| 61. |
- Sahlin, Herman, et al.
(författare)
-
Anti-inflammatory properties of micropatterned titanium coatings
- 2006
-
Ingår i: Journal of Biomedical Materials Research. Part A. - : Wiley. - 1552-4965 .- 1549-3296. ; 77A:1, s. 43-49
-
Tidskriftsartikel (refereegranskat)abstract
- Prolonged inflammation and reactive oxygen species (ROS) generated around an implanted biosensor are the primary causes of the foreign body response, including encapsulation of biosensor membranes. We have previously demonstrated that TiO2 surfaces reduce ROS. Here we investigated the potential of using the anti-inflammatory properties of TiO2 in the design of biosensor membranes with improved long-term in vivo transport properties. Micropatterned Ti films were sputtered onto quartz surfaces in a series of hexagonally distributed dots with identical coverage area of 23% and dot size ranging from 5 to 100 microm. The antioxidant effect of the surfaces was investigated using a cell-free peroxynitrite donor assay and assays of superoxide released from stimulated surface-adhering neutrophils and macrophages. In all three assays, the amount of ROS was monitored using luminol-amplified chemiluminescence. Patterned surfaces in all experimental models significantly decreased ROS compared to the etched surfaces. In the cell-free experiment, the ROS reduction was only dependent on fractional surface coverage. In the cell experiments, however, a dot-size-dependent ROS reduction was seen, with the largest reduction at the smallest dot-size surfaces. These results indicate that micropatterned surfaces with small dots covering only 23% of the surface area exhibit similar antioxidative effect as fully covered surfaces.
|
|
| 62. |
- Sandberg, Tomas, et al.
(författare)
-
Potential use of mucins as biomaterial coatings. I. Fractionation, characterization, and model adsorption of bovine, porcine, and human mucins
- 2009
-
Ingår i: Journal of Biomedical Materials Research Part A. - : Wiley. - 1549-3296 .- 1552-4965. ; 91A:3, s. 762-772
-
Tidskriftsartikel (refereegranskat)abstract
- Previously, we presented evidence that mucins have potential as biomaterial coatings. Here, we reveal substantial batch-to-batch variations for a frequently used commercial bovine salivary mucin preparation (BSM) and stress the importance of standardizing mucins intended for comparative purposes. "Mild" fractionation strategies, aiming at preserving natural mucin functions, were used to prepare two more defined BSM fractions as well as three mucin fractions from porcine gastric (PGM) and human salivary (MG1) sources. While the BSM and PGM were highly purified and mainly adopted random coil conformations in solution, the MG1 contained mucin-bound components (1.6 wt% albumin) and appeared compact. Average molar masses and root-mean-square radii for the predominant BSM, PGM, and MG1 species spanned 0.8-4.2 MDa and 46-86 nm, respectively. An ellipsometric evaluation, using hydrophilic and hydrophobic silica, showed the mucin adsorption to be slow and related to mucin charge, size, conformation, and compositional complexity. The mass uptakes on hydrophobic silica averaged 2.6, 2.6, and 5.0 mg/m(2), for BSM, PGM, and MG1, respectively. Finally, we find that stable mucin coatings can be formed on polymers of different wettability. The reported mucin preparations serve as platforms for a series of studies on the biocompatibility of mucin coatings.
|
|
| 63. |
- Sandberg, Tomas, et al.
(författare)
-
Potential use of mucins as biomaterial coatings. II. Mucin coatings affect the conformation and neutrophil-activating properties of adsorbed host proteins – Towards a mucosal mimic
- 2009
-
Ingår i: Journal of Biomedical Materials Research: Part A. - : Wiley. - 1549-3296 .- 1552-4965. ; 91A:3, s. 773-785
-
Tidskriftsartikel (refereegranskat)abstract
- In continuation of our recent fractionation and characterization study on mucins of bovine salivary (BSM), porcine gastric (PGM), and human salivary (MG1) origin, this study evaluates the effect of mucin precoating on the conformation and neutrophil-activating properties of host proteins adsorbed to a polyethylene terephthalate-based model biomaterial. Microscopy combined with assays for the neutrophil releases of reactive oxygen species and human neutrophil lipocalin showed that mucin precoating greatly reduced the strong immune-response normally induced by adsorbed immunoglobulin G (IgG) and secretory immunoglobulin A (sIgA), respectively. A similar finding was made for the proinflammatory fibrinogen. Although the total uptakes of these proteins depended on the mucin surface concentration, a detailed composite analysis suggested the fraction Of surface-exposed protein to be a stronger determinant of coating performance. The unexpectedly low neutrophil activation showed by composites containing near-monolayer concentrations of exposed IgG and sIgA, respectively, suggested that these act synergistically with mucin on the surface. In support of this hypothesis, quartz crystal microbalance with dissipation monitoring measurements revealed that a preadsorbed BSM layer stabilizes IgG through complexation on a polymeric model surface. Our findings link well to the complex in vivo situation and suggest that functional mucosal mimics can be created in situ for improved biomaterials performance.
|
|
| 64. |
- Sandvig, Ioanna, et al.
(författare)
-
RGD-peptide modified alginate by a chemoenzymatic strategy for tissue engineering applications
- 2015
-
Ingår i: Journal of Biomedical Materials Research. Part A. - : Wiley. - 1549-3296 .- 1552-4965. ; 103:3, s. 896-906
-
Tidskriftsartikel (refereegranskat)abstract
- One of the main challenges in tissue engineering and regenerative medicine is the ability to maintain optimal cell function and survival post-transplantation. Biomaterials such as alginates are commonly used for immunoisolation, while they may also provide structural support to the cell transplants by mimicking the extracellular matrix. In this study, arginine-glycine-aspartate (RGD)-peptide-coupled alginates of tailored composition were produced by adopting a unique chemoenzymatic strategy for substituting the nongelling mannuronic acid on the alginate. Alginates with and without RGD were produced with high and low content of G. Using carbodiimide chemistry 0.1-0.2% of the sugar units were substituted by peptide. Furthermore, the characterization by H-1-nuclear magnetic resonance (NMR) revealed by-products from the coupling reaction that partly could be removed by coal filtration. Olfactory ensheathing cells (OECs) and myoblasts were grown in two-dimensional (2D) and 3D cultures of RGD-peptide modified or unmodified alginates obtained by the chemoenzymatically strategy and compared to native alginate. Both OECs and myoblasts adhered to the RGD-peptide modified alginates in 2D cultures, forming bipolar protrusions. OEC encapsulation resulted in cell survival for up to 9 days, thus demonstrating the potential for short-term 3D culture. Myoblasts showed long-term survival in 3D cultures, that is, up to 41 days post encapsulation. The RGD modifications did not result in marked changes in cell viability in 3D cultures. We demonstrate herein a unique technique for tailoring peptide substituted alginates with a precise and flexible composition, conserving the gel forming properties relevant for the use of alginate in tissue engineering. (c) 2014 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 103A: 896-906, 2015.
|
|
| 65. |
- Schwartz Filho, Humberto Osvaldo, et al.
(författare)
-
Titanium surfaces with nanotopography modulate cytokine production in cultured human gingival fibroblasts
- 2012
-
Ingår i: Journal of Biomedical Materials Research. Part A. - : John Wiley & Sons. - 1549-3296 .- 1552-4965. ; 100:10, s. 2629-2636
-
Tidskriftsartikel (refereegranskat)abstract
- Implant topography is an important factor that influences many cell types. To understand the role of topography in the inflammatory events, we evaluated the response of human gingival fibroblasts (HGFs) by the release pattern of cytokines. HGFs were cultured on Ti discs for 24 and 48 h. Four different surface treatments were used: machining method (turned), blasting followed by an acid-etching method (BAE), oxidative nanopatterning (ON) method, and an association of blasting followed by an acid-etching plus oxidative nanopatterning (BAE+ON) method. Extracellular levels of IL-6, IL-8, transforming growth factor beta (TGF-β), IL-4, and IL-10 were measured by enzyme-linked immunosorbant assay. Increased levels of IL-6 and IL-8 were observed in all surfaces after 24 h which decreased after 48 h. BAE, ON, and BAE+ON surfaces showed a reduction in IL-6 levels compared with the turned after 48 h (p < 0.05). On one hand, IL-8 production was lower in BAE+ON in comparison to the turned surface (p < 0.05). On the other hand, IL-4 showed increased levels with 48 h, which were significantly different between turned, BAE, and ON surfaces, but not with BAE+ON. Additionally, TGF-β and IL-10 production were not detected. This study indicates that nanotopography might be important in the modulation of the inflammatory response in cultured HGFs.
|
|
| 66. |
- Shah, Furqan A., et al.
(författare)
-
Influence of cell culture medium composition on in vitro dissolution behaviour of a fluoride-containing bioactive glass
- 2014
-
Ingår i: Journal of Biomedical Materials Research. Part A. - : Wiley. - 1549-3296 .- 1552-4965. ; 102:3, s. 647-654
-
Tidskriftsartikel (refereegranskat)abstract
- SUMMARY: Bioactive glasses are used clinically for bone regeneration, and their bioactivity and cell compatibility are often characterised in vitro, using physiologically relevant test solutions. The aim of this study was to show the influence of varying medium characteristics (pH, composition, presence of proteins) on glass dissolution and apatite formation. The dissolution behaviour of a fluoride-containing bioactive glass was investigated over a period of one week in Eagle's Minimal Essential Medium with Earle's Salts (MEM), supplemented with either, (a) acetate buffer, (b) 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) buffer, (c) HEPES + carbonate or (d) HEPES + carbonate + foetal bovine serum. Results show pronounced differences in pH, ion release and apatite formation over 1 week: Despite its acidic pH (pH 5.8 after bioactive glass immersion, compared to pH 7.4 to 8.3 for HEPES-containing media), apatite formation was fastest in acetate buffered (HEPES-free) MEM. Presence of carbonate resulted in formation of calcite (calcium carbonate). Presence of serum proteins, on the other hand, delayed apatite formation significantly. These results confirm that the composition and properties of a tissue culture medium are important factors during in vitro experiments and need to be taken into consideration when interpreting results from dissolution or cell culture studies.
|
|
| 67. |
- Shah, Furqan A., et al.
(författare)
-
Multiscale characterization of cortical bone composition, microstructure, and nanomechanical properties in experimentally induced osteoporosis
- 2018
-
Ingår i: Journal of Biomedical Materials Research. Part A. - : Wiley. - 1549-3296 .- 1552-4965. ; 106:4, s. 997-1007
-
Tidskriftsartikel (refereegranskat)abstract
- Cortical bone plays a vital role in determining overall bone strength. We investigate the structural, compositional, and nanomechanical properties of cortical bone following ovariectomy (OVX) of 12-week-old Sprague Dawley rats, since this animal model is frequently employed to evaluate the performance of implantable biomaterials in compromised bone healing conditions. Morphological parameters and material properties of bone in the geometrical center of the femoral cortex were investigated four and eight weeks post-OVX and in unoperated controls (Ctrl), using X-ray micro-computed tomography, backscattered electron scanning electron microscopy, Raman spectroscopy, and nanoindentation. The OVX animals showed increase in body weight, diminished bone mineral density, increased intracortical porosity, but increased bone mass through periosteal apposition (e.g., increases in periosteal perimeter, cortical cross-sectional thickness, and cross-sectional area). However, osteocyte densities, osteocyte lacunar dimensions, and the nanomechanical behavior on the single mineralized collagen fibril level remained unaffected. Our correlative multiscale investigation provides structural, chemical, and nanomechanical evidence substantiating earlier reports suggesting that rats ovariectomized at 12 weeks undergo simultaneous bone loss and growth, resulting in the effects of OVX being less obvious. Periosteal apposition contradicts the conventional view of bone loss in osteoporosis but appears advantageous for the greater functional demand imposed on the skeleton by increased body weight and fragility induced by increased intracortical porosity. Through a variety of morphological changes, it is likely that 12-week-old rats are able to adapt to OVX-related microstructural and compositional alterations.
|
|
| 68. |
- Shah, Furqan A., et al.
(författare)
-
Osseointegration of 3D printed microalloyed CoCr implants—Addition of 0.04% Zr to CoCr does not alter bone material properties
- 2018
-
Ingår i: Journal of Biomedical Materials Research - Part A. - : Wiley. - 1549-3296 .- 1552-4965. ; 106:6, s. 1655-1663
-
Tidskriftsartikel (refereegranskat)abstract
- © 2018 Wiley Periodicals, Inc. Electron beam melting (EBM) is a three-dimensional (3D) printing technique for the production of metal structures where complex geometries with interconnected porosities can be built. Incorporation of as little as 0.04% Zr into the CoCr alloy can significantly improve the biomechanical anchorage of constructs fabricated by EBM. Here we investigate bone material properties, including microstructure and composition, adjacent to 3D printed CoCr implants with and without addition of 0.04% Zr, after 8 weeks of healing in the rabbit femur. In low amounts, zirconium addition does not alter the microstructure and extracellular matrix composition of bone formed adjacent to the surface of EBM manufactured implants. Bone ingrowth into surface irregularities of 3D printed CoCr and CoCr + Zr implants is seen. Extensive remodeling is also evident. Osteocytes attach directly on to the implant surface. The interfacial tissue at CoCr and CoCr + Zr has similar mineral crystallinity, apatite-to-collagen ratio, carbonate-to-phosphate ratio, Ca/P ratio, bone-implant contact, percentage porosity, and osteocyte density (N.Ot/B.Ar). Compared to the native bone, the mineral crystallinity of the interfacial tissue was lower while N.Ot/B.Ar was higher for both CoCr and CoCr + Zr. Overall, the results indicate that bone tissue adjacent to CoCr and CoCr + Zr implants is highly mature and exhibits comparable healing kinetics. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1655–1663, 2018.
|
|
| 69. |
- Shah, Furqan A., et al.
(författare)
-
Ultrastructural evaluation of shrinkage artefacts induced by fixatives and embedding resins on osteocyte processes and pericellular space dimensions
- 2015
-
Ingår i: Journal of Biomedical Materials Research. Part A. - : Wiley. - 1549-3296 .- 1552-4965. ; 103:4, s. 1565-76
-
Tidskriftsartikel (refereegranskat)abstract
- The integrity of the interface between the osteocyte (Ot) process and the canalicular wall was investigated in terms of change in the lateral dimensions of the Ot process in relation to the canalicular width, i.e., widening of the pericellular space. This has been interpreted as shrinkage of the Ot process relative to the canalicular wall during sample preparation stages of fixation, dehydration, and resin embedding. Sprague-Dawley rat tibial cross-sections were prepared for transmission electron microscopy (TEM). Four different fixative preparations: paraformaldehyde (PF), modified Karnovsky's (MK), glutaraldehyde (GRR) with ruthenium red (GRR), and zinc formalin (ZF); and two different embedding resins: LR Gold (LRG) and Epon812 (Epon) were evaluated. It was found that for LRG embedding, formalin-only fixatives (PF and ZF) induced lower shrinkage than GRR-containing fixatives (MK and GRR). In contrast, for Epon embedding, MK showed the highest shrinkage, while no differences were found between the remaining fixatives (PF, ZF, and GRR). All formalin-containing fixatives (MK, PF, and ZF) induced similar shrinkage in both embedding media. The most dramatic difference was for GRR fixation, which in combination with LRG embedding showed ∼62% more shrinkage than with Epon embedding, suggesting that the combination of GRR fixation and LRG embedding synergistically amplifies Ot shrinkage. These differences likely suggest a role of the resin in secondarily influencing the tissue structure following fixation. Further, the work confirms LRG as a poor embedding medium for bone specimens, as it causes large variations in shrinkage depending on fixation. © 2014 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2014.
|
|
| 70. |
- Shakya, Akhilesh Kumar, et al.
(författare)
-
Polymeric cryogels are biocompatible, and their biodegradation is independent of oxidative radicals
- 2014
-
Ingår i: Journal of Biomedical Materials Research. Part A. - Hoboken, NJ : John Wiley & Sons. - 1549-3296 .- 1552-4965. ; 102:10, s. 3409-3418
-
Tidskriftsartikel (refereegranskat)abstract
- Biocompatibility and in vivo degradation are two important characteristics of cell scaffolds. We evaluated these properties for four different polymeric macroporous cryogels, polyvinylcaprolactam, polyvinyl alcohol-alginate-bioactive glass composite, polyhydroxyethylmethacrylate-gelatin (pHEMA-gelatin), and chitosan-agarose-gelatin in mice. All the cryogels were synthesized at subzero temperature and were implanted subcutaneously in C57Bl/10.Q inbred mice. Both local and systemic toxicities were negligible as determined by serum tumor necrosis factor α analysis and histology of surrounding tissues nearby the implants. Complete integration of cryogels into the surrounding tissues with neovascular formation was evident in all the mice. At the implantation site, massive infiltration of macrophages and few dendritic cells were observed but neutrophils and mast cells were clearly absent. Macrophage infiltrations were observed even inside the pores of cryogel implants. To ascertain whether oxidative radicals are involved in the cryogel degradation, we implanted these gels in mice deficient for reactive oxygen species (ROS) production. Rapid gel degradation was observed in the absence of ROS, and there was no significant difference in the biodegradation of these cryogels between ROS sufficient and deficient mice thereby excluding any major role for ROS in this process. Thus, we demonstrate the biocompatibility and ROS-independent biodegradable properties of cryogels that could be useful for tissue-specific tissue engineering applications. © 2013 Wiley Periodicals, Inc.
|
|
