| 1. |
|
|
| 2. |
- Asadollahzadeh, Mohammadtaghi, et al.
(författare)
-
Application of Fungal Biomass for the Development of New Polylactic Acid-Based Biocomposites
- 2022
-
Ingår i: Polymers. - : MDPI AG. - 2073-4360. ; 14:9
-
Tidskriftsartikel (refereegranskat)abstract
- Fungal biomass (FB), a by-product of the fermentation processes produced in large volumes, is a promising biomaterial that can be incorporated into poly(lactic acid) (PLA) to develop enhanced biocomposites that fully comply with the biobased circular economy concept. The PLA/FB composites, with the addition of triethyl citrate (TEC) as a biobased plasticizer, were fabricated by a microcompounder at 150 °C followed by injection molding. The effects of FB (10 and 20 wt %) and TEC (5, 10, and 15 wt %) contents on the mechanical, thermal and surface properties of the biocomposites were analyzed by several techniques. The PLA/FB/TEC composites showed a rough surface in their fracture section. A progressive decrease in tensile strength and Young’s modulus was observed with increasing FB and TEC, while elongation at break and impact strength started to increase. The neat PLA and biocomposite containing 10% FB and 15% TEC exhibited the lowest (3.84%) and highest (224%) elongation at break, respectively. For all blends containing FB, the glass transition, crystallization and melting temperatures were shifted toward lower values compared to the neat PLA. The incorporation of FB to PLA thus offers the possibility to overcome one of the main drawbacks of PLA, which is brittleness.
|
|
| 3. |
- Asadollahzadeh, Mohammadtaghi, et al.
(författare)
-
Fungal biotechnology
- 2023
-
Ingår i: Current Developments in Biotechnology and Bioengineering. - : Elsevier. ; , s. 31-66
-
Bokkapitel (refereegranskat)abstract
- Filamentous fungi are an amazing group of microorganisms able to both degrade and produce a plethora of different compounds. Many fungi have rather modest nutritional requirements, making them very interesting for biotechnological applications, with applications in both submerged and solid-state fermentation. Applications include agriculture, food, and feed, pharmaceutical, pulp and paper, textile industries, as well as a potential for waste valorization. Some of the current and potential products include: ethanol, citric acid, gluconic acid, itaconic acid, lactic acid, fumaric acid, and the fungal biomass as a food or feed, as well as more specific compounds such as enzymes.
|
|
| 4. |
- Asadollahzadeh, Mohammadtaghi, et al.
(författare)
-
Using spent sulfite liquor for valuable fungal biomass production by Aspergilus oryzae
- 2017
-
Ingår i: Nordic Pulp & Paper Research Journal. - 0283-2631 .- 2000-0669. ; 32:4, s. 630-638
-
Tidskriftsartikel (refereegranskat)abstract
- The recent and increasing interest in bioconversion of lignocellulosic wastes into value-added products has led to extensive research on various microorganisms and substrates. In this study, filamentous fungus Aspergillus oryzae was cultivated on spent sulfite liquor (SSL) from a pulp mill. The process using an airlift bioreactor (3.5 L working volume) was successfully carried out in 48 h with an airflow of 0.85 vvm (volume air per volume culture per minute) at 35°C and pH 5.5. The cultivation results showed that the fungal biomass concentration was higher in more diluted SSL. The highest and lowest fungal biomass concentrations when spore inoculation was used were 10.2 and 6.5 g/l SSL, in diluted SSL to 60 and 80%, respectively. The range of crude protein and total fat of the fungal biomass was 0.44 – 0.48 and 0.04 – 0.11 g/g biomass dry weight, respectively. All essential amino acids were present in acceptable quantities in the fungal biomass. The results obtained in this study have practical implications in that the fungus A. oryzae could be used successfully to produce fungal biomass protein using spent sulfite liquor for animal feed.
|
|
| 5. |
- Bátori, Veronika, et al.
(författare)
-
Ethanol and Protein from Ethanol Plant By-Products Using Edible Fungi Neurospora intermedia and Aspergillus oryzae
- 2015
-
Ingår i: BioMed Research International. - : Hindawi Limited. - 2314-6133 .- 2314-6141. ; 2015:nov23
-
Tidskriftsartikel (refereegranskat)abstract
- Feasible biorefineries for production of second-generation ethanol are difficult to establish due to the process complexity. An alternative is to partially include the process in the first-generation plants. Whole stillage, a by-product from dry-mill ethanol processes from grains, is mostly composed of undegraded bran and lignocelluloses can be used as a potential substrate for production of ethanol and feed proteins. Ethanol production and the proteins from the stillage were investigated using the edible fungi Neurospora intermedia and Aspergillus oryzae, respectively. N. intermedia produced 4.7 g/L ethanol from the stillage and increased to 8.7 g/L by adding 1 FPU of cellulase/g suspended solids. Saccharomyces cerevisiae produced 0.4 and 5.1 g/L ethanol, respectively. Under a two-stage cultivation with both fungi, up to 7.6 g/L of ethanol and 5.8 g/L of biomass containing 42% (w/w) crude protein were obtained. Both fungi degraded complex substrates including arabinan, glucan, mannan, and xylan where reductions of 91, 73, 38, and 89% (w/v) were achieved, respectively. The inclusion of the current process can lead to the production of 44,000 m(3) of ethanol (22% improvement), around 12,000 tons of protein-rich biomass for animal feed, and energy savings considering a typical facility producing 200,000 m(3) ethanol/year.
|
|
| 6. |
- Bátori, Veronika, 1980-, et al.
(författare)
-
Production of Pectin-Cellulose Biofilms: A New Approach for Citrus Waste Recycling
- 2017
-
Ingår i: International Journal of Polymer Science. - : Hindawi Limited. - 1687-9422 .- 1687-9430. ; 2017, s. 1-9
-
Tidskriftsartikel (refereegranskat)abstract
- While citrus waste is abundantly generated, the disposal methods used today remain unsatisfactory: they can be deleterious for ruminants, can cause soil salinity, or are not economically feasible; yet citrus waste consists of various valuable polymers. This paper introduces a novel environmentally safe approach that utilizes citrus waste polymers as a biobased and biodegradable film, for example, for food packaging. Orange waste has been investigated for biofilm production, using the gelling ability of pectin and the strength of cellulosic fibres. A casting method was used to form a film from the previously washed, dried, and milled orange waste. Two film-drying methods, a laboratory oven and an incubator shaker, were compared. FE-SEM images confirmed a smoother film morphology when the incubator shaker was used for drying. The tensile strength of the films was 31.67 ± 4.21 and 34.76 ± 2.64 MPa, respectively, for the oven-dried and incubator-dried films, which is within the range of different commodity plastics. Additionally, biodegradability of the films was confirmed under anaerobic conditions. Films showed an opaque appearance with yellowish colour.
|
|
| 7. |
- Bátori, Veronika, 1980-, et al.
(författare)
-
Synthesis and characterization of maleic anhydride-grafted orange waste for potential use in biocomposites
- 2018
-
Ingår i: BioResources. - : BioResources. - 1930-2126. ; 13:3, s. 4986-4997
-
Tidskriftsartikel (refereegranskat)abstract
- The purpose of the study was to develop a less hydrophilic, and therefore more useful, material from orange waste produced in large quantities by the food industry. A new derivative of industrial orange waste was synthesized via esterification with maleic anhydride. The reaction was confirmed via Fourier transform infrared spectroscopy (FTIR), and the degree of substitution of the hydroxyl groups was 0.39 ± 0.01, as determined by a back-titration method. A major change in physical structure was confirmed by scanning electron microscopy (SEM). The flake-like structure of orange waste changed to a sponge-like structure after the reaction, which involved an increased volume and a reduced density by approximately 40%. The sponge-like structure was represented as an agglomeration of particles with a low specific surface area of 2.18 m2/g and a mean pore diameter of 10.7 nm. Interestingly, the grafted orange waste seemed to become more hydrophobic, which was confirmed by a contact angle test; however, the material absorbed more water vapor. Thermogravimetric analysis (TGA) confirmed a thermally more uniform, though, less heat-resistant material. This work suggests a possible way of utilizing orange waste via synthesizing a renewable material with possible applications as a filler in biocomposites.
|
|
| 8. |
- Bátori, Veronika, 1980-, et al.
(författare)
-
The effect of glycerol, sugar and maleic anhydride on pectin-cellulose biofilms prepared from orange waste
- 2019
-
Ingår i: Polymers. - : MDPI AG. - 2073-4360.
-
Tidskriftsartikel (refereegranskat)abstract
- This study was conducted to improve the properties of thin films prepared from orange waste by the solution casting method. The main focus was the elimination of holes in the film structure by establishing better cohesion between the major cellulosic and pectin fractions. For this, a previously developed method was improved first by the addition of sugar to promote pectin gelling, then by the addition of maleic anhydride. Principally, maleic anhydride was introduced to the films to induce cross-linking within the film structure. The effects of concentrations of sugar and glycerol as plasticizers and maleic anhydride as a cross-linking agent on the film characteristics were studied. Maleic anhydride improved the structure, resulting in a uniform film, and morphology studies showed better adhesion between components. However, it did not act as a cross-linking agent, but rather as a compatibilizer. The middle level (0.78%) of maleic anhydride content resulted in the highest tensile strength (26.65 ± 3.20 MPa) at low (7%) glycerol and high (14%) sugar levels and the highest elongation (28.48% ± 4.34%) at high sugar and glycerol levels. To achieve a uniform film surface with no holes present, only the lowest (0.39%) level of maleic anhydride was necessary.
|
|
| 9. |
|
|
| 10. |
|
|
