of inflammation indicators including inducible nitric oxide synthase and cyclooxygenase-2 was low, indicating that PA could alleviate the IL-1β-induced chondrocyte inflammation response. Moreover, PA reduced IL-1β-induced destruction of the extracellular matrix by upregulating the gene expression of anabolism factors, including collagen II, aggrecan, and sry-box transcription factor 9, and downregulating the gene expression of catabolic factors, including thrombospondin motif 5 and matrix metalloproteinases. In addition, the chondroprotective effect of PA was credited to the inhibition of mitogen-activated protein kinase (MAPK) and nuclear factor-κB (NF-κB) signaling pathways. Furthermore, in vivo experiments showed that intra-articular injection of PA could alleviate cartilage destruction in a mouse OA model. However, the anti-inflammatory, anabolism enhancing, catabolism inhibiting, and MAPK and NF-κB signaling pathway inhibiting properties of PA on IL-1β-induced chondrocytes could be reversed when integrin αVβ3 is knocked down by siRNA. In conclusion, our work demonstrates that PA exhibits a chondroprotective effect that may be mediated by integrin αVβ3. Thus, PA or integrin αVβ3 might be a promising agent or molecular target for the treatment of OA.
|
|
34. |
- Nan, Beiya, et al.
(författare)
-
Microstructure and Properties of Porous SiC Ceramics Modified by CVI-SiC Nanowires
- 2019
-
Ingår i: Advanced Engineering Materials. - : Wiley. - 1438-1656 .- 1527-2648. ; 21:5
-
Tidskriftsartikel (refereegranskat)abstract
- Sintered porous SiC ceramics are modified with SiC nanowires prepared via chemical vapor infiltration (CVI). SiC nanowires are successfully grown within sintered porous SiC ceramics following vapor-liquid-solid growth. The diameter of the SiC nanowires is in the range of 200 nm-1 mu m, and first decreases with increasing input gas ratio (alpha = 50, 60, 70, and 80) and increases thereafter. The diameter of the nanowires decreases from the surface to the interior areas of the porous SiC ceramics. SiC nanowires effectively improve the mechanical properties of the porous SiC ceramics, and sample Ni-50 has the highest flexural strength of 33.91 MPa and fracture toughness of 0.79 MPa center dot m(1/2), which increases by 90.4% and 49.1% compared to an unmodified sample, respectively. Additionally, the presence of SiC nanowires leads to porous SiC ceramics with altered porosity and microstructure, and higher thermal conductivity. The porous SiC ceramics modified by CVI SiC nanowires satisfy the requirements of gas filtration applications and the pressure drop increases with decreasing apparent porosity. The porous SiC ceramics modified with CVI SiC nanowire has higher permeability than those resulting from the introduction of CVI-SiC matrix or CVD-SiC coating into porous SiC ceramics.
|
|
35. |
- Qian, Li-Bing, et al.
(författare)
-
Transmission of electrons through the conical glass capillary with the grounded conducting outer surface
- 2017
-
Ingår i: Wuli xuebao. - : Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences. - 1000-3290. ; 66:12
-
Tidskriftsartikel (refereegranskat)abstract
- The transmission of 1.5 keV-electrons through a conical glass capillary is reported. This study aims to understand the so-called guiding effect for the negatively charged particles (e.g. electrons). The guiding mechanism is understood quite well with positively charged particles in particular highly charged ions, but not clear with electrons, i. e., even the basic scheme mediated by the existence of negative charge patches to guide the electrons is still somewhat controversial.. The study of the charging-up dynamics causing the electrons transport inside the capillary will shed light on this issue. In order to perform this, a data acquisition system has been setup to follow the time evolution of the two-dimensional angular distribution of the transmitted electrons. The electrons are detected by the multi-channel plate (MCP) detector with a phosphor screen. The image from the phosphor screen is recorded by a charge-coupled device camera. The timing signals for the detected events are extracted from the back stack of the MCP detector and recorded by the data acquisition system, synchronized with the acquired images. The electron beam has a size of 0.5 mm x 0.5 mm and a divergence of less than 0.35.. The inner diameter of the straight part of the capillary is 1.2 mm and the exit diameter is 225 mu m. A small conducting aperture of 0.3 mm in diameter is placed at the entrance of the capillary. Two-dimensional angular distribution of the transmitted electrons through conical glass capillary and its time evolution are measured. The results show that the transmission rate decreases and reaches to a constant value for the completely discharged glass capillary with time going by. The centroid of the angular distribution moves to an asymptotic value while the width remains unchanged. These transmission characteristics are different from those indicated in our previous work (2016 Acta Phys: Si n: 65 204103). The difference originates from the different manipulations of the capillary outer surface. A conducting layer is coated on the outer surface of the capillary and grounded in this work. This isolates various discharge/charge channels and forms a new stable discharge channel. The transmission rate as a function of the tilt angle shows that the allowed transmission occurs at the tilt angle limited by the geometrical factors, i. e., the geometrical opening angle given by the aspect ratio as well as the beam divergence. The transmission characteristics suggest that most likely there are formed no negative patches to facilitate the electron transmission through the glass capillary at this selected beam energy. It is different from that of highly charged ions, where the formation of the charge patches prohibits the close collisions between the following ions and guides them out of the capillary.
|
|
36. |
- Qiu, Chun-Yu, et al.
(författare)
-
Revealing the concentration of hydrogen peroxide in fuel cell catalyst layers by an in-operando approach
- 2022
-
Ingår i: Chinese Journal of Catalysis. - 1872-2067. ; 43:7, s. 1918-1926
-
Tidskriftsartikel (refereegranskat)abstract
- To evaluate the H2O2-tolerance of non-Pt oxygen reduction reaction (ORR) catalysts as well as investigate the H2O2-induced decay mechanism, the selection of an appropriate H2O2 concentration is a prerequisite. However, the concentration criterion is still unclear because of the lack of in-operando methods to determine the actual concentration of H2O2 in fuel cell catalyst layers. In this work, an electrochemical probe method was successfully established to in-operando monitor the H2O2 in non-Pt catalyst layers for the first time. The local concentration of H2O2 was revealed to reach 17 mmol/L, which is one order of magnitude higher than that under aqueous electrodes test conditions. Powered by the new knowledge, a concentration criterion of at least 17 mmol/L is suggested. This work fills in the large gap between aqueous electrode tests and the real fuel cell working conditions, and highlights the importance of in-operando monitoring methods.
|
|
37. |
- Razavi-Shearer, Devin M., et al.
(författare)
-
Adjusted estimate of the prevalence of hepatitis delta virus in 25 countries and territories
- 2024
-
Ingår i: JOURNAL OF HEPATOLOGY. - 0168-8278 .- 1600-0641. ; 80:2, s. 232-242
-
Tidskriftsartikel (refereegranskat)abstract
- Background & Aims: Hepatitis delta virus (HDV) is a satellite RNA virus that requires the hepatitis B virus (HBV) for assembly and propagation. Individuals infected with HDV progress to advanced liver disease faster than HBV-monoinfected individuals. Recent studies have estimated the global prevalence of anti-HDV antibodies among the HBV-infected population to be 5-15%. This study aimed to better understand HDV prevalence at the population level in 25 countries/territories. Methods: We conducted a literature review to determine the prevalence of anti-HDV and HDV RNA in hepatitis B surface antigen (HBsAg)-positive individuals in 25 countries/territories. Virtual meetings were held with experts from each setting to discuss the findings and collect unpublished data. Data were weighted for patient segments and regional heterogeneity to estimate the prevalence in the HBV-infected population. The findings were then combined with The Polaris Observatory HBV data to estimate the anti-HDV and HDV RNA prevalence in each country/territory at the population level. Results: After adjusting for geographical distribution, disease stage and special populations, the anti-HDV prevalence among the HBsAg+ population changed from the literature estimate in 19 countries. The highest anti-HDV prevalence was 60.1% in Mongolia. Once adjusted for the size of the HBsAg+ population and HDV RNA positivity rate, China had the highest absolute number of HDV RNA+ cases. Conclusions: We found substantially lower HDV prevalence than previously reported, as prior meta-analyses primarily focused on studies conducted in groups/regions that have a higher probability of HBV infection: tertiary care centers, specific risk groups or geographical regions. There is large uncertainty in HDV prevalence estimates. The implementation of reflex testing would improve estimates, while also allowing earlier linkage to care for HDV RNA+ individuals. The logistical and economic burden of reflex testing on the health system would be limited, as only HBsAg+ cases would be screened.
|
|
38. |
- Smati, S., et al.
(författare)
-
Integrative study of diet-induced mouse models of NAFLD identifies PPARα as a sexually dimorphic drug target
- 2022
-
Ingår i: Gut. - : BMJ Publishing Group. - 0017-5749 .- 1468-3288. ; 71:4, s. 807-821
-
Tidskriftsartikel (refereegranskat)abstract
- We evaluated the influence of sex on the pathophysiology of non-alcoholic fatty liver disease (NAFLD). We investigated diet-induced phenotypic responses to define sex-specific regulation between healthy liver and NAFLD to identify influential pathways in different preclinical murine models and their relevance in humans. Different models of diet-induced NAFLD (high-fat diet, choline-deficient high-fat diet, Western diet or Western diet supplemented with fructose and glucose in drinking water) were compared with a control diet in male and female mice. We performed metabolic phenotyping, including plasma biochemistry and liver histology, untargeted large-scale approaches (liver metabolome, lipidome and transcriptome), gene expression profiling and network analysis to identify sex-specific pathways in the mouse liver. The different diets induced sex-specific responses that illustrated an increased susceptibility to NAFLD in male mice. The most severe lipid accumulation and inflammation/fibrosis occurred in males receiving the high-fat diet and Western diet, respectively. Sex-biased hepatic gene signatures were identified for these different dietary challenges. The peroxisome proliferator-activated receptor α (PPARα) co-expression network was identified as sexually dimorphic, and in vivo experiments in mice demonstrated that hepatocyte PPARα determines a sex-specific response to fasting and treatment with pemafibrate, a selective PPARα agonist. Liver molecular signatures in humans also provided evidence of sexually dimorphic gene expression profiles and the sex-specific co-expression network for PPARα. These findings underscore the sex specificity of NAFLD pathophysiology in preclinical studies and identify PPARα as a pivotal, sexually dimorphic, pharmacological target. NCT02390232.
|
|
39. |
- Vos, Theo, et al.
(författare)
-
Global, regional, and national incidence, prevalence, and years lived with disability for 301 acute and chronic diseases and injuries in 188 countries, 1990-2013: a systematic analysis for the Global Burden of Disease Study 2013
- 2015
-
Ingår i: The Lancet. - 1474-547X .- 0140-6736. ; 386:9995, s. 743-800
-
Tidskriftsartikel (refereegranskat)abstract
- Background Up-to-date evidence about levels and trends in disease and injury incidence, prevalence, and years lived with disability (YLDs) is an essential input into global, regional, and national health policies. In the Global Burden of Disease Study 2013 (GBD 2013), we estimated these quantities for acute and chronic diseases and injuries for 188 countries between 1990 and 2013. Methods Estimates were calculated for disease and injury incidence, prevalence, and YLDs using GBD 2010 methods with some important refinements. Results for incidence of acute disorders and prevalence of chronic disorders are new additions to the analysis. Key improvements include expansion to the cause and sequelae list, updated systematic reviews, use of detailed injury codes, improvements to the Bayesian meta-regression method (DisMod-MR), and use of severity splits for various causes. An index of data representativeness, showing data availability, was calculated for each cause and impairment during three periods globally and at the country level for 2013. In total, 35 620 distinct sources of data were used and documented to calculated estimates for 301 diseases and injuries and 2337 sequelae. The comorbidity simulation provides estimates for the number of sequelae, concurrently, by individuals by country, year, age, and sex. Disability weights were updated with the addition of new population-based survey data from four countries. Findings Disease and injury were highly prevalent; only a small fraction of individuals had no sequelae. Comorbidity rose substantially with age and in absolute terms from 1990 to 2013. Incidence of acute sequelae were predominantly infectious diseases and short-term injuries, with over 2 billion cases of upper respiratory infections and diarrhoeal disease episodes in 2013, with the notable exception of tooth pain due to permanent caries with more than 200 million incident cases in 2013. Conversely, leading chronic sequelae were largely attributable to non-communicable diseases, with prevalence estimates for asymptomatic permanent caries and tension-type headache of 2.4 billion and 1.6 billion, respectively. The distribution of the number of sequelae in populations varied widely across regions, with an expected relation between age and disease prevalence. YLDs for both sexes increased from 537.6 million in 1990 to 764.8 million in 2013 due to population growth and ageing, whereas the age-standardised rate decreased little from 114.87 per 1000 people to 110.31 per 1000 people between 1990 and 2013. Leading causes of YLDs included low back pain and major depressive disorder among the top ten causes of YLDs in every country. YLD rates per person, by major cause groups, indicated the main drivers of increases were due to musculoskeletal, mental, and substance use disorders, neurological disorders, and chronic respiratory diseases; however HIV/AIDS was a notable driver of increasing YLDs in sub-Saharan Africa. Also, the proportion of disability-adjusted life years due to YLDs increased globally from 21.1% in 1990 to 31.2% in 2013. Interpretation Ageing of the world's population is leading to a substantial increase in the numbers of individuals with sequelae of diseases and injuries. Rates of YLDs are declining much more slowly than mortality rates. The non-fatal dimensions of disease and injury will require more and more attention from health systems. The transition to non-fatal outcomes as the dominant source of burden of disease is occurring rapidly outside of sub-Saharan Africa. Our results can guide future health initiatives through examination of epidemiological trends and a better understanding of variation across countries.
|
|
40. |
- Wan, Benting, et al.
(författare)
-
An integrated group decision-making method for the evaluation of hypertension follow-up systems using interval-valued q-rung orthopair fuzzy sets
- 2023
-
Ingår i: Complex & Intelligent Systems. - : Springer Science and Business Media LLC. - 2199-4536 .- 2198-6053. ; 9:4, s. 4521-4554
-
Tidskriftsartikel (refereegranskat)abstract
- It is imperative to comprehensively evaluate the function, cost, performance and other indices when purchasing a hypertension follow-up (HFU) system for community hospitals. To select the best software product from multiple alternatives, in this paper, we develop a novel integrated group decision-making (GDM) method for the quality evaluation of the system under the interval-valued q-rung orthopair fuzzy sets (IVq-ROFSs). The design of our evaluation indices is based on the characteristics of the HFU system, which in turn represents the evaluation requirements of typical software applications and reflects the particularity of the system. A similarity is extended to measure the IVq-ROFNs, and a new score function is devised for distinguishing IVq-ROFNs to figure out the best IVq-ROFN. The weighted fairly aggregation (WFA) operator is then extended to the interval-valued q-rung orthopair WFA weighted average operator (IVq-ROFWFAWA) for aggregating information. The attribute weights are derived using the LINMAP model based on the similarity of IVq-ROFNs. We design a new expert weight deriving strategy, which makes each alternative have its own expert weight, and use the ARAS method to select the best alternative based on these weights. With these actions, a GDM algorithm that integrates the similarity, score function, IVq-ROFWFAWA operator, attribute weights, expert weights and ARAS is proposed. The applicability of the proposed method is demonstrated through a case study. Its effectiveness and feasibility are verified by comparing it to other state-of-the-art methods and operators.
|
|
41. |
- Wan, Cheng-Liang, et al.
(författare)
-
Dynamics of slow electrons transmitting through straight glass capillary and tapered glass capillary
- 2016
-
Ingår i: Wuli xuebao. - : Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences. - 1000-3290. ; 65:20
-
Tidskriftsartikel (refereegranskat)abstract
- It has been found that the transmission rate of the electrons through insulating capillaries as a function of time/incident charge is not the same as that of the ions. The question arises that by using the electrons, if the negative charge patches can be formed to facilitate the transmission of the following electrons, thereby substantiating that the so-called guiding effect works also for electrons. This study aims to observe the time evolutions of the transmission of electrons through a straight glass tube and a tapered glass capillary. This will reveal the details of how and (or) if the negative charge patches can be formed when the electrons transport through them. In this work, a set of MCP/phosphor two-dimensional detection system based on Labview platform is developed to obtain the time evolution of the angular distribution of the transmitted electrons. The pulsed electron beams are obtained to test our detection system. The time evolution of the angular profile of 1.5 keV electrons transmitting through the glass tube/capillary is observed. The transmitted electrons are observed on the detector for a very short time and disappear for a time and then appear again for both the glass tube and tapered glass capillary, leading to an oscillation. The positive charge patches are formed in the insulating glass tube and tapered glass capillary since the secondary electron emission coefficient for the incident energy is larger than 1. It is due to the fact that fast discharge of the deposited charge leads to the increase of the transmission rate, while the fast blocking of the incident electrons due to the deposited positive charge leads to the decrease of the transmission rate. The geometrical configuration of the taper glass capillary tends to make the secondary electrons deposited at the exit part to form the negative patches that facilitate the transmission of electrons. This suggests that if the stable transmission needs to be reached for producing the electron micro-beam by using tapered glass capillaries, the steps must be taken to have the proper grounding and shielding of the glass capillaries and tubes. Our results show a difference in transmission through the insulating capillary between electrons and highly charged ions.
|
|
42. |
- Wan, Cheng-Liang, et al.
(författare)
-
基于玻璃毛细管的大气环境MeV质子微束的产生与测量 : [Production and measurement of MeV proton microbeams in atmospheric environment based on glass capillary]
- 2024
-
Ingår i: Wuli xuebao. - 1000-3290. ; 73:10
-
Tidskriftsartikel (refereegranskat)abstract
- 本文采用玻璃毛细管产生了大气环境中工作的2.5 MeV质子外束微束, 并对束斑直径及能量分布随玻璃毛细管与束流方向之间角度(倾角)变化进行测量. 测量结果表明, 在玻璃毛细管轴向与束流方向一致时(倾角为0°), 产生的微束中存在保持初始入射能量的直接穿透部分以及散射部分, 其中直接穿透的质子占比最大, 束斑直径也最大. 随着玻璃毛细管倾角的增大, 当其大于几何张角时, 束斑直径变小, 产生的微束全部为能量减小的散射部分, 直接穿透质子消失. 我们对质子在玻璃毛细管内传输时的内壁散射过程进行了模拟计算及离子轨迹分析, 发现大角度的散射部分决定了形成的外束微束斑外围轮廓, 而束斑中心区域由不与毛细管内壁产生任何作用的直接穿透离子构成, 其大小由玻璃毛细管出口直径以及几何容许张角决定. 采用玻璃毛细管产生的外束微束具有产生简单廉价, 微束区域定位简单的特点, 有望在辐射生物学、医学、材料等领域得到广泛应用.
|
|
43. |
- Wan, Liyang, et al.
(författare)
-
Molecular Degradation of Iron Phthalocyanine during the Oxygen Reduction Reaction in Acidic Media
- 2022
-
Ingår i: ACS Catalysis. - : American Chemical Society (ACS). - 2155-5435. ; 12:18, s. 11097-11107
-
Tidskriftsartikel (refereegranskat)abstract
- Molecular iron phthalocyanine (FePc) possesses an FeN4 active site structure similar to practical pyrolyzed Fe/N/C catalysts for the acidic oxygen reduction reaction (ORR), making it an ideal model system to derive the degradation mechanism of such catalysts. However, the degradation mechanism of FePc during the acidic ORR has been largely unclear to date. Herein, five most likely degradation factors affecting FePc-based ORR activity are individually investigated and compared. The attack by free radicals is found to be the main reason for the instability of FePc. Assisted by the combination of several spectroscopic methods, we successfully identify the degradation products and then propose a full structural evolution of molecular FePc degradation. Finally, high similarity in the decay mechanism between molecular FePc and practical Fe/N/C catalysts was present. This study provides a clear picture of the currently missing degradation mechanism of molecular FePc during acidic ORR, which will assist future investigations on the performance degradation of practical Fe/N/C catalysts.
|
|
44. |
- Wan, X., et al.
(författare)
-
Efficient and stable planar all-inorganic perovskite solar cells based on high-quality CsPbBr3 films with controllable morphology
- 2020
-
Ingår i: Journal of Energy Challenges and Mechanics. - : Elsevier. - 2056-9386. ; 46, s. 8-15
-
Tidskriftsartikel (refereegranskat)abstract
- All-inorganic cesium lead bromide (CsPbBr3) perovskite is attracting growing interest as functional materials in photovoltaics and other optoelectronic devices due to its superb stability. However, the fabrication of high-quality CsPbBr3 films still remains a big challenge by solution-process because of the low solubility of the cesium precursor in common solvents. Herein, we report a facile solution-processed approach to prepare high-quality CsPbBr3 perovskite films via a two-step spin-coating method, in which the CsBr methanol/H2O mixed solvent solution is spin-coated onto the lead bromide films, followed by an isopropanol-assisted post-treatment to regulate the crystallization process and to control the film morphology. In this fashion, dense and uniform CsPbBr3 films are obtained consisting of large crystalline domains with sizes up to microns and low defect density. The effectiveness of the resulting CsPbBr3 films is further examined in perovskite solar cells (PSCs) with a simplified planar architecture of fluorine‒doped tin oxide/compact TiO2/CsPbBr3/carbon, which deliver a maximum power conversion efficiency of 8.11% together with excellent thermal and humidity stability. The present work offers a simple and effective strategy in fabrication of high-quality CsPbBr3 films for efficient and stable PSCs as well as other optoelectronic devices.
|
|
45. |
|
|
46. |
|
|
47. |
- Wang, Yu-Cheng, et al.
(författare)
-
Porous Carbon Membrane-Supported Atomically Dispersed Pyrrole-Type Fe-N-4 as Active Sites for Electrochemical Hydrazine Oxidation Reaction
- 2020
-
Ingår i: Small. - : Wiley. - 1613-6810 .- 1613-6829. ; 16:31
-
Tidskriftsartikel (refereegranskat)abstract
- The rational design of catalytically active sites in porous materials is essential in electrocatalysis. Herein, atomically dispersed Fe-N-x sites supported by hierarchically porous carbon membranes are designed to electrocatalyze the hydrazine oxidation reaction (HzOR), one of the key techniques in electrochemical nitrogen transformation. The high intrinsic catalytic activity of the Fe-N-x single-atom catalyst together with the uniquely mixed micro-/macroporous membrane support positions such an electrode among the best-known heteroatom-based carbon anodes for hydrazine fuel cells. Combined with advanced characterization techniques, electrochemical probe experiments, and density functional theory calculation, the pyrrole-type Fe-N-4 structure is identified as the real catalytic site in HzOR.
|
|
48. |
- Weinstein, John N., et al.
(författare)
-
The cancer genome atlas pan-cancer analysis project
- 2013
-
Ingår i: Nature Genetics. - : Springer Science and Business Media LLC. - 1546-1718 .- 1061-4036. ; 45:10, s. 1113-1120
-
Forskningsöversikt (refereegranskat)abstract
- The Cancer Genome Atlas (TCGA) Research Network has profiled and analyzed large numbers of human tumors to discover molecular aberrations at the DNA, RNA, protein and epigenetic levels. The resulting rich data provide a major opportunity to develop an integrated picture of commonalities, differences and emergent themes across tumor lineages. The Pan-Cancer initiative compares the first 12 tumor types profiled by TCGA. Analysis of the molecular aberrations and their functional roles across tumor types will teach us how to extend therapies effective in one cancer type to others with a similar genomic profile. © 2013 Nature America, Inc. All rights reserved.
|
|
49. |
- Xi, Xue-Cheng, et al.
(författare)
-
Velocity planning in multi-axis EDM based on a coder-player architecture
- 2021
-
Ingår i: Journal of manufacturing systems. - : Elsevier BV. - 0278-6125 .- 1878-6642. ; 59, s. 299-309
-
Tidskriftsartikel (refereegranskat)abstract
- With a higher requirement on machining accuracy in electrical discharging machining (EDM), there is a drastically increased number of multi-axis line segments for machining complex workpieces. High speed jumping is needed for a conducive discharge gap status. The increased number of line segments, however, makes the implementation of high-speed jumping difficult. To alleviate the online computational burden for velocity planning, this paper proposes a multi-axis velocity planning based on a coder-player architecture. Under this architecture, a multi-axis feeding trajectory is represented by a series of double non-uniform rational B-spline (NURBS) curves, which are then interpolated by the unit arc length increment interpolation (UALII) method. Based on the interpolation points with a resolution of a basic length unit (BLU), a velocity limit curve is generated by considering simultaneously the constraints on chord error, acceleration and jerk. The velocity planning is implemented under a coder-player architecture. As a trajectory represented by a double-NURBS curve has C2 continuity, velocity losses can be avoided at junctions between line segments, thus smoothing of line segments at junctions is unnecessary in jumping. Machining tests showed that by the use of the velocity planning based on double-NURBS curves, the machining time for one channel of a shrouded blisk can be decreased by 29.38%.
|
|
50. |
- You, Qiangwei, et al.
(författare)
-
Microstructure and properties of porous SiC ceramics by LPCVI technique regulation
- 2017
-
Ingår i: Ceramics International. - : Elsevier BV. - 0272-8842 .- 1873-3956. ; 43:15, s. 11855-11863
-
Tidskriftsartikel (refereegranskat)abstract
- A new gradient pore structure in porous SiC ceramics was fabricated by low pressure chemical vapor infiltration (LPCVI). Effects of deposition duration on the mechanical properties and permeability of porous SiC ceramics were investigated. Results demonstrated that pore diameter and shapes decreased from the surface to the interior along with LPCVI duration. Porous SiC ceramics with deposition duration of 160 h exhibited flexural strength of 48.05 MPa and fracture toughness of 1.30 MPa m(1/2), where 221% and 189% improvements were obtained compared to porous SiC ceramics without LPCVI, due to CVI-SiC layer strengthening effect. Additionally, at the same gas velocity, pressure drop increase rate was faster due to apparent porosity and pore size change.
|
|