SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Li Jinxia) "

Sökning: WFRF:(Li Jinxia)

  • Resultat 1-10 av 28
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Kristan, Matej, et al. (författare)
  • The first visual object tracking segmentation VOTS2023 challenge results
  • 2023
  • Ingår i: 2023 IEEE/CVF International conference on computer vision workshops (ICCVW). - : Institute of Electrical and Electronics Engineers Inc.. - 9798350307443 - 9798350307450 ; , s. 1788-1810
  • Konferensbidrag (refereegranskat)abstract
    • The Visual Object Tracking Segmentation VOTS2023 challenge is the eleventh annual tracker benchmarking activity of the VOT initiative. This challenge is the first to merge short-term and long-term as well as single-target and multiple-target tracking with segmentation masks as the only target location specification. A new dataset was created; the ground truth has been withheld to prevent overfitting. New performance measures and evaluation protocols have been created along with a new toolkit and an evaluation server. Results of the presented 47 trackers indicate that modern tracking frameworks are well-suited to deal with convergence of short-term and long-term tracking and that multiple and single target tracking can be considered a single problem. A leaderboard, with participating trackers details, the source code, the datasets, and the evaluation kit are publicly available at the challenge website1
  •  
2.
  • Baart, Pieter, et al. (författare)
  • Contaminant particle migration in a double restriction seal
  • 2013
  • Ingår i: Proceedings of the STLE Annual Meeting and Exhibition 2013, Detroit MI, USA.. - : STLE. ; , s. 125-
  • Konferensbidrag (refereegranskat)abstract
    • Microparticle image velocimetry (μPIV) is used to measure the grease velocity profile in small seal-like geometries and the radial migration of contaminant particles is predicted. In the first part, the influence of shaft speed, grease type, and temperatures on the flow of lubricating greases in a narrow double restriction sealing pocket is evaluated. Such geometries can be found in, for example, labyrinth-type seals. In a wide pocket the velocity profile is one-dimensional and the Herschel-Bulkley model is used. In a narrow pocket, it is shown by the experimental results that the side walls have a significant influence on the grease flow, implying that the grease velocity profile is two-dimensional. In this area, a single empirical grease parameter for the rheology is sufficient to describe the velocity profile.In the second part, the radial migration of contaminant particles through the grease is evaluated. Centrifugal forces acting on a solid spherical particle are calculated from the grease velocity profile. Consequently, particles migrate to a larger radius and finally settle when the grease viscosity becomes large due to the low shear rate. This behavior is important for the sealing function of the grease in the pocket and relubrication
  •  
3.
  •  
4.
  • Baart, Pieter, et al. (författare)
  • The influence of speed, grease type, and temperature on radial contaminant particle migration in a double restriction seal
  • 2011
  • Ingår i: Tribology Transactions. - : Informa UK Limited. - 1040-2004 .- 1547-397X. ; 54:6, s. 867-877
  • Tidskriftsartikel (refereegranskat)abstract
    • Microparticle image velocimetry (μPIV) is used to measure the grease velocity profile in small seal-like geometries and the radial migration of contaminant particles is predicted. In the first part, the influence of shaft speed, grease type, and temperatures on the flow of lubricating greases in a narrow double restriction sealing pocket is evaluated. Such geometries can be found in, for example, labyrinth-type seals. In a wide pocket the velocity profile is one-dimensional and the Herschel-Bulkley model is used. In a narrow pocket, it is shown by the experimental results that the side walls have a significant influence on the grease flow, implying that the grease velocity profile is two-dimensional. In this area, a single empirical grease parameter for the rheology is sufficient to describe the velocity profile. In the second part, the radial migration of contaminant particles through the grease is evaluated. Centrifugal forces acting on a solid spherical particle are calculated from the grease velocity profile. Consequently, particles migrate to a larger radius and finally settle when the grease viscosity becomes large due to the low shear rate. This behavior is important for the sealing function of the grease in the pocket and relubrication.
  •  
5.
  • Green, Torbjörn M., et al. (författare)
  • A new method to visualize grease flow in a double restriction seal using microparticle image velocimetry
  • 2011
  • Ingår i: Tribology Transactions. - : Informa UK Limited. - 1040-2004 .- 1547-397X. ; 54, s. 784-792
  • Tidskriftsartikel (refereegranskat)abstract
    • A new method to visualize and quantify grease flow in between two sealing lips or, in general, a double restriction seal is presented. Two setups were designed to mimic different types of seals; that is, a radial and an axial shaft seal. The flow of the grease inside and in between the sealing restrictions was measured using microparticle image velocimetry. The results show that grease flow due to a pressure difference mainly takes place close to the rotating shaft surface with an exponentially decaying velocity profile in the radial direction. Consequently, contaminants may be captured in the stationary grease at the outer radius, which explains the sealing function of the grease.
  •  
6.
  •  
7.
  • Li, Jinxia, et al. (författare)
  • Design of test rig for visualizations of cylindrical shear and pressure driven Couette flow using μPIV
  • 2014
  • Konferensbidrag (refereegranskat)abstract
    • Couette flow is often encountered in concentric cylinder application such as rheometers etc. Being able to visualize such flows is of interest both from a fundamental point of view to understand the dynamics of complex fluids, but also in specific applications such as lubricants flowing through seal geometries. In this study a concentric cylinder test rig has been designed to visualize Couette flow in both radial and axial direction using micro Particle Image Velocimetry. The rig allows for control of the flow motion; the rotating inner cylinder creates a peripheral flow and an applied pressure in the axial direction creates a pressure driven flow. Thus, a single flow direction or a combination of directions can be analyzed. To demonstrate the technique a flow of a non-Newtonian shear thinning fluid in the form of lubricating grease was investigated and discussed. It is found that it is possible to capture the yield behavior of the grease, with regions of fully and partially yielded flow visible. The influence of temperature creep flow is also presented. Grease with both high and low yield stress are measured and compared could be measured and compared in a pocket with variable size. Furthermore, non-homogeneous effects such as shear banding and wall slip can be visualized. The test rig has thus a high potential to investigate the influence of wall material and wettability between fluids and the housing on the flow and wall slip behavior as long as the fluid is optically transparent.
  •  
8.
  • Li, Jinxia, et al. (författare)
  • Experimental study of free surface grease flow subjected to centrifugal forces
  • 2014
  • Konferensbidrag (refereegranskat)abstract
    • In order to improve the understanding of grease flow in various applications such as gears, seals and rolling bearings, the free surface flow of different greases under different running conditions has been investigated. A rotating disc has been used to study grease flow as the grease was subjected to a centrifugal force. The grease flow and mass loss was measured for greases with different rheology on different surfaces and with surface textures. It is shown that the speed at which grease starts to move is mostly determined by grease type and yield stress, while the impact of the surface material and roughness is less pronounced. The mass loss is shown to be influenced both by the rheology of the grease and the surface material
  •  
9.
  • Li, Jinxia, et al. (författare)
  • Grease free surface flow on a rotating plate
  • 2014
  • Konferensbidrag (refereegranskat)abstract
    • In order to improve the understanding of grease flow in various applications such as gears, seals and rolling element bearings, free surface flow of different greases under different running conditions has been investigated. A rotating disc has been used to study grease flow as the grease is subjected to a centrifugal force. The adhesion and mass loss was detected for greases with different rheology on different surfaces and surface textures. It is shown that the speed at which grease starts to move is mostly determined by grease type, yield stress and bleeding properties rather than surface material. Also, the surface adhesion is shown to be influenced both by the rheology of the grease and the surface material.
  •  
10.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-10 av 28

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy