SwePub
Tyck till om SwePub Sök här!
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Dzysiuk N.) "

Sökning: WFRF:(Dzysiuk N.)

  • Resultat 31-40 av 110
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
31.
  • Catarino, N., et al. (författare)
  • Assessment of erosion, deposition and fuel retention in the JET-ILW divertor from ion beam analysis data
  • 2017
  • Ingår i: Nuclear Materials and Energy. - : ELSEVIER. - 2352-1791. ; 12, s. 559-563
  • Tidskriftsartikel (refereegranskat)abstract
    • Post-mortem analyses of individual components provide relevant information on plasma-surface interactions like tungsten erosion, beryllium deposition and plasma fuel retention with divertor tiles via implantation or co-deposition. Ion Beam techniques are ideal tools for such purposes and have been extensively used for post-mortem analyses of selected tiles from JET following each campaign. In this contribution results from tiles removed from the JET ITER-Like Wall (JET-ILW) divertor following the 2013-2014 campaign are presented. The results summarize erosion, deposition and fuel retention along the poloidal cross section of the divertor surface and provide data for comparison with the first JET-ILW campaign, showing a similar pattern of material migration with the exception of Tile 6 where the strike point time on the tile was similar to 4 times longer in 2013-2014 than in 2011-2012, which is likely to account for more material migration to this region. The W deposition on top of the Mo marker coating of Tile 4 shows that the enrichment takes place at the strike point location. (C) 2016 The Authors. Published by Elsevier Ltd.
  •  
32.
  • Frassinetti, Lorenzo, et al. (författare)
  • Dimensionless scalings of confinement, heat transport and pedestal stability in JET-ILW and comparison with JET-C
  • 2017
  • Ingår i: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 0741-3335 .- 1361-6587. ; 59:1
  • Tidskriftsartikel (refereegranskat)abstract
    • Three dimensionless scans in the normalized Larmor radius rho*, normalized collisionality nu* and normalized plasma pressure beta have been performed in JET with the ITER-like wall (JET-ILW). The normalized energy confinement and the thermal diffusivity exhibit a scaling with rho* consistent with the earlier results obtained in the carbon wall JET (JET-C) and with a gyro-Bohm scaling. In the pedestal, experimental results show that the stability is not dependent on rho*, qualitatively in agreement with the peeling-ballooning (P-B) model. The nu* dimensionless scaling shows that JET-ILW normalized confinement has a stronger dependence on collisionality than JET-C. This leads to a reduction of the difference in the confinement between JET-ILW and JET-C to approximate to 10% at low nu*. The pedestal stability shows an improvement with decreasing nu*. This is ascribed to the increase of the bootstrap current, to the reduction of the pedestal width and to the reduction of the relative shift between pedestal density and temperature position. The beta dimensionless scan shows that, at low collisionality, JET-ILW normalized confinement has no clear dependence with beta, in agreement with part of the earlier scalings. At high collisionality, a reduction of the normalized confinement with increasing beta is observed. This behaviour is driven mainly by the pedestal where the stability is reduced with increasing beta. The P-B analysis shows that the stability reduction with increasing beta at high nu* is due to the destabilizing effect of the increased relative shift.
  •  
33.
  • Heinola, K., et al. (författare)
  • Long-term fuel retention in JET ITER-like wall
  • 2016
  • Ingår i: Physica Scripta. - : Institute of Physics Publishing (IOPP). - 0031-8949 .- 1402-4896. ; T167
  • Tidskriftsartikel (refereegranskat)abstract
    • Post-mortem studies with ion beam analysis, thermal desorption, and secondary ion mass spectrometry have been applied for investigating the long-term fuel retention in the JET ITERlike wall components. The retention takes place via implantation and co-deposition, and the highest retention values were found to correlate with the thickness of the deposited impurity layers. From the total amount of retained D fuel over half was detected in the divertor region. The majority of the retained D is on the top surface of the inner divertor, whereas the least retention was measured in the main chamber on the mid-plane of the inner wall limiter. The recessed areas of the inner wall showed significant contribution to the main chamber total retention. Thermal desorption spectroscopy analysis revealed the energetic T from DD reactions being implanted in the divertor. The total T inventory was assessed to be >0.3 mg.
  •  
34.
  • Masuzakil, S., et al. (författare)
  • Analyses of microstructure, composition and retention of hydrogen isotopes in divertor tiles of JET with the ITER-like wall
  • 2017
  • Ingår i: Physica Scripta. - : IOP PUBLISHING LTD. - 0031-8949 .- 1402-4896. ; T170
  • Tidskriftsartikel (refereegranskat)abstract
    • Results of the comprehensive surface analyses of divertor tiles and dusts retrieved from JET after the first ITER-like wall campaign (2011-2012) are presented. The samples cored from the divertor tiles were analyzed. Numerous nano-size bubble-like structures were observed in the deposition layer on the apron of the inner divertor tile, and a beryllium dust with the same structures were found in the matter collected from the inner divertor after the campaign. This suggests that the nano-size bubble-like structures can make the deposition layer to become brittle and may lead to cracking followed by dust generation. X-ray photoelectron spectroscopy analyses of chemical states of species in the deposition layers identified the formation of beryllium-tungsten intermetallic compounds on an inner vertical tile. Different tritium retention profiles along the divertor tiles were observed at the top surfaces and at deeper regions of the tiles by using the imaging plate technique.
  •  
35.
  •  
36.
  • Oya, Yasuhisa, et al. (författare)
  • Correlation of surface chemical states with hydrogen isotope retention in divertor tiles of JET with ITER-Like Wall
  • 2018
  • Ingår i: Fusion engineering and design. - : ELSEVIER SCIENCE SA. - 0920-3796 .- 1873-7196. ; 132, s. 24-28
  • Tidskriftsartikel (refereegranskat)abstract
    • To understand the fuel retention mechanism correlation of surface chemical states and hydrogen isotope retention behavior determined by XPS (X-ray photoelectron spectroscopy) and TDS (Thermal desorption spectroscopy), respectively, for JET ITER-Like Wall samples from operational period 2011-2012 were investigated. It was found that the deposition layer was formed on the upper part of the inner vertical divertor area. At the inner plasma strike point region, the original surface materials, W or Mo, were found, indicating to an erosion-dominated region, but deposition of impurities was also found. Higher heat load would induce the formation of metal carbide. At the outer horizontal divertor tile, mixed material layer was formed with iron as an impurity. TDS showed the H and D desorption behavior and the major D desorption temperature for the upper part of the inner vertical tile was located at 370 degrees C and 530 degrees C. At the strike point region, the D desorption temperature was clearly shifted toward higher release temperatures, indicating the stabilization of D trapping by higher heat load
  •  
37.
  • Rubel, Marek, et al. (författare)
  • Dust generation in tokamaks : Overview of beryllium and tungsten dust characterisation in JET with the ITER-like wall
  • 2018
  • Ingår i: Fusion engineering and design. - : Elsevier. - 0920-3796 .- 1873-7196. ; 136, s. 579-586
  • Tidskriftsartikel (refereegranskat)abstract
    • Operation of the JET tokamak with beryllium and tungsten ITER-like wall provides unique opportunity for detailed studies on dust generation: quantity, morphology, location, etc. The programme carried out in response to ITER needs for safety assessment comprises: (i) remotely controlled vacuum cleaning of the divertor; (ii) local sampling of loosely bound matter from plasma-facing components (PFC); (iii) collection of mobilized dust on various erosion-deposition probes located in the divertor and in the main chamber. Results of comprehensive analyses performed by a number of complementary techniques, e.g. a range of microscopy methods, electron and ion spectroscopy, liquid scintillography and thermal desorption, are summarized by following points: (a) Total amount of dust collected by vacuum cleaning after three campaigns is about 1-1.4 g per campaign (19.1-23.5 h plasma operation), i.e. over 100 times smaller than in JET operated with carbon walls (i.e. in JET-C). (b) Two major categories of Be dust are identified: flakes of co-deposits formed on PFC and droplets (2-10 mu m in diameter). Small quantifies, below 1 g, of Be droplets and splashes are associated mainly with melting of beryllium limiters.
  •  
38.
  • Tarrío, Diego, et al. (författare)
  • Fission Fragment Angular Distribution of Th-232(n,f) at the CERN n_TOF Facility
  • 2014
  • Ingår i: Nuclear Data Sheets. - Univ Santiago de Compostela, Santiago De Compostela, Spain. [Leong, L. S.; Audouin, L.; Tassan-Got, L.; Lederer, C.] IPN, CNRS, IN2P3, Orsay, France. [Altstadt, S.; Langer, C.; Lederer, C.; Reifarth, R.; Schmidt, S.; Weigand, M.] Goethe Univ Frankfurt, D-60054 Frankfurt, Germany. [Andrzejewski, J.; Marganiec, J.; Perkowski, J.] Univ Lodz, PL-90131 Lodz, Poland. [Barbagallo, M.; Colonna, N.; Mastromarco, M.; Meaze, M.; Tagliente, G.; Variale, V.] Ist Nazl Fis Nucl, I-70126 Bari, Italy. [Becares, V.; Cano-Ott, D.; Garcia, A. R.; Gonzalez-Romero, E.; Martinez, T.; Mendoza, E.] CIEMAT, E-28040 Madrid, Spain. [Becvar, F.; Krticka, M.; Kroll, J.; Valenta, S.] Charles Univ Prague, Prague, Czech Republic. [Belloni, F.; Berthoumieux, E.; Bosnar, D.; Chiaveri, E.; Fraval, K.; Gunsing, F.] CEA Saclay, Irfu, F-91191 Gif Sur Yvette, France. [Berthoumieux, E.; Boccone, V.; Bosnar, D.; Brugger, M.; Calviani, M.; Cerutti, F.; Chiaveri, E.; Chin, M.; Ferrari, A.; Guerrero, C.; Kadi, Y.; Losito, R.; Roman, F.; Rubbia, C.; Tsinganis, A.; Versaci, R.; Vlachoudis, V.] CERN, European Org Nucl Res, CH-1211 Geneva, Switzerland. [Billowes, J.; Ware, T.; Wright, T. J.] Univ Manchester, Manchester, Lancs, England. [Zugec, P.] Univ Zagreb, Fac Sci, Dept Phys, Zagreb 41000, Croatia. [Calvino, F.; Cortes, G.; Gomez-Hornillos, M. B.; Riego, A.] Univ Politecn Cataluna, Barcelona, Spain. [Carrapico, C.; Goncalves, I. F.; Sarmento, R.; Vaz, P.] Univ Tecn Lisboa, Inst Super Tecn, Inst Tecnol Nucl, P-1096 Lisbon, Portugal. [Cortes-Giraldo, M. A.; Praena, J.; Quesada, J. M.] Univ Seville, Seville, Spain. [Diakaki, M.; Karadimos, D.; Kokkoris, M.; Vlastou, R.] Natl Tech Univ Athens, GR-10682 Athens, Greece. [Domingo-Pardo, C.; Giubrone, G.; Tain, J. L.] Univ Valencia, CSIC, Inst Fis Corpuscular, E-46003 Valencia, Spain. [Dzysiuk, N.; Mastinu, P. F.] Ist Nazl Fis Nucl, Lab Nazl Legnaro, Milan, Italy. [Eleftheriadis, C.; Manousos, A.] Aristotle Univ Thessaloniki, GR-54006 Thessaloniki, Greece. [Ganesan, S.; Gurusamy, P.] Bhabha Atom Res Ctr, Bombay 400085, Maharashtra, India. [Griesmayer, E.; Jericha, E.; Leeb, H.; Weiss, C.] Vienna Univ Technol, Inst Atom, Vienna, Austria. [Jenkins, D. G.; Vermeulen, M. J.] Univ York, York YO10 5DD, N Yorkshire, England. [Kaeppeler, F.] Karlsruhe Inst Technol, Inst Kernphys, D-76021 Karlsruhe, Germany. [Koehler, P.] Oak Ridge Natl Lab, Oak Ridge, TN 37831 USA. [Lederer, C.; Pavlik, A.; Wallner, A.] Univ Vienna, Fac Phys, A-1010 Vienna, Austria. [Massimi, C.; Mingrone, F.; Vannini, G.] Univ Bologna, Dipartimento Fis, I-40126 Bologna, Italy. [Massimi, C.; Mingrone, F.; Vannini, G.] Sez INFN Bologna, Bologna, Italy. [Mengoni, A.; Ventura, A.] Agenzia Nazl Nuove Tecnol, Eenergia & Sviluppo Econ Sostenibile ENEA, Bologna, Italy. [Milazzo, P. M.] Ist Nazl Fis Nucl, Trieste, Italy. [Mirea, M.; Roman, F.] Horia Hulubei Natl Inst Phys & Nucl Engn, IFIN HH, Bucharest, Romania. [Mondalaers, W.; Plompen, A.; Schillebeeckx, P.] European Commiss JRC, Inst Reference Mat & Measurements, B-2440 Geel, Belgium. [Rauscher, T.] Univ Basel, Dept Phys & Astron, Basel, Switzerland. [Rubbia, C.] Ist Nazl Fis Nucl, Lab Nazl Gran Sasso, Assergi, AQ, Italy. : Elsevier BV. - 0090-3752 .- 1095-9904. ; 119, s. 35-37
  • Tidskriftsartikel (refereegranskat)abstract
    • The angular distribution of fragments emitted in neutron-induced fission of Th-232 was measured in the white spectrum neutron beam at the n_TOF facility at CERN. A reaction chamber based on Parallel Plate Avalanche Counters (PPAC) was used, where the detectors and the targets have been tilted 45 degrees with respect to the neutron beam direction in order to cover the full angular range of the fission fragments. A GEANT4 simulation has been developed to study the setup efficiency. The data analysis and the preliminary results obtained for the Th-232(n,f) between fission threshold and 100 MeV are presented here.
  •  
39.
  • Tarrío, Diego, et al. (författare)
  • Measurement of the angular distribution of fission fragments using a PPAC assembly at CERN n_TOF
  • 2014
  • Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 743, s. 79-85
  • Tidskriftsartikel (refereegranskat)abstract
    • A fission reaction chamber based on Parallel Plate Avalanche Counters (PPACs) was built for measuring angular distributions of fragments emitted in neutron-induced fission of actinides at the neutron beam available at the Neutron Time-Of-Flight (n_TOF) facility at CERN. The detectors and the samples were tilted 45 degrees with respect to the neutron beam direction to cover all the possible values of the emission angle of the fission fragments. The main features of this setup are discussed and results on the fission fragment angular distribution are provided for the Th-232(n,f) reaction around the fission threshold. The results are compared with the available data in the literature, demonstrating the good capabilities of this setup.
  •  
40.
  • Tarrío, Diego, et al. (författare)
  • Neutron-induced fission cross sections of Th-232 and U-233 up to 1 GeV using parallel plate avalanche counters at the CERN n_TOF facility
  • 2023
  • Ingår i: Physical Review C. - : American Physical Society. - 2469-9985 .- 2469-9993. ; 107:4
  • Tidskriftsartikel (refereegranskat)abstract
    • The neutron-induced fission cross sections of Th-232 and U-233 were measured relative to U-235 in a wide neutron energy range up to 1 GeV (and from fission threshold in the case of Th-232, and from 0.7 eV in case of U-233), using the white-spectrum neutron source at the CERN Neutron Time-of-Flight (n_TOF) facility. Parallel plate avalanche counters (PPACs) were used, installed at the Experimental Area 1 (EAR1), which is located at 185 m from the neutron spallation target. The anisotropic emission of fission fragments were taken into account in the detection efficiency by using, in the case of U-233, previous results available in EXFOR, whereas in the case of Th-232 these data were obtained from our measurement, using PPACs and targets tilted 45 degrees with respect to the neutron beam direction. Finally, the obtained results are compared with past measurements and major evaluated nuclear data libraries. Calculations using the high-energy reaction models INCL++ and ABLA07 were performed and some of their parameters were modified to reproduce the experimental results. At high energies, where no other neutron data exist, our results are compared with experimental data on proton-induced fission. Moreover, the dependence of the fission cross section at 1 GeV with the fissility parameter of the target nucleus is studied by combining those ( p, f) data with our (n, f) data on Th-232 and U-233 and on other isotopes studied earlier at n_TOF using the same experimental setup.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 31-40 av 110
Typ av publikation
tidskriftsartikel (106)
konferensbidrag (2)
forskningsöversikt (2)
Typ av innehåll
refereegranskat (110)
Författare/redaktör
Zychor, I (100)
Conroy, Sean (98)
Eriksson, Jacob, Dr, ... (98)
Andersson Sundén, Er ... (97)
Cecconello, Marco (97)
Hjalmarsson, Anders (97)
visa fler...
Possnert, Göran, 195 ... (96)
Weiszflog, Matthias (96)
Sjöstrand, Henrik, 1 ... (95)
Ericsson, Göran (94)
Rubel, Marek (79)
Dzysiuk, N. (78)
Frassinetti, Lorenzo (74)
Hellsten, Torbjörn (65)
Ström, Petter (65)
Weckmann, Armin (65)
Menmuir, Sheena (63)
Bykov, Igor (63)
Stefanikova, Estera (60)
Bergsåker, Henric (55)
Rachlew, Elisabeth, ... (55)
Hellesen, Carl, 1980 ... (53)
Johnson, Thomas (52)
Petersson, Per (52)
Tholerus, Emmi (52)
Binda, F. (51)
Skiba, M. (51)
Skiba, Mateusz, 1985 ... (50)
Olivares, Pablo Vall ... (50)
Binda, Federico, 198 ... (49)
Ratynskaia, Svetlana (49)
Hellesen, C (48)
Tolias, Panagiotis (48)
Dzysiuk, Nataliia (44)
Garcia-Carrasco, Alv ... (43)
Heinola, K (40)
Zhou, Yushun (40)
Likonen, J (33)
Delabie, E (32)
Alves, E (32)
Catarino, N. (32)
Duran, I (31)
Giroud, C (31)
Lupelli, I. (31)
Coad, J. P. (31)
Brezinsek, S (30)
Meneses, L (30)
Nunes, I (30)
Matthews, G. F. (30)
Tokitani, M. (30)
visa färre...
Lärosäte
Uppsala universitet (108)
Kungliga Tekniska Högskolan (98)
Chalmers tekniska högskola (29)
Språk
Engelska (110)
Forskningsämne (UKÄ/SCB)
Naturvetenskap (110)
Teknik (14)

År

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy