| 31. |
- Gruvberger, Birgitta, et al.
(författare)
-
Patch testing with methyldibromo glutaronitrile, a multicentre study within the EECDRG
- 2005
-
Ingår i: Contact Dermatitis. - : Wiley. - 0105-1873 .- 1600-0536. ; 52:1, s. 14-18
-
Tidskriftsartikel (refereegranskat)abstract
- Contact allergy to and allergic contact dermatitis from methyldibromo glutaronitrile (MDBGN) have frequently been reported. As there has been no agreement on which MDBGN test preparation to use, a study was initiated to help determine the optimal patch test preparation for MDBGN. 2661 consecutively patch tested patients at 11 test clinics representing 9 European countries participated. Petrolatum preparations with MDBGN at 1.0%, 0.5%, 0.3% and 0.1% were inserted in the standard series. Contact allergy rates were noted in the range 4.4-1.1% following decreasing test concentrations. Reactions not fulfilling all criteria to be classified as allergic reactions could represent either weak allergic or irritant reactions, and such reactions were noted in the range 8.2-0.5% with decreasing concentrations. A significant number of these reactions represented weak allergic reactions, as allergic reactions were obtained to higher patch test concentrations in the same individual. Morphologically irritant reactions were noted only for the highest test concentrations. In summary, the contact allergy rates and frequencies of doubtful and irritant reactions vary with the patch test concentration. The final decision on patch test concentration for MDBGN should not only rely on these factors but also include information on patch test concentrations required to diagnose individual cases with allergic contact dermatitis from MDBGN as well as results of repeated open application tests.
|
|
| 32. |
|
|
| 33. |
- Guimaraes, K. S. D., et al.
(författare)
-
Lactiplantibacillus plantarum WJL administration during pregnancy and lactation improves lipid profile, insulin sensitivity and gut microbiota diversity in dyslipidemic dams and protects male offspring against cardiovascular dysfunction in later life
- 2020
-
Ingår i: Food & Function. - : Royal Society of Chemistry (RSC). - 2042-6496 .- 2042-650X. ; 11:10, s. 8939-8950
-
Tidskriftsartikel (refereegranskat)abstract
- Background and aim: Maternal dyslipidemia is recognized as a risk factor for the development of arterial hypertension (AH) and cardiovascular dysfunction in offspring. Here we evaluated the effects of probiotic administration of a specific strain of Lactiplantibacillus plantarum(WJL) during pregnancy and lactation on gut microbiota and metabolic profile in dams fed with a high-fat and high-cholesterol (HFHC) diet and its long-term effects on the cardiovascular function in male rat offspring.Methods and results: Pregnant Wistar rats were allocated into three groups: dams fed a control diet (CTL = 5), dams fed a HFHC diet (DLP = 5) and dams fed a HFHC diet and receivingL. plantarum WJL during pregnancy and lactation (DLP-Lp(WJL)).L. plantarum WJL (1 x 10(9)CFU) or vehicle (NaCl, 0.9%) was administered daily by oral gavage for 6 weeks, covering the pregnancy and lactation periods. After weaning, male offspring received a standard diet up to 90 days of life. Biochemical measurements and gut microbiota were evaluated in dams. In male offspring, blood pressure (BP), heart rate (HR) and vascular reactivity were evaluated at 90 days of age. Dams fed with a HFHC diet during pregnancy and lactation had increased lipid profile and insulin resistance and showed dysbiotic gut microbiota. Administration of L. plantarum WJL to dams having maternal dyslipidemia improved gut microbiota composition, lipid profile and insulin resistance in them. Blood pressure was augmented and vascular reactivity was impaired with a higher contractile response and a lower response to endothelium-dependent vasorelaxation in DLP male offspring. In contrast, male offspring of DLP-Lp(WJL) dams had reduced blood pressure and recovered vascular function in later life.Conclusion: Administration ofL. plantarum WJL during pregnancy and lactation in dams improved gut microbiota diversity, reduced maternal dyslipidemia and prevented cardiovascular dysfunction in male rat offspring.
|
|
| 34. |
- Kirschbaum, Miko U.F., et al.
(författare)
-
Is tree planting an effective strategy for climate change mitigation?
- 2024
-
Ingår i: Science of the Total Environment. - : Elsevier B.V.. - 0048-9697 .- 1879-1026. ; 909
-
Tidskriftsartikel (refereegranskat)abstract
- The world's forests store large amounts of carbon (C), and growing forests can reduce atmospheric CO2 by storing C in their biomass. This has provided the impetus for world-wide tree planting initiatives to offset fossil-fuel emissions. However, forests interact with their environment in complex and multifaceted ways that must be considered for a balanced assessment of the value of planting trees. First, one needs to consider the potential reversibility of C sequestration in trees through either harvesting or tree death from natural factors. If carbon storage is only temporary, future temperatures will actually be higher than without tree plantings, but cumulative warming will be reduced, contributing both positively and negatively to future climate-change impacts. Alternatively, forests could be used for bioenergy or wood products to replace fossil-fuel use which would obviate the need to consider the possible reversibility of any benefits. Forests also affect the Earth's energy balance through either absorbing or reflecting incoming solar radiation. As forests generally absorb more incoming radiation than bare ground or grasslands, this constitutes an important warming effect that substantially reduces the benefit of C storage, especially in snow-covered regions. Forests also affect other local ecosystem services, such as conserving biodiversity, modifying water and nutrient cycles, and preventing erosion that could be either beneficial or harmful depending on specific circumstances. Considering all these factors, tree plantings may be beneficial or detrimental for mitigating climate-change impacts, but the range of possibilities makes generalisations difficult. Their net benefit depends on many factors that differ between specific circumstances. One can, therefore, neither uncritically endorse tree planting everywhere, nor condemn it as counter-productive. Our aim is to provide key information to enable appropriate assessments to be made under specific circumstances. We conclude our discussion by providing a step-by-step guide for assessing the merit of tree plantings under specific circumstances.
|
|
| 35. |
- Moritz, J., et al.
(författare)
-
Functional integration approaches via laser powder bed processing
- 2019
-
Ingår i: Journal of laser applications. - : Laser Institute of America. - 1042-346X .- 1938-1387. ; 31:2
-
Tidskriftsartikel (refereegranskat)abstract
- Additive manufacturing design rules are different from those of conventional fabrication techniques. These allow geometries that would not be possible to achieve otherwise. One example of application is the integration of functional parts as part of the manufacturing process. Conceivable applications range from mechanical functions like integration of moving parts or thermodynamic functions, for example, cooling channels or incorporation of electric circuits for electrical functionalization [J. Glasschroeder, E. Prager, and M. F. Zaeh, Rapid Prototyping J. 21, 207–215 (2015)]. Nevertheless, the potential of functional integration using powder-bed processes is far from being exhausted. The present approach addresses the generation of inner cavities and internal structures of titanium-based parts or components by the use of selective laser melting. This paper focusses on the investigation of voids and cavities regarding their capabilities to add new functions to the material. To this end, comprehensive characterization is performed using destructive as well as nondestructive testing methods. These include 3D scanning, computed tomography, and surface roughness measurements as well as microscopic analysis. Voids and cavities were filled with different thermoplastic materials, followed by the qualitative assessment of the mold filling and resulting material properties. Finally, applications are derived and evaluated with respect to the field of lightweight design or damping structures.
|
|
| 36. |
- Novaes, Renan M. L., et al.
(författare)
-
Estimating 20-year land-use change and derived CO2 emissions associated with crops, pasture and forestry in Brazil and each of its 27 states
- 2017
-
Ingår i: Global Change Biology. - : WILEY. - 1354-1013 .- 1365-2486. ; 23:9, s. 3716-3728
-
Tidskriftsartikel (refereegranskat)abstract
- Land-use change (LUC) in Brazil has important implications on global climate change, ecosystem services and biodiversity, and agricultural expansion plays a critical role in this process. Concerns over these issues have led to the need for estimating the magnitude and impacts associated with that, which are increasingly reported in the environmental assessment of products. Currently, there is an extensive debate on which methods are more appropriate for estimating LUC and related emissions and regionalized estimates are lacking for Brazil, which is a world leader in agricultural production (e.g. food, fibres and bioenergy). We developed a method for estimating scenarios of past 20-year LUC and derived CO2 emission rates associated with 64 crops, pasture and forestry in Brazil as whole and in each of its 27 states, based on time-series statistics and in accordance with most used carbon-footprinting standards. The scenarios adopted provide a range between minimum and maximum rates of CO2 emissions from LUC according to different possibilities of land-use transitions, which can have large impacts in the results. Specificities of Brazil, like multiple cropping and highly heterogeneous carbon stocks, are also addressed. The highest CO2 emission rates are observed in the Amazon biome states and crops with the highest rates are those that have undergone expansion in this region. Some states and crops showing large agricultural areas have low emissions associated, especially in southern and eastern Brazil. Native carbon stocks and time of agricultural expansion are the most decisive factors to the patterns of emissions. Some implications on LUC estimation methods and standards and on agri-environmental policies are discussed.
|
|
| 37. |
- Pishgar-Komleh, S. H., et al.
(författare)
-
Integration of life cycle assessment, artificial neural networks, and metaheuristic optimization algorithms for optimization of tomato-based cropping systems in Iran
- 2020
-
Ingår i: The International Journal of Life Cycle Assessment. - : Springer Science and Business Media LLC. - 0948-3349 .- 1614-7502.
-
Tidskriftsartikel (refereegranskat)abstract
- PurposeThe main purpose of this study was to evaluate the use of an integrated life cycle assessment (LCA), artificial neural network, and metaheuristic optimization model to improve the sustainability of tomato-based cropping systems in Iran. The model outputs the combination of input usage in a tomato cropping system, which leads to the highest economic output and the least environmental impact.MethodsThe LCA inventory was created using data from 114 open-field tomato farms in the Alborz Province of Iran during one growing period in 2015. Among all management components, the main focus was on irrigation management systems. The optimization problem was designed by integrating three indicators: carbon footprint (CF), benefit-cost ratio (BCR), and energy use efficiency (EUE) as the objective of field tomato production. The functional unit was 1 kg of tomato aligned with the system boundary of the cradle to market life cycle. Three artificial neural networks (ANNs) were applied to model relationships between the inputs and three indices (CF, BCR, and EUE) as the objective functions. Multi-objective genetic algorithm (MOGA) and multi-objective particle swarm optimization (MOPSO) were used to minimize the CF and maximize the BCR and EUE indicators. The abovementioned aims have been pursued by developing codes in MATLAB software.Results and discussionCF, BCR, and EUE were calculated to be 0.26 kg CO2−eq (kg tomato)−1, 1.8, and 0.5, respectively. MOGA results envisage the possibility of an increase of 86% and 50% in the EUE and BCR and a 43% reduction in the CF of tomato production systems. Moreover, EUE and BCR increased by 83% and 49%, and CF was reduced by 39% from the optimum results obtained from the MOPSO algorithm. It was revealed that in order to optimize field tomato production with the target objectives of this study, a large additional use for irrigation pipes, plastic, and machinery in comparison to current situation is required, while a large reduction of biocide, chemical fertilizer, and electricity consumption is indispensable.ConclusionsAccording to the results of our study, it was concluded that the optimal solutions require a modernization of irrigation systems and a decrease in the consumption of chemical fertilizers and pesticides. The implementation of management options for such solutions is discussed.
|
|
| 38. |
|
|
| 39. |
- Thomassen, Mads, et al.
(författare)
-
Clinical, splicing, and functional analysis to classify BRCA2 exon 3 variants : Application of a points-based ACMG/AMP approach
- 2022
-
Ingår i: Human Mutation. - : Hindawi Limited. - 1059-7794 .- 1098-1004. ; 43:12, s. 1921-1944
-
Tidskriftsartikel (refereegranskat)abstract
- Skipping of BRCA2 exon 3 (∆E3) is a naturally occurring splicing event, complicating clinical classification of variants that may alter ∆E3 expression. This study used multiple evidence types to assess pathogenicity of 85 variants in/near BRCA2 exon 3. Bioinformatically predicted spliceogenic variants underwent mRNA splicing analysis using minigenes and/or patient samples. ∆E3 was measured using quantitative analysis. A mouse embryonic stem cell (mESC) based assay was used to determine the impact of 18 variants on mRNA splicing and protein function. For each variant, population frequency, bioinformatic predictions, clinical data, and existing mRNA splicing and functional results were collated. Variant class was assigned using a gene-specific adaptation of ACMG/AMP guidelines, following a recently proposed points-based system. mRNA and mESC analysis combined identified six variants with transcript and/or functional profiles interpreted as loss of function. Cryptic splice site use for acceptor site variants generated a transcript encoding a shorter protein that retains activity. Overall, 69/85 (81%) variants were classified using the points-based approach. Our analysis shows the value of applying gene-specific ACMG/AMP guidelines using a points-based approach and highlights the consideration of cryptic splice site usage to appropriately assign PVS1 code strength.
|
|
| 40. |
- Turcato, A. C., et al.
(författare)
-
Introducing a cloud based architecture for the distributed analysis of Real-Time Ethernet traffic
- 2020
-
Ingår i: Proceedings. - : Institute of Electrical and Electronics Engineers Inc.. - 9781728148922 ; , s. 235-240
-
Konferensbidrag (refereegranskat)abstract
- The use of industrial communication protocols based on Real-Time Ethernet (RTE) standards is completely replacing traditional industrial fieldbuses. As usual, when a technology becomes mature, the need of efficient diagnostic and maintenance tools quickly raises. Very often, following the paradigm of Industry 4.0, the most effective diagnostic systems are today based on distributed, cloud-centric, architectures and artificial intelligence. However, the distributed analysis of RTE systems is challenging, considering the plurality of protocols and the stringent cost constrains which are common in industry. In this paper, a new architecture for the distributed analysis of RTE networks is proposed, leveraging on distributed probes that send traffic samples to Matlab cloud for remote analysis. The paper also proposes a software conversion tool to adapt general PCAP files captured by popular sniffers (e.g. Wireshark) into MAT file for easier Matlab elaboration. Last, a test bench for characterization (in terms of transfer delays) of the first part of the chain for RTE traffic sampling is described. The results show that in less than 10 seconds it is possible to transfer chunks of RTE traffic data (captured on industrial networks with hundreds of real-time devices) directly to the cloud and to have them converted in Matlab format. © 2020 IEEE.
|
|
