1. |
- Qian, Deping, et al.
(författare)
-
Correlating the Hybridization of Local-Exciton and Charge-Transfer States with Charge Generation in Organic Solar Cells
- 2023
-
Ingår i: Advanced Energy Materials. - : WILEY-V C H VERLAG GMBH. - 1614-6832 .- 1614-6840. ; 13
-
Tidskriftsartikel (refereegranskat)abstract
- In organic solar cells with very small energetic-offset (& UDelta;ELE - CT), the charge-transfer (CT) and local-exciton (LE) states strongly interact via electronic hybridization and thermal population effects, suppressing the non-radiative recombination. Here, we investigated the impact of these effects on charge generation and recombination. In the blends of PTO2:C8IC and PTO2:Y6 with very small, ultra-fast CT state formation was observed, and assigned to direct photoexcitation resulting from strong hybridization of the LE and CT states (i.e., LE-CT intermixed states). These states in turn accelerate the recombination of both CT and charge separated (CS) states. Moreover, they can be significantly weakened by an external-electric field, which enhanced the yield of CT and CS states but attenuated the emission of the device. This study highlights that excessive LE-CT hybridization due to very low , whilst enabling direct and ultrafast charge transfer and increasing the proportion of radiative versus non-radiative recombination rates, comes at the expense of accelerating recombination losses competing with exciton-to-charge conversion process, resulting in a loss of photocurrent generation.
|
|
2. |
- Yan, Xin, et al.
(författare)
-
Highly efficient ternary solar cells with reduced non-radiative energy loss and enhanced stability via two compatible non-fullerene acceptors
- 2022
-
Ingår i: Journal of Materials Chemistry A. - : ROYAL SOC CHEMISTRY. - 2050-7488 .- 2050-7496. ; 10:29, s. 15605-15613
-
Tidskriftsartikel (refereegranskat)abstract
- A ternary strategy by introducing a third component into a binary host system has been proven to be a simple and promising method to boost the power conversion efficiency (PCE) and stability of organic solar cells (OSCs). Herein, a high efficient ternary OSC is fabricated, wherein, a non-fullerene acceptor, namely MOIT-M, is introduced as a third component into the PM6:BTP-eC9 blend. MOIT-M possesses good complementary absorption spectra and aligned cascade energy levels with the host binary blend, which benefits light harvesting, exciton dissociation, and charge transport. Moreover, MOIT-M exhibits good miscibility with BTP-eC9, forming a well-mixed phase, which improves molecular packing for better charge transport and optimizes ternary blend morphology. Notably, the incorporation of MOIT-M suppresses non-radiative recombination, leading to reduced non-radiative energy losses (Delta E-nr). As a result, the ternary OSC exhibits a significantly increased PCE of 18.5% with a lower Delta E-nr of 0.21 eV in comparison with the control binary PM6:BTP-eC9 device with a PCE of 17.4% and a Delta E-nr of 0.24 eV. In addition, the ternary OSC displays better storage stability compared to the PM6:BTP-eC9 system. This work indicates that a ternary strategy via combining two compatible small molecule acceptors is effective to simultaneously improve the efficiency and stability of OSCs.
|
|
3. |
- Zhang, Zhiliang, et al.
(författare)
-
Enhancing intermolecular packing and light harvesting through asymmetric non-fullerene acceptors for achieving 18.7% efficiency ternary organic solar cells
- 2023
-
Ingår i: Journal of Materials Chemistry A. - : ROYAL SOC CHEMISTRY. - 2050-7488 .- 2050-7496. ; 11:28, s. 15553-15560
-
Tidskriftsartikel (refereegranskat)abstract
- In recent years, the ternary strategy has been proven to be an effective way to improve the performance of organic solar cells (OSCs). Herein, an asymmetric medium-band gap non-fullerene acceptor (AFIC) is synthesized and added as the third component into the PM6:BTP-eC9 binary blend for a highly efficient ternary OSC. AFIC exhibits a well-complementary absorption spectrum with the host binary blend, which benefits light harvesting of the active layer. Furthermore, AFIC shows a large dipole moment and good miscibility with BTP-eC9, which facilitates the formation of a stable well-mixed phase and enhances molecular packing in the blend, leading to improved charge transport and suppressed charge recombination in ternary devices. As a result, the ternary OSC based on PM6:BTP-eC9:AFIC demonstrates a significantly improved power conversion efficiency (PCE) of 18.7% while the binary OSC based on PM6:BTP-eC9 shows a PCE of 17.5%, which is attributed to the synergistic enhancement of the open-circuit voltage (V-oc), short-circuit current density (J(sc)), and fill factor (FF).
|
|
4. |
- Fan, Qunping, 1989, et al.
(författare)
-
A Non-Conjugated Polymer Acceptor for Efficient and Thermally Stable All-Polymer Solar Cells
- 2020
-
Ingår i: Angewandte Chemie - International Edition. - : Wiley. - 1433-7851 .- 1521-3773. ; 59:45, s. 19835-19840
-
Tidskriftsartikel (refereegranskat)abstract
- A non-conjugated polymer acceptor PF1-TS4 was firstly synthesized by embedding a thioalkyl segment in the mainchain, which shows excellent photophysical properties on par with a fully conjugated polymer, with a low optical band gap of 1.58 eV and a high absorption coefficient >105 cm−1, a high LUMO level of −3.89 eV, and suitable crystallinity. Matched with the polymer donor PM6, the PF1-TS4-based all-PSC achieved a power conversion efficiency (PCE) of 8.63 %, which is ≈45 % higher than that of a device based on the small molecule acceptor counterpart IDIC16. Moreover, the PF1-TS4-based all-PSC has good thermal stability with ≈70 % of its initial PCE retained after being stored at 85 °C for 180 h, while the IDIC16-based device only retained ≈50 % of its initial PCE when stored at 85 °C for only 18 h. Our work provides a new strategy to develop efficient polymer acceptor materials by linkage of conjugated units with non-conjugated thioalkyl segments.
|
|
5. |
- Liu, Tao, et al.
(författare)
-
16% efficiency all-polymer organic solar cells enabled by a finely tuned morphology via the design of ternary blend
- 2021
-
Ingår i: Joule. - : CELL PRESS. - 2542-4351. ; 5:4, s. 914-930
-
Tidskriftsartikel (refereegranskat)abstract
- A SUMMARY There is an urgent demand for all-polymer organic solar cells (AP-OSCs) to gain higher efficiency. Here, we successfully improve the performance to 16.09% by introducing a small amount of BN-T, a B <- N-type polymer acceptor, into the PM6:PY-IT blend. It has been found that BN-T makes the active layer, based on the PM6:PY-IT:BN-T ternary blend, more crystalline but meanwhile slightly reduces the phase separation, leading to enhancement of both exciton harvesting and charge transport. From a thermodynamic viewpoint, BN-T prefers to reside between PM6 and PY-IT, and the fraction of this fine-tunes the morphology. Besides, a significantly reduced nonradiative energy loss occurs in the ternary blend, along with the coexistence of energy and charge transfer between the two acceptors. The progressive performance facilitated by these improved properties demonstrates that AP-OSCs can possibly comparably efficient with those based on small molecule acceptors, further enhancing the competitiveness of this device type.
|
|
6. |
- Yang, Ding, et al.
(författare)
-
High-performance semitransparent organic solar cells enabled by pseudo-planar heterojunction structures combined with optical engineering
- 2022
-
Ingår i: Journal of Materials Chemistry C. - : ROYAL SOC CHEMISTRY. - 2050-7526 .- 2050-7534. ; 10:39, s. 14597-14604
-
Tidskriftsartikel (refereegranskat)abstract
- Semitransparent organic solar cells (ST-OSCs) are emerging as a promising renewable energy technology for building integration. However, how to solve the trade-off between power-conversion efficiency (PCE) and average visible transmittance (AVT) is always the key point for the further development of ST-OSCs. Herein, a pseudo-planar heterojunction (PPHJ) active layer, by sequentially depositing a polymer donor layer (PM6) and a small-molecule acceptor layer (BTP-eC9), was employed to improve the device performance and AVT, resulting in PCEs of 18.5% for opaque devices and 13.3% for semitransparent OSCs with an AVT of 18.5%. Furthermore, by introducing an effective anti-reflective covering layer, the AVT of the ST-OSCs was further improved up to 27.8% with little minus effect on the PCE (13.1%), as well as an impressive light-utilization efficiency (LUE) of 3.64% and a color-rendering index (CRI) of 94.6. It is worth noting that the PCE of 13.1% is the highest value at an AVT of over 25%. Our strategy represents a unique approach for improving the AVT and PCE of ST-OSCs simultaneously, facilitating the commercial development of OSCs.
|
|
7. |
- Chen, Xian-Kai, et al.
(författare)
-
A unified description of non-radiative voltage losses in organic solar cells
- 2021
-
Ingår i: Nature Energy. - : Springer Nature. - 2058-7546. ; 6:8, s. 799-806
-
Tidskriftsartikel (refereegranskat)abstract
- Organic solar cells based on non-fullerene acceptors have enabled high efficiencies yet their charge dynamics and its impact on the photovoltaic parameters are not fully understood. Now, Chen et al. provide a general description of non-radiative voltage losses in both fullerene and non-fullerene solar cells. Recent advances in organic solar cells based on non-fullerene acceptors (NFAs) come with reduced non-radiative voltage losses (Delta V-nr). Here we show that, in contrast to the energy-gap-law dependence observed in conventional donor:fullerene blends, the Delta V-nr values in state-of-the-art donor:NFA organic solar cells show no correlation with the energies of charge-transfer electronic states at donor:acceptor interfaces. By combining temperature-dependent electroluminescence experiments and dynamic vibronic simulations, we provide a unified description of Delta V-nr for both fullerene- and NFA-based devices. We highlight the critical role that the thermal population of local exciton states plays in low-Delta V-nr systems. An important finding is that the photoluminescence yield of the pristine materials defines the lower limit of Delta V-nr. We also demonstrate that the reduction in Delta V-nr (for example, <0.2 V) can be obtained without sacrificing charge generation efficiency. Our work suggests designing donor and acceptor materials with high luminescence efficiency and complementary optical absorption bands extending into the near-infrared region.
|
|
8. |
- Hu, Wei, et al.
(författare)
-
Axisymmetric and Asymmetric Naphthalene-Bisthienothiophene Based Nonfullerene Acceptors: On Constitutional Isomerization and Photovoltaic Performance
- 2020
-
Ingår i: ACS Applied Energy Materials. - : American Chemical Society (ACS). - 2574-0962. ; 3:6, s. 5734-5744
-
Tidskriftsartikel (refereegranskat)abstract
- Two pairs of constitutional isomers of fused-octacyclic nonfullerene acceptors (NFAs) based on a naphthalene-bisthienothiophene core with or without fluorination at the ending groups have been developed. Compared with the axisymmetric NFAs N66-IC and N66-2FIC with two six-member-ring bridges, their asymmetric constitutional isomers N65-IC and N65-2FIC both with one six-member-ring bridge and one five-member-ring bridge exhibit remarkable red-shifted absorption, higher crystallinity, and slightly down-shifted LUMO energy levels. Organic solar cells based on PBDB-T-2F:N65-2FIC achieved a promising power conversion efficiency of 10.19%, which is three times higher than that of its counterpart PBDB-T-2F:N66-2FIC cell (3.46%). While being blended with PBDB-T as the donor material, the asymmetric acceptor analogue N65-IC based solar cell pronounces a PCE of 9.03%, being significantly improved from that of 5.45% for the PBDB-T:N66-IC based cell, which is in consistency with the results from those cells from their both fluorinated donor and acceptor counterparts. Design rules on either both fluorinated, both nonfluorinated, or cross-combined donor/acceptors for device fabrication has been explored. In addition, PBDB-T-2F:N65-2FIC possesses very promising device stability with 85% of its initial PCE after an exposure time of 1500 h under one sun illumination, which is meaningful for their future commercial devices.
|
|
9. |
- Liu, Shungang, et al.
(författare)
-
The role of connectivity in significant bandgap narrowing for fused-pyrene based non-fullerene acceptors toward high-efficiency organic solar cells
- 2020
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 8:12, s. 5995-6003
-
Tidskriftsartikel (refereegranskat)abstract
- Great attention has been paid to developing low bandgap non-fullerene acceptors (NFAs) for matching wide bandgap donor polymers to increase the photocurrent and therefore the power conversion efficiencies (PCEs) of NFA organic solar cells, while pyrene-core based acceptor-donor-acceptor (A-D-A) NFAs have been mainly reported via the 2,9-position connection due to their bisthieno[3′,2′-b']thienyl[a,h]pyrene fused via a five-membered ring bridge at the ortho-position of pyrene as the representative one named FPIC5, which has prohibited further narrowing their energy gap. Herein, an acceptor FPIC6 was exploited by creating the 1,8-position connection through fusing as bisthieno[3′,2′-b′]thienyl[f-g,m-n]pyrene linked at the bay-position via a six-membered bridge, with enhanced push-pull characteristics within such A-D-A structure. As a structural isomer of FPIC5, FPIC6 exhibited a much lower bandgap of 1.42 eV (1.63 eV for FPIC5). Therefore, the photocurrent and PCE of PTB7-Th:FPIC6 cells were improved to 21.50 mA cm-2 and 11.55%, respectively, due to the balanced mobilities, better photoluminescence quenching efficiency and optimized morphology, which are both ∼40% better than those of PTB7-Th:FPIC5 cells. Our results clearly proved that a pyrene fused core with 1,8-position connection with electron-withdrawing end groups instead of 2,9-position connection is an efficient molecular design strategy to narrow the optical bandgap and improve the photovoltaic performance of NFA based OSCs.
|
|
10. |
- Su, Wenyan, et al.
(författare)
-
13.4 % Efficiency from All-Small-Molecule Organic Solar Cells Based on a Crystalline Donor with Chlorine and Trialkylsilyl Substitutions
- 2021
-
Ingår i: ChemSusChem. - : Wiley. - 1864-5631 .- 1864-564X. ; 14:17, s. 3535-3543
-
Tidskriftsartikel (refereegranskat)abstract
- How to simultaneously achieve both high open-circuit voltage (Voc) and high short-circuit current density (Jsc) is a big challenge for realising high power conversion efficiency (PCE) in all-small-molecule organic solar cells (all-SM OSCs). Herein, a novel small molecule (SM)-donor, namely FYSM−SiCl, with trialkylsilyl and chlorine substitutions was designed and synthesized. Compared to the original SM-donor FYSM−H, FYSM−Si with trialkylsilyl substitution showed a decreased crystallinity and lower highest occupied molecular orbital (HOMO) level, while FYSM−SiCl had an improved crystallinity, more ordered packing arrangement, significantly lower HOMO level, and predominant “face-on” orientation. Matched with a SM-acceptor Y6, the FYSM−SiCl-based all-SM OSCs exhibited both high Voc of 0.85 V and high Jsc of 23.7 mA cm−2, which is rare for all-SM OSCs and could be attributed to the low HOMO level of FYSM−SiCl donor and the delicate balance between high crystallinity and suitable blend morphology. As a result, FYSM−SiCl achieved a high PCE of 13.4 % in all-SM OSCs, which was much higher than those of the FYSM−H- (10.9 %) and FYSM−Si-based devices (12.2 %). This work demonstrated a promising method for the design of efficient SM-donors by a side-chain engineering strategy via the introduction of trialkylsilyl and chlorine substitutions.
|
|
11. |
- Wu, Jingnan, et al.
(författare)
-
Carboxylate substituted pyrazine: A simple and low-cost building block for novel wide bandgap polymer donor enables 15.3% efficiency in organic solar cells
- 2021
-
Ingår i: Nano Energy. - : Elsevier BV. - 2211-2855. ; 82
-
Tidskriftsartikel (refereegranskat)abstract
- In addition to high power conversion efficiency (PCE) and good stability, the low-cost of photovoltaic materials is also very important for the practical application of organic solar cells (OSCs). Herein, we synthesized a carboxylate substituted pyrazine-based electron-deficient building block (DTCPz) with a simple structure and low synthetic cost, and then developed a novel wide bandgap polymer donor PFBCPZ. Due to the synergistic electron-withdrawing effects of the fluorination in donor unit (BDT-TF) and esterification and C=N double-bond in DTCPz unit, PFBCPZ shows a deeper HOMO level of −5.60 eV, a strong intermolecular π-π interaction, good crystallinity and stacking, and high hole-mobility of 2.11 × 10−3 cm2 V−1 s−1. Matched with a low bandgap acceptor IT-4F, excellent charge transfer, weak recombination, and small non-radiative energy loss in OSCs was achieved, resulting in an impressive fill factor of 0.785 and a high open-circuit voltage of 0.92 V. As a result, a PCE of up to 15.3% is obtained in OSCs, which is the highest value in the IT-4F-based binary OSCs so far and indicates that low-cost DTCPz with a simple structure is a promising building block to construct high-performance polymer donors for application in efficient OSCs.
|
|
12. |
- Wu, Jingnan, 1994, et al.
(författare)
-
Modulating the nanoscale morphology on carboxylate-pyrazine containing terpolymer toward 17.8% efficiency organic solar cells with enhanced thermal stability
- 2022
-
Ingår i: Chemical Engineering Journal. - : Elsevier BV. - 1385-8947. ; 446
-
Tidskriftsartikel (refereegranskat)abstract
- It had been commonly accepted in the organic photovoltaic (OPV) community that subtle variations in the molecular structure of active layer materials would cause profound impacts on their aggregating structure and blend morphology and therefore the performance of such polymer solar cells (PSCs). Herein, we employed an electron-deficient building block 3,6-dithiophenyl-2-carboxylate pyrazine (DTCPz) for constructing one series of promising donor terpolymers of PMZ1, PMZ2, and PMZ3, respectively, gaining their relatively lower-lying highest occupied molecular orbital (HOMO) energy levels, more closed π-π stacking and enhanced crystallinity in thin films, and lower miscibility with acceptor Y6, in comparison with their parent polymer counterpart (namely PM6). Reaching DTCPz moieties up to 20% (mol/mol%) in its terpolymer composition, the resulting polymer (PMZ2) achieved more favorable phase separation with improved exciton dissociation, and charge transport and extraction. As a result, an outstanding fill factor of 77.2% and a promising power conversion efficiency of 17.8 % was achieved. Moreover, the corresponding device shows better thermal stability over the PM6-based one. This work suggests a facile method for significantly improving the thin film morphology of the active-layer materials via fine-tuning the chemical structure of electron-deficient units on the backbone of the wide bandgap donor polymer, therefore achieving enhanced photovoltaic performance and thermal stability for practical applications.
|
|
13. |
- Wu, Jingnan, 1994, et al.
(författare)
-
New Electron Acceptor with End-Extended Conjugation for High-Performance Polymer Solar Cells
- 2021
-
Ingår i: Energy & Fuels. - : American Chemical Society (ACS). - 1520-5029 .- 0887-0624. ; 35:23, s. 19061-19068
-
Tidskriftsartikel (refereegranskat)abstract
- To develop high-efficiency polymer solar cells (PSCs), the acceptors in a bulk heterojunction (BHJ) blend are supposed to possess complementary absorption bands in the near-infrared region and a suitable energy level to be well-matched with the donors. In this work, a new small molecular acceptor (SMA) named IDTT8-N based on an indacenodithienothiophene (IDTT) core was designed and synthesized. In comparison to the counterpart molecule IDTN with an indacenodithiophene (IDT) core, IDTT8-N with the extended π-conjugation length of an IDT core not only exhibits a red shift of ca. 35 nm in optical absorption but also has little change on its lowest unoccupied molecular orbital (LUMO) energy level. Therefore, PSCs based on PM6:IDTT8-N exhibit a superior short-circuit current density (Jsc) and high open-circuit voltage (Voc). Moreover, apart from the strong face-on molecular stacking, distinct end-group π-πstacking of IDTT8-N can be observed in the blends, facilitating the charge transport. Therefore, the optimized PM6:IDTT8-N-based devices exhibit dramatically high and balanced electron mobility (μe) and hole mobility (μh), whose magnitudes are over 10-3 cm2 V-1 s-1. Consequently, an extraordinary PCE of 14.1% with a relatively high Jsc of 20.98 mA cm-2 and a Voc of 0.94 V was recorded. To our knowledge, it is the new record among PSCs with a SMA based on 2-(3-oxocyclopentylidene)malononitrile (INCN) as end groups. These results indicate that extending the π-conjugation length of the fused ring core of a SMA is an efficient method to both enhance the absorption and the molecular interaction of the acceptor as well as the photovoltaic performance of PSCs.
|
|
14. |
- Wu, Jingnan, 1994, et al.
(författare)
-
On the Conformation of Dimeric Acceptors and Their Polymer Solar Cells with Efficiency over 18 %
- 2023
-
Ingår i: Angewandte Chemie International Edition. - : John Wiley & Sons. - 1433-7851 .- 1521-3773. ; 62:45
-
Tidskriftsartikel (refereegranskat)abstract
- The determination of molecular conformations of oligomeric acceptors (OAs) and their impact on molecular packing are crucial for understanding the photovoltaic performance of their resulting polymer solar cells (PSCs) but have not been well studied yet. Herein, we synthesized two dimeric acceptor materials, DIBP3F-Se and DIBP3F-S, which bridged two segments of Y6-derivatives by selenophene and thiophene, respectively. Theoretical simulation and experimental 1D and 2D NMR spectroscopic studies prove that both dimers exhibit O-shaped conformations other than S- or U-shaped counter-ones. Notably, this O-shaped conformation is likely governed by a distinctive "conformational lock" mechanism, arising from the intensified intramolecular & pi;-& pi; interactions among their two terminal groups within the dimers. PSCs based on DIBP3F-Se deliver a maximum efficiency of 18.09 %, outperforming DIBP3F-S-based cells (16.11 %) and ranking among the highest efficiencies for OA-based PSCs. This work demonstrates a facile method to obtain OA conformations and highlights the potential of dimeric acceptors for high-performance PSCs.
|
|