| 1. |
|
|
| 2. |
- Malakuti, Iman, et al.
(författare)
-
Bilateral TMJ Ankylosis: Total Joint Reconstruction in a Patient With Zero Mouth Opening : A Case Report
- 2032
-
Ingår i: Craniomaxillofacial research & Innovation. ; 8:1-6
-
Tidskriftsartikel (refereegranskat)abstract
- Present a case of a young patient with bilateral bony ankylosis of the TMJ with zero mouth opening treated with TMJ prosthesis.MethodsThe ankylosis was studied in detail with computed tomography (CT) and we used virtual surgical planning in the pre-operative phase to provide splints and cutting guides. The patient was treated with bilateral custom-made alloplastic TMJ prosthesis.ResultsOptimal functional improvement at the 5.5 year follow up after total joint reconstruction without any adverse effects. Mouth opening was 35 mm and the patient was free from pain. CT-images showed no signs of pathology or increased remodeling and bone formation.ConclusionAnkylosis of the TMJ in young and adult population presents unique challenges given the need to account for growth of the mandible and anatomical variations. This report supports the use of total joint reconstruction for end-stage TMJ disease.
|
|
| 3. |
- Engleryd, Anna, et al.
(författare)
-
Air pollution and Climate Change
- 2029
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- In order to evaluate the role of air pollution and air pollution control for climate policies, SwedishEnvironmental Protection Agency invited leading experts and scientists, senior administrators andnegotiators, international organisations and industry to an international workshop in Gothenburg, Sweden,19-21 October 2009.
|
|
| 4. |
- Glatz, Terese, 1983-, et al.
(författare)
-
A Systematic Review of Parental Self-efficacy Among Parents of School-Age Children and Adolescents
- 2029
-
Ingår i: Adolescent Research Review. - : Springer. - 2363-8346 .- 2363-8354. ; 9:1, s. 75-91
-
Forskningsöversikt (refereegranskat)abstract
- What function does parental self-efficacy have for parenting behaviors and children's adjustment, and what explains individual variations in parents' self-efficacy? Parental self-efficacy involves parents' beliefs about their influence on their children and this systematic review presents results from 35 empirical studies published between 2003 and 2022 among parents of school-aged children and adolescents. First, the studies in this review show a bi-directional association between parental self-efficacy and positive parenting, and some empirical evidence that parental self-efficacy influences children indirectly, via parenting. The few longitudinal studies examining associations between parental self-efficacy and child behaviors suggest that self-efficacy might emerge as a reaction to children's behaviors. Second, many child, parent, and sociocultural factors were shown to predict parental self-efficacy (e.g., child gender and age, parents' psychological well-being, and socio-economic status), and results suggest that these associations are similar across multiple countries and age groups. Finally, studies reporting on parental self-efficacy at different time points or a correlation between self-efficacy and the child's age suggested that parental self-efficacy decreases over the school-age and adolescent period. This review shows the complex role of parental self-efficacy in associations with parent and child factors, and it also highlight questions to address for future research.
|
|
| 5. |
|
|
| 6. |
- Abdi, Somayeh, et al.
(författare)
-
Deadline-constrained security-aware workflow scheduling in hybrid cloud architecture
- 2025
-
Ingår i: Future Generation Computer Systems. - : Elsevier B.V.. - 0167-739X .- 1872-7115. ; 162
-
Tidskriftsartikel (refereegranskat)abstract
- A hybrid cloud is an efficient solution to deal with the problem of insufficient resources of a private cloud when computing demands increase beyond its resource capacities. Cost-efficient workflow scheduling, considering security requirements and data dependency among tasks, is a prominent issue in the hybrid cloud. To address this problem, we propose a mathematical model that minimizes the monetary cost of executing a workflow and satisfies the security requirements of tasks under a deadline. The proposed model fulfills data dependency among tasks, and data transmission time is formulated with exact mathematical expressions. The derived model is a Mixed-integer linear programming problem. We evaluate the proposed model with real-world workflows over changes in the input variables of the model, such as the deadline and security requirements. This paper also presents a post-optimality analysis that investigates the stability of the assignment problem. The experimental results show that the proposed model minimizes the cost by decreasing inter-cloud communications for dependent tasks. However, the optimal solutions are affected by the limitations that are imposed by the problem constraints.
|
|
| 7. |
- Achieng, Pauline, et al.
(författare)
-
Reconstructing of the radiation condition and solution for a variable coefficient Helmholtz equation in a semi-infinite strip from Cauchy data on an interior segment
- 2025
-
Ingår i: Journal of Mathematical Analysis and Applications. - : ACADEMIC PRESS INC ELSEVIER SCIENCE. - 0022-247X .- 1096-0813. ; 541:1
-
Tidskriftsartikel (refereegranskat)abstract
- We consider the Helmholtz equation with a variable coefficient in a semi-infinite strip. Homogeneous Neumann conditions are prescribed on a part of the boundary of the strip. Our aim is to find the unknown function in the Dirichlet boundary condition on the remaining part of the boundary from measurements taken on a segment inside the semi-infinite strip. We assume that the radiation condition at infinity is unknown and must be found also. The main difficulty here is the variable coefficient in the Helmholtz equation which does not allow to apply the method of separation of variable as was done in [2]. Such problems appear in acoustics to determine acoustical sources and surface vibrations from acoustic field measurements in non-uniform mediums. We split the problem in two parts. One consists of finding the radiation condition and this problem is well-posed. We derive the equation for finding the parameter of the radiation condition, that holds at infinity. The second one is to find the Dirichlet data and this problem is ill-posed. We present an operator equation with compact operator for finding the Dirichlet data. (c) 2024 The Author(s). Published by Elsevier Inc. This is an open access article under the CC BY license (http://creativecommons .org /licenses /by /4 .0/).
|
|
| 8. |
- Adami, Rebecca, 1982-
(författare)
-
Childism, Intersectionality and the Rights of the Child : The myth of a happy childhood
- 2025
-
Bok (refereegranskat)abstract
- This book is the first to comprehensively develop the concept of childism to understand, study and analyse age-based discrimination against children.It presents a critical theory to help comprehend intersecting prejudice against children and to examine the weak implementation of the UN Convention on the Rights of the Child (CRC), and in what ways violations against children can be analysed through the intersections of racist, sexist and ableist discrimination. The book further offers scholars a new perspective when studying structural forms of discrimination and oppression against children and provides professionals with a new vocabulary on prejudice targeting children when assessing theory, policy and praxis on ‘child-friendly’ and ‘child-centred’ initiatives that overlook the need to protect children against discrimination.This book will be of key interest to scholars, students and practitioners of human rights, child and youth studies, education, prejudice studies, the United Nations and child law, and more broadly to sociology, social policy, psychology, and social work.
|
|
| 9. |
|
|
| 10. |
- Almkvist, Gustaf, 1985-
(författare)
-
Corporate Criminal Liability : Two Nordic Solutions
- 2025
-
Ingår i: Corporate Criminal Liability and Sanctions. - Abingdon : Routledge. - 9781032349961 ; , s. 51-61
-
Bokkapitel (refereegranskat)abstract
- In this chapter, the systems of Corporate Criminal Liability in four Nordic jurisdictions are examined, as interesting examples of the challenges - and possibilities - of Corporate Criminal Liability. It is argued that a credible model of attributing action to the company must be established, if a criminal sanction against a company is to be understood as a punishment in the sense that it attributes blame. In that regard, attribution can be based either on identification or on a concept of corporate negligence. Identification, where the actions of a representative of a company are attributed directly to the company, does not offer any considerable normative challenges. When corporate negligence is considered, however, the Nordic countries differ in an interesting way. Denmark and Norway share a system of primary corporate criminal liability, where the actions of several individuals can be cumulated and attributed to the company in a way where the company appears to be a genuine actor. Once cumulated, there is very limited room for the company to argue that it has not acted negligently. Sweden and Finland, on the other hand, in principle understand Corporate Criminal Liability as accessory to the crimes of individuals. In order to attribute such crimes, a test of corporate negligence is then employed, where it is determined whether the company has negligently failed to prevent the crimes of the individuals. While the accessory solution in Sweden and Finland appears to be an unnecessary limitation, the negligence test employed in those jurisdictions appears as an interesting model for understanding what it might mean to attribute blame to a company in the Criminal Law, and, in a deeper sense, for a concept of corporate guilt.
|
|
| 11. |
- Alqudhaibi, Adel, et al.
(författare)
-
Securing Industry 4.0: Assessing Cybersecurity Challenges and Proposing Strategies for Manufacturing Management
- 2025
-
Ingår i: Cyber Security and Applications. - 2772-9184. ; 3
-
Tidskriftsartikel (refereegranskat)abstract
- Industry 4.0 represents the foundation of the fourth industrial revolution, characterised by the integration of innovative technology into the manufacturing process. This integration enhances automation, diagnostics, data analysis, and autonomous decision-making through the networking of equipment and machinery. However, the increased reliance on technology raises concerns about the implementation and maintenance of cybersecurity. This paper aims to address cybersecurity challenges in the manufacturing industry and suggest strategies to reduce risks. In particular, it examines the level of awareness and understanding of cybersecurity issues among manufacturing employees, establishes accountability for cyberattacks, and evaluates the effectiveness of existing industry practices. The current cybersecurity landscape in the manufacturing industry was thoroughly analysed. Data were gathered through surveys, interviews, and case studies to measure awareness, identify knowledge gaps, and assess existing practices. The research findings indicate a significant knowledge gap regarding cybersecurity among manufacturing employees. This vulnerability can be attributed to the lack of funding and training, especially compared to the resources provided to information technology departments and corporate employees. The study emphasises the importance of redirecting cybersecurity resources and protocols towards the manufacturing industry. This paper puts forward a series of recommendations to mitigate risks and safeguard the manufacturing industry.
|
|
| 12. |
- Artero-Real, A., et al.
(författare)
-
Evaluating edge joint preparation impact on penetration depth in laser-arc hybrid welding
- 2025
-
Ingår i: Optics and Laser Technology. - : Elsevier Ltd. - 0030-3992 .- 1879-2545. ; 181:part A
-
Tidskriftsartikel (refereegranskat)abstract
- Nowadays, conventional welding technologies such as submerged arc welding (SAW) are still used in most heavy-steel industries. This type of traditional technology means that welding takes up a large part of the productive time. As a solution to this problem, there are welding methods, such as Laser-Arc Hybrid Welding (LAHW), that have the potential to reduce the cost of manufacturing large steel structures. This is possible due to the reduced number of weld passes required to join thicker steel sections, as large thicknesses can be welded in one or a few passes.A problem with LAHW is achieving satisfactory quality. For this reason, it is essential to study the starting conditions, e.g. edge joint preparation. The target of this research work is to find out the relationship between the penetration value of the weld bead obtained and the edge joint preparation. The evolution of the molten pool and the behavior of the molten material in the joint is discussed for the different edge joint preparation configurations. The effect of the roughness is that it affects the wetting of the molten material in the joint, which would affect the penetration result, together with the gap and air volume gap used in the joint. Cut-wire is also used in the research, in samples that presented a larger air volume gap. The behavior of the molten metal inside the joint in this case is also discussed. In addition, the quality of the weld beads has also been determined by making macrographs, microstructural analysis, X-ray, microhardness profiles, tensile test and Charpy test. Some pores and cracks have been found, although destructive tests show adequate behavior of the weld bead. It is possible to elucidate from the findings that as the roughness, gap and/or air volume gap of the edge joint increases, the penetration value obtained increases. Cut-wire samples obtained full penetration.
|
|
| 13. |
- Aryapoor, Masood, et al.
(författare)
-
Flipped non-associative polynomial rings and the Cayley-Dickson construction
- 2025
-
Ingår i: Journal of Algebra. - 0021-8693 .- 1090-266X. ; 662, s. 482-501
-
Tidskriftsartikel (refereegranskat)abstract
- We introduce and study flipped non-associative polynomial rings. In particular, we show that all Cayley–Dickson algebras naturally appear as quotients of a certain type of such rings; this extends the classical construction of the complex numbers (and quaternions) as a quotient of a (skew) polynomial ring to the octonions, and beyond. We also extend some classical results on algebraic properties of Cayley–Dickson algebras by McCrimmon to a class of flipped non-associative polynomial rings.
|
|
| 14. |
- Baha, Ehsan, et al.
(författare)
-
Book Review: A Dialogue for Design and Democracy: Activist Thoughts and Practical Examples for Sociopolitical Empowerment
- 2025
-
Ingår i: Design Issues. - 1531-4790 .- 0747-9360.
-
Tidskriftsartikel (refereegranskat)abstract
- The book Design and Democracy: Activist Thoughts and Practical Examples for Sociopolitical Empowerment, edited by Michael Erlhoff and Maziar Rezai, was released in April 2021 and features a compilation of 12 thought-provoking chapters contributed by various authors. These chapters delve into the intricate relationships and dynamic interplay between design and democracy. While previous reviews in journals such as The Design Journal, Design and Culture, and Design Studies have offered insights into this notable publication, this review addresses crucial aspects that remain unexplored. It underscores the book's unique perspectives, which are paramount for shaping the trajectory of future research and practice within the realm of design and democracy. Specifically, this review highlights the potential and limitations of design in serving democracy, as well as explores democracy's diverse, agnostic, and norm-breaking nature—considered through both theoretical and practical perspectives.
|
|
| 15. |
- Battestini-Vives, Mariona, et al.
(författare)
-
Response surface methodology to optimize membrane cleaning in nanofiltration of kraft black liquor
- 2025
-
Ingår i: Separation and Purification Technology. - 1383-5866. ; 354
-
Tidskriftsartikel (refereegranskat)abstract
- Better understanding of membrane fouling and cleaning can help implementation of membrane filtration processes in the pulp and paper industry. The aim of this study was to optimize membrane cleaning in the nanofiltration of kraft black liquor ultrafiltered permeate for the recovery of lignin. This work wants to assess whether the cleaning process removes the main foulants; as well as the economic viability of the optimized cleaning compared to a standard cleaning in a nanofiltration membrane plant on industrial scale. The optimization of membrane cleaning was investigated using the response surface methodology. The factors studied were time, temperature, and cleaning agent (Ultrasil 110) concentration, and flux recovery was used to evaluate the success of cleaning. Experiments were performed on laboratory scale where flat-sheet polymeric membranes were fouled with kraft black liquor ultrafiltered permeate and cleaned using various combinations of the three factors. The model developed predicted a flux recovery of 88 % when cleaning was performed for 60 min with a solution of 0.8 wt% Ultrasil 110 at 40 °C. The flux recovery measured experimentally with these cleaning parameters was 80 %. Scanning electron microscopy combined with energy-dispersive X-ray spectroscopy analysis confirmed that the optimized cleaning removed the main foulants from the membrane surface. Moreover, increasing the cleaning agent concentration or the cleaning temperature did not always lead to a higher flux recovery. The techno-economic evaluation revealed that 16 % of the cleaning costs could be saved by optimizing the cleaning process.
|
|
| 16. |
- Boström, Magnus, 1981-
(författare)
-
The Multifaceted Seafarer: An Explorative Discourse Analysis of Seafarers’ Portrayals in Swedish Maritime Magazines
- 2025
-
Ingår i: Ocean and Society. - : Cogitatio Press. ; 2
-
Tidskriftsartikel (refereegranskat)abstract
- Seafaring is a highly male‐dominated occupation. Within the industry, there is an ambition to increase the proportion of women working in maritime professions. In this endeavor, it is relevant to examine how seafarers are portrayed in various contexts. This study aimed to explore the image of seafarers as presented in Swedish maritime magazines: How are seafarers described, and can these descriptions be seen as performative in shaping a professional identity? To meet this aim, a discourse analysis was performed, based on 20 texts from two maritime magazines, representing both rating and officer seafarers. Overall, six subject positions inhabited by seafarers were identified, with several overlapping characteristics. For example, traits of the traditional seafarer were also found in the masculine seafarer and the flexible seafarer. Furthermore, it is argued that several of the subject positions are difficult to combine with what is referred to as the gender‐equal seafarer, mainly due to challenges in balancing family life with extended periods at sea. The study shows that today’s seafarers, according to how they are depicted in Swedish maritime magazines, have considerable agency in shaping their own professional identity without being forced to conform to a hegemonic masculinity. Finally, it is suggested that the term “seafarer” be used instead of “seaman” in both print and everyday conversations, for increased inclusiveness and representation.
|
|
| 17. |
|
|
| 18. |
|
|
| 19. |
|
|
| 20. |
- Cheng, Yaopeng, et al.
(författare)
-
Differential laser-induced thermoelastic spectroscopy for dual-gas CO2/CH4 detection
- 2025
-
Ingår i: Measurement. - : Elsevier BV. - 0263-2241 .- 1873-412X. ; 240
-
Tidskriftsartikel (refereegranskat)abstract
- A novel differential laser-induced thermoelastic spectroscopy (D-LITES) was demonstrated. In D-LITES, one probe and one control laser beam with different modulation phases were combined to generate two quartz tuning fork (QTF) mechanical oscillations, which are pi out of phase. The powers of the two lasers were adjusted to balance out the background noise. The differential signal was acquired by demodulating the QTF piezoelectric signal. The D-LITES sensor had a compact and cost-effective one-path configuration and was able to realize dualgas detection. Carbon dioxide (CO2) and methane (CH4) were chosen as target gases to verify the D-LITES sensor performance. With the D-LITES technique, the background noise was greatly suppressed. The minimum detection limit (MDL) was improved by 9 times from 260 ppm to 29 ppm and 7.13 times from 0.385 ppm to 0.054 ppm for CO2 and CH4 detection, respectively.
|
|
| 21. |
- De Ridder, Reglindis, Associate Professor
(författare)
-
AVT and agency : Revoicing to give a voice to minoritized language communities
- 2025
-
Ingår i: Journal of Audiovisual Translation. - 2617-9148.
-
Tidskriftsartikel (refereegranskat)abstract
- At the 10th Media for All conference, the meagre representation of minoritized languages (including sign language) in audiovisual media on streaming platforms was tackled. In this way, the very ideal of media for all was challenged. Global streaming platforms tend to adopt a ‘one size fits all’ approach in limiting their language settings to a minimum. While the users of minoritized languages often are proficient in the dominant language of their country, it is absolutely crucial that content is available in their smaller — and often endangered — languages as well. Some streaming platforms of local public service broadcasters try to accommodate this need. Still, the questions remain: to what extent do not only minoritized languages users, but also the speakers of the majority languages encounter these minoritized languages in audiovisual content, how linguistically diverse and inclusive is this content, but also: what role can audiovisual translation play here? In this article, the importance of audiovisual translation in and out of minoritized languages, with a special focus on revoicing, is discussed. The children’s content broadcast by Swedish public service broadcaster in the national minority languages and sign language is used as a case study.
|
|
| 22. |
- De Ridder, Reglindis, Associate Professor
(författare)
-
Minority/minoritized language audiovisual translation for younger audiences
- 2025
-
Ingår i: The Routledge handbook of translation and children’s literature and media. - London : Routledge.
-
Bokkapitel (refereegranskat)abstract
- Revoicing has historically been used to translate children’s audiovisual content. Of the various audiovisual translation (AVT) modes, lip-sync dubbing completely replaces the original dialogue track with a recording of the translated dialogue lines in the target language. Off-screen narration is also used to guide children through a programme, usually in the form of voice-over that does not include traces of the source language. In addition to animated children’s programmes, live-action content targeting older children that used to be subtitled in so-called ‘subtitling countries’ is likewise often dubbed nowadays. Other than dubbing, different AVT modes can be combined within the same programme to make children’s content accessible to audiences with special needs or specific linguistic preferences. Furthermore, besides professional AVT, efforts by laypersons and language activists to provide content in minority languages are also important. In this chapter, AVT in and out of minority/minoritized languages is discussed, including aspects such as the role of language planning and the language acquisition impact on younger audiences.
|
|
| 23. |
- Fome, Anna Daniel, et al.
(författare)
-
Analysis of a competitive respiratory disease system with quarantine : Epidemic thresholds and cross-immunity effects
- 2025
-
Ingår i: Applied Mathematics and Computation. - : Elsevier. - 0096-3003 .- 1873-5649. ; 485
-
Tidskriftsartikel (refereegranskat)abstract
- Our study investigates the dynamics of disease interaction and persistence within populations, exploring various epidemic scenarios, including backward bifurcation and cross-immunity effects. We establish conditions under which the disease-free equilibrium of the model demonstrates local or global asymptotic stability, contingent on the efficacy of quarantine measures. Notably, we find that a strain with a quarantine reproduction number greater than 1 will out-compete a strain with a quarantine reproduction number less than 1, leading to its extinction under complete immunity conditions. Additionally, we identify scenarios where diseases persist in a sub-critical coexistence endemic equilibrium, despite one control reproduction number being below one. Our exploration of backward bifurcation reveals the model's capacity to accommodate the coexistence of the disease-free equilibrium with up to four endemic equilibria. Moreover, we demonstrate that the existence of cross-immunity enhances the coexistence of two strains. However, co-infections and imperfect quarantine measures pose significant challenges in containing outbreaks, sustaining the outbreak potential even with successful control of individual virus strains. Conversely, controlling outbreaks becomes more manageable in the absence of co-infections, especially with perfect quarantine measures. We conclude by advocating for public health strategies that address the complexities posed by co-infections, emphasizing the importance of simultaneously tackling multiple pathogens.
|
|
| 24. |
- Gambarato, Renira R.
(författare)
-
Introduction - Audience modes : A granular approach
- 2025
-
Ingår i: The Routledge Companion to Media Audiences. - Abingdon : Routledge. - 9781032214665 - 9781032214696 - 9781003268543 ; , s. 205-209
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)
|
|
| 25. |
- Gambarato, Renira R.
(författare)
-
Transmedia (anti-storytelling) audiences
- 2025
-
Ingår i: The Routledge Companion to Media Audiences. - Abingdon : Routledge. - 9781032214665 - 9781032214696 - 9781003268543 ; , s. 210-221
-
Bokkapitel (refereegranskat)
|
|
| 26. |
- Gao, Guangbin, et al.
(författare)
-
Understanding filamentous cyanobacteria and their adaptive niches in Lake Honghu, a shallow eutrophic lake
- 2025
-
Ingår i: Journal of Environmental Sciences (China). - 1001-0742. ; 152, s. 219-234
-
Tidskriftsartikel (refereegranskat)abstract
- Freshwater lakes globally are witnessing an escalation in the frequency and intensity of cyanobacterial harmful blooms. However, underlying factors influencing the succession or coexistence of cyanobacteria, especially filamentous ones, remain poorly understood. Lake Honghu, a Ramsar Wetland of International Importance with degrading aquatic ecological quality, served as a case study to elucidate the intricate relationship between environmental changes and cyanobacterial dynamics. Our analysis revealed a significant increase in the dominance of filamentous cyanobacteria, marked by high spatiotemporal variability in community structure. This dominance of filamentous diazotrophic cyanobacteria is attributed to a decrease in the ratio of dissolved inorganic nitrogen to total phosphorus and their capacity to utilize organic phosphorus in phosphorus-deficient conditions. Species-specific density variations were linked to diverse environmental factors, with total nitrogen or total phosphorus concentration remaining as a crucial factor influencing dominant cyanobacterial density fluctuations. The dominance of low-temperature-tolerant Aphanizomenon and Pseudanabaena was evident in spring and winter, whereas Dolichospermum and Cylindrospermopsis, which prefer higher temperatures, thrived in summer and autumn. Additionally, non-algal turbidity and heterogeneity can potentially alter the competitive outcome among filamentous cyanobacteria or foster coexistence under conditions of elevated temperatures and nutrient limitation. This study predicts that filamentous cyanobacteria may spread and persist in lakes spanning a wide trophic range. Current findings enhance our comprehension of the dynamic responses exhibited by filamentous bloom-forming cyanobacteria in the face of environmental changes within shallow eutrophic lakes and provide valuable insights for lake managers involved in the remediation of degraded shallow lakes.
|
|
| 27. |
- Gordon, Michelle
(författare)
-
Persecution, Oppression and Subjection
- 2025
-
Ingår i: <em>A Cultural History of Violence in the Age of Empire</em>. - London : Bloomsbury Academic.
-
Bokkapitel (refereegranskat)
|
|
| 28. |
- Havinger, Carl-Johan, et al.
(författare)
-
My Digital Mountain - An Autoethnographic Exploration of Off-piste Skiers' Use of Digital Tools
- 2025
-
Ingår i: Proceedings of the Annual Hawaii International Conference on System Sciences (HICSS). - 1530-1605 .- 2572-6862.
-
Konferensbidrag (refereegranskat)abstract
- This paper explores the sociocultural dynamics of off-piste skiers' engagement with digital tools for information-seeking, sharing, and risk management. The study uses autoethnographic narratives and qualitative interview data to understand the digital interactions of off-piste skiers and their influence on decision-making and safety. The findings underscore the extensive use of digital tools, particularly FATMAP, to provide real-time information crucial for navigating the unpredictable terrain and enhancing decision-making processes. This research underscores the significant role of digital representation of the mountain in shaping off-piste skiing practices, cultivating community, and, ultimately, experiences. The findings provide unique insights that help us understand digital tools’ informational use in extreme environments, specifically in the context of off-piste skiing.
|
|
| 29. |
- Hill, Annette
(författare)
-
Introduction – Audience engagement and experiences
- 2025
-
Ingår i: The Routledge Companion to Media Audiences. - Abingdon : Routledge. - 9781032214665 - 9781032214696 - 9781003268543
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)
|
|
| 30. |
- Hill, Annette, et al.
(författare)
-
Introduction to Companion to Media Audiences
- 2025
-
Ingår i: The Routledge Companion to Media Audiences. - Abingdon : Routledge. - 9781032214665 - 9781032214696 - 9781003268543
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)
|
|
| 31. |
- Hill, Annette, et al.
(författare)
-
Slow reality TV and Chinese audiences
- 2025
-
Ingår i: The Routledge Companion to Media Audiences. - Abingdon : Routledge. - 9781032214665 - 9781032214696 - 9781003268543
-
Bokkapitel (refereegranskat)
|
|
| 32. |
- Husain, Waqar, et al.
(författare)
-
Gerascophobia or Excessive Fear of Aging Scale (GEFAS) : Development, validation, and exploration of psychometric properties of a brief instrument using classical testing theory and item response theory
- 2025
-
Ingår i: Archives of gerontology and geriatrics (Print). - : Elsevier. - 0167-4943 .- 1872-6976. ; 128
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Gerascophobia, or excessive fear of aging, is thought to be caused by a mixture of cognitive, experiential, and physiological factors acting on a person at particular time points. Measurement tools for evaluating geraschophobia remain insufficiently developed, despite this commonplace fear's distress.Objective: The objective of the current study was to develop and validate the Gerascophobia or Excessive Fear of Aging Scale (GEFAS) and analyze its psychometric properties.Methods: Three successive investigations were carried out with a total of 1594 participants. Exploratory and confirmatory factor analyses were conducted to evaluate the construct validity of the GEFAS. Convergent and discriminant validity was assessed by examining relationships with measures of depression, anxiety, stress, death anxiety, psychosocial illness, and life satisfaction. Multiple linear regression was used to investigate factors that predict fear of aging.Results: The GEFAS demonstrated high reliability (Cronbach alpha >0.8). Factor analysis supported a single-factor solution for the scale (fitness indices CFI, TLI, NNFI, NFI, RFI, and MFI all > 0.95; RMSEA=0.06. Significant positive correlations were found between fear of aging and depression (r = 0.270; p < 0.01), anxiety (r = 0.311; p < 0.01), stress (r = 0.285; p < 0.01), death anxiety (r = 0.600; p < 0.01), and psychosocial illness (r = 0.243; p < 0.01). A significant inverse correlation was observed with life satisfaction. Gender differences were also noted, with women exhibiting greater fear of aging than men (p < 0.01; d = 0.488).Conclusion: The GEFAS fills a significant gap in the psychological/psychiatric literature as a useful tool for evaluating the fear of aging. The study concludes that the excessive fear of aging contributes to poor mental health.
|
|
| 33. |
|
|
| 34. |
|
|
| 35. |
- Klintman, Mikael
(författare)
-
Framing : The Social Art of Influence
- 2025
-
Bok (refereegranskat)abstract
- From back cover: "A smart, incisive toolkit for understanding how the framing of information influences the way we see the world.In today's chaotic media landscape, working out who and what to believe is a daunting task. Lies and misinformation are only part of the problem - often the way a story is presented has just as much effect on us as what the story is.In Framing, sociologist Mikael Klintman offers a cutting-edge toolkit for exposing and analysing the rhetoric that saturates our everyday lives. Combining insights from the social sciences, economics and evolutionary biology, he lays out a four-part approach to understanding how information is 'framed' for us, built around the key elements of texture, temperature, position and size.Demonstrating this approach through an array of real-world examples, from climate change denial to the subtle messaging of caviar ads, Klintman reveals how canny communicators mislead us without relying on overt deception. At the same time, he probes the deeper evolutionary and cultural roots of our susceptibility to frames."
|
|
| 36. |
- Lindberg, Ylva
(författare)
-
Feminist Comics in Circulation : Pénélope Bagieu's Inscription on the Swedish Comics Landscape
- 2025
-
Ingår i: Comics, Activism, Feminisms. - London : Routledge. - 9781032545509 - 9781032545523 - 9781003425397 ; , s. 126-140
-
Bokkapitel (refereegranskat)abstract
- As feminist comics circulate globally, understanding their transfer from local to international contexts is crucial. Original comics’ local feminism risks erasure in the translation process, favouring elements suiting the target culture. This study examines how Pénélope Bagieu’s comics work is reinscribed in the Swedish comics landscape. Selection and reception instances are analysed drawing on translation and cultural transfer studies. The study traces the selection instance by publishing houses and the reception of Bagieu and French feminist comics in Francophone and Swedish comics scenes. Results show increased recognition of French and Francophone female and feminist comics artists in Sweden after 2010. Incoming female comics artists often get niched in children’s literature, despite potential within the feminist comics landscape. Sweden shows unawareness of the gap between locally promoted feminist comics and the reception of imported equivalents. Selection and reception orchestration crucially impact how a work is received in the target culture. Awareness of incoming feminist comics artists’ works and their connections to works in the target culture can offer nuanced perspectives on cross-border development in the field.
|
|
| 37. |
|
|
| 38. |
- Lu, Fengyi, et al.
(författare)
-
Integrated optimisation of multi-pass cutting parameters and tool path with hierarchical reinforcement learning towards green manufacturing
- 2025
-
Ingår i: Robotics and Computer-Integrated Manufacturing. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0736-5845 .- 1879-2537. ; 91
-
Tidskriftsartikel (refereegranskat)abstract
- Five-axis machining, especially flank milling, is popular in machining thin-walled freeform surface parts with high energy consumption. Reducing the machining energy consumption is paramount for advancing green manufacturing. Therefore, this paper proposes an energy-efficient integration optimisation of cutting parameters and tool path with hierarchical reinforcement learning (HRL). Firstly, a novel multi-pass machining energy consumption model is developed with cutting and path parameters, based on which the integrated optimisation problem is modelled considering a dynamic workpiece deformation constraint. Secondly, HRL with a Soft Actor Critic agent (HSAC) decouples the model into two Markov Decision Processes at different timescales. The higherlayer plans cutting parameters for each pass on a macro timescale, while the micro-timescale lower-layer performs multiple tool path expansions with the planned cutting parameters, and provides feedback to the higher layer. By hierarchical optimisation and non-hierarchical interaction, the model is efficiently solved. Moreover, curriculum transfer learning is applied to expedite task completion of the lower layer, enhancing interaction efficiency between the two layers. Experiments show that, compared with two benchmarks, the proposed method improves machining energy consumption by 35.02 % and 30.92 %, and reduces machining time by 38.57 % and 27.17 %, providing a promising paradigm of green practices for thin-walled freeform parts and the broader manufacturing industry.
|
|
| 39. |
- Lundstedt, Lydia
(författare)
-
Exhaustion
- 2025
-
Ingår i: Elgar Encyclopedia of Intellectual Property Law. - Cheltenham : Edward Elgar Publishing. - 9781800886926 - 9781800886933
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- This entry describes the theoretical and historical underpinnings of the principle of exhaustion in intellectual property law as well as its internationel legal framework.
|
|
| 40. |
|
|
| 41. |
- Nilsson, Henrik, et al.
(författare)
-
Dronar: Obstacle Echolocation Using Drone Ego-Noise
- 2025
-
Ingår i: Proceedings of 2024 IEEE International Conference on Acoustics, Speech, and Signal Processing Workshops (ICASSPW). - 9798350374513 ; , s. 184-188
-
Konferensbidrag (refereegranskat)abstract
- A method for obstacle detection using the sound that a drone naturally emits is proposed. The sound emitted from a vehicle, ego-noise, is often considered a complicating factor for mission fulfilment, without purpose. The idea in this paper is to utilise this ego-noise for obstacle detection, being the first to perform practical experiments of this. Adding a few microphones to the vehicle, the ego-noise is utilised as the sound source for echolocation. The method consists of auto-correlating the received signals to estimate echo delays, using the known array geometry and signal propagation speed to relate delays to distances, and then beamforming to position targets. A proof-of-concept has been constructed, and promising results are presented for experiments in a controlled environment.
|
|
| 42. |
|
|
| 43. |
- Ouchn, Rachid, et al.
(författare)
-
Advancing Sustainable Direct Contact Membrane Distillation : Performance and Stability of Novel Polymer Inclusion Membranes
- 2025
-
Ingår i: Separation and Purification Technology. - 1383-5866. ; 354
-
Tidskriftsartikel (refereegranskat)abstract
- Novel hydrophobic membranes for direct contact membrane distillation (DCMD) were developed using poly(1,1-difluoroethylene) (PVDF) loaded with the ionic liquid methyltrioctylammonium bis(2-ethylhexyl) phosphate (MTOA-DEHP). These polymer inclusion membranes (PIMs) were fabricated via non-solvent induced phase separation (NIPS). Detailed characterization revealed that MTOA-DEHP significantly enhances the morphological and physicochemical properties of the PIMs. Through a series of DCMD experiments, the membrane's flux, salt rejection, and stability under varying conditions, including different feed solutions (i.e., synthetic NaCl solution and real seawater from the Atlantic Ocean), were assessed. Our results demonstrate that the PVDF/20 %MTOA-DEHP membrane exhibits superior performance, maintaining consistent transmembrane flux values (8.98 ± 0.61 kg·m−2·h−1) over multiple cycles and achieving high salt rejection rates (>99.9 %). Furthermore, the membrane demonstrates excellent stability, with minimal degradation observed even after prolonged operation. The results affirm the viability of PIMs as a promising avenue for achieving sustainable and efficient desalination via DCMD, particularly in real-world operational scenarios.
|
|
| 44. |
- Qin, Yiyuan, et al.
(författare)
-
A tool wear monitoring method based on data-driven and physical output
- 2025
-
Ingår i: Robotics and Computer-Integrated Manufacturing. - : Elsevier BV. - 0736-5845 .- 1879-2537. ; 91
-
Tidskriftsartikel (refereegranskat)abstract
- In the process of metal cutting, realizing effective monitoring of tool wear is of great significance to ensure the quality of parts machining. To address the tool wear monitoring (TWM) problem, a tool wear monitoring method based on data-driven and physical output is proposed. The method divides two Physical models (PM) into multiple stages according to the tool wear in real machining scenarios, making the coefficients of PM variable. Meanwhile, by analyzing the monitoring capabilities of different PMs at each stage and fusing them, the PM's ability to deal with complex nonlinear relationships, which is difficult to handle, is improved, and the flexibility of the model is improved; The pre-processed signal data features were extracted, and the original features were fused and downscaled using Stacked Sparse Auto-Encoder (SSAE) networker to build a data-driven model (DDM). At the same time, the DDM is used as a guidance layer to guide the fused PM for the prediction of wear amount at each stage of the tool, which enhances the interpretability of the monitoring model. The experimental results show that the proposed method can realize the accurate monitoring of tool wear, which has a certain reference value for the flexible tool change in the actual metal-cutting process.
|
|
| 45. |
- Sarmad, Shokat, et al.
(författare)
-
Innovative CO2 capture technologies: Exploring the potential of porous liquids containing deep eutectic solvents and hypercrosslinked polymers
- 2025
-
Ingår i: Separation and Purification Technology. - : Elsevier B.V.. - 1383-5866 .- 1873-3794. ; 352
-
Tidskriftsartikel (refereegranskat)abstract
- The current study presented a porous liquid (PL) prepared from propylene glycol-based deep eutectic solvent (DES) and hyper-crosslinked polymers (HCP) that are liquids over wide temperature ranges, including ambient temperature. It was shown that the solvent molecules are too large to penetrate the pores of HCP, so the PL is maintained as a suspension with permanent free volume for several months and can absorb large amounts of gases. This study marks the pioneering use of DESs as the liquid medium, replacing ionic liquids due to their closely matched properties. The structural features of both DES and HCP are retained; the increase in CO2 absorption capacity compared to pure DES is due to the presence of a porous solid and is proportional to the amount of solid. The absorbed CO2 amount rises from 1.0105 mmol·g−1 in pure DES to 1.3232, 1.6027, and 1.2168 mmol·g−1 in PL-1, PL-2, and PL-3, respectively. Thermodynamic analysis revealed that the enthalpy of gas absorption allows straightforward regeneration of the PLs in the studied cases. The investigated PLs show great potential as gas absorbents, with the incorporation of just 0.5 wt% of porous polymer material leading to an impressive increase in solvent absorption capacity, up to 59 %.
|
|
| 46. |
- Smeds, Emilia
(författare)
-
Urban transport experimentation - a network or hybrid governance process?
- 2025
-
Ingår i: Handbook of Transportation and Public Policy. - London : Edward Elgar Publishing.
-
Bokkapitel (refereegranskat)abstract
- Innovative sustainable transport policies are often tested through experiments or pilots. This chapter focuses on how urban transport experimentation is governed, in today’s context where collaboration and partnerships beyond government are often posited as the key to policy innovation. It critically discusses whether experimentation can be understood as a ‘network governance’ process. First, it analyses the claim that the future role of municipal government is to primarily govern by ‘enabling’ activities led by civil society and private actors. Second, it analyses whether voluntary experiment partnerships based on shared normative sustainability goals are particularly effective for co-creating policy innovations. These two propositions are examined against findings from empirical research on 108 sustainable transport experiments implemented in Bristol and New York City between 1996 and 2016. While non-state involvement and network partnerships were in many cases important for realising transformative impacts from experimentation, they were by no means a precondition. Rather than urban transport experimentation being a network governance process per se, we suggest it reflects ‘hybrid governance’ with multiple co-existing governance modes.
|
|
| 47. |
- Sun, Mingyue, et al.
(författare)
-
Out-of-order execution enabled deep reinforcement learning for dynamic additive manufacturing scheduling
- 2025
-
Ingår i: Robotics and Computer-Integrated Manufacturing. - : Elsevier BV. - 0736-5845 .- 1879-2537. ; 91
-
Tidskriftsartikel (refereegranskat)abstract
- Additive Manufacturing (AM) has revolutionized the production landscape by enabling on-demand customized manufacturing. However, the efficient management of dynamic AM orders poses significant challenges for production planning and scheduling. This paper addresses the dynamic scheduling problem considering batch processing, random order arrival and machine eligibility constraints, aiming to minimize total tardiness in a parallel non-identical AM machine environment. To tackle this problem, we propose the out-of-order enabled dueling deep Q network (O3-DDQN) approach. In the proposed approach, the problem is formulated as a Markov decision process (MDP). Three-dimensional features, encompassing dynamic orders, AM machines, and delays, are extracted using a ‘look around’ method to represent the production status at a rescheduling point. Additionally, five novel composite scheduling rules based on the out-of-order principle are introduced for selection when an AM machine completes processing or a new order arrives. Moreover, we design a reward function that is strongly correlated with the objective to evaluate the agent's chosen action. Experimental results demonstrate the superiority of the O3-DDQN approach over single scheduling rules, randomly selected rules, and the classic DQN method. The average improvement rate of performance reaches 13.09% compared to composite scheduling rules and random rules. Additionally, the O3-DDQN outperforms the classic DQN agent with a 6.54% improvement rate. The O3-DDQN algorithm improves scheduling in dynamic AM environments, enhancing productivity and on-time delivery. This research contributes to advancing AM production and offers insights into efficient resource allocation.
|
|
| 48. |
|
|
| 49. |
|
|
| 50. |
-
The Handbook of Fashion Law
- 2025. - 1st
-
Samlingsverk (redaktörskap) (refereegranskat)abstract
- Over the past few years, 'fashion law' has emerged as a vibrant field of inquiry. The legal and policy issues affecting the fashion sector have been investigated with increasing intensity, while a growing number of private practice lawyers and in-house counsel regard themselves as practising fashion law. But what is fashion law? And what are the specific legal challenges facing the fashion sector, as well as related solutions? The Handbook of Fashion Law seeks to answer these questions by bringing together multiple voices, approaches, and jurisdictions.Its contributions are organized into four thematic areas. Part I considers the legal infrastructure or the fashion and luxury industries, addressing issues related to intellectual property (IP) as well as the demands of the circular economy, protection of cultural heritage, and freedom of expression and information. Part II maps the IP dimensions of fashion by reviewing the application of design rights, copyright, trademarks, geographical indications, plant variety rights, and trade secrets. Part III analyses specific contractual issues arising in the fashion sector. It examines the application of principles and rules found in regulatory frameworks, including those governing advertising, competition, consumer, and tax laws. Finally, Part IV dissects and evaluates the role of new and emerging technologies in the fashion sector from a legal perspective. It considers concepts such as ecommerce, 3D printing, counterfeiting, artificial intelligence, non-fungible tokens (NFTs), the metaverse, gaming, and wearable technology.The Handbook of Fashion Law offers readers a multidisciplinary and multijurisdictional understanding of legal challenges facing the fashion sector. Bringing together a diverse range of experts, its contributions offer readers an in-depth, critical, and strategic understanding of the fashion industry's legal intricacies.
|
|
