| 1. |
- Konold, Patrick E., et al.
(författare)
-
3D-printed sheet jet for stable megahertz liquid sample delivery at X-ray free-electron lasers
- 2023
-
Ingår i: IUCrJ. - : International Union Of Crystallography. - 2052-2525. ; 10, s. 662-670
-
Tidskriftsartikel (refereegranskat)abstract
- X-ray free-electron lasers (XFELs) can probe chemical and biological reactions as they unfold with unprecedented spatial and temporal resolution. A principal challenge in this pursuit involves the delivery of samples to the X-ray interaction point in such a way that produces data of the highest possible quality and with maximal efficiency. This is hampered by intrinsic constraints posed by the light source and operation within a beamline environment. For liquid samples, the solution typically involves some form of high-speed liquid jet, capable of keeping up with the rate of X-ray pulses. However, conventional jets are not ideal because of radiation-induced explosions of the jet, as well as their cylindrical geometry combined with the X-ray pointing instability of many beamlines which causes the interaction volume to differ for every pulse. This complicates data analysis and contributes to measurement errors. An alternative geometry is a liquid sheet jet which, with its constant thickness over large areas, eliminates the problems related to X-ray pointing. Since liquid sheets can be made very thin, the radiation-induced explosion is reduced, boosting their stability. These are especially attractive for experiments which benefit from small interaction volumes such as fluctuation X-ray scattering and several types of spectroscopy. Although their use has increased for soft X-ray applications in recent years, there has not yet been wide-scale adoption at XFELs. Here, gas-accelerated liquid sheet jet sample injection is demonstrated at the European XFEL SPB/SFX nano focus beamline. Its performance relative to a conventional liquid jet is evaluated and superior performance across several key factors has been found. This includes a thickness profile ranging from hundreds of nanometres to 60 nm, a fourfold increase in background stability and favorable radiation-induced explosion dynamics at high repetition rates up to 1.13 MHz. Its minute thickness also suggests that ultrafast single-particle solution scattering is a possibility.
|
|
| 2. |
- Wang, Cheng-Xiang, et al.
(författare)
-
On the Road to 6G: Visions, Requirements, Key Technologies, and Testbeds
- 2023
-
Ingår i: IEEE Communications Surveys and Tutorials. - : IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. - 1553-877X. ; 25:2, s. 905-974
-
Tidskriftsartikel (refereegranskat)abstract
- Fifth generation (5G) mobile communication systems have entered the stage of commercial deployment, providing users with new services, improved user experiences as well as a host of novel opportunities to various industries. However, 5G still faces many challenges. To address these challenges, international industrial, academic, and standards organizations have commenced research on sixth generation (6G) wireless communication systems. A series of white papers and survey papers have been published, which aim to define 6G in terms of requirements, application scenarios, key technologies, etc. Although ITU-R has been working on the 6G vision and it is expected to reach a consensus on what 6G will be by mid-2023, the related global discussions are still wide open and the existing literature has identified numerous open issues. This paper first provides a comprehensive portrayal of the 6G vision, technical requirements, and application scenarios, covering the current common understanding of 6G. Then, a critical appraisal of the 6G network architecture and key technologies is presented. Furthermore, existing testbeds and advanced 6G verification platforms are detailed for the first time. In addition, future research directions and open challenges are identified to stimulate the on-going global debate. Finally, lessons learned to date concerning 6G networks are discussed.
|
|
| 3. |
- Xu, Weicheng, et al.
(författare)
-
Nitrogen doping to accelerate the phase transition to ordered intermetallic Pt3Co catalyst for the oxygen reduction reaction in fuel cells
- 2023
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 11:8, s. 4078-4087
-
Tidskriftsartikel (refereegranskat)abstract
- Ordered intermetallic Pt–M alloys are foreseen to be promising as next-generation low-Pt catalysts for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFCs) due to their high catalytic activity and stability. Nevertheless, the disorder-to-order intermetallic phase transition often needs to proceed at elevated annealing temperature for a long time, which leads to severe particle agglomeration. Herein, an efficient nitrogen (N)-doping strategy is developed to speed up such phase transition in an intermetallic Pt3Co alloy catalyst, which shortens the annealing duration by 3–5 fold at a temperature of 600–800 °C. Such a strategy can not only minimize the particle agglomeration but also effectively optimize the electronic structure of surface Pt atoms with the incorporated N. The prepared N-doped ordered intermetallic Pt3Co catalyst exhibits high ORR activity among the best of the state-of-the-art, with mass activities of 1.21 and 1.20 A mgPt−1 at 0.90 V in rotating disk electrode (RDE) and proton exchange membrane fuel cell (PEMFC) tests, respectively. Moreover, with the total Pt loading of 0.15 mgPt cm−2, the H2–air PEMFC delivers a power density of 1.27 W cm−2 at 150 kPaabs and 0.6 V, corresponding to a high Pt utilization of 0.118 gPt kW−1 that has surpassed the DOE 2025 target (0.125 gPt kW−1). This study paves a new way to develop high-performance low-Pt ORR catalysts for PEMFCs.
|
|
