| 21. |
- Fink, Helen, 1978, et al.
(författare)
-
An in vitro study of blood compatibility of vascular grafts made of bacterial cellulose in comparison with conventionally-used graft materials
- 2011
-
Ingår i: Journal of Biomedical Materials Research - Part A. - : Wiley. - 1549-3296 .- 1552-4965. ; 97A:1, s. 52-58
-
Tidskriftsartikel (refereegranskat)abstract
- In this study we analyzed the blood compatibility of bacterial cellulose (BC) as a new biosynthetic material for use as a vascular graft. As reference materials we used expanded polytetrafluoroethylene (ePTFE) and poly(ethylene terephthalate) (PET) vascular grafts. These materials are in clinical use today. Tubes with inner diameters of both 4 (not PET) and 6 mm were tested. Heparin-coated PVC tubes (hepPVC) were used as a negative control. Platelet consumption and thrombin-antithrombin complex (TAT) were used as parameters of coagulation and for complement activation, sC3a and sC5b-9 were used. The investigated parameters were measured after 1-h exposure to freshly drawn human blood supplemented with a low dose of heparin in a Chandler loop system. The results showed that BC exhibits no significant difference in platelet consumption, as compared with PET 16 mm), ePTFE and hepPVC. The PET material consumed more platelets than any of the other materials. The TAT generation for 4 mm tubes was not significantly different between BC and the other materials. For 6 mm tubes, however, differences were observed between hepPVC and PET (p < 0.0001); BC and hepPVC (p = 0.0016); ePTFE and PET (p < 0.0001); BC and ePTFE (p = 0.0029); BC and PET (p = 0.0141). Surprisingly, considering the low platelet consumption, the complement activation parameters (sC3a and sC5b-9) were much higher for BC, as compared with the other materials for both 4 and 6 mm tubes.
|
|
| 22. |
- Ghane, Nazanin, et al.
(författare)
-
Regeneration of the peripheral nerve via multifunctional electrospun scaffolds
- 2021
-
Ingår i: Journal of Biomedical Materials Research. Part A. - : John Wiley & Sons. - 1549-3296 .- 1552-4965. ; 109:4, s. 437-452
-
Forskningsöversikt (refereegranskat)abstract
- Over the last two decades, electrospun scaffolds have proved to be advantageous in the field of nerve tissue regeneration by connecting the cavity among the proximal and distal nerve stumps growth cones and leading to functional recovery after injury. Multifunctional nanofibrous structure of these scaffolds provides enormous potential by combining the advantages of nano‐scale topography, and biological science. In these structures, selecting the appropriate materials, designing an optimized structure, modifying the surface to enhance biological functions and neurotrophic factors loading, and native cell‐like stem cells should be considered as the essential factors. In this systematic review paper, the fabrication methods for the preparation of aligned nanofibrous scaffolds in yarn or conduit architecture are reviewed. Subsequently, the utilized polymeric materials, including natural, synthetic and blend are presented. Finally, their surface modification techniques, as well as, the recent advances and outcomes of the scaffolds, both in vitro and in vivo, are reviewed and discussed.
|
|
| 23. |
- Göransson, Anna, 1970, et al.
(författare)
-
An in vitro comparison of possibly bioactive titanium implant surfaces.
- 2009
-
Ingår i: Journal of Biomedical Materials Research Part A. - : Wiley. - 1552-4965 .- 1549-3296. ; 88:4, s. 1037-1047
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of the study was to compare Ca and P formation (CaP) and subsequent bone cell response of a blasted and four different possibly bioactive commercially pure (cp) titanium surfaces; 1. Fluoride etched (Fluoride), 2. Alkali-heat treated (AH), 3. Magnesium ion incorporated anodized (TiMgO), and 4. Nano HA coated and heat treated (nano HA) in vitro. Furthermore, to evaluate the significance of the SBF formed CaP coat on bone cell response. The surfaces were characterized by Optical Interferometry, Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS). CaP formation was evaluated after 12, 24 and 72 h in simulated body fluid (SBF). Primary human mandibular osteoblast-like cells were cultured on the various surfaces subjected to SBF for 72 h. Cellular attachment, differentiation (osteocalcin) and protein production (TGF-beta(1)) was evaluated after 3 h and 10 days respectively. Despite different morphological appearances, the roughness of the differently modified surfaces was similar. The possibly bioactive surfaces gave rise to an earlier CaP formation than the blasted surface, however, after 72 h the blasted surface demonstrated increased CaP formation compared to the possibly bioactive surfaces. Subsequent bone cell attachment was correlated to neither surface roughness nor the amount of formed CaP after SBF treatment. In contrast, osteocalcin and TGF-beta(1) production were largely correlated to the amount of CaP formed on the surfaces. However, bone response (cell attachment, osteocalcin and TGF-F production) on the blasted controls were similar or increased compared to the SBF treated fluoridated, AH and TiMgO surface. (c) 2008 Wiley Periodicals, Inc. J Biomed Mater Res, 2008.
|
|
| 24. |
- Göransson, Anna, 1970, et al.
(författare)
-
Inflammatory response to titanium surfaces with fibrinogen and catalase coatings: an in vitro study.
- 2007
-
Ingår i: Journal of biomedical materials research. Part A. - : Wiley. - 1549-3296 .- 1552-4965. ; 80:3, s. 693-9
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of the present study was to evaluate the possibility to modulate the early inflammatory response in vitro by coating titanium surfaces with candidate proinflammatory (fibrinogen coated turned titanium "Fib") and antiinflammatory proteins (catalase on top of fibrinogen coated turned titanium "Cat"). Additionally, turned titanium surfaces (Ti) were used as controls. The discs were incubated with human mononuclear cells. Adhered cells were investigated with respect to number, viability, differentiation (acute marker 27E10 vs. chronic marker RM3/1), and cytokine production (TNF-alpha and IL-10), after 24 and 72 h. The results indicated that it is possible to modulate the inflammatory response with protein coatings. However, the strongest inflammatory response, indicated by increased number of adhered cells and release of pro and antiinflammatory mediators, was induced by Cat. Furthermore, the cytokine production on this surface was not sensitive to LPS stimulation. Differentiation measured as the expression of the chronic cell surface marker, dominated after 72 h for all surface modifications and Cat displayed an increased number compared to the others. A decrease in the total number of adhered cells and amounts of TNF-alpha were observed on all surfaces over time. The cell viability was, in general, high for all tested surfaces. In conclusion, the study proved it possible to influence the early inflammatory response in vitro by immobilizing protein coatings to titanium surfaces. However, the catalase surface demonstrated the strongest inflammatory response, and the possibility to selectively use the potent antiinflammatory capacity of catalase needs to be further evaluated.
|
|
| 25. |
- Han, Yilin, et al.
(författare)
-
Effect of scaffold properties on adhesion and maintenance of boundary cap neural crest stem cells in vitro
- 2020
-
Ingår i: Journal of Biomedical Materials Research. Part A. - : Wiley. - 1549-3296 .- 1552-4965. ; 108:6, s. 1274-1280
-
Tidskriftsartikel (refereegranskat)abstract
- Optimal combination of stem cells and biocompatible support material is a promising strategy for successful tissue engineering. The required differentiation of stem cells is crucial for functionality of engineered tissues and can be regulated by chemical and physical cues. Here we examined how boundary cap neural crest stem cells (bNCSCs) are affected when cultured in the same medium, but on collagen- or laminin-polyacrylamide (PAA) scaffolds of different stiffness (0.5, 1, or similar to 7 kPa). bNCSCs displayed marked differences in their ability to attach, maintain a large cell population and differentiate, depending on scaffold stiffness. These findings show that the design of physical cues is an important parameter to achieve optimal stem cell properties for tissue repair and engineering.
|
|
| 26. |
- Helenius, Gisela, 1973, et al.
(författare)
-
In vivo biocompatibility of bacterial cellulose
- 2006
-
Ingår i: Journal of biomedical materials research. - : Wiley. - 1549-3296 .- 1552-4965. ; 76:2, s. 431-8
-
Tidskriftsartikel (refereegranskat)abstract
- The biocompatibility of a scaffold for tissue engineered constructs is essential for the outcome. Bacterial cellulose (BC) consists of completely pure cellulose nanofibrils synthesized by Acetobacter xylinum. BC has high mechanical strength and can be shaped into three-dimensional structures. Cellulose-based materials induce negligible foreign body and inflammatory responses and are considered as biocompatible. The in vivo biocompatibility of BC has never been evaluated systematically. Thus, in the development of tissue engineered constructs with a BC scaffold, it is necessary to evaluate the in vivo biocompatibility. BC was implanted subcutaneously in rats for 1, 4, and 12 weeks. The implants were evaluated in aspects of chronic inflammation, foreign body responses, cell ingrowth, and angiogenesis, using histology, immunohistochemistry, and electron microscopy. There were no macroscopic signs of inflammation around the implants. There were no microscopic signs of inflammation either (i.e., a high number of small cells around the implants or the blood vessels). No fibrotic capsule or giant cells were present. Fibroblasts infiltrated BC, which was well integrated into the host tissue, and did not elicit any chronic inflammatory reactions. The biocompatibility of BC is good and the material has potential to be used as a scaffold in tissue engineering.
|
|
| 27. |
- Hoess, Andreas, et al.
(författare)
-
Self-supporting nanoporous alumina membranes as substrates for hepatic cell cultures
- 2012
-
Ingår i: Journal of Biomedical Materials Research. Part A. - : Wiley. - 1549-3296 .- 1552-4965. ; 100A:9, s. 2230-2238
-
Tidskriftsartikel (refereegranskat)abstract
- Membranes made from nanoporous alumina exhibit interesting properties for their use in biomedical research. They show high porosity and the pore diameters can be easily adjusted in a reproducible manner. Nanoporous alumina membranes are thus ideal substrates for the cultivation of polar cells (e.g., hepatocytes) or the establishment of indirect co-cultures. The porous nature of the material allows supply of nutrients to both sides of adherent cells and the exchange of molecules across the membrane. However, it is well-known that surface features in the nanometer range affect cellular behavior. In this study, the response of HepG2 cells to nanoporous alumina membranes with three different pore diameters, ranging from 50 to 250 nm, has been evaluated. The cellular interactions with the nanoporous materials were assessed by investigating cell adhesion, morphology, and proliferation. Cell functionality was measured by means of albumin production. The membranes supported good cell adhesion and spreading. Compared to tissue culture plastic, the cells on the porous substrates developed distinct focal adhesion sites and actin stress fibers. Additionally, electron microscopical investigations revealed the penetration of cellular extensions into pores with diameters bigger than 200 nm. Furthermore, cell proliferation significantly increased with an increase in pore diameter, whereas the albumin production followed a reverse trend. Thus, it seems to be possible to direct cellular behavior of HepG2 cells growing on nanoporous alumina by changing the pore diameter of the material. Hence, nanoporous alumina membranes can be useful culture substrates to develop new approaches in the field of liver tissue engineering.
|
|
| 28. |
- Hulsart-Billström, Gry, et al.
(författare)
-
Osteogenic potential of Sr-doped calcium phosphate hollow spheres in vitro and in vivo
- 2013
-
Ingår i: Journal of Biomedical Materials Research. Part A. - : Wiley. - 1549-3296 .- 1552-4965. ; 101:8, s. 2322-2331
-
Tidskriftsartikel (refereegranskat)abstract
- Treatment of osteoporotic fractures with conventional surgical methods is associated with a high rate of complications. Intense search for new treatment options includes development of specific biomaterials aimed to be part of the surgical armamentarium. Strontium doped calcium phosphate spheres (SrCPS) is a new material that might be of interest due to the influence on osteoclast and osteoblast activity. In the present study, we successfully constructed hollow spherical SrCPS particles with a diameter of ∼700 nm and shell thickness of ∼150 nm. The Sr content was about 20 wt %. Cell viability and cytotoxicity were investigated in vitro with concentrations from 0 to 1000 μg/mL of SrCPS in medium extract in a day chase study. The in vivo biocompatibility was tested in a delayed bone-healing model in a rat vertebral defect by histology, μCT, and nanoSPECT. The SrCPS showed no toxicity in vitro with comparable cell number in all concentrations. Increased metabolism was seen in the cell viability study in cells exposed to 400 and 600 μg/mL. SPECT showed good biocompatibility with no local adverse effects and an increased osteoblast activity as compared to adjacent vertebra. SrCPS implantation induced bone formation and resulted in complete resorption and defect consolidation.
|
|
| 29. |
- Ichioka, Yuki, et al.
(författare)
-
Epigenetic changes of osteoblasts in response to titanium surface characteristics.
- 2021
-
Ingår i: Journal of biomedical materials research. Part A. - : Wiley. - 1552-4965 .- 1549-3296. ; 109:2, s. 170-180
-
Tidskriftsartikel (refereegranskat)abstract
- We aimed to investigate the influence of titanium surface characteristics on epigenetic mechanisms and DNA damage/repair pathways. Osteoblast-like cells (MG63) were incubated on glass, smooth titanium, and minimally rough titanium discs, respectively, for 0, 1, 6, and 24hr. The presence of double-stranded DNA damage (γH2AX), DNA repair (Chk2), and epigenetic markers (AcH3 & DNMT1) were investigated using immunofluorescence. There were no Chk2-positive cells on the minimally rough titanium surfaces at all-time points, in comparison to glass and smooth titanium. Total γH2AX-positive cells on minimally rough titanium gradually decreased as incubation time increased, on the contrary to smooth titanium. Minimally rough titanium surfaces induced cytoplasmic staining of DNMT1 up to 99% at 24hr. For epigenetic markers related to the DNA damage/repair pathway, minimally rough titanium surfaces showed the lower percentage of AcH3-positive cells compared to glass and smooth titanium surface. The findings in the current study show that titanium surface characteristics indeed influence DNA damage and the DNA repair pathway, including epigenetic factors.
|
|
| 30. |
- Idris, Shaza Bushra, et al.
(författare)
-
Polyester copolymer scaffolds enhance expression of bone markers in osteoblast-like cells
- 2010
-
Ingår i: J BIOMED MATER RES PART A. - : Wiley. - 1549-3296. ; 94A:2, s. 631-639
-
Tidskriftsartikel (refereegranskat)abstract
- In tissue engineering, the resorbable aliphatic polyester poly(L-lactide) (PLLA) is used as scaffolds in bone regeneration. Copolymers of poly(L-lactide)-co-(epsilon-caprolactone) [poly(LLA-co-CL)] and poly(L-lactide)-co-(1,5-dioxepan-2-one) [poly(LLA-co-DXO)], with superior mechanical properties to PLLA, have been developed to be used as scaffolds, but the influence on the osteogenic potential is unclear. This in vitro study of test scaffolds of poly(LLA-co-CL) and poly(LLA-co-DXO) using PLLA scaffolds as a control demonstrates the attachment and proliferation of human osteoblast-like cells (HOB) as measured by SEM and a methylthiazol tetrazolium (MTT) colorimetric assay, and the progression of HOB osteogenesis for up to 3 weeks; expressed as synthesis of the osteoblast differentiation markers: collagen type 1 (Col 1), alkaline phosphatase, bone sialoprotein, osteocalcin (OC), osteopontin and runt related gene 2 (Runx2). Surface analysis disclosed excellent surface attachment, spread and penetration of the cells into the pores of the test scaffolds compared to the PLLA. MTT results indicated that test scaffolds enhanced the proliferation of HOBs. Cells grown on the test scaffolds demonstrated higher synthesis of Col 1 and OC and also increased bone markers mRNA expression. Compared to scaffolds of PLLA, the poly(LLA-co-CL) and poly(LLA-co-DXO) scaffolds enhanced attachment, proliferation, and expression of osteogenic markers by HOBs in vitro. Therefore, these scaffolds might be appropriate carriers for bone engineering. (C) 2010 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 94A: 631-639, 2010
|
|
