| 1. |
- Ebrahimi, Mohammadhossein, et al.
(författare)
-
Associations of human femoral condyle cartilage structure and composition with viscoelastic and constituent-specific material properties at different stages of osteoarthritis
- 2022
-
Ingår i: Journal of Biomechanics. - : Elsevier BV. - 0021-9290. ; 145
-
Tidskriftsartikel (refereegranskat)abstract
- The relationships between structure and function in human knee femoral cartilage are not well-known at different stages of osteoarthritis. Thus, our aim was to characterize the depth-dependent composition and structure (proteoglycan content, collagen network organization and collagen content) of normal and osteoarthritic human femoral condyle cartilage (n = 47) and relate them to their viscoelastic and constituent-specific mechanical properties that are obtained through dynamic sinusoidal testing and fibril-reinforced poroelastic material modeling of stress-relaxation testing, respectively. We characterized the proteoglycan content using digital densitometry, collagen network organization (orientation angle and anisotropy) using polarized light microscopy and collagen content using Fourier transform infrared spectroscopy. In the superficial cartilage (0–10 % of thickness), the collagen network disorganization and proteoglycan loss were associated with the smaller initial fibril network modulus - a parameter representing the pretension of the collagen network. Furthermore, the proteoglycan loss was associated with the greater strain-dependent fibril network modulus - a measure of nonlinear mechanical behavior. The proteoglycan loss was also associated with greater cartilage viscosity at a low loading frequency (0.005 Hz), while the collagen network disorganization was associated with greater cartilage viscosity at a high loading frequency (1 Hz). Our results suggest that proteoglycan loss and collagen network disorganization reduce the pretension of the collagen network while proteoglycan degradation also increases the nonlinear mechanical behavior of the collagen network. Further, the results also highlight that proteoglycan loss and collagen disorganization increase the viscosity of femoral cartilage, but their contribution to increased viscosity occurs in completely different loading frequencies.
|
|
| 2. |
- Ebrahimi, Mohammadhossein, et al.
(författare)
-
Elastic, Dynamic Viscoelastic and Model-Derived Fibril-Reinforced Poroelastic Mechanical Properties of Normal and Osteoarthritic Human Femoral Condyle Cartilage
- 2021
-
Ingår i: Annals of Biomedical Engineering. - : Springer Science and Business Media LLC. - 0090-6964 .- 1573-9686. ; 49:9, s. 2622-2634
-
Tidskriftsartikel (refereegranskat)abstract
- Osteoarthritis (OA) degrades articular cartilage and weakens its function. Modern fibril-reinforced poroelastic (FRPE) computational models can distinguish the mechanical properties of main cartilage constituents, namely collagen, proteoglycans, and fluid, thus, they can precisely characterize the complex mechanical behavior of the tissue. However, these properties are not known for human femoral condyle cartilage. Therefore, we aimed to characterize them from human subjects undergoing knee replacement and from deceased donors without known OA. Multi-step stress-relaxation measurements coupled with sample-specific finite element analyses were conducted to obtain the FRPE material properties. Samples were graded using OARSI scoring to determine the severity of histopathological cartilage degradation. The results suggest that alterations in the FRPE properties are not evident in the moderate stages of cartilage degradation (OARSI 2-3) as compared with normal tissue (OARSI 0-1). Drastic deterioration of the FRPE properties was observed in severely degraded cartilage (OARSI 4). We also found that the FRPE properties of femoral condyle cartilage related to the collagen network (initial fibril-network modulus) and proteoglycan matrix (non-fibrillar matrix modulus) were greater compared to tibial and patellar cartilage in OA. These findings may inform cartilage tissue-engineering efforts and help to improve the accuracy of cartilage representations in computational knee joint models.
|
|
| 3. |
- Fick, James, et al.
(författare)
-
In vitro glycation of articular cartilage alters the biomechanical response of chondrocytes in a depth-dependent manner
- 2014
-
Ingår i: Osteoarthritis and Cartilage. - : Elsevier. - 1063-4584 .- 1522-9653. ; 22:10, s. 1410-1418
-
Tidskriftsartikel (refereegranskat)abstract
- OBJECTIVE: To determine if increasing cartilage cross-links through in vitro glycation of cartilage explants can alter the biomechanical response of chondrocytes to compressive deformation.METHOD: Bovine osteochondral explants were either incubated with cell culture solution supplemented with (n = 7) or without (n = 7) ribose for 42 h in order to induce glycation. Deformation-induced changes in cell volume, dimensions and local tissue strains were determined through confocal laser scanning microscopy (CLSM) and the use of a custom built micro-compression device. Osteochondral explants were also utilized to demonstrate changes in depth-wise tissue properties, biomechanical tissue properties and cross-links such as pentosidine (Pent), hydroxylysyl pyridinoline (HP) and lysyl pyridinoline (LP).RESULTS: The ribose treated osteochondral samples experienced reduced cell volume deformation in the upper tissue zone by ∼ 8% (P = 0.005), as compared the control samples, through restricting cell expansion. In the deeper tissue zone, cell volume deformation was increased by ∼ 12% (P < 0.001) via the transmission of mechanical signals further into the tissue depth. Biomechanical testing of the ribose treated osteochondral samples demonstrated an increase in the equilibrium and dynamic strain dependent moduli (P < 0.001 and P = 0.008, respectively). The biochemical analysis revealed an increase in Pent cross-links (P < 0.001). Depth-wise tissue property analyses revealed increased levels of carbohydrate content, greater levels of fixed charge density and an increased carbohydrate to protein ratio from 6 to 16%, 55-100% and 72-79% of the normalized tissue thickness (from the surface), respectively, in the ribose-treated group (P < 0.05).CONCLUSION: In vitro glycation alters the biomechanical response of chondrocytes in cartilage differently in upper and deeper zones, offering possible insights into how aging could alter cell deformation behavior in cartilage.
|
|
| 4. |
- Florea, Cristina, et al.
(författare)
-
A combined experimental atomic force microscopy-based nanoindentation and computational modeling approach to unravel the key contributors to the time-dependent mechanical behavior of single cells
- 2017
-
Ingår i: Biomechanics and Modeling in Mechanobiology. - : Springer Berlin/Heidelberg. - 1617-7959 .- 1617-7940. ; 16:1, s. 297-311
-
Tidskriftsartikel (refereegranskat)abstract
- Cellular responses to mechanical stimuli are influenced by the mechanical properties of cells and the surrounding tissue matrix. Cells exhibit viscoelastic behavior in response to an applied stress. This has been attributed to fluid flow-dependent and flow-independent mechanisms. However, the particular mechanism that controls the local time-dependent behavior of cells is unknown. Here, a combined approach of experimental AFM nanoindentation with computational modeling is proposed, taking into account complex material behavior. Three constitutive models (porohyperelastic, viscohyperelastic, poroviscohyperelastic) in tandem with optimization algorithms were employed to capture the experimental stress relaxation data of chondrocytes at 5 % strain. The poroviscohyperelastic models with and without fluid flow allowed through the cell membrane provided excellent description of the experimental time-dependent cell responses (normalized mean squared error (NMSE) of 0.003 between the model and experiments). The viscohyperelastic model without fluid could not follow the entire experimental data that well (NMSE = 0.005), while the porohyperelastic model could not capture it at all (NMSE = 0.383). We also show by parametric analysis that the fluid flow has a small, but essential effect on the loading phase and short-term cell relaxation response, while the solid viscoelasticity controls the longer-term responses. We suggest that the local time-dependent cell mechanical response is determined by the combined effects of intrinsic viscoelasticity of the cytoskeleton and fluid flow redistribution in the cells, although the contribution of fluid flow is smaller when using a nanosized probe and moderate indentation rate. The present approach provides new insights into viscoelastic responses of chondrocytes, important for further understanding cell mechanobiological mechanisms in health and disease.
|
|
| 5. |
- Florea, Cristina, et al.
(författare)
-
Determination of mechanical properties of chondrocytes in articular cartilage using atomic force microscopy
- 2014
-
Ingår i: Solid State Phenomena. - : Trans Tech Publications Inc.. - 1012-0394 .- 1662-9779. ; 216, s. 134-139
-
Tidskriftsartikel (refereegranskat)abstract
- Atomic Force Microscopy (AFM) based nanoindentation is a widely used technique for measuring mechanical properties of living cells, providing information for understanding their mechanobiological behavior. However, very local properties of cell surfaces have not been characterized earlier. The goal of this study was to develop an AFM-based technique to determine local elastic properties of bovine articular chondrocytes. The Youngs modulus of chondrocytes was 19.3 ± 5.6 kPa for spread cells and 10 ± 4.1 kPa for the round cells. The results were compared to previous studies in which different techniques were used to obtain more global properties of chondrocytes. Our findings suggest that using nanosized AFM tips, the very local cell properties can be measured.
|
|
| 6. |
- Huttu, Mari, et al.
(författare)
-
Effects of medium and temperature on cellular responses in the superficial zone of hypo-osmotically challenged articular cartilage.
- 2012
-
Ingår i: Journal of Functional Biomaterials. - Basel, Switzerland : MDPI AG. - 2079-4983. ; 3:3, s. 544-555
-
Tidskriftsartikel (refereegranskat)abstract
- Osmotic loading of articular cartilage has been used to study cell-tissue interactions and mechanisms in chondrocyte volume regulation in situ. Since cell volume changes are likely to affect cell's mechanotransduction, it is important to understand how environmental factors, such as composition of the immersion medium and temperature affect cell volume changes in situ in osmotically challenged articular cartilage. In this study, chondrocytes were imaged in situ with a confocal laser scanning microscope (CLSM) through cartilage surface before and 3 min and 120 min after a hypo-osmotic challenge. Samples were measured either in phosphate buffered saline (PBS, without glucose and Ca(2+)) or in Dulbecco's modified Eagle's medium (DMEM, with glucose and Ca(2+)), and at 21 °C or at 37 °C. In all groups, cell volumes increased shortly after the hypotonic challenge and then recovered back to the original volumes. At both observation time points, cell volume changes as a result of the osmotic challenge were similar in PBS and DMEM in both temperatures. Our results indicate that the initial chondrocyte swelling and volume recovery as a result of the hypo-osmotic challenge of cartilage are not dependent on commonly used immersion media or temperature.
|
|
| 7. |
- Jahangir, Sana, et al.
(författare)
-
Sensitivity of simulated knee joint mechanics to selected human and bovine fibril-reinforced poroelastic material properties
- 2023
-
Ingår i: Journal of Biomechanics. - 0021-9290. ; 160
-
Tidskriftsartikel (refereegranskat)abstract
- Fibril-reinforced poroviscoelastic material models are considered state-of-the-art in modeling articular cartilage biomechanics. Yet, cartilage material parameters are often based on bovine tissue properties in computational knee joint models, although bovine properties are distinctly different from those of humans. Thus, we aimed to investigate how cartilage mechanical responses are affected in the knee joint model during walking when fibril-reinforced poroviscoelastic properties of cartilage are based on human data instead of bovine. We constructed a finite element knee joint model in which tibial and femoral cartilages were modeled as fibril-reinforced poroviscoelastic material using either human or bovine data. Joint loading was based on subject-specific gait data. The resulting mechanical responses of knee cartilage were compared between the knee joint models with human or bovine fibril-reinforced poroviscoelastic cartilage properties. Furthermore, we conducted a sensitivity analysis to determine which fibril-reinforced poroviscoelastic material parameters have the greatest impact on cartilage mechanical responses in the knee joint during walking. In general, bovine cartilage properties yielded greater maximum principal stresses and fluid pressures (both up to 30%) when compared to the human cartilage properties during the loading response in both femoral and tibial cartilage sites. Cartilage mechanical responses were very sensitive to the collagen fibril-related material parameter variations during walking while they were unresponsive to proteoglycan matrix or fluid flow-related material parameter variations. Taken together, human cartilage material properties should be accounted for when the goal is to compare absolute mechanical responses of knee joint cartilage as bovine material parameters lead to substantially different cartilage mechanical responses.
|
|
| 8. |
- Julkunen, Petro, et al.
(författare)
-
A Review of the Combination of Experimental Measurements and Fibril-Reinforced Modeling for Investigation of Articular Cartilage and Chondrocyte Response to Loading
- 2013
-
Ingår i: Computational & Mathematical Methods in Medicine. - : Hindawi Limited. - 1748-6718 .- 1748-670X.
-
Forskningsöversikt (refereegranskat)abstract
- The function of articular cartilage depends on its structure and composition, sensitively impaired in disease (e. g. osteoarthritis, OA). Responses of chondrocytes to tissue loading are modulated by the structure. Altered cell responses as an effect of OA may regulate cartilage mechanotransduction and cell biosynthesis. To be able to evaluate cell responses and factors affecting the onset and progression of OA, local tissue and cell stresses and strains in cartilage need to be characterized. This is extremely challenging with the presently available experimental techniques and therefore computational modeling is required. Modern models of articular cartilage are inhomogeneous and anisotropic, and they include many aspects of the real tissue structure and composition. In this paper, we provide an overview of the computational applications that have been developed for modeling the mechanics of articular cartilage at the tissue and cellular level. We concentrate on the use of fibril-reinforced models of cartilage. Furthermore, we introduce practical considerations for modeling applications, including also experimental tests that can be combined with the modeling approach. At the end, we discuss the prospects for patient-specific models when aiming to use finite element modeling analysis and evaluation of articular cartilage function, cellular responses, failure points, OA progression, and rehabilitation.
|
|
| 9. |
- Julkunen, Petro, et al.
(författare)
-
Stress-relaxation of human patellar articular cartilage in unconfined compression : prediction of mechanical response by tissue composition and structure.
- 2008
-
Ingår i: Journal of Biomechanics. - : Elsevier. - 0021-9290 .- 1873-2380. ; 41:9, s. 1978-86
-
Tidskriftsartikel (refereegranskat)abstract
- Mechanical properties of articular cartilage are controlled by tissue composition and structure. Cartilage function is sensitively altered during tissue degeneration, in osteoarthritis (OA). However, mechanical properties of the tissue cannot be determined non-invasively. In the present study, we evaluate the feasibility to predict, without mechanical testing, the stress-relaxation response of human articular cartilage under unconfined compression. This is carried out by combining microscopic and biochemical analyses with composition-based mathematical modeling. Cartilage samples from five cadaver patellae were mechanically tested under unconfined compression. Depth-dependent collagen content and fibril orientation, as well as proteoglycan and water content were derived by combining Fourier transform infrared imaging, biochemical analyses and polarized light microscopy. Finite element models were constructed for each sample in unconfined compression geometry. First, composition-based fibril-reinforced poroviscoelastic swelling models, including composition and structure obtained from microscopical and biochemical analyses were fitted to experimental stress-relaxation responses of three samples. Subsequently, optimized values of model constants, as well as compositional and structural parameters were implemented in the models of two additional samples to validate the optimization. Theoretical stress-relaxation curves agreed with the experimental tests (R=0.95-0.99). Using the optimized values of mechanical parameters, as well as composition and structure of additional samples, we were able to predict their mechanical behavior in unconfined compression, without mechanical testing (R=0.98). Our results suggest that specific information on tissue composition and structure might enable assessment of cartilage mechanics without mechanical testing.
|
|
| 10. |
|
|
