| 1. |
|
|
| 2. |
- Aamodt, K., et al.
(författare)
-
The ALICE experiment at the CERN LHC
- 2008
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 3:S08002
-
Forskningsöversikt (refereegranskat)abstract
- ALICE (A Large Ion Collider Experiment) is a general-purpose, heavy-ion detector at the CERN LHC which focuses on QCD, the strong-interaction sector of the Standard Model. It is designed to address the physics of strongly interacting matter and the quark-gluon plasma at extreme values of energy density and temperature in nucleus-nucleus collisions. Besides running with Pb ions, the physics programme includes collisions with lighter ions, lower energy running and dedicated proton-nucleus runs. ALICE will also take data with proton beams at the top LHC energy to collect reference data for the heavy-ion programme and to address several QCD topics for which ALICE is complementary to the other LHC detectors. The ALICE detector has been built by a collaboration including currently over 1000 physicists and engineers from 105 Institutes in 30 countries, Its overall dimensions are 16 x 16 x 26 m(3) with a total weight of approximately 10 000 t. The experiment consists of 18 different detector systems each with its own specific technology choice and design constraints, driven both by the physics requirements and the experimental conditions expected at LHC. The most stringent design constraint is to cope with the extreme particle multiplicity anticipated in central Pb-Pb collisions. The different subsystems were optimized to provide high-momentum resolution as well as excellent Particle Identification (PID) over a broad range in momentum, up to the highest multiplicities predicted for LHC. This will allow for comprehensive studies of hadrons, electrons, muons, and photons produced in the collision of heavy nuclei. Most detector systems are scheduled to be installed and ready for data taking by mid-2008 when the LHC is scheduled to start operation, with the exception of parts of the Photon Spectrometer (PHOS), Transition Radiation Detector (TRD) and Electro Magnetic Calorimeter (EMCal). These detectors will be completed for the high-luminosity ion run expected in 2010. This paper describes in detail the detector components as installed for the first data taking in the summer of 2008.
|
|
| 3. |
- Munk, P., et al.
(författare)
-
Genomic analysis of sewage from 101 countries reveals global landscape of antimicrobial resistance
- 2022
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 13:1
-
Tidskriftsartikel (refereegranskat)abstract
- Antimicrobial resistance (AMR) is a major threat to global health. Understanding the emergence, evolution, and transmission of individual antibiotic resistance genes (ARGs) is essential to develop sustainable strategies combatting this threat. Here, we use metagenomic sequencing to analyse ARGs in 757 sewage samples from 243 cities in 101 countries, collected from 2016 to 2019. We find regional patterns in resistomes, and these differ between subsets corresponding to drug classes and are partly driven by taxonomic variation. The genetic environments of 49 common ARGs are highly diverse, with most common ARGs carried by multiple distinct genomic contexts globally and sometimes on plasmids. Analysis of flanking sequence revealed ARG-specific patterns of dispersal limitation and global transmission. Our data furthermore suggest certain geographies are more prone to transmission events and should receive additional attention.
|
|
| 4. |
- Ademuyiwa, Adesoji O., et al.
(författare)
-
Determinants of morbidity and mortality following emergency abdominal surgery in children in low-income and middle-income countries
- 2016
-
Ingår i: BMJ Global Health. - : BMJ Publishing Group Ltd. - 2059-7908. ; 1:4
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Child health is a key priority on the global health agenda, yet the provision of essential and emergency surgery in children is patchy in resource-poor regions. This study was aimed to determine the mortality risk for emergency abdominal paediatric surgery in low-income countries globally.Methods: Multicentre, international, prospective, cohort study. Self-selected surgical units performing emergency abdominal surgery submitted prespecified data for consecutive children aged <16 years during a 2-week period between July and December 2014. The United Nation's Human Development Index (HDI) was used to stratify countries. The main outcome measure was 30-day postoperative mortality, analysed by multilevel logistic regression.Results: This study included 1409 patients from 253 centres in 43 countries; 282 children were under 2 years of age. Among them, 265 (18.8%) were from low-HDI, 450 (31.9%) from middle-HDI and 694 (49.3%) from high-HDI countries. The most common operations performed were appendectomy, small bowel resection, pyloromyotomy and correction of intussusception. After adjustment for patient and hospital risk factors, child mortality at 30 days was significantly higher in low-HDI (adjusted OR 7.14 (95% CI 2.52 to 20.23), p<0.001) and middle-HDI (4.42 (1.44 to 13.56), p=0.009) countries compared with high-HDI countries, translating to 40 excess deaths per 1000 procedures performed.Conclusions: Adjusted mortality in children following emergency abdominal surgery may be as high as 7 times greater in low-HDI and middle-HDI countries compared with high-HDI countries. Effective provision of emergency essential surgery should be a key priority for global child health agendas.
|
|
| 5. |
- Raza, Rizwan, et al.
(författare)
-
Composite electrolyte with proton conductivity for low-temperature solid oxide fuel cell
- 2015
-
Ingår i: Applied Physics Letters. - : American Institute of Physics (AIP). - 0003-6951 .- 1077-3118. ; 107:18
-
Tidskriftsartikel (refereegranskat)abstract
- In the present work, cost-effective nanocomposite electrolyte (Ba-SDC) oxide is developed for efficient low-temperature solid oxide fuel cells (LTSOFCs). Analysis has shown that dual phase conduction of O-2 (oxygen ions) and H+ (protons) plays a significant role in the development of advanced LTSOFCs. Comparatively high proton ion conductivity (0.19 s/cm) for LTSOFCs was achieved at low temperature (460°C). In this article, the ionic conduction behaviour of LTSOFCs is explained by carrying out electrochemical impedance spectroscopy measurements. Further, the phase and structure analysis are investigated by X-ray diffraction and scanning electron microscopy techniques. Finally, we achieved an ionic transport number of the composite electrolyte for LTSOFCs as high as 0.95 and energy and power density of 90% and 550 mW/cm2, respectively, after sintering the composite electrolyte at 800°C for 4 h, which is promising. Our current effort toward the development of an efficient, green, low-temperature solid oxide fuel cell with the incorporation of high proton conductivity composite electrolyte may open frontiers in the fields of energy and fuel cell technology.
|
|
| 6. |
- Al-Jobori, S.M., et al.
(författare)
-
Multielement determination in rice, wheat, and barley by instrumental neutron activation analysis
- 1990
-
Ingår i: Biological Trace Element Research. - 0163-4984 .- 1559-0720. ; 26/27, s. 637-645
-
Tidskriftsartikel (refereegranskat)abstract
- INAA has been used for the determination of Na, Mg, Al, Cl, K, Sc, Cr, Mn, Fe, Co, Cu, Zn, As, Se, Br, Rb, Sr, Mo, and W in grains of rice, wheat, and barley, which were collected from different plant fields in Iraq. Samples and standards were irradiated in the IRT-5000 reactor, at neutron fluxes of 2 × 1013 cm−2·s−1 and 3.2 × 1011 cm−2·s−1. Interferences of photopeaks with each other were considered, and reaction interferences were calculated and determined experimentally. Accuracy of our method was assessed by the analysis of IAEA standards Wheat Flour and Bovine liver. A good agreement has been achieved between the present results and recommended values. The precision and detection limit were determined for all elements in all types of grain.
|
|
| 7. |
- Jacquot, A., et al.
(författare)
-
Anisotropy and inhomogeneity measurement of the transport properties of spark plasma sintered thermoelectric materials
- 2013
-
Ingår i: Thermoelectric Materials Research and Device Development for Power Conversion and Refrigeration. - : Materials Research Society. - 9781605114675 ; , s. 89-95
-
Konferensbidrag (refereegranskat)abstract
- We report on the development and capabilities of two new measurement systems developed at Fraunhofer-IPM. The first measurement system is based on an extension of the Van der Pauw method and is suitable for cube-shaped samples. A mapping of the electrical conductivity tensor of a Skutterudite-SPS samples produced at the Instituto de Microelectrónica de Madrid is presented. The second measurement system is a ZTmeter also developed at the Fraunhofer-IPM. It enables the simultaneous measurement of the electrical conductivity, Seebeck coefficient and thermal conductivity up to 900 K of cubes at least 5x5x5 mm 3 in size. The capacity of this measurement system for measuring the anisotropy of the transport properties of a (Bi,Sb)2Te3 SPS sample produced by KTH is demonstrated by simply rotating the samples.
|
|
| 8. |
- Saleemi, Mohsin, et al.
(författare)
-
Fabrication of nanostructured bulk cobalt antimonide (CoSb3) based skutterudites via bottom-up synthesis
- 2013
-
Ingår i: Thermoelectric Materials Research and Device Development for Power Conversion and Refrigeration. - : Materials Research Society. - 9781605114675 ; , s. 121-126
-
Konferensbidrag (refereegranskat)abstract
- Skutterudites are known to be efficient thermoelectric (TE) materials in the temperature range from 600 K to 900 K. Dimensionless figure of merit (ZT) for filled skutterudite TE materials have been reported as ca. 1 at 800 K. Novel nano- engineering approaches and filling of the skutterudites crystal can further improve the transport properties and ultimately the ZT. Although classified among the promising TE materials, research on their large-scale production via bottom up synthetic routes is rather limited. In this work, large quantity of cobalt antimonide (CoSb3) based skutterudites nanopowder (NP) was fabricated through a room temperature coprecipitation precursor method. Dried precipitates were process by thermo-chemical treatment steps including calcination (in air) and reduction (in hydrogen). CoSb3 NPs were then mixed with silver (Ag) nanopanicles at different weight percentages (1%, 5% and 10% by wt) to form nanocomposites. Skutterudite NP was then consolidated by Spark Plasma Sintering (SPS) technique to produce highly dense compacts while maintaining the nanostructure. Temperature dependent TE characteristics of SPS'd CoSb3 and Ag containing nanocomposite samples were evaluated for transport properties, including thermal conductivity, electrical conductivity and Seebeck coefficient over the temperature range of 300-900 K. Physicochemical, structural and microstructural evaluation results are presented in detail.
|
|
| 9. |
- Abbas, Ghazanfar, et al.
(författare)
-
Synthesize and characterization of nanocomposite anodes for low temperature solid oxide fuel cell
- 2015
-
Ingår i: International journal of hydrogen energy. - : Elsevier BV. - 0360-3199 .- 1879-3487. ; 40:1, s. 891-897
-
Tidskriftsartikel (refereegranskat)abstract
- Solid oxide fuel cells have much capability to become an economical alternative energy conversion technology having appropriate materials that can be operated at comparatively low temperature in the range of 400-600 degrees C. The nano-scale engineering has been incorporated to improve the catalytic activity of anode materials for solid oxide fuel cells. Nanostructured Al0.10NixZn0.90-xO oxides were prepared by solid state reaction, which were then mixed with the prepared Gadolinium doped Ceria GDC electrolyte. The crystal structure and surface morphology were characterized by XRD and SEM. The particle size was evaluated by XRD data and found in the range of 20-50 nm, which was then ensured by SEM pictures. The pellets of 13 mm diameter were pressed by dry press technique and electrical conductivities (DC and AC) were determined by four probe techniques and the values have been found to be 10.84 and 4.88 S/cm, respectively at hydrogen atmosphere in the temperature range of 300-600 degrees C. The Electrochemical Impedance Spectroscopy (EIS) analysis exhibits the pure electronic behavior at hydrogen atmosphere. The maximum power density of ANZ-GDC composite anode based solid oxide fuel cell has been achieved 705 mW/cm(2) at 550 degrees C.
|
|
| 10. |
- Jaffari, G. Hassnain, et al.
(författare)
-
Extrinsic contributions to the dielectric response in sintered BaTiO3 nanostructures in paraelectric and ferroelectric regimes
- 2017
-
Ingår i: Physica. B, Condensed matter. - : ELSEVIER SCIENCE BV. - 0921-4526 .- 1873-2135. ; 525, s. 70-77
-
Tidskriftsartikel (refereegranskat)abstract
- Post sintering studies of BaTiO3 (BTO) nanoparticles are presented in detail. Bulk nanostructures were prepared via three different compaction processes, namely, uniaxial cold pressing (UCP), Cold Isostatic Pressing (CIP) and Spark Plasma Sintering (SPS). Effect of compaction technique on microstructures have been investigated and correlated with electrical response for each sample. In addition to the transport properties, temperature and frequency dependent dielectric response of variously sintered samples and bulk counterpart was recorded. Several aspects have been identified that are essential to be taken into account in order to completely understand physical processes. Drastically distinct features were observed in paraelectric (PE) regime well above ferroelectric (FE)-PE transition temperature. These features include intra grain conduction with a reduction in the magnitude of PE to FE peak dielectric constant magnitude. Role of strain, grain boundary conduction associated with observation of Maxwell Wagner relaxation and hopping conduction in dielectric and ferroelectric response have been observed and discussed. Densification with presence of oxygen vacancies, significantly enhances conductivity associated with the hopping of the carriers, in turn deteriorated ferroelectric response.
|
|
